MMC2113CFCPV33 - M210 MCore 32-Bit MCU 33MHz 128KB Flash | NXP
MPN: MMC2113CFCPV33 ✗ Cuối đờiMMC2113CFCPV33 Tóm tắt
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH/ROM), working memory (RAM), and peripheral interfaces (timers, communication controllers, ADC, GPIO) into one package. The MCore M210 architecture is a streamlined 32-bit RISC ISA optimized for embedded control, with the MMC2113 occupying the mid-tier of the family - higher integration than 8/16-bit microcontrollers, lower cost than application processors. It sits within the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC.
Key features of the MMC2113CFCPV33 include the M210 32-bit MCore core, 33 MHz maximum CPU clock, 128 KB on-chip FLASH for code storage, a 144-pin LQFP industrial-grade package, low-power operating modes for battery-backed applications, multiple timers, serial communication interfaces, GPIO, and an integrated interrupt controller. The M210 core executes most instructions in a single cycle, providing deterministic interrupt latency suited to real-time motor control, human-machine interface, and serial-communication gateway designs.
Typical applications include industrial automation controllers, building-automation nodes, point-of-sale terminals, HVAC control boards, simple HMI panels, and serial-bridge gateways. The 128 KB FLASH and 33 MHz core are sufficient for protocols such as Modbus, CANopen, and Profibus slave stacks, while the LQFP-144 footprint supports generous PCB routing for power-isolation and mixed-signal layouts.
When designing with this device, ensure the supply rail is decoupled with at least a 100 nF ceramic capacitor adjacent to each VDD/VSS pair, and observe the FLASH programming voltage and timing requirements detailed in the manufacturer datasheet. The 144-pin LQFP requires careful PCB layout to avoid trace congestion around the periphery, and the JTAG/BDM debug port pins must be reserved for in-circuit programming.
This page synthesizes distributor stock and pricing, parametric alternatives, and design considerations not consolidated on the manufacturer datasheet, providing an independent reference for engineers evaluating the MMC2113CFCPV33 for new designs or legacy-system maintenance.
Bộ thay thế dễ dàng lắp đặt cho MMC2113CFCPV33 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MMC2113CFCPV33 (cùng hình factor và footprint) — khác nhau ở Core Architecture, Core Processor, Package, Supply Voltage, Program Memory Size.
MMC2114CFCAG33
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MMC2112CFCPV33
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MMC2113CFCAG33
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCF51AC256ACFUE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MK60DN512VLQ10
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MMC2113CFCPV33 Tỷ lệ tối đa & tính chất điện
| Manufacturer | NXP USA Inc. (formerly Freescale Semiconductor) |
| Series | M210 MCore |
| Core Processor | M210 MCore 32-Bit |
| Core Size | 16/32-Bit |
| Maximum CPU Clock | 33 MHz |
| Program Memory Size | 128 KB (128K x 8) FLASH |
| Hộp | 144-LQFP (20 mm x 20 mm, LFQFP) |
| Package Code | LFQFP |
| Package Shape | SQUARE |
| Terminal Form | GULL WING |
| Number of Terminals | 144 |
| Kiểu lắp đặt | Surface Mount |
| Temperature Grade | INDUSTRIAL |
Hướng dẫn cấu hình chân MMC2113CFCPV33 square
Cấu hình chân cho MMC2113CFCPV33 (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MMC2113CFCPV33.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MMC2113CFCPV33 phù hợp cho 6 Áp dụngs: Industrial Automation Controllers, Building Automation Nodes, Point-of-Sale Terminals, Human-Machine Interface (HMI) Panels, Serial-Communication Gateways, Legacy Equipment Maintenance & Field Replacement.
Industrial Automation Controllers
The MMC2113CFCPV33's M210 MCore 32-bit architecture at 33 MHz with 128 KB FLASH and 144-LQFP GPIO headroom makes it well suited to industrial PLC-style controllers driving relays, sensors, and actuators on a 24V factory floor. The deterministic single-cycle MCore instruction timing delivers predictable interrupt latency for closed-loop control of temperature, pressure, and flow. Placed on a controller board with opto-isolated I/O and RS-485 transceivers, it executes Modbus RTU slave firmware comfortably within its 128 KB FLASH budget. Unlike newer ARM Cortex-M parts, the MCore legacy code base allows easy maintenance of installed equipment.
Được đề xuất
Building Automation Nodes
HVAC and access-control nodes benefit from the MMC2113CFCPV33's industrial temperature grade, low-power MCore modes, and 144-LQFP pin count that exposes multiple UART/SPI/I2C interfaces for sensors and downstream actuators. The 33 MHz MCore is sufficient for BACnet MS-TP or Modbus slave protocol stacks, with the 128 KB FLASH holding both the application and the protocol library. Its surface-mount LQFP package simplifies automated assembly of high-volume building-automation boards, while the legacy architecture lets OEMs continue shipping field-proven firmware without re-validation.
Được đề xuất
Point-of-Sale Terminals
Point-of-sale (POS) terminals rely on deterministic real-time performance for display refresh, keypad scanning, magnetic-stripe reader polling, and secure transaction buffering - all well matched to the MMC2113CFCPV33's 33 MHz MCore and 144 GPIO. The 128 KB FLASH accommodates the POS firmware, font tables, and crypto routines for PIN-pad handling. Designers route the 144-LQFP pins to a character LCD, matrix keypad, smart-card interface, and RS-232/RS-485 port to the back-office terminal. The legacy NXP architecture and long-term NXP/Freescale firmware ecosystem simplify regulatory and PCI compliance audits for installed fleets.
Được đề xuất
Human-Machine Interface (HMI) Panels
Small HMI panels with character LCDs and keypads pair naturally with the MMC2113CFCPV33, where the 33 MHz M210 MCore drives the display refresh loop, scans the keypad matrix, and manages serial upload/download of configuration screens. The 144-pin LQFP exposes enough GPIO to drive an LCD module directly, plus serial links to a master PLC. Its single-cycle MCore execution keeps menu-response latency under one frame, and the 128 KB FLASH holds bitmap fonts and multi-language strings. Field upgrades are feasible because the FLASH can be re-programmed in-circuit via the debug interface documented in the manufacturer datasheet.
Được đề xuất
Serial-Communication Gateways
Industrial gateways that bridge RS-232, RS-485, and fieldbus protocols are an ideal fit for the MMC2113CFCPV33. The 144-LQFP pin count accommodates multiple UART channels simultaneously, while the M210 MCore's deterministic interrupt handling ensures that no inbound serial byte is dropped under heavy protocol traffic. With 128 KB FLASH, the part stores Modbus, DF1, and ASCII protocol conversion tables in a single image. Compared to a discrete UART-only design, integrating the MCU reduces BOM cost and PCB area for the gateway enclosure.
Được đề xuất
Legacy Equipment Maintenance & Field Replacement
Because the MMC2113CFCPV33 is the long-life production part for legacy M210 MCore designs, its principal ongoing use is in maintenance, repair, and overhaul of installed industrial equipment. Distributors continue to stock the 144-LQFP variant for service depots that need a verified pin-compatible replacement for failed boards. The industrial temperature grade and identical pinout to other 144-LQFP M210 variants simplify spare-parts management for OEMs with 10-15 year product lifecycles. Engineers should confirm NRND status and lock in lifetime-buy quantities for service continuity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MMC2113CFCPV33 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MMC2114CFCAG33 | MMC2112CFCPV33 | MMC2113CFCAG33 | MCF51AC256ACFUE | MK60DN512VLQ10 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (LFQFP, 20x20 mm) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Core Architecture | M210 MCore 32-bit | M210 MCore 32-bit | M210 MCore 32-bit | M210 MCore 32-bit | ColdFire V1 32-bit | ARM Cortex-M4 |
| Maximum CPU Clock | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 50 MHz | 100 MHz |
| On-chip Flash | 128 KB | Higher density (MMC2114 series) | Lower density (MMC2112 series) | 128 KB | 256 KB | 512 KB |
| Lifecycle Status | NRND | NRND (legacy MCore) | NRND (legacy MCore) | NRND | Active (ColdFire) | Active (Kinetis) |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
Bảo phân biệt quan trọng
- Pin-compatible drop-in replacement within the MMC2113 family with the same LQFP-144 footprint (vsMMC2112CFCPV33)
- MCore legacy code reuse versus ColdFire migration (vsMCF51AC256ACFUE)
- Lower-frequency deterministic control vs high-performance ARM Cortex-M4 (vsMK60DN512VLQ10)
Ghi chú thiết kế
The MMC2113CFCPV33 requires a stable 3.3 V supply rail (verify exact VDD min/max in the manufacturer datasheet). Place a 100 nF ceramic decoupling capacitor adjacent to each VDD/VSS pin pair, and add a bulk 10 uF tantalum or ceramic capacitor near the package supply entry. For battery-backed industrial nodes, add a power supervisory IC to generate a clean reset and to switch between primary and backup rails. The M210 MCore supports low-power STOP and WAIT modes - use these to drop quiescent current between sensor polling events.
The 144-LQFP at 0.5 mm pitch (verify exact pitch in the datasheet) requires careful escape routing - use 0.2 mm/8 mil traces with 0.2 mm spacing under the package and break out on inner layers if needed. Place the JTAG/BDM debug header on the board edge for in-circuit programming access. Keep analog references, crystal traces, and reset circuitry within 10 mm of the MCU to avoid noise pickup. Maintain a continuous ground plane beneath the LQFP to reduce EMI and improve thermal dissipation.
Do not assume the MMC2113CFCPV33 is RoHS compliant without verifying the specific lot/date code - some legacy M210 MCore parts predate RoHS. The '33' in the MPN indicates the 33 MHz speed grade; lower-speed grades use different suffixes. Confirm the JTAG/BDM debug interface pinout against the datasheet before laying out the programming header. Because the M210 MCore is legacy, ensure your compiler/toolchain still supports the MCore ISA before committing to a new firmware project.
Thông tin tuân thủ
RoHS, REACH, lead-free, and halogen-free status must be verified per lot with the supplying distributor. The M210 MCore family is a legacy line; some date codes predate RoHS. AEC-Q100 is not applicable (not an automotive-qualified part).
