MPC8545EVTATGC - PowerPC e500 MPU 1.2GHz 783-FCPBGA | NXP
MPN: MPC8545EVTATGC ✗ Cuối đờiMPC8545EVTATGC Tóm tắt
What is an MPU? A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system on a single chip. Within the broader taxonomy, an MPU sits above a microcontroller (MCU) in integration hierarchy and below a system-on-chip (SoC). The MPC85xx family falls into the embedded MPU category - higher performance than typical MCUs but with more user-configurable peripherals than full application processors. The e500 core is a PowerPC-compliant 32-bit superscalar implementation optimized for networking and industrial workloads.
Key features include a 32-bit PowerPC e500 core, 1.2 GHz maximum operating frequency, integrated SPE and SEC co-processors for signal processing and cryptographic acceleration, and DDR/DDR2/SDRAM memory controller support. The 783-FCPBGA package uses flip-chip technology for high-frequency signal integrity and improved thermal performance over wire-bond BGA packages.
From an architectural perspective, the MPC8545E combines the e500 core with three levels of cache hierarchy and a high-bandwidth system bus that connects to on-chip peripherals. The integrated security engine handles common cryptographic algorithms (AES, DES, SHA, RSA) at line rate, offloading the main core for accelerated packet processing in networking equipment.
Typical applications include enterprise routers, switches, network security appliances, industrial control systems, and embedded computing platforms where deterministic performance and hardware-accelerated cryptography are required. The high 1.2 GHz clock speed supports wire-speed packet forwarding in mid-range networking infrastructure.
Design consideration: this part is flagged Obsolete per the verified datasheet snippet; design teams should evaluate the lifecycle status and consider last-time-buy inventory planning. Heat dissipation requires careful PCB layout with adequate via arrays under the thermal pad.
This page synthesizes distributor pricing, lifecycle status, and engineering context for engineers evaluating the MPC8545EVTATGC for new designs or legacy board support.
Bộ thay thế dễ dàng lắp đặt cho MPC8545EVTATGC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MPC8545EVTAUJC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8545EVTANGC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8545EVTALGC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8545EVTAQGC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8545EVTARGC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8545EVTATGC Tỷ lệ tối đa & tính chất điện
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Core Width | 32-Bit |
| Maximum Clock Speed | 1.2 GHz |
| Co-Processors/DSP | Signal Processing; SPE, Security; SEC |
| RAM Controllers | DDR, DDR2, SDRAM |
| Graphics Acceleration | No |
| Hộp | 783-FCPBGA (29x29 mm) |
| Series | MPC85xx |
| Part Status | Obsolete |
| Kiểu lắp đặt | Surface Mount |
| Supplier Device Package | 783-FCPBGA (29x29) |
Hướng dẫn cấu hình chân MPC8545EVTATGC 783-fcpbga (29x29)
Cấu hình chân cho MPC8545EVTATGC (783-fcpbga (29x29) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC8545EVTATGC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC8545EVTATGC phù hợp cho 6 Áp dụngs: Enterprise Routers and Switches, Network Security Appliances, Industrial Control Systems, Embedded Computing Platforms, Wireless Base Station Controllers, Storage Area Network Controllers.
Enterprise Routers and Switches
The MPC8545EVTATGC's 1.2 GHz PowerPC e500 core with integrated security engine makes it ideal for mid-range enterprise routers and Layer 2/3 switches. Its hardware-accelerated AES, DES, SHA, and RSA offload IPsec and SSL/TLS processing at line rate. The DDR2 memory controller supports the high-bandwidth packet buffer requirements of gigabit routing. The 783-FCPBGA package provides excellent signal integrity for high-speed SerDes interfaces typical in networking line cards, while the obsolete status means designers should plan end-of-life migration paths.
Được đề xuất
Network Security Appliances
The MPC8545EVTATGC's integrated SEC engine accelerates cryptographic operations at line rate, making it well-suited for VPN gateways, firewalls, and intrusion prevention systems. The 32-bit PowerPC e500 core handles control-plane processing while the security engine handles bulk data encryption/decryption. The 783-FCPBGA package supports the thermal envelope needed for sustained cryptographic workloads. Given the obsolete part status, security appliance OEMs should evaluate the QorIQ LS1024A or similar successors for next-generation products requiring sustained lifecycle support.
Được đề xuất
Industrial Control Systems
The MPC8545EVTATGC's deterministic PowerPC architecture and integrated signal processing engine (SPE) suit it for industrial control applications requiring real-time response. The DDR2 controller supports deterministic memory access for control loops, while the 1.2 GHz clock speed handles multi-axis motion control algorithms. The 783-FCPBGA package's flip-chip construction provides robust thermal performance for industrial temperature ranges. Designers building new industrial platforms should consider the LS1028A or LS1046 for active lifecycle support while leveraging existing MPC8545E firmware investments.
Được đề xuất
Embedded Computing Platforms
The MPC8545EVTATGC's combination of 1.2 GHz performance, hardware security, and signal processing makes it suitable for embedded computing platforms used in defense, aerospace, and transportation applications. The PowerPC e500 architecture provides a well-supported ecosystem including VxWorks, Green Hills INTEGRITY, and Linux distributions. The 783-FCPBGA package supports compact board designs while the obsolete status is less concerning in long-lifecycle defense programs where parts obsolescence is managed through lifetime buys.
Được đề xuất
Wireless Base Station Controllers
The MPC8545EVTATGC's signal processing engine (SPE) accelerates the DSP operations common in wireless base station baseband processing. Combined with the 1.2 GHz clock speed and integrated security engine for ciphering, the part supports 3G and early 4G base station controller cards. The DDR/DDR2 memory interface accommodates the high-bandwidth data flows typical in baseband processing. Migration to newer QorIQ or Layerscape parts is recommended for 5G designs but the MPC8545EVTATGC remains valid for mature LTE platforms.
Được đề xuất
Storage Area Network Controllers
The MPC8545EVTATGC's hardware cryptography and signal processing fit it for Fibre Channel and iSCSI storage controller applications. The DDR2 memory interface supports RAID cache requirements, while the integrated security engine handles encryption-at-rest operations. The 783-FCPBGA package's flip-chip thermal performance is advantageous in densely-populated storage backplanes. New SAN designs should target the QorIQ T-series for better performance and active lifecycle, while the MPC8545EVTATGC serves legacy controller card refresh programs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC8545EVTATGC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC8545EVTAUJC | MPC8545EVTANGC | MPC8545EVTALGC | MPC8545EVTAQGC | MPC8545EVTARGC |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same |
| Core Processor | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Core Count | 1 | 1 | 1 | 1 | 1 | 1 |
| Core Width | 32-Bit | 32-Bit | 32-Bit | 32-Bit | 32-Bit | 32-Bit |
| Co-Processors | SPE + SEC | SPE + SEC | SPE + SEC | SPE + SEC | SPE + SEC | SPE + SEC |
| RAM Controllers | DDR, DDR2, SDRAM | DDR, DDR2, SDRAM | DDR, DDR2, SDRAM | DDR, DDR2, SDRAM | DDR, DDR2, SDRAM | DDR, DDR2, SDRAM |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Single-core PowerPC e500 with integrated SEC engine (vsMPC8533E family)
- 1.2 GHz top speed grade (vsMPC8545EVTAUJC (lower speed grade))
- Combined SPE and SEC co-processors (vsMPC8543 (no SEC engine))
Ghi chú thiết kế
The MPC8545EVTATGC's 783-FCPBGA package requires careful PCB thermal management. Estimated: at 1.2 GHz with full SerDes activity, the part dissipates approximately 8-12 W. A multi-layer PCB with a thermal pad array and stitching vias is mandatory for reliable operation. Reference NXP application note AN3534 for layout recommendations including via placement, pad geometry, and thermal relief pattern.
Layout considerations for the MPC8545EVTATGC: route DDR/DDR2 signals with matched impedance (typically 50 ohms single-ended), use length-matching within the byte lanes per the reference manual, and place bypass capacitors as close as possible to each power pin. The high-speed SerDes signals require impedance-controlled routing and reference planes. Estimated: a 10-layer PCB stack-up with dedicated power and ground planes is recommended.
Common pitfalls when designing with the MPC8545EVTATGC: (1) Failing to configure the hardware reset configuration pins correctly - these define boot source, clock ratios, and SerDes mode at reset. (2) Omitting the I2C bus for memory initialization - the SPD EEPROM read sequence is critical for DDR2 DIMM configuration. (3) Neglecting the PORESET and HRESET sequencing during power-up. Refer to the MPC8545E reference manual chapters on reset and boot configuration.
Signal integrity for the MPC8545EVTATGC requires controlled impedance for all high-speed signals including DDR2, SerDes, and local bus interfaces. Maintain 50 ohm single-ended impedance for DDR2 and 100 ohm differential for SerDes. Use ground stitching vias every 200 mils along high-speed signal traces. Place the part on the top side of the PCB to minimize via stubs on critical signals.
Thông tin tuân thủ
Compliance information not present in verified web data; consult NXP product documentation for RoHS/REACH status of this obsolete part.