NXP Semiconductors

MKL34Z64VLL4 - 48MHz Cortex-M0+ 64KB MCU | NXP

MPN: MKL34Z64VLL4 ✓ Hoạt động
1.8 V, 2.5 V, 3.3 V Vdss 100-pin LQFP Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKL34Z64VLL4 Tóm tắt

The NXP Semiconductors MKL34Z64VLL4 is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, with 64 KB of embedded Flash memory and segment LCD support in a 100-pin LQFP package measuring 14 mm by 14 mm. It is designed for low-power consumer and industrial metering systems that require compact control, display, timing, analog, and communication functions.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The MKL34Z64VLL4 belongs to the Kinetis KL3x family, whose Cortex-M0+ architecture emphasizes efficient control processing and multiple low-power operating modes. The segment LCD controller extends the family's suitability for metering and human-interface equipment without requiring a separate display controller.

Core device characteristics include a 48 MHz Cortex-M0+ processor, 64 KB of Flash memory, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. The 100-LQFP package provides a large pin count for analog inputs, communication interfaces, LCD segment outputs, timers, and general-purpose I/O. Its specified temperature range of -40 °C to +105 °C supports industrial and consumer equipment exposed to extended environmental conditions.

The Kinetis KL3x architecture combines a RISC-style Cortex-M0+ processor with integrated peripherals for control and metering applications. Low-power modes can reduce energy use during idle periods, while the segment LCD interface can directly drive suitable display segments. Exact RAM capacity, GPIO count, analog specifications, and detailed peripheral configurations must be confirmed in the NXP datasheet before final design release.

Typical uses include utility meters, smart metering terminals, industrial counters, temperature controllers, compact sensor interfaces, and low-power measurement equipment. For display-based designs, the integrated segment LCD capability simplifies the connection between the MCU and a compatible LCD while retaining a single-chip control architecture. The 48 MHz processing rate is appropriate for event handling, periodic measurement, signal conditioning control, and communication-stack management.

PCB design should preserve the exact 100-pin LQFP footprint and follow the manufacturer’s decoupling and pin-multiplexing guidance. Place the device's required power and ground connections directly to well-formed planes, keep switching or high-current traces away from sensitive analog inputs, and route LCD and communication signals away from noisy power-conversion stages.

This page consolidates the manufacturer overview, package and memory details, lifecycle information, drop-in family alternatives, application guidance, and engineering comparison points. It also identifies where the complete NXP datasheet and package pin definition must be consulted before schematic capture, PCB release, firmware configuration, or production sourcing.

Bộ thay thế dễ dàng lắp đặt cho MKL34Z64VLL4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MKL34Z64VLH4

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 100-pin LQFP
Same Kinetis KL34 family, 48 MHz Cortex-M0+, and 64 KB Flash; the ordering suffix differs by 0% in the stated core specifications, while the exact package-temperature configuration must be confirmed

📋 Tham chiếu thay thế (không có trong danh mục)

MKL34Z64VLL1

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 100-pin LQFP
Same Kinetis KL34 family, 48 MHz Cortex-M0+, and 64 KB Flash; the ordering suffix differs by 0% in the stated core specifications, with temperature-grade and availability differences requiring confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

MKL34Z64VLL4 Tỷ lệ tối đa & tính chất điện

Processor Core ARM Cortex-M0+
Architecture 32-bit ARM
Maximum CPU Frequency 48 MHz
Embedded Flash Memory 64 KB
Flash Organization 64K x 8 bits
Operating Supply Voltage Options 1.8 V, 2.5 V, 3.3 V
Khoảng nhiệt độ hoạt động -40 °C to +105 °C
Package Type 100-pin LQFP
Package Dimensions 14 mm x 14 mm
Display Controller Segment LCD
Microcontroller Family Kinetis KL3x
Product Type Low-power 32-bit MCU
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MKL34Z64VLL4 14 mm x 14 mm

Cấu hình chân cho MKL34Z64VLL4 (14 mm x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 14 mm x 14 mm cho MKL34Z64VLL4

Không có dữ liệu chân cụ thể sẵn có cho MKL34Z64VLL4.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MKL34Z64VLL4 phù hợp cho 6 Áp dụngs: Utility Metering, Industrial Counter and Timer, Battery-Powered Sensor Interface, Temperature Controller, Compact Data Acquisition Unit, Smart Metering Interface.

🔧

Utility Metering

The MKL34Z64VLL4 fits utility-meter designs that combine measurement acquisition, local display, event handling, and low-power operation. Its 48 MHz Cortex-M0+ core provides processing capacity for filtering sampled signals, managing calibration data, and servicing communication tasks, while the 64 KB of Flash stores firmware and configuration information. The integrated segment LCD controller can operate a suitable meter display directly. The 100-pin LQFP also exposes more I/O than a compact package for sensors, alarm inputs, and communications. Designers should confirm the ADC, timer, and interface requirements in the datasheet and budget the LCD and sensor loads across the 1.8 V, 2.5 V, or 3.3 V supply options.

🏭

Industrial Counter and Timer

The MKL34Z64VLL4 is appropriate for industrial counters that track pulses, enforce timing intervals, and present measurements through a segment display. The 48 MHz processor supports responsive edge handling and multiple periodic tasks, while 64 KB of Flash accommodates application firmware, lookup data, and diagnostics. Its 100-pin LQFP package offers substantial I/O capacity for pulse inputs, control outputs, status indicators, and serial communications. The -40 °C to +105 °C rating supports equipment deployed across extended temperature environments. Before schematic release, verify the required timer channels, interrupt behavior, and low-power wake conditions so the counter meets its accuracy and standby-current targets.

🧩

Battery-Powered Sensor Interface

The MKL34Z64VLL4 can serve as the control hub in a battery-powered sensor node because its Kinetis KL3x platform is designed around multiple low-power modes. A 48 MHz Cortex-M0+ core can process sensor readings and apply local filtering or thresholds before data is stored or transmitted, and the 64 KB of Flash supports a dedicated embedded application. The 1.8 V, 2.5 V, and 3.3 V operating options align with many low-energy sensor architectures. A 100-pin LQFP provides more peripheral connectivity than a small MCU package. Designers should compare run and sleep current, analog accuracy, and wake-up time in the datasheet, then size the battery using the actual load duty cycle.

🌡️

Temperature Controller

The MKL34Z64VLL4 is suitable for a compact temperature-control panel that receives sensor inputs, evaluates thresholds, drives an output, and displays the set point or measured value. The 48 MHz Cortex-M0+ core handles periodic conversions and control updates, while the segment LCD controller supports a clear local readout without an additional display-control device. The 100-pin LQFP provides room for analog sensor wiring, relay or heater-control signals, buttons, and communication pins. Its -40 °C to +105 °C operating range is useful in industrial environments. Confirm the ADC performance, timer resolution, and output-control topology in the NXP datasheet, and apply isolation or protection appropriate to the load being switched.

📊

Compact Data Acquisition Unit

The MKL34Z64VLL4 can act as the acquisition and control processor in a compact industrial data logger. Its 48 MHz Cortex-M0+ core handles sampling schedules, buffering, and interpretation of sensor data, while 64 KB of Flash provides space for firmware and calibration tables. The 100-pin LQFP package gives the design access to multiple analog and digital connections, and optional serial communications can link the logger to a host. The processor operates from low supply voltages compatible with embedded systems. Firmware should use DMA where supported, confirm peripheral limits from the datasheet, and partition Flash carefully if the application, bootloader, and calibration data require separate regions.

📱

Smart Metering Interface

The MKL34Z64VLL4 fits smart-metering interfaces that need reliable local control, a segment display, and communication connectivity. Its 48 MHz Cortex-M0+ core can manage protocol tasks while retaining deterministic handling of measurement and alarm events, and the 64 KB of Flash is suitable for embedded firmware and configuration data. The segment LCD controller reduces the external component count for common meter displays. With 100 LQFP pins, the board can allocate resources to sensor interfaces, buttons, communications, and control outputs. The selected supply voltage should match the meter architecture, and the complete peripheral list must be reviewed before assigning pins. A lifecycle review is advisable for long-duration deployments.

What is the MKL34Z64VLL4?
The MKL34Z64VLL4 is a 32-bit ARM Cortex-M0+ microcontroller from NXP Semiconductors, operating at up to 48 MHz with 64 KB of embedded Flash. According to the NXP product information, it belongs to the Kinetis KL3x family and is available in a 100-pin LQFP package measuring 14 mm by 14 mm. Its segment LCD controller and low-power design make it particularly suitable for compact metering and control products.
What are the key specifications of MKL34Z64VLL4?
The MKL34Z64VLL4 combines a 32-bit ARM Cortex-M0+ core, a maximum CPU frequency of 48 MHz, 64 KB of Flash memory, and segment LCD support. The NXP product information identifies a 100-pin LQFP package with 14 mm by 14 mm dimensions and operating-voltage options of 1.8 V, 2.5 V, and 3.3 V. The device is specified from -40 °C through +105 °C for industrial and consumer metering equipment.
Where can I download the MKL34Z64VLL4 datasheet PDF?
The MKL34Z64VLL4 datasheet and supporting documentation can be accessed through the official NXP product page at https://www.nxp.com/part/MKL34Z64VLL4. The NXP overview includes the active status and links to the technical data sheet. Use the manufacturer's pin-description table and package drawings during schematic design because the 100-pin LQFP includes numerous multiplexed analog, communication, LCD, and general-purpose functions.
Where can I find the MKL34Z64VLL4 pinout?
The authoritative MKL34Z64VLL4 pinout is shown in the NXP datasheet's package pin-description table and is also discussed in NXP's pinout confirmation resources. The component uses a 100-pin LQFP outline, so each physical pin can have several alternate functions depending on the enabled peripherals. Use the datasheet table to confirm reset, power, ground, analog, LCD, communication, debug, and GPIO assignments for the specific board configuration.
What is the operating voltage range of MKL34Z64VLL4?
The MKL34Z64VLL4 supports nominal operating supply levels of 1.8 V, 2.5 V, and 3.3 V. According to the NXP product information, these voltage options place the device in the low-voltage class commonly used by portable metering, sensor, and embedded-control products. Consult the datasheet's electrical-characteristics table for the exact operating ranges, DC current limits, internal regulator behavior, and power consumption at each voltage.
Is MKL34Z64VLL4 suitable for industrial metering applications?
The MKL34Z64VLL4 is suitable for industrial metering applications that need a 48 MHz Cortex-M0+ processor, 64 KB of Flash, and direct segment LCD support. Its -40 °C to +105 °C operating range and multiple supply-voltage options support robust low-voltage design. Exact analog accuracy, timer resolution, communication coverage, and low-power current should be checked against the product's measurement requirements before qualification.
What can replace the MKL34Z64VLL4?
The closest drop-in candidates are MKL34Z64VLH4 and MKL34Z64VLL1 from the same NXP Kinetis KL34 family, subject to package, temperature-grade, and ordering-code verification. The MKL34Z64VLL4 uses a 100-pin LQFP package, so a replacement must preserve that footprint and its multiplexing requirements. Firmware, peripheral configuration, qualification status, and supply-temperature differences must still be reviewed before production release.
Is MKL34Z64VLL4 the same as MKL34Z64VLH4?
The MKL34Z64VLL4 and MKL34Z64VLH4 are closely related Kinetis KL34 devices, but the ordering suffixes can encode different package, temperature, or shipping configurations. Both must be checked for an identical 100-pin LQFP footprint before they are treated as drop-in alternatives. The NXP product page and ordering-information tables should determine the exact configuration of each suffix, including its grade and reel or tray presentation.
MKL34Z64VLL4 vs MKL34Z64VLH4: which is better for a metering design?
Choose the MKL34Z64VLL4 when the board design specifically requires its confirmed package, temperature range, and ordering configuration. Choose MKL34Z64VLH4 only after verifying that its 100-pin LQFP pin definitions match the PCB and that its electrical, temperature, qualification, and lifecycle characteristics satisfy the meter requirements. Both are based on the 48 MHz, 64 KB Flash Kinetis KL34 platform, so package and grade verification are the decisive steps.
When should I choose MKL34Z64VLL4 over another Kinetis KL34 MCU?
Choose MKL34Z64VLL4 when the design requires a confirmed 48 MHz Cortex-M0+ MCU with 64 KB of Flash, segment LCD control, and a 100-pin LQFP footprint. Prefer a related device only when it offers a needed benefit such as a different supported temperature grade, packaging choice, or verified availability without changing the board. The 100-pin package is particularly useful when analog, LCD, communications, and control functions require more external connections than smaller MCU packages provide.
Is MKL34Z64VLL4 suitable for a segment LCD display?
The MKL34Z64VLL4 includes a segment LCD controller, making it appropriate for meters and compact interfaces that use a segment display rather than a full graphical LCD. According to the NXP product information, the segment LCD capability is a defining feature of the Kinetis KL3x family for metering applications. The display must be electrically compatible with the MCU's segment and common-drive outputs, and operating-current limits should be checked in the datasheet.
What tools support the MKL34Z64VLL4?
The MKL34Z64VLL4 is supported by the MKL34Z4 CMSIS device family package for Arm Keil development, as identified by the Arm Keil device listing. NXP's product resources also provide the device data sheet and product information needed to configure the MCU. Firmware projects should use the matching MKL34Z4 pack, startup files, linker configuration, pin-muxing definitions, and peripheral drivers corresponding to the selected board and package.
Where can I buy MKL34Z64VLL4 online?
Use the Request a Quote form on this page to request MKL34Z64VLL4 availability, current commercial terms, and lead time. The manufacturer lists the exact MPN as active, while authorized inventory can change by region and order quantity. Provide the required package form, production quantity, and target date with the request so the sourcing team can confirm the correct 100-LQFP ordering configuration.
What is the price of MKL34Z64VLL4?
The current commercial price for the MKL34Z64VLL4 should be obtained through the Request a Quote form on this page because market pricing and quantity terms change. Submit the required quantity, tray or reel preference, and shipment destination for a current quotation. The device is listed by NXP as active, allowing the sourcing team to confirm product availability and applicable supply conditions.
Is MKL34Z64VLL4 in stock and what is its lead time?
Current MKL34Z64VLL4 stock and lead time should be confirmed through the Request a Quote form on this page. NXP lists the part as active, but exact inventory, scheduled delivery, and minimum order quantity can vary with package form and order volume. Include your required quantity and production schedule when requesting a quotation so scheduling information reflects the intended build.

Dữ liệu tham khảo kỹ thuật cho MKL34Z64VLL4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MKL34Z64VLL4 when the design requires a 48 MHz Cortex-M0+ controller with 64 KB of Flash, segment LCD support, low-voltage operation, and a confirmed 100-pin LQFP package. It is well matched to utility meters, industrial counters, sensor interfaces, and compact controllers where many external connections are needed. Consider MKL34Z64VLH4 when its exact ordering configuration offers a required package, temperature, qualification, or supply advantage without changing the PCB. Consider MKL34Z64VLL1 when its documented grade and lifecycle conditions better fit the production environment. Neither related device should be released as a substitute until its pin table, electrical limits, temperature range, and device configuration are checked against the target. The larger LQFP footprint provides more I/O but requires careful decoupling, routing, and thermal-aware layout.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MKL34Z64VLH4 MKL34Z64VLL1
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 100-pin LQFP 100-pin LQFP 100-pin LQFP
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB
Segment LCD Controller Supported Supported Supported
Architecture 32-bit ARM 32-bit ARM 32-bit ARM
Microcontroller Family Kinetis KL3x Kinetis KL3x Kinetis KL3x

Bảo phân biệt quan trọng

  • Large LQFP footprint supports demanding metering interfaces (vsMKL34Z64VLH4)
  • Segment LCD integration simplifies meter display designs (vsMKL34Z64VLL1)
  • 48 MHz Cortex-M0+ performance with 64 KB Flash (vsMKL34Z64VLH4)

Ghi chú thiết kế

Create the PCB footprint from the NXP 100-pin LQFP drawing rather than relying only on the generic package name. Confirm pad length, width, pitch, pin numbering, and courtyard clearance against the ordering configuration. Place all required decoupling capacitors close to their associated VDD and VSS pins, provide a low-impedance ground plane, and route sensitive analog inputs away from LCD drive, switching nodes, and high-current outputs.

Plan the 100-pin assignment around the device's multiplexing rules instead of treating every pin as a dedicated GPIO. Reserve the required debug, reset, clock, power, and ground connections first, then assign communications, segment LCD outputs, analog channels, timers, and control signals. Before release, compare the final pin table with the NXP package drawing and verify that every alternate function has the required pull, voltage tolerance, and peripheral configuration.

Design the supply rail for the selected 1.8 V, 2.5 V, or 3.3 V operating option and validate startup, shutdown, and brownout behavior across the full temperature range. Include local high-frequency bypass capacitance and maintain short, wide supply paths to minimize voltage drops. For battery-powered meters, calculate average consumption from measured run and sleep currents, the LCD duty cycle, and sensor duty cycle rather than using only the active current.

Do not assume that a related KL34 suffix is automatically interchangeable. Confirm the physical package, temperature grade, pin multiplexing, firmware device identifier, and supported peripherals before using an alternative. The segment LCD outputs and analog channels may share pins, so enabling one function can change the availability of another. Use the NXP device configuration documentation and CMSIS MKL34Z4 pack to avoid mismatched startup and pin-mux settings.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The NXP product page identifies the MKL34Z64VLL4 as active, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified.

Tìm kiếm liên quan

MKL34Z64VLL4 datasheet MKL34Z64VLL4 datasheet pdf MKL34Z64VLL4 pinout MKL34Z64VLL4 specifications NXP MKL34Z64VLL4 MKL34Z64VLL4 48MHz 64KB MKL34Z64VLL4 LQFP-100 MKL34Z64VLL4 metering application MKL34Z64VLL4 equivalent MKL34Z64VLL4 replacement MKL34Z64VLL4 vs MKL34Z64VLH4 MKL34Z64VLL4 price MKL34Z64VLL4 stock MKL34Z64VLL4 CMSIS pack

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors MKL34Z64VLL4 MKL34Z64VLH4 MKL34Z64VLL1 Kinetis KL3x Kinetis KL34 ARM Cortex-M0+ 32-bit microcontroller microcontroller embedded processor semiconductor 64 KB Flash 48 MHz segment LCD controller 100-pin LQFP LQFP package family surface mount 1.8 V 2.5 V 3.3 V utility metering industrial counter CMSIS MKL34Z4 device family pack Arm Keil low-power mode
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ