MCP6071-E/SN - 1MHz Precision Op Amp | Microchip Technology
Référence : MCP6071-E/SN ✓ ActifMCP6071-E/SN Présentation
An operational amplifier, or op amp, is a high-gain analog building block used to amplify, buffer, filter, compare, and control voltage signals. The MCP6071 combines low supply current, wide input and output swing, low offset voltage, and unity-gain stability. Within the broader semiconductor hierarchy, it is an analog amplifier IC within the amplifier IC family and supports precision signal-conditioning systems operating from low-voltage rails.
The key features include ±150 µV maximum input offset voltage, a typical 1.2 MHz gain-bandwidth product, rail-to-rail input and output capability, and typical supply current of 110 µA. It is unity-gain stable, has built-in compensation, and includes reverse-phase input protection. These characteristics make it suitable for sensor interfaces, low-voltage analog signal chains, instrumentation, and portable equipment where low power and accurate DC behavior are important.
Microchip manufactures the MCP6071 family using a CMOS process designed for low-power, high-precision analog applications. Its rail-to-rail inputs allow the input common-mode voltage to extend close to the supply rails, while rail-to-rail output operation improves usable output swing. The 1.2 MHz typical gain-bandwidth product supports moderate-bandwidth signal conditioning, although the application band is also constrained by closed-loop gain, load, output-capacitance, and stability considerations.
Typical uses include buffering sensor outputs, amplifying low-level analog signals, current-to-voltage conversion, threshold detection, and active filtering in 1.8 V, 3.3 V, or 5 V systems. The low 110 µA typical supply current is especially useful in battery-operated instruments, while the low offset voltage improves accuracy in DC measurement and sensor-conditioning circuits.
When using the MCP6071-E/SN, check input and output common-mode limits under every load condition and confirm the required closed-loop gain against the gain-bandwidth product. Place input and output components close to the device, maintain a common ground reference, and verify stability with the intended load and decoupling network.
This page combines the manufacturer's core operating specifications with practical analog-design guidance, application scenarios, packaging information, and a constraint-based selection framework for engineers evaluating precision low-power op amps.
Alternatives de remplacement direct pour MCP6071-E/SN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMCP6071-E/SN Valeurs maximales et caractéristiques électriques
| Amplifier Type | Single operational amplifier |
| Number of Circuits | 1 circuit |
| Supply Voltage Range | 1.8 V to 6 V |
| Typical Gain-Bandwidth Product | 1.2 MHz |
| Maximum Input Offset Voltage | ±150 µV |
| Typical Supply Current | 110 µA |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| Compensation | Built-in |
| Input Protection | Reverse-phase input protection |
| Boîtier | 8-pin SOIC |
| Type de montage | Surface mount |
| Temperature Grade | Extended temperature grade |
| Automotive Qualification | AEC-Q100 |
Guide de configuration des broches du MCP6071-E/SN 8-pin soic
Configuration des broches du MCP6071-E/SN (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour MCP6071-E/SN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCP6071-E/SN convient pour 6 applications: Low-Voltage Sensor Signal Conditioning, Portable Instrument Buffering, Current-to-Voltage Conversion, Active Low-Pass Filtering, Battery-Powered Analog Monitoring, Threshold and Comparator Circuit.
Low-Voltage Sensor Signal Conditioning
The MCP6071-E/SN fits sensor front ends that require accurate amplification near low supply rails. Its ±150 µV maximum input offset voltage limits DC error, while rail-to-rail input operation accepts a wide common-mode range around a 1.8 V to 6 V supply. Place the amplifier close to the sensor and analog controller, use short feedback paths, and include input-biasing components appropriate to the sensor's output impedance. The 1.2 MHz typical gain-bandwidth product is sufficient for moderate-bandwidth sensors but should be checked against the selected closed-loop gain.
Recommandé
Portable Instrument Buffering
The MCP6071-E/SN is useful as a unity-gain buffer in portable instrumentation because it is unity-gain stable and consumes a typical 110 µA. Rail-to-rail output operation helps preserve signal swing in 1.8 V, 3.3 V, and 5 V systems, while the 8-pin SOIC package supports conventional surface-mount assembly. Verify the source and load impedances, observe capacitive-load restrictions, and provide local supply decoupling to prevent reference noise from coupling into the measured signal.
Recommandé
Current-to-Voltage Conversion
The MCP6071-E/SN can convert a small sensor current into a voltage by operating as a transimpedance amplifier. Its ±150 µV maximum input offset voltage contributes directly to the conversion error at the virtual-ground input, while rail-to-rail input and output behavior provide useful headroom in low-voltage systems. Select the feedback resistor for the required conversion gain, keep the input node compact, and account for the amplifier's 1.2 MHz typical gain-bandwidth product when evaluating bandwidth.
Recommandé
Active Low-Pass Filtering
The MCP6071-E/SN is appropriate for first-order and modest higher-order active filters when low-voltage operation and low supply current are priorities. The 1.2 MHz typical gain-bandwidth product provides more bandwidth than many low-power filters require, while the ±150 µV maximum input offset voltage should be included in DC error analysis. Confirm loop gain and phase margin at the highest operating frequency, use stable resistor and capacitor values, and keep sensitive input nodes away from switching and digital return currents.
Recommandé
Battery-Powered Analog Monitoring
The MCP6071-E/SN supports battery-powered analog monitoring because it operates from 1.8 V to 6 V and has a typical supply current of 110 µA. Rail-to-rail input and output operation improves usable range in compact systems, and the low ±150 µV maximum offset is beneficial when monitoring slow signals with a controller's ADC. Evaluate the complete system's input bias current, noise, sleep-state behavior, and reference accuracy; the amplifier specification alone does not determine overall measurement resolution.
Recommandé
Threshold and Comparator Circuit
The MCP6071-E/SN can create a threshold detector when the input signal is compared with a reference through the amplifier's inverting and non-inverting inputs. Its ±150 µV maximum input offset voltage helps limit threshold error, and rail-to-rail output operation provides useful logic-level swing in low-voltage systems. Keep the feedback arrangement consistent with the intended linear or comparator-like behavior, account for the 1.2 MHz typical bandwidth, and ensure the output remains within its rated common-mode and load limits.
Recommandé
Données de référence d'ingénierie pour MCP6071-E/SN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | 8-pin SOIC |
| Brand | Microchip Technology |
| Number of Circuits | 1 circuit |
| Supply Voltage Range | 1.8 V to 6 V |
| Typical Gain-Bandwidth Product | 1.2 MHz |
| Maximum Input Offset Voltage | ±150 µV |
| Typical Supply Current | 110 µA |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| Automotive Qualification | AEC-Q100 |
Notes de conception
Keep the op-amp input and feedback components close to the MCP6071-E/SN pins, and route sensitive signals away from switching-regulator outputs and high-current return paths. For transimpedance or precision gain stages, minimize parasitic capacitance at the summing node because it can reduce stability and alter the effective bandwidth. Place supply decoupling near the device and provide a low-impedance ground path.
Design the circuit across the full 1.8 V to 6 V operating range, including startup, load, and output-swing conditions. Rail-to-rail operation improves usable signal range but does not eliminate saturation limits caused by load current or output voltage. Confirm that the selected feedback network maintains a valid linear operating point and that the supply remains above the device's minimum operating voltage during power sequencing.
Do not assume that unity-gain stability permits every load condition. Check capacitive-load stability using the manufacturer guidance, keep the feedback network compact, and verify that the closed-loop gain is appropriate for the 1.2 MHz typical gain-bandwidth product. Also avoid treating the ±150 µV offset specification as a complete error budget; include bias current, noise, resistor tolerance, reference accuracy, and ADC error where applicable.
Informations de conformité
The distributor product listing identifies MCP6071-E/SN as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.