Microchip Technology

MCP6071-E/SN - 1MHz Precision Op Amp | Microchip Technology

MPN: MCP6071-E/SN ✓ Hoạt động
1.8 V to 6 V Vdss 110 µA Id 8-pin SOIC Package
MOQ: 1 |

MCP6071-E/SN Tóm tắt

The Microchip Technology MCP6071-E/SN is a single-circuit precision operational amplifier with a 1.2 MHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, and rail-to-rail input and output operation. Designed for low-power applications, it operates from 1.8 V to 6 V and is packaged in an 8-pin SOIC.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify, buffer, filter, compare, and control voltage signals. The MCP6071 combines low supply current, wide input and output swing, low offset voltage, and unity-gain stability. Within the broader semiconductor hierarchy, it is an analog amplifier IC within the amplifier IC family and supports precision signal-conditioning systems operating from low-voltage rails.

The key features include ±150 µV maximum input offset voltage, a typical 1.2 MHz gain-bandwidth product, rail-to-rail input and output capability, and typical supply current of 110 µA. It is unity-gain stable, has built-in compensation, and includes reverse-phase input protection. These characteristics make it suitable for sensor interfaces, low-voltage analog signal chains, instrumentation, and portable equipment where low power and accurate DC behavior are important.

Microchip manufactures the MCP6071 family using a CMOS process designed for low-power, high-precision analog applications. Its rail-to-rail inputs allow the input common-mode voltage to extend close to the supply rails, while rail-to-rail output operation improves usable output swing. The 1.2 MHz typical gain-bandwidth product supports moderate-bandwidth signal conditioning, although the application band is also constrained by closed-loop gain, load, output-capacitance, and stability considerations.

Typical uses include buffering sensor outputs, amplifying low-level analog signals, current-to-voltage conversion, threshold detection, and active filtering in 1.8 V, 3.3 V, or 5 V systems. The low 110 µA typical supply current is especially useful in battery-operated instruments, while the low offset voltage improves accuracy in DC measurement and sensor-conditioning circuits.

When using the MCP6071-E/SN, check input and output common-mode limits under every load condition and confirm the required closed-loop gain against the gain-bandwidth product. Place input and output components close to the device, maintain a common ground reference, and verify stability with the intended load and decoupling network.

This page combines the manufacturer's core operating specifications with practical analog-design guidance, application scenarios, packaging information, and a constraint-based selection framework for engineers evaluating precision low-power op amps.

Bộ thay thế dễ dàng lắp đặt cho MCP6071-E/SN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

MCP6071-E/SN Tỷ lệ tối đa & tính chất điện

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range 1.8 V to 6 V
Typical Gain-Bandwidth Product 1.2 MHz
Maximum Input Offset Voltage ±150 µV
Typical Supply Current 110 µA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Compensation Built-in
Input Protection Reverse-phase input protection
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount
Temperature Grade Extended temperature grade
Automotive Qualification AEC-Q100

Hướng dẫn cấu hình chân MCP6071-E/SN 8-pin soic

Cấu hình chân cho MCP6071-E/SN (8-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin soic cho MCP6071-E/SN

Không có dữ liệu chân cụ thể sẵn có cho MCP6071-E/SN.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP6071-E/SN phù hợp cho 6 Áp dụngs: Low-Voltage Sensor Signal Conditioning, Portable Instrument Buffering, Current-to-Voltage Conversion, Active Low-Pass Filtering, Battery-Powered Analog Monitoring, Threshold and Comparator Circuit.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6071-E/SN fits sensor front ends that require accurate amplification near low supply rails. Its ±150 µV maximum input offset voltage limits DC error, while rail-to-rail input operation accepts a wide common-mode range around a 1.8 V to 6 V supply. Place the amplifier close to the sensor and analog controller, use short feedback paths, and include input-biasing components appropriate to the sensor's output impedance. The 1.2 MHz typical gain-bandwidth product is sufficient for moderate-bandwidth sensors but should be checked against the selected closed-loop gain.

🔧

Portable Instrument Buffering

The MCP6071-E/SN is useful as a unity-gain buffer in portable instrumentation because it is unity-gain stable and consumes a typical 110 µA. Rail-to-rail output operation helps preserve signal swing in 1.8 V, 3.3 V, and 5 V systems, while the 8-pin SOIC package supports conventional surface-mount assembly. Verify the source and load impedances, observe capacitive-load restrictions, and provide local supply decoupling to prevent reference noise from coupling into the measured signal.

📡

Current-to-Voltage Conversion

The MCP6071-E/SN can convert a small sensor current into a voltage by operating as a transimpedance amplifier. Its ±150 µV maximum input offset voltage contributes directly to the conversion error at the virtual-ground input, while rail-to-rail input and output behavior provide useful headroom in low-voltage systems. Select the feedback resistor for the required conversion gain, keep the input node compact, and account for the amplifier's 1.2 MHz typical gain-bandwidth product when evaluating bandwidth.

📶

Active Low-Pass Filtering

The MCP6071-E/SN is appropriate for first-order and modest higher-order active filters when low-voltage operation and low supply current are priorities. The 1.2 MHz typical gain-bandwidth product provides more bandwidth than many low-power filters require, while the ±150 µV maximum input offset voltage should be included in DC error analysis. Confirm loop gain and phase margin at the highest operating frequency, use stable resistor and capacitor values, and keep sensitive input nodes away from switching and digital return currents.

⚡

Battery-Powered Analog Monitoring

The MCP6071-E/SN supports battery-powered analog monitoring because it operates from 1.8 V to 6 V and has a typical supply current of 110 µA. Rail-to-rail input and output operation improves usable range in compact systems, and the low ±150 µV maximum offset is beneficial when monitoring slow signals with a controller's ADC. Evaluate the complete system's input bias current, noise, sleep-state behavior, and reference accuracy; the amplifier specification alone does not determine overall measurement resolution.

📺

Threshold and Comparator Circuit

The MCP6071-E/SN can create a threshold detector when the input signal is compared with a reference through the amplifier's inverting and non-inverting inputs. Its ±150 µV maximum input offset voltage helps limit threshold error, and rail-to-rail output operation provides useful logic-level swing in low-voltage systems. Keep the feedback arrangement consistent with the intended linear or comparator-like behavior, account for the 1.2 MHz typical bandwidth, and ensure the output remains within its rated common-mode and load limits.

What is the MCP6071-E/SN?
The MCP6071-E/SN is a single precision CMOS operational amplifier optimized for low-power, low-voltage analog signal conditioning. According to the Microchip manufacturer datasheet, it provides rail-to-rail input and output operation, a typical 1.2 MHz gain-bandwidth product, maximum input offset voltage of ±150 µV, and unity-gain stability in an 8-pin SOIC package.
What is the operating voltage of MCP6071-E/SN?
The MCP6071-E/SN operates from 1.8 V to 6 V. According to the Microchip manufacturer datasheet, this low-voltage range supports 1.8 V, 3.3 V, and 5 V systems. The rail-to-rail input and output architecture provides useful signal range near the supply limits, although the exact input and output limits must remain within the operating conditions stated in the datasheet.
What are the key specifications of MCP6071-E/SN that engineers should know?
The MCP6071-E/SN combines a 1.2 MHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, 110 µA typical supply current, and rail-to-rail input and output operation. According to the Microchip manufacturer datasheet, it is unity-gain stable, includes built-in compensation and reverse-phase input protection, and is offered in an 8-pin SOIC package for low-power precision analog circuits.
Where can I download the MCP6071-E/SN datasheet PDF?
The MCP6071-E/SN datasheet PDF is available from Microchip Technology at the official document URL listed on this page. The document covers the MCP6071, MCP6072, and MCP6074 family and includes electrical characteristics, application information, pin descriptions, and typical performance plots. Use the manufacturer document as the controlling reference for operating limits and test conditions.
Where can I find the MCP6071-E/SN pinout?
The MCP6071-E/SN pinout is shown in the pin-description section of the Microchip manufacturer datasheet. The device uses an 8-pin SOIC package, but the exact pin numbers and signal names should be assigned from the datasheet rather than inferred from the package outline. The manufacturer documentation identifies the single amplifier channel, supply connections, ground, and feedback-related terminals.
Is MCP6071-E/SN suitable for low-voltage sensor interfaces?
Yes, the MCP6071-E/SN is suitable for many low-voltage sensor interfaces because it operates from 1.8 V to 6 V, offers rail-to-rail input and output operation, and has a maximum input offset voltage of ±150 µV. According to the Microchip manufacturer datasheet, its typical 110 µA supply current also supports power-conscious instrumentation. Sensor output range, source impedance, and noise requirements still need to be checked.
What is the best drop-in replacement for MCP6071-E/SN?
The best drop-in replacement is the part that preserves the 8-pin SOIC footprint, pin functions, 1.8 V to 6 V supply range, rail-to-rail behavior, and required bandwidth. The manufacturer cross-reference search identifies MCP6071 as the supported family entry, while the SOT-23-5 MCP6071T-E/OT has a different footprint and is not a drop-in replacement. Request a formal compatibility review before substituting an unspecified amplifier.
Can MCP6071T-E/OT replace MCP6071-E/SN?
No, MCP6071T-E/OT is not a drop-in replacement for MCP6071-E/SN because one is packaged in SOT-23-5 and the other in 8-pin SOIC. Although both are members of the MCP6071 amplifier family, their PCB land patterns differ. MCP6071T-E/OT can serve as a functional alternative only when the PCB is redesigned for the SOT-23-5 footprint and its pin arrangement is reviewed.
MCP6071-E/SN vs MCP6071T-E/OT: which is better for a new PCB?
Choose MCP6071-E/SN when the board layout targets an 8-pin SOIC footprint; choose MCP6071T-E/OT when the board targets SOT-23-5. Both belong to the MCP6071 family and share the 1.2 MHz typical gain-bandwidth product and ±150 µV maximum offset specification. The deciding factors are therefore package size, PCB footprint, pin layout, and assembly requirements rather than basic amplifier gain bandwidth.
When should I choose MCP6071-E/SN over another low-power op amp?
Choose MCP6071-E/SN when the design needs a single amplifier with a 1.8 V to 6 V supply range, rail-to-rail input and output operation, unity-gain stability, and an 8-pin SOIC footprint. According to the Microchip manufacturer datasheet, its maximum input offset voltage is ±150 µV and typical supply current is 110 µA. Confirm that the selected alternative also satisfies channel count, noise, bias current, and stability requirements.
Is MCP6071-E/SN unity-gain stable?
Yes, the MCP6071-E/SN is unity-gain stable and uses built-in compensation. According to the Microchip manufacturer datasheet, the device has a typical gain-bandwidth product of 1.2 MHz and supports rail-to-rail input and output operation. Unity-gain stability makes the amplifier suitable for voltage followers and buffer configurations, subject to the datasheet's capacitive-load and output-voltage guidance.
Where to buy MCP6071-E/SN online?
Use the Request a Quote form on this page to request MCP6071-E/SN availability, quantity support, and current commercial terms. The exact MCP6071-E/SN orderable designation is the 8-pin SOIC version, so confirm that the quoted line item retains the full suffix. The manufacturer product page and official datasheet are the appropriate references for technical suitability.
What is the price of MCP6071-E/SN?
The current commercial price for MCP6071-E/SN should be obtained through the Request a Quote form on this page because quotation terms and quantity breaks can change. The product is identified as the Microchip 8-pin SOIC version with a 1.2 MHz typical gain-bandwidth product. Submit the required quantity and packaging details so the returned quotation corresponds to the exact orderable MPN.
What is the lead time for MCP6071-E/SN?
The current lead time for MCP6071-E/SN should be requested through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether the order must use the manufacturer's standard 8-pin SOIC shipping configuration. The Microchip product page and datasheet establish device identity and specifications, while current supply status requires a live quotation.
Is MCP6071-E/SN in stock?
Current MCP6071-E/SN inventory should be confirmed through the Request a Quote form on this page. The exact orderable device is Microchip's single-channel, 8-pin SOIC version with a 1.2 MHz typical gain-bandwidth product and ±150 µV maximum input offset voltage. Supply status can vary with quantity and date, so request a quotation against the full MPN rather than relying on a generic family listing.
What can replace MCP6071-E/SN?
A drop-in replacement for MCP6071-E/SN must use the same 8-pin SOIC footprint and preserve the amplifier's pin functions, 1.8 V to 6 V supply range, rail-to-rail operation, and approximately 1.2 MHz bandwidth. The manufacturer cross-reference search is the appropriate tool for a formal compatibility decision. The SOT-23-5 MCP6071T-E/OT is not pin-to-pin compatible and therefore is not a drop-in replacement.

Dữ liệu tham khảo kỹ thuật cho MCP6071-E/SN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MCP6071-E/SN for a single-channel, low-voltage precision analog design that uses an 8-pin SOIC footprint and benefits from rail-to-rail input and output operation. Its 1.8 V to 6 V supply range, ±150 µV maximum offset voltage, 110 µA typical supply current, and 1.2 MHz typical gain-bandwidth product make it particularly suitable for portable instrumentation, sensor conditioning, buffering, filtering, and threshold circuits. Review the MCP6071T-E/OT when PCB area is more important than footprint continuity; it uses SOT-23-5 and therefore requires a different land pattern and pin-layout review. For another amplifier to serve as a drop-in replacement, it must preserve the 8-pin SOIC pinout and meet the supply, offset, bandwidth, bias-current, noise, output-swing, and stability requirements of the intended circuit. Manufacturer cross-reference results and a detailed pin-description comparison should precede any substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 8-pin SOIC
Brand Microchip Technology
Number of Circuits 1 circuit
Supply Voltage Range 1.8 V to 6 V
Typical Gain-Bandwidth Product 1.2 MHz
Maximum Input Offset Voltage ±150 µV
Typical Supply Current 110 µA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Automotive Qualification AEC-Q100

Ghi chú thiết kế

Keep the op-amp input and feedback components close to the MCP6071-E/SN pins, and route sensitive signals away from switching-regulator outputs and high-current return paths. For transimpedance or precision gain stages, minimize parasitic capacitance at the summing node because it can reduce stability and alter the effective bandwidth. Place supply decoupling near the device and provide a low-impedance ground path.

Design the circuit across the full 1.8 V to 6 V operating range, including startup, load, and output-swing conditions. Rail-to-rail operation improves usable signal range but does not eliminate saturation limits caused by load current or output voltage. Confirm that the selected feedback network maintains a valid linear operating point and that the supply remains above the device's minimum operating voltage during power sequencing.

Do not assume that unity-gain stability permits every load condition. Check capacitive-load stability using the manufacturer guidance, keep the feedback network compact, and verify that the closed-loop gain is appropriate for the 1.2 MHz typical gain-bandwidth product. Also avoid treating the ±150 µV offset specification as a complete error budget; include bias current, noise, resistor tolerance, reference accuracy, and ADC error where applicable.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The distributor product listing identifies MCP6071-E/SN as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

mcp6071 datasheet MCP6071-E/SN datasheet MCP6071-E/SN pinout MCP6071-E/SN specifications MCP6071-E/SN equivalent MCP6071-E/SN replacement MCP6071-E/SN cross reference MCP6071-E/SN price MCP6071-E/SN stock MCP6071-E/SN application circuit MCP6071-E/SN vs MCP6071T-E/OT Microchip MCP6071-E/SN

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP6071-E/SN MCP6071 MCP6071T-E/OT operational amplifier op amp precision amplifier analog amplifier IC CMOS operational amplifier rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage unity-gain stable built-in compensation reverse-phase input protection AEC-Q100 8-pin SOIC SOIC family surface-mount package low-power analog sensor signal conditioning transimpedance amplifier active filter
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ