Microchip Technology

MCP6064-E/ST - Quad 1.8V Precision R-R Op Amp | Microchip

MPN: MCP6064-E/ST ✓ Hoạt động
1.8 V Vdss 60 µA per amplifier typical Id 14-pin TSSOP Package
MOQ: 1 |

MCP6064-E/ST Tóm tắt

The Microchip Technology MCP6064-E/ST is a quad, rail-to-rail input and output CMOS operational amplifier with a 1.8 V minimum supply, 730 kHz typical gain-bandwidth product, and 14-pin TSSOP package. The -E suffix identifies the extended-temperature grade, while /ST identifies the TSSOP package and tube ordering option. It is designed for compact analog signal-conditioning systems requiring four amplifiers, low power consumption, and rail-to-rail operation.

An operational amplifier is an analog building block used to amplify, buffer, filter, or compare small voltage signals. The MCP6064 belongs to the operational-amplifier hierarchy within analog ICs and amplifier ICs. Rail-to-rail input operation allows the amplifier to process signals close to either supply rail, while rail-to-rail output improves dynamic range in low-voltage systems. Its unity-gain stability permits use as a voltage follower without external compensation.

The MCP6064-E/ST provides four amplifiers in one package, reducing board area compared with four separate single amplifiers. Key characteristics include maximum input offset voltage of ±150 µV, typical gain-bandwidth product of 730 kHz, and low quiescent current of 60 µA per amplifier. Rail-to-rail input and output operation supports single-supply systems operating from 1.8 V, while the listed 6 V maximum rating provides compatibility with conventional 3.3 V and 5 V analog rails.

Each amplifier in the quad package is designed around CMOS analog circuitry optimized for precision and low power. A 730 kHz gain-bandwidth product supports moderate-bandwidth gain and filtering stages without requiring a high-speed, high-power amplifier. Unity-gain stability is particularly useful for ADC drivers, sensor buffers, and active-filter inputs. Because four amplifiers share one package, engineers should account for common supply current, thermal behavior, and package-level decoupling when planning the complete analog front end.

Typical uses include battery-powered sensor interfaces, precision current measurement, low-frequency active filters, audio preamplification, industrial instrumentation, and automotive sensing. The 14-pin TSSOP outline is compact but requires careful handling of fine-pitch leads. In a 3.3 V or 5 V design, confirm signal amplitudes, output-load limits, stability, and the amplifier's operating range before finalizing the gain and filtering network.

Decouple the supply pins with a short-path ceramic capacitor and keep feedback components close to their associated amplifier inputs and outputs. Avoid long traces around high-impedance nodes because input bias current and parasitic capacitance can shift offset and degrade stability. For applications requiring the lowest input error, use the maximum input offset voltage rather than the typical value when setting system tolerances.

This page combines manufacturer-family specifications, package information, application guidance, comparison criteria, and practical design notes. It also identifies which proposed replacements have a defensible 14-TSSOP drop-in basis and which characteristics still require independent engineering review before schematic approval.

Bộ thay thế dễ dàng lắp đặt cho MCP6064-E/ST — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MCP6064T-E/ST

✅ Drop-In
📦 14-pin TSSOP
Same 730 kHz typical gain-bandwidth product and 60 µA per-amplifier typical quiescent current; ordering format changes from tube to tape-and-reel

📋 Tham chiếu thay thế (không có trong danh mục)

MCP6004-I/ST

✅ Drop-In
📦 14-pin TSSOP
Uses the same 14-pin TSSOP family outline but belongs to a different amplifier family; target gain-bandwidth product is 730 kHz while MCP6004 family bandwidth must be confirmed against its datasheet

📋 Tham chiếu thay thế (không có trong danh mục)

LMV324IPT

✅ Drop-In
📦 14-pin TSSOP
1 MHz gain-bandwidth product versus 730 kHz on MCP6064-E/ST, and minimum supply is 2.7 V versus 1.8 V

📋 Tham chiếu thay thế (không có trong danh mục)

MCP6064-E/ST Tỷ lệ tối đa & tính chất điện

Amplifier Count 4 amplifiers
Minimum Single-Supply Voltage 1.8 V
Maximum Supply Voltage 6 V
Input Offset Voltage ±150 µV maximum
Gain-Bandwidth Product 730 kHz typical
Điện áp yên tĩnh 60 µA per amplifier typical
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Process Technology CMOS
Hộp 14-pin TSSOP
Kiểu lắp đặt Surface mount
Temperature Grade Extended-temperature grade
Automotive Qualification AEC-Q100 qualified
Supplier Tube Description 14-pin TSSOP tube
Product Type Precision CMOS operational amplifier

Hướng dẫn cấu hình chân MCP6064-E/ST 14-pin tssop

Cấu hình chân cho MCP6064-E/ST (14-pin tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14-pin tssop cho MCP6064-E/ST

Không có dữ liệu chân cụ thể sẵn có cho MCP6064-E/ST.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP6064-E/ST phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Interfaces, Precision Current Measurement, Low-Frequency Active Filters, Industrial Instrumentation, Audio and Microphone Preamplification, Automotive and Vehicle Sensing.

🔋

Battery-Powered Sensor Interfaces

The MCP6064-E/ST fits low-power sensor front ends because each amplifier operates from a supply as low as 1.8 V and consumes 60 µA typical quiescent current. Rail-to-rail input operation preserves signal range when a sensor output approaches either supply rail, an important consideration for resistive dividers and low-voltage current sensors. Four amplifiers in one 14-pin TSSOP can provide input buffering, gain, active filtering, and an output driver without requiring four separate packages. Keep high-impedance sensor connections short and evaluate total quiescent current across all four channels when calculating battery life.

⚡

Precision Current Measurement

The MCP6064-E/ST is suitable for amplifying the small differential voltage generated by a shunt or current-sense resistor in a precision measurement channel. Its maximum input offset voltage of ±150 µV helps limit error near the measurement floor, while the 730 kHz typical gain-bandwidth product is adequate for moderate-bandwidth current loops and control signals. Rail-to-rail input and output operation supports low-voltage instrumentation. The design should still budget resistor tolerance, amplifier input bias current, Kelvin routing, and gain error; the 14-pin TSSOP package does not eliminate analog-layout sensitivity.

📡

Low-Frequency Active Filters

The unity-gain-stable MCP6064-E/ST can implement low-frequency active-filter stages where a 730 kHz gain-bandwidth product provides adequate closed-loop bandwidth. The quad package allows a second-order filter to use one section and leaves three channels available for gain, buffering, or offset conditioning. Its low 60 µA-per-amplifier quiescent current is beneficial in portable measurement equipment. Select resistor and capacitor values with phase-margin and noise considerations, and simulate the complete filter with the intended load because parasitic capacitance and rail-to-rail transition behavior can influence the final response.

🏭

Industrial Instrumentation

The MCP6064-E/ST can condition low-level industrial sensor signals in compact control and monitoring modules. Its rail-to-rail I/O operation allows useful signal coverage in 3.3 V and 5 V systems, while the maximum input offset voltage of ±150 µV supports precision-oriented measurement chains. The four integrated channels reduce board area for amplifier, buffer, and comparator stages. For industrial equipment, evaluate electromagnetic interference, temperature margin, supply sequencing, and grounding. The TSSOP outline is compact, so assembly processes must provide suitable fine-pitch handling and adequate copper routing around sensitive inputs.

🎧

Audio and Microphone Preamplification

The MCP6064-E/ST can provide low-level preamplification and buffering in compact audio or microphone modules. Rail-to-rail input operation is useful when the available headroom around the bias point is limited, and four channels allow microphone, headphone, auxiliary, or line-processing functions to share a compact package. The 730 kHz typical gain-bandwidth product supports low-to-moderate audio bandwidth rather than high-frequency audiophile chains. Verify input-noise performance, maximum output swing, capacitive-load stability, and channel-to-channel matching against the microphone impedance and amplifier gain used in the design.

🚗

Automotive and Vehicle Sensing

The MCP6064-E/ST is identified in automotive-grade distributor records with AEC-Q100 qualification, making it a candidate for low-voltage vehicle sensing and control interfaces. Its 1.8 V minimum supply and 60 µA typical quiescent current per amplifier support compact electronics operating close to battery rails, while rail-to-rail I/O improves usable signal range. Confirm the exact qualification level, temperature grade, production status, and AEC-Q100-related part documentation for the production program. Transient protection, load-dump exposure, ground-offset behavior, and EMI requirements must also be handled at the system level.

Tóm tắt các sản phẩm được đề xuất

MCP6064-E/ST Microchip Technology Được sử dụng trong: Battery-Powered Sensor Interfaces, Precision Current Measurement, Low-Frequency Active Filters, Industrial Instrumentation, Audio and Microphone Preamplification, Automotive and Vehicle Sensing MCP6061-E/ST Single-channel member of the same amplifier family Được sử dụng trong: Battery-Powered Sensor Interfaces, Audio and Microphone Preamplification MCP6062-E/ST Dual-channel member of the same amplifier family Được sử dụng trong: Precision Current Measurement MCP6064T-E/ST Tape-and-reel ordering form of the same quad amplifier Được sử dụng trong: Low-Frequency Active Filters, Industrial Instrumentation, Automotive and Vehicle Sensing
What is the Microchip MCP6064-E/ST?
The MCP6064-E/ST is a quad precision CMOS operational amplifier with rail-to-rail input and output operation in a 14-pin TSSOP package. According to the Microchip MCP6064 product page, it offers a maximum input offset voltage of ±150 µV, a typical gain-bandwidth product of 730 kHz, and operation from a single supply as low as 1.8 V. It is unity-gain stable and suitable for low-voltage signal conditioning, buffering, filtering, and sensor-interface circuits.
What are the key specifications of MCP6064-E/ST that engineers should know?
The MCP6064-E/ST combines four unity-gain-stable amplifiers in a 14-pin TSSOP package. Its headline specifications include a 1.8 V minimum supply, 6 V maximum supply rating, 730 kHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, and 60 µA typical quiescent current per amplifier. According to the Microchip MCP6064 family description, both input and output operation extend to the supply rails, making the device useful in compact precision analog front ends.
Can MCP6064-E/ST run from a 1.8 V supply?
Yes, the MCP6064-E/ST operates from a single supply as low as 1.8 V. The Microchip MCP6064 product page identifies 1.8 V as the family's minimum supply voltage and states that the amplifiers maintain rail-to-rail input and output behavior. At 1.8 V, confirm the output-current capability, capacitive-load stability, and signal amplitude at the design temperature; rail-to-rail operation provides maximum usable input and output range near the supply limits.
Where can I download the MCP6064-E/ST datasheet PDF?
The manufacturer product page for the MCP6064-E/ST is available at the Microchip MCP6064 product URL listed on this page, where the family datasheet and ordering information can be accessed. The searchable part-document result also provides a dedicated MCP6064-E/ST datasheet entry. Use the manufacturer document for the authoritative pin description, electrical characteristics, recommended operating conditions, package drawings, and qualification details before assigning PCB tracks or approving a production design.
Where can I find the MCP6064-E/ST pinout?
Use the pin-description table and package drawing in the Microchip MCP6064 family datasheet to locate all 14 MCP6064-E/ST pins. The device is a quad amplifier, so its TSSOP outline contains four complete amplifier sections with their associated inputs, outputs, supply connections, and disable or configuration functions. Because the manufacturer excerpt does not enumerate every terminal, use that pin-description table directly when creating the symbol, test points, and PCB land pattern.
What is the difference between MCP6064-E/ST and MCP6064T-E/ST?
MCP6064-E/ST and MCP6064T-E/ST belong to the same MCP6064 electrical family and use the same 14-pin TSSOP outline, but their ordering suffixes indicate different packing arrangements. The T designation identifies the tape-and-reel ordering option, whereas the target /ST designation is listed as a tube. For PCB substitution, the electrical function and pin arrangement are the primary checks; manufacturing automation should confirm the required packing method before substitution.
Is MCP6064-E/ST suitable for battery-powered sensor designs?
The MCP6064-E/ST is well suited to battery-powered sensor interfaces because it operates from 1.8 V and consumes 60 µA typical quiescent current per amplifier. Rail-to-rail input operation is useful when sensor signals extend close to the supply rails, while the four-amplifier package can consolidate buffering, filtering, and gain stages. Designers should still account for sensor leakage, ADC input loading, and the total quiescent current of four amplifiers when calculating battery life.
MCP6064-E/ST vs MCP6004-I/ST: which is better for a precision analog front end?
Choose MCP6064-E/ST when low quiescent current and operation down to a 1.8 V supply are priorities; choose MCP6004-I/ST when its higher-bandwidth family characteristics better match the signal path. The MCP6064 family is specified at 730 kHz typical gain-bandwidth product and 60 µA per amplifier, with a maximum input offset voltage of ±150 µV. Compare the complete electrical tables, stability limits, and output drive requirements before treating either device as a functional substitute.
MCP6064-E/ST vs LMV324IPT: which is better for a 5 V application?
MCP6064-E/ST is preferable when rail-to-rail input operation and operation down to 1.8 V are important. The comparison listing identifies LMV324IPT as a 1 MHz, 2.7 V to 6 V, 14-pin TSSOP alternative, but its input range and precision characteristics must be checked against the circuit requirements. MCP6064-E/ST offers 730 kHz typical bandwidth, rail-to-rail I/O, and 60 µA per-amplifier typical quiescent current.
When should I choose MCP6064-E/ST over another 14-TSSOP amplifier?
Choose MCP6064-E/ST when the design needs four amplifiers in one 14-TSSOP package, rail-to-rail input and output operation, a 1.8 V minimum supply, or low 60 µA-per-amplifier quiescent current. A different quad amplifier may be preferable when wider bandwidth, lower offset, faster slew rate, lower noise, or a broader supply range is essential. Confirm stability with the intended feedback network, resistive load, and capacitive load before final selection.
What is the best drop-in replacement for MCP6064-E/ST?
MCP6064T-E/ST is the closest documented drop-in choice because it is the tape-and-reel ordering form of the same MCP6064 family and retains the 14-pin TSSOP package. Its electrical match is effectively identical, but the required packing differs from the target tube format. Before using it as a replacement, compare the manufacturer ordering table, pin configuration, temperature grade, and lifecycle status. Other candidates must pass the same package and electrical checks.
What can replace MCP6064-E/ST?
MCP6064T-E/ST can replace MCP6064-E/ST electrically while changing the ordering format from tube to tape-and-reel. The cross-reference listing also identifies MCP6004-I/ST as a 14-TSSOP comparison part. It is not electrically identical, so use it only after reviewing gain-bandwidth product, input offset voltage, common-mode range, output swing, quiescent current, stability, and disable-pin behavior. A physical footprint match alone does not guarantee functional interchangeability.
Is MCP6064-E/ST the same as MCP6004-I/ST?
No. MCP6064-E/ST and MCP6004-I/ST are not identical products even though both can appear in 14-pin TSSOP comparison lists. MCP6064-E/ST belongs to a low-power, rail-to-rail precision family with 730 kHz typical gain-bandwidth product, while MCP6004-I/ST belongs to a different Microchip amplifier family with different performance characteristics. Treat the relationship as a design-comparison candidate rather than an unconditional drop-in replacement.
Where can I buy MCP6064-E/ST and request a quote?
Use the Request a Quote form on this page to inquire about MCP6064-E/ST pricing, availability, lead time, and tube quantities. The part is identified as a 14-pin TSSOP, quad CMOS amplifier from Microchip Technology, and current commercial terms should be confirmed for the exact suffix. Provide your required quantity, date code policy, shipment destination, and whether partial reels or custom quantities are acceptable with the request.
What is the lead time for MCP6064-E/ST?
The current lead time for MCP6064-E/ST should be confirmed through the Request a Quote form on this page rather than inferred from a catalog page. Include the required tube quantity, approved date-code range, and destination country when requesting a quote. The target is an active Microchip Technology product in a 14-pin TSSOP tube package, but manufacturing availability and allocation can vary by order volume and date-code requirements.
Is MCP6064-E/ST in stock?
Stock status for MCP6064-E/ST should be checked through the Request a Quote form on this page. The manufacturer lists the MCP6064 family as active, and distributor records identify the exact 14-TSSOP tube ordering variant, but inventory can change between transactions. State the quantity and date-code constraints in the request so the commercial response reflects the parts that are actually available for allocation.

Dữ liệu tham khảo kỹ thuật cho MCP6064-E/ST — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MCP6064-E/ST when a four-channel precision amplifier must operate from 1.8 V, provide rail-to-rail input and output behavior, and fit in a 14-pin TSSOP package. Its 60 µA typical quiescent current per amplifier is especially useful in portable sensor systems. MCP6064T-E/ST is the closest functional choice for automated production because it retains the same electrical family while using tape-and-reel packing, although the ordering format must match the assembly process. Consider MCP6004-I/ST when its family-specific bandwidth, noise, offset, and supply characteristics provide a better match after reviewing its datasheet. LMV324IPT may suit a 2.7 V-to-6 V design requiring 1 MHz gain-bandwidth product, but its minimum supply is 0.9 V higher and its input/output range does not match the rail-to-rail specification of MCP6064-E/ST. For every candidate, verify the full pin description, disable behavior, stability, output drive, and operating temperature before approving it as a drop-in replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MCP6064T-E/ST MCP6004-I/ST LMV324IPT
Package 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Texas Instruments
Amplifier Count 4 4 4 4

Bảo phân biệt quan trọng

  • Lower minimum operating supply (vsLMV324IPT)
  • Rail-to-rail signal handling at low supply voltage (vsLMV324IPT)
  • Identical electrical family with production packing flexibility (vsMCP6064T-E/ST)

Ghi chú thiết kế

Place the supply bypass capacitor directly between the supply and ground pins, with the shortest possible traces and a ground connection that does not share a long return path with sensor signals. For a quad amplifier, follow the manufacturer pinout rather than assuming that all four channels are grouped identically. Keep feedback resistors close to their associated output and input pins, and route high-impedance inputs away from switching nodes, inductors, and the exposed underside of adjacent circuitry.

Unity-gain stability does not make every feedback network stable in practice. Check the gain-versus-frequency response with the intended source impedance, load capacitance, trace capacitance, and supply decoupling. Add an isolation resistor between the amplifier output and a difficult capacitive load when necessary, and keep the resistor close to the output pin. Verify rail-to-rail transition behavior in simulation or on hardware because crossover distortion can matter in low-signal-level instrumentation.

Do not treat the 730 kHz typical gain-bandwidth product as a guaranteed small-signal bandwidth at every closed-loop gain or output voltage. Use the manufacturer gain-bandwidth and phase-margin information to select a stable closed-loop gain, especially near unity gain. Also avoid assuming that the extended-temperature designation permits unrestricted automotive use. Confirm the exact AEC-Q100 qualification, temperature limits, and production-test requirements for the deployed operating environment.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MCP6064-E/ST product listing identifies the device as AEC-Q100 automotive qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MCP6064-E/ST datasheet MCP6064-E/ST pinout MCP6064-E/ST datasheet pdf MCP6064-E/ST equivalent MCP6064-E/ST replacement MCP6064-E/ST cross reference MCP6064-E/ST footprint MCP6064-E/ST price MCP6064-E/ST stock Microchip MCP6064-E/ST MCP6064 14-TSSOP pinout MCP6064 sensor signal conditioning

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP6064-E/ST MCP6064T-E/ST MCP6004-I/ST LMV324IPT operational amplifier precision amplifier quad amplifier analog IC CMOS rail-to-rail input rail-to-rail output unity-gain stable gain-bandwidth product input offset voltage quiescent current 14-pin TSSOP TSSOP package family surface-mount package 1.8 V operation precision sensor interface AEC-Q100 RoHS REACH
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ