MKL34Z64VLL4 - 48MHz Cortex-M0+ 64KB MCU | NXP
부품 번호: MKL34Z64VLL4 ✓ 활성MKL34Z64VLL4 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The MKL34Z64VLL4 belongs to the Kinetis KL3x family, whose Cortex-M0+ architecture emphasizes efficient control processing and multiple low-power operating modes. The segment LCD controller extends the family's suitability for metering and human-interface equipment without requiring a separate display controller.
Core device characteristics include a 48 MHz Cortex-M0+ processor, 64 KB of Flash memory, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. The 100-LQFP package provides a large pin count for analog inputs, communication interfaces, LCD segment outputs, timers, and general-purpose I/O. Its specified temperature range of -40 °C to +105 °C supports industrial and consumer equipment exposed to extended environmental conditions.
The Kinetis KL3x architecture combines a RISC-style Cortex-M0+ processor with integrated peripherals for control and metering applications. Low-power modes can reduce energy use during idle periods, while the segment LCD interface can directly drive suitable display segments. Exact RAM capacity, GPIO count, analog specifications, and detailed peripheral configurations must be confirmed in the NXP datasheet before final design release.
Typical uses include utility meters, smart metering terminals, industrial counters, temperature controllers, compact sensor interfaces, and low-power measurement equipment. For display-based designs, the integrated segment LCD capability simplifies the connection between the MCU and a compatible LCD while retaining a single-chip control architecture. The 48 MHz processing rate is appropriate for event handling, periodic measurement, signal conditioning control, and communication-stack management.
PCB design should preserve the exact 100-pin LQFP footprint and follow the manufacturer’s decoupling and pin-multiplexing guidance. Place the device's required power and ground connections directly to well-formed planes, keep switching or high-current traces away from sensitive analog inputs, and route LCD and communication signals away from noisy power-conversion stages.
This page consolidates the manufacturer overview, package and memory details, lifecycle information, drop-in family alternatives, application guidance, and engineering comparison points. It also identifies where the complete NXP datasheet and package pin definition must be consulted before schematic capture, PCB release, firmware configuration, or production sourcing.
드롭인 대체품: MKL34Z64VLL4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MKL34Z64VLH4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL34Z64VLL1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL34Z64VLL4 최대 정격 & 전기적 특성
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit ARM |
| Maximum CPU Frequency | 48 MHz |
| Embedded Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, 3.3 V |
| 동작 온도 범위 | -40 °C to +105 °C |
| Package Type | 100-pin LQFP |
| Package Dimensions | 14 mm x 14 mm |
| Display Controller | Segment LCD |
| Microcontroller Family | Kinetis KL3x |
| Product Type | Low-power 32-bit MCU |
| 실장 유형 | Surface mount |
MKL34Z64VLL4 14 mm x 14 mm 핀 구성 가이드
MKL34Z64VLL4(14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MKL34Z64VLL4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MKL34Z64VLL4 적합 용도: 6 애플리케이션s: Utility Metering, Industrial Counter and Timer, Battery-Powered Sensor Interface, Temperature Controller, Compact Data Acquisition Unit, Smart Metering Interface.
Utility Metering
The MKL34Z64VLL4 fits utility-meter designs that combine measurement acquisition, local display, event handling, and low-power operation. Its 48 MHz Cortex-M0+ core provides processing capacity for filtering sampled signals, managing calibration data, and servicing communication tasks, while the 64 KB of Flash stores firmware and configuration information. The integrated segment LCD controller can operate a suitable meter display directly. The 100-pin LQFP also exposes more I/O than a compact package for sensors, alarm inputs, and communications. Designers should confirm the ADC, timer, and interface requirements in the datasheet and budget the LCD and sensor loads across the 1.8 V, 2.5 V, or 3.3 V supply options.
Industrial Counter and Timer
The MKL34Z64VLL4 is appropriate for industrial counters that track pulses, enforce timing intervals, and present measurements through a segment display. The 48 MHz processor supports responsive edge handling and multiple periodic tasks, while 64 KB of Flash accommodates application firmware, lookup data, and diagnostics. Its 100-pin LQFP package offers substantial I/O capacity for pulse inputs, control outputs, status indicators, and serial communications. The -40 °C to +105 °C rating supports equipment deployed across extended temperature environments. Before schematic release, verify the required timer channels, interrupt behavior, and low-power wake conditions so the counter meets its accuracy and standby-current targets.
Battery-Powered Sensor Interface
The MKL34Z64VLL4 can serve as the control hub in a battery-powered sensor node because its Kinetis KL3x platform is designed around multiple low-power modes. A 48 MHz Cortex-M0+ core can process sensor readings and apply local filtering or thresholds before data is stored or transmitted, and the 64 KB of Flash supports a dedicated embedded application. The 1.8 V, 2.5 V, and 3.3 V operating options align with many low-energy sensor architectures. A 100-pin LQFP provides more peripheral connectivity than a small MCU package. Designers should compare run and sleep current, analog accuracy, and wake-up time in the datasheet, then size the battery using the actual load duty cycle.
Temperature Controller
The MKL34Z64VLL4 is suitable for a compact temperature-control panel that receives sensor inputs, evaluates thresholds, drives an output, and displays the set point or measured value. The 48 MHz Cortex-M0+ core handles periodic conversions and control updates, while the segment LCD controller supports a clear local readout without an additional display-control device. The 100-pin LQFP provides room for analog sensor wiring, relay or heater-control signals, buttons, and communication pins. Its -40 °C to +105 °C operating range is useful in industrial environments. Confirm the ADC performance, timer resolution, and output-control topology in the NXP datasheet, and apply isolation or protection appropriate to the load being switched.
Compact Data Acquisition Unit
The MKL34Z64VLL4 can act as the acquisition and control processor in a compact industrial data logger. Its 48 MHz Cortex-M0+ core handles sampling schedules, buffering, and interpretation of sensor data, while 64 KB of Flash provides space for firmware and calibration tables. The 100-pin LQFP package gives the design access to multiple analog and digital connections, and optional serial communications can link the logger to a host. The processor operates from low supply voltages compatible with embedded systems. Firmware should use DMA where supported, confirm peripheral limits from the datasheet, and partition Flash carefully if the application, bootloader, and calibration data require separate regions.
Smart Metering Interface
The MKL34Z64VLL4 fits smart-metering interfaces that need reliable local control, a segment display, and communication connectivity. Its 48 MHz Cortex-M0+ core can manage protocol tasks while retaining deterministic handling of measurement and alarm events, and the 64 KB of Flash is suitable for embedded firmware and configuration data. The segment LCD controller reduces the external component count for common meter displays. With 100 LQFP pins, the board can allocate resources to sensor interfaces, buttons, communications, and control outputs. The selected supply voltage should match the meter architecture, and the complete peripheral list must be reviewed before assigning pins. A lifecycle review is advisable for long-duration deployments.
엔지니어링 참조 데이터: MKL34Z64VLL4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MKL34Z64VLH4 | MKL34Z64VLL1 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| CPU Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Segment LCD Controller | Supported | Supported | Supported |
| Architecture | 32-bit ARM | 32-bit ARM | 32-bit ARM |
| Microcontroller Family | Kinetis KL3x | Kinetis KL3x | Kinetis KL3x |
주요 차별점
- Large LQFP footprint supports demanding metering interfaces (vs MKL34Z64VLH4)
- Segment LCD integration simplifies meter display designs (vs MKL34Z64VLL1)
- 48 MHz Cortex-M0+ performance with 64 KB Flash (vs MKL34Z64VLH4)
설계 노트
Create the PCB footprint from the NXP 100-pin LQFP drawing rather than relying only on the generic package name. Confirm pad length, width, pitch, pin numbering, and courtyard clearance against the ordering configuration. Place all required decoupling capacitors close to their associated VDD and VSS pins, provide a low-impedance ground plane, and route sensitive analog inputs away from LCD drive, switching nodes, and high-current outputs.
Plan the 100-pin assignment around the device's multiplexing rules instead of treating every pin as a dedicated GPIO. Reserve the required debug, reset, clock, power, and ground connections first, then assign communications, segment LCD outputs, analog channels, timers, and control signals. Before release, compare the final pin table with the NXP package drawing and verify that every alternate function has the required pull, voltage tolerance, and peripheral configuration.
Design the supply rail for the selected 1.8 V, 2.5 V, or 3.3 V operating option and validate startup, shutdown, and brownout behavior across the full temperature range. Include local high-frequency bypass capacitance and maintain short, wide supply paths to minimize voltage drops. For battery-powered meters, calculate average consumption from measured run and sleep currents, the LCD duty cycle, and sensor duty cycle rather than using only the active current.
Do not assume that a related KL34 suffix is automatically interchangeable. Confirm the physical package, temperature grade, pin multiplexing, firmware device identifier, and supported peripherals before using an alternative. The segment LCD outputs and analog channels may share pins, so enabling one function can change the availability of another. Use the NXP device configuration documentation and CMSIS MKL34Z4 pack to avoid mismatched startup and pin-mux settings.
규정 준수 정보
The NXP product page identifies the MKL34Z64VLL4 as active, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified.