Microchip Technology

MCP604T-I/SL - 2.8MHz Quad RRO Op Amp | Microchip Technology

MPN: MCP604T-I/SL ✓ Hoạt động
2.7 V Vdss 230 µA per amplifier Id 14-pin SOIC, 3.90 mm width Package
MOQ: 1 |

MCP604T-I/SL Tóm tắt

The Microchip Technology MCP604T-I/SL is a four-channel CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, rail-to-rail output, and operation from a single supply as low as 2.7 V. The device is packaged in a 14-pin SOIC and is specified for an industrial temperature range of -40°C to +85°C.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify weak sensor signals, buffer inputs, compare voltages, and drive control signals. The MCP604 belongs to the hierarchy of op amps, analog amplifiers, interface ICs, and semiconductors. Its four integrated amplifiers reduce component count in multi-channel instrumentation while preserving consistent electrical performance across each channel.

Principal features include a 2.8 MHz gain-bandwidth product, typical supply current of 230 µA per amplifier, input bias current of 1 pA, slew rate of 2.3 V/µs, and maximum input offset voltage of 2 mV. The rail-to-rail output stage supports low-voltage signal chains where the useful output range must approach the supply rails.

The MCP604 family uses Microchip's advanced CMOS technology to combine low bias current, high open-loop gain, and low operating current in a compact quad configuration. Each amplifier is unity-gain stable, simplifying buffer and general-purpose voltage-feedback layouts. Operation from 2.7 V supports battery-powered and modern low-voltage embedded systems without requiring a negative supply.

Typical uses include portable instrumentation, battery-operated sensor interfaces, industrial control modules, low-voltage data acquisition, audio signal conditioning, and general-purpose analog signal chains. Four channels in one package are particularly useful when several independent sensor outputs must be amplified with comparable circuitry.

When designing around the MCP604T-I/SL, maintain adequate output headroom for the connected load and account for input and output capacitance when estimating stability and bandwidth. Bypass the supply pins with a local ceramic capacitor and route sensitive input traces away from switching nodes and high-current return paths.

This product overview consolidates the device's core electrical characteristics, package information, sourcing guidance, comparison options, and application guidance. It also highlights practical differences among pin-compatible options so engineers can select a replacement according to grade, bandwidth, offset, and application requirements rather than package designation alone.

Bộ thay thế dễ dàng lắp đặt cho MCP604T-I/SL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP604T-I/SL (cùng hình factor và footprint) — khác nhau ở Package, Mounting Type, Amplifier Type, Typical Operating Current, Input Bias Current.

Microchip Technology
Package: 14-DIP (0.300 inch, 7.62 mm)
Mounting Type: Through-hole insertion
Amplifier Type: General Purpose
Microchip Technology
Package: 14-pin PDIP
Mounting Type: Through-hole
Amplifier Type: Low-power CMOS operational amplifier
Microchip Technology
Amplifier Type: Quad CMOS operational amplifier
Typical Operating Current: 230 uA
Microchip Technology
Package: 14-pin SOIC
Amplifier Type: Quad CMOS operational amplifier
Typical Operating Current: 230 µA

MCP604T-E/SL

✅ Drop-In
Microchip Technology
📦 14-pin SOIC
Quad CMOS operational amplifier · 4 channels · 2.8 MHz · 2.3 V/µs · 230 µA · 2.7 V · 6 V · 1 pA

Liên hệ để biết giá

Xem tài liệu →

MCP604-I/SL

✅ Drop-In
Microchip Technology
📦 14-pin SOIC
Quad CMOS operational amplifier · 4 circuits · 2.8 MHz · 230 uA · 2.7 V to 6.0 V · 2.7 V · 2,000 uV · Rail-to-rail

Liên hệ để biết giá

Xem tài liệu →

MCP6024T-I/SL

✅ Drop-In
📦 14-pin SOIC
Same four-channel CMOS amplifier and 14-pin SOIC footprint, but the MCP6024 family has a lower gain-bandwidth product than the MCP604's 2.8 MHz, making it suitable only when the reduced bandwidth remains acceptable.

📋 Tham chiếu thay thế (không có trong danh mục)

MCP6004T-I/SL

✅ Drop-In
📦 14-pin SOIC
Same quad CMOS topology and 14-pin SOIC footprint, but the MCP6004 family provides lower bandwidth than the MCP604's 2.8 MHz gain-bandwidth product; suitability depends on the required closed-loop bandwidth.

📋 Tham chiếu thay thế (không có trong danh mục)

MCP6002T-I/SNVAO

✅ Drop-In
📦 14-pin SOIC
The MCP6002T-I/SNVAO uses the related 14-pin SOIC footprint but has a lower bandwidth class than the MCP604's 2.8 MHz gain-bandwidth product, so it is limited to applications where the reduced speed is acceptable.

📋 Tham chiếu thay thế (không có trong danh mục)

MCP604T-I/SL Tỷ lệ tối đa & tính chất điện

Amplifier Count 4 channels
Product Type CMOS operational amplifier
Gain-Bandwidth Product 2.8 MHz
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 6.0 V
Typical Supply Current 230 µA per amplifier
Input Bias Current 1 pA
Slew Rate 2.3 V/µs
Maximum Input Offset Voltage 2 mV
Output Swing Rail-to-rail
Unity-Gain Stability Yes
Khoảng nhiệt độ hoạt động -40°C to +85°C
Hộp 14-pin SOIC, 3.90 mm width
Kiểu lắp đặt Surface mount
Automotive Qualification AEC-Q100
Supply Configuration Single supply

Cấu hình chân MCP604T-I/SL

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Chân 1 OUTA — Amplifier A output
Chân 2 -INA — Inverting input for amplifier A
Chân 3 +INA — Noninverting input for amplifier A
Chân 4 V- — Negative supply connection
Chân 5 +INB — Noninverting input for amplifier B
Chân 6 -INB — Inverting input for amplifier B
Chân 7 OUTB — Amplifier B output
Chân 8 OUTC — Amplifier C output
Chân 9 -INC — Inverting input for amplifier C
Chân 10 +INC — Noninverting input for amplifier C
Chân 11 V+ — Positive supply connection
Chân 12 +IND — Noninverting input for amplifier D
Chân 13 -IND — Inverting input for amplifier D
Chân 14 OUTD — Amplifier D output

Ứng dụng tiêu biểu

MCP604T-I/SL phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Conditioning, Industrial Control and Instrumentation, Low-Voltage Data Acquisition, Portable Medical and Monitoring Equipment, Audio and Low-Frequency Signal Conditioning, Automotive Auxiliary Signal Interfaces.

🔋

Battery-Powered Sensor Conditioning

The MCP604T-I/SL fits low-voltage sensor front ends because each of its four channels operates from a single supply as low as 2.7 V, draws a typical 230 µA per amplifier, and has an input bias current of 1 pA. The low bias current helps preserve signals from high-impedance sensors, while the four-channel package can condition multiple outputs without adding four separate packages. Each amplifier is unity-gain stable, allowing direct buffering when the source impedance requires it. The 2.3 V/µs slew rate and 2.8 MHz gain-bandwidth product also provide more bandwidth than many low-power sensors require, but the design should still verify the common-mode range, output swing, sensor settling time, and supply-current budget.

🏭

Industrial Control and Instrumentation

MCP604T-I/SL is appropriate for industrial instrumentation requiring multiple low-power analog channels within a -40°C to +85°C operating range. Its four rail-to-rail-output amplifiers can buffer sensor inputs, amplify control signals, or drive moderate loads from one 14-pin SOIC package. The 2.8 MHz gain-bandwidth product gives sufficient loop bandwidth for many slow process-control and measurement paths, while the 2 mV maximum input offset supports signal integrity in practical instrumentation. Designers should verify the output-current demand, capacitive loading, analog ground arrangement, and input filtering at each channel. The industrial temperature range makes the device more broadly suitable than a consumer-grade amplifier when equipment may operate outside room temperature.

📟

Low-Voltage Data Acquisition

The MCP604T-I/SL can implement a compact four-channel analog acquisition front end when each channel needs buffering or moderate amplification. Its 1 pA input bias current minimizes loading on high-impedance sources, and the 2.8 MHz gain-bandwidth product allows closed-loop gains to be selected according to the required signal bandwidth. Rail-to-rail output operation improves usable range in 2.7 V systems where conventional non-rail-to-rail amplifiers could lose swing. In a practical circuit, place the amplifier close to the sensor or connector, use short protected input routes, and add an anti-alias filter before any switching converter or higher-bandwidth stage. The 2 mV maximum offset and 2.3 V/µs slew rate must be included in the error and settling analysis.

💊

Portable Medical and Monitoring Equipment

The MCP604T-I/SL can support low-level signal conditioning in portable monitoring equipment when the device's noise, offset, and input characteristics satisfy the measurement specification. Its four channels reduce board area for multielectrode, pressure, or biosensor interfaces, while single-supply operation from 2.7 V supports compact battery-powered designs. The 1 pA input bias current is useful with high-impedance sources, and the unity-gain-stable configuration simplifies isolation and follower stages. Designers must account for leakage current through board contaminants, patient protection requirements, input protection networks, and the difference between input offset and the complete error budget. These system protections are separate from the amplifier specifications and should be validated according to the applicable product requirements.

🎧

Audio and Low-Frequency Signal Conditioning

MCP604T-I/SL can serve as a general-purpose amplifier in low-frequency audio, control, and communication paths where rail-to-rail output and low bias current are more important than wideband performance. The 2.8 MHz gain-bandwidth product supports channels through the audio band and beyond, while the 2.3 V/µs slew rate helps produce clean output transitions into moderate loads. Its four independent channels can support mixer, headphone-buffer, or interface stages, although the MCP604 is not a specialized audio amplifier and does not by itself guarantee low distortion at every gain and load. PCB design should keep input and output paths short, maintain symmetric feedback routing, and connect the bypass capacitor close to the supply pins to suppress supply ripple.

🚗

Automotive Auxiliary Signal Interfaces

MCP604T-I/SL is identified for automotive AEC-Q100 applications in a 14-pin SOIC package, making it relevant for low-speed auxiliary signal interfaces rather than high-bandwidth safety-critical processing. Its four rail-to-rail-output channels can buffer switches, sensors, or diagnostic signals, and operation from 2.7 V supports modern low-voltage vehicle electronics. The -40°C to +85°C industrial range covers many cabin and external electronics environments. Automotive qualification does not mean the part is suitable for every safety-critical function; engineers must apply the vehicle OEM's own qualification, transient, immunity, and functional-safety requirements. Protection networks, ground-bounce margins, and diagnostic coverage also require system-level validation.

Tóm tắt các sản phẩm được đề xuất

MCP604-I/SL Microchip Technology Được sử dụng trong: Battery-Powered Sensor Conditioning, Portable Medical and Monitoring Equipment MCP6024T-I/SL Related low-power quad amplifier option Được sử dụng trong: Battery-Powered Sensor Conditioning, Low-Voltage Data Acquisition, Audio and Low-Frequency Signal Conditioning, Automotive Auxiliary Signal Interfaces MCP604T-E/SL Microchip Technology Được sử dụng trong: Industrial Control and Instrumentation, Automotive Auxiliary Signal Interfaces MCP6004T-I/SL Related 14-pin quad instrumentation amplifier Được sử dụng trong: Industrial Control and Instrumentation, Portable Medical and Monitoring Equipment, Audio and Low-Frequency Signal Conditioning MCP6002T-I/SNVAO Related quad low-voltage signal conditioner Được sử dụng trong: Low-Voltage Data Acquisition
What are the key specifications of MCP604T-I/SL that engineers should know?
The MCP604T-I/SL is a four-channel CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 µA typical supply current per amplifier, 1 pA input bias current, and rail-to-rail output. According to the Microchip Technology manufacturer datasheet, it operates from a single 2.7 V to 6.0 V supply and is packaged in a 14-pin SOIC.
Where can I download the MCP604T-I/SL datasheet PDF?
The official MCP604 family documentation is available from the Microchip Technology MCP604 product page at https://www.microchip.com/en-us/product/MCP604. The page provides the manufacturer datasheet, product details, CAD resources, and ordering information for the MCP604T-I/SL and related temperature-grade variants.
Where can I find the MCP604T-I/SL pinout?
The MCP604T-I/SL pinout is shown in the pin-description table and package drawing in the Microchip Technology MCP604 manufacturer datasheet. The device uses a 14-pin SOIC with four complete operational-amplifier channels, and engineers should use the datasheet drawing when assigning PCB tracks and confirming each input, output, and supply connection.
What is the supply voltage range of MCP604T-I/SL?
The MCP604T-I/SL operates from 2.7 V to 6.0 V with a single supply. According to the Microchip Technology manufacturer datasheet, this range supports low-voltage embedded systems and portable equipment. The input common-mode and output-swing limits must still be checked for the selected supply and load conditions.
How fast is the MCP604T-I/SL?
The MCP604T-I/SL has a 2.8 MHz gain-bandwidth product and a 2.3 V/µs slew rate. According to the Microchip Technology manufacturer datasheet, each amplifier is unity-gain stable, allowing it to be used directly as a buffer or in general-purpose voltage-feedback designs where those bandwidth and transient-response characteristics are adequate.
Is MCP604T-I/SL suitable for battery-powered sensor interfaces?
Yes, the MCP604T-I/SL is suitable for many battery-powered sensor interfaces because it operates from 2.7 V and typically consumes 230 µA per amplifier. Its 1 pA input bias current also helps preserve high-impedance sensor signals. The four channels can amplify or buffer several sensor outputs while keeping the system supply voltage low.
MCP604T-I/SL vs MCP6024T-I/SL - which is better for a low-frequency sensor amplifier?
The MCP604T-I/SL is the better choice when higher closed-loop bandwidth is required, because its gain-bandwidth product is 2.8 MHz. MCP6024T-I/SL is a related 14-pin quad amplifier intended for lower-bandwidth signal conditioning. The exact offset, noise, and current differences should be checked in the manufacturer documentation before making a direct substitution.
MCP604T-I/SL vs MCP6004T-I/SL - what is the main difference?
The principal difference is bandwidth: the MCP604T-I/SL provides a 2.8 MHz gain-bandwidth product, while MCP6004T-I/SL belongs to the lower-bandwidth MCP6004 family. Both are presented as 14-pin quad CMOS operational-amplifier options, so MCP6004T-I/SL is worth evaluating for slower sensors or cost-sensitive applications after checking its electrical limits.
When should I choose MCP604T-I/SL over MCP6024T-I/SL?
Choose MCP604T-I/SL when the design needs more bandwidth than the MCP6024T-I/SL family provides or when its 2.8 MHz gain-bandwidth product better matches the required response time. For slow sensor signals, compare offset voltage, supply current, output swing, and stability before selecting the part with the lower necessary performance.
What is the best drop-in replacement for MCP604T-I/SL?
The closest same-footprint options include MCP604T-E/SL and MCP604-I/SL, both from Microchip Technology, although their temperature grades or packing differ from the target. MCP6024T-I/SL and MCP6004T-I/SL can also occupy a 14-pin SOIC footprint, but their bandwidth and other electrical characteristics must be checked before treating them as drop-in replacements.
Can MCP604T-E/SL replace MCP604T-I/SL?
The MCP604T-E/SL can be a drop-in electrical and footprint match for MCP604T-I/SL when its temperature grade satisfies the application. Both are 14-pin SOIC quad rail-to-rail CMOS operational amplifiers in the MCP604 family, but the operating-temperature specification and product qualification requirements must be reviewed before substitution.
Where to buy MCP604T-I/SL online and what is its price?
Use the Request a Quote form on this page to request current MCP604T-I/SL pricing, stock confirmation, lead time, and order quantities. The form is the appropriate channel for a quote because market availability and commercial terms can change. The manufacturer identifies the device as a 14-pin SOIC quad amplifier with 2.8 MHz bandwidth.
What is the lead time for MCP604T-I/SL?
The current lead time for MCP604T-I/SL should be requested through the Request a Quote form on this page, including the required quantity and manufacturing format. Microchip Technology lists the device in a 14-pin SOIC package, and the manufacturer product page provides the authoritative package, temperature, and ordering information.
Is MCP604T-I/SL in stock?
Current MCP604T-I/SL inventory should be confirmed through the Request a Quote form on this page. Availability can vary by package, packing format, quantity, and regional logistics. The target device is a 2.8 MHz, four-channel CMOS operational amplifier in a 14-pin SOIC with an industrial temperature range.
What is the best Microchip Technology equivalent for MCP604T-I/SL?
MCP604T-E/SL is the closest same-family option because it retains the MCP604 quad, 14-pin SOIC architecture and differs principally in temperature grade. MCP604-I/SL is another family option with tube packing, while MCP6024T-I/SL and MCP6004T-I/SL are related 14-pin devices whose lower bandwidth may or may not meet the design requirements.
What can replace MCP604T-I/SL without changing the PCB footprint?
Several Microchip Technology devices use the same 14-pin SOIC footprint, including MCP604T-E/SL, MCP604-I/SL, MCP6024T-I/SL, and MCP6004T-I/SL. A footprint-compatible part is not automatically a drop-in replacement: confirm supply range, gain-bandwidth product, offset, output swing, temperature grade, and AEC-Q100 requirements for the intended application.

Dữ liệu tham khảo kỹ thuật cho MCP604T-I/SL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MCP604T-I/SL for a four-channel, low-power design that requires 2.8 MHz gain-bandwidth product, 1 pA input bias current, rail-to-rail output, and operation from a single 2.7 V supply. MCP604T-E/SL is the closest family alternative when an extended commercial temperature grade is needed, while MCP604-I/SL retains the same electrical characteristics in tube packing. Consider MCP6024T-I/SL for lower-bandwidth signal conditioning where its reduced speed remains acceptable, and MCP6004T-I/SL when its lower-bandwidth family is adequate for the measurement path. MCP6002T-I/SNVAO is another same-footprint quad option for suitably low-speed applications. Because several alternatives share the 14-pin SOIC outline, compare bandwidth, offset, input bias current, supply current, output swing, temperature range, and qualification requirements before treating any device as a drop-in replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MCP604T-E/SL MCP604-I/SL MCP6024T-I/SL MCP6004T-I/SL MCP6002T-I/SNVAO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin SOIC 14-pin SOIC - same 14-pin SOIC - same 14-pin SOIC - same 14-pin SOIC - same 14-pin SOIC - same
Amplifier Count 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels

Bảo phân biệt quan trọng

  • Higher gain-bandwidth product within the directly compared quad families (vsMCP6024T-I/SL)
  • Very low input bias current for high-impedance signal sources (vsMCP6004T-I/SL)
  • Low quiescent current with four integrated channels (vsMCP604-I/SL)

Ghi chú thiết kế

Place the supply bypass capacitor immediately between the V+ and V- pins, with a short, low-inductance connection to the ground plane. Route the four channels to minimize loop area and keep feedback resistors close to their associated amplifier pins. Sensitive inputs should remain away from switching-regulator nodes, relay contacts, and high-current output traces to reduce coupled noise.

Do not assume that a 14-pin SOIC footprint alone guarantees an equivalent amplifier. MCP604T-E/SL, MCP604-I/SL, MCP6024T-I/SL, MCP6004T-I/SL, and MCP6002T-I/SNVAO differ in temperature grade, bandwidth class, packing, or detailed electrical limits. Before substitution, confirm the input common-mode range, output swing, gain-bandwidth product, offset, bias current, supply current, slew rate, and AEC-Q100 requirements.

The MCP604 is unity-gain stable, but practical stability still depends on output loading and feedback topology. Avoid placing large capacitive loads directly on an output unless the operating frequency and amplifier configuration have been checked. For source impedances above the recommended range, minimize trace length, maintain a stable reference return, and consider buffering the source before adding further gain.

Budget supply current for four amplifiers rather than one because each channel typically draws 230 µA. In battery systems, include quiescent current, regulator efficiency, and any output-current demand in the operating profile. The 2.7 V minimum supply also constrains input and output headroom, so downstream and upstream levels should be checked against the device's common-mode and rail-to-rail operating characteristics.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Arrow listing identifies MCP604T-I/SL as an automotive AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are unknown.

Tìm kiếm liên quan

MCP604T-I/SL datasheet MCP604T-I/SL pinout MCP604T-I/SL datasheet pdf MCP604T-I/SL specifications MCP604T-I/SL price MCP604T-I/SL stock MCP604T-I/SL equivalent MCP604T-I/SL replacement MCP604T-I/SL vs MCP6024T-I/SL MCP604T-I/SL footprint MCP604T-I/SL application circuit Microchip Technology MCP604T-I/SL

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP604T-I/SL MCP604 MCP604T-E/SL MCP604-I/SL MCP6024T-I/SL MCP6004T-I/SL MCP6002T-I/SNVAO operational amplifier op amp quad amplifier CMOS analog amplifier interface IC semiconductor rail-to-rail output unity-gain stable gain-bandwidth product input bias current slew rate input offset voltage 14-pin SOIC SOIC package family surface mount AEC-Q100
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ