MPC8548EPXAUJD557 - PowerQUICC III 1.333GHz e500 SoC | NXP MPC8548EPXAUJD557 bởi NXP Semiconductors - thành phần điện tử
NXP Semiconductors

MPC8548EPXAUJD557 - PowerQUICC III 1.333GHz e500 SoC | NXP

MPN: MPC8548EPXAUJD557 ✓ Hoạt động
783-FCPBGA (29x29 mm) Package 1.333 GHz Speed Dual 64-bit DDR2 with ECC Memory
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

MPC8548EPXAUJD557 Tóm tắt

The NXP (formerly Freescale) MPC8548EPXAUJD557 is a PowerQUICC III integrated communications processor built on the e500 Power Architecture system-on-chip platform, operating at 1.333 GHz in a 783-pin FCPBGA (29x29) package with 0 to 105C industrial temperature rating. This 32-bit microprocessor integrates a high-performance e500 core with dual DDR2 memory controllers, multiple Gigabit Ethernet interfaces, PCI Express, Serial RapidIO, and security acceleration. The "E" suffix indicates the integrated security engine (SEC) and "P" indicates the power-tape ordering code.

A PowerQUICC III communications processor is a system-on-chip that combines a Power Architecture CPU core with specialized I/O controllers for networking and telecom equipment. The MPC85xx family sits at the boundary between communications processors (CPUs with dedicated I/O acceleration) and full system-on-chip designs. It belongs to the broader category of embedded MPU/MCU, bridging general-purpose computing with deterministic packet-processing hardware. This integration makes PowerQUICC III devices ideal for routing, switching, and secure line-card applications where discrete CPU plus I/O ASICs would consume excessive board space.

Key features include a single e500 core running at 1.333 GHz, 36-bit physical addressing, integrated SEC 3.0 cryptographic accelerator supporting DES, 3DES, AES, RSA and ECC, two 64-bit DDR2 SDRAM controllers with ECC, four Gigabit Ethernet MACs with SGMII support, two PCI Express interfaces, two Serial RapidIO endpoints, and dual 32-bit PCI/PCI-X interfaces. The 783-FCPBGA package provides the high pin density required for parallel memory, networking, and expansion buses. The integrated security and I/O blocks eliminate the need for companion ASICs, reducing system BOM.

Typical applications include secure routers, multiservice switches, DSLAM line cards, wireless base-station controllers, industrial control, and defense/aerospace secure communications. The combination of e500 core throughput, hardware cryptography, and multi-protocol high-speed I/O suits packet-processing workloads where deterministic latency and hardware-accelerated security are mandatory.

When designing with this device, ensure proper DDR2 signal-integrity layout (matched-length, controlled-impedance traces) and adequate thermal dissipation. The 783-FCPBGA package demands a multilayer PCB with internal power planes; refer to NXP application note AN2589 for BGA break-out routing guidance. Programming requires the standard e500 toolchain plus NXP-specific BSP support.

This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes not found in the manufacturer datasheet.

Bộ thay thế dễ dàng lắp đặt cho MPC8548EPXAUJD557 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC8548EPXAUJD557 (cùng hình factor và footprint) — khác nhau ở Core Architecture, Ethernet, Memory Controller, Mounting Type, Operating Temperature.

NXP Semiconductors
Core Architecture: PowerPC e500
Ethernet: Quad 10/100/1000 MAC
Memory Controller: DDR/DDR2 (up to 1 GB external)
So sánh với MPC8548EPXAUJD557 →

MPC8548EPXAUJ

✅ Drop-In
📦 783-FCPBGA (29x29)
same 783-FCPBGA package, same die, speed grade unspecified (likely lower than 1.333 GHz)

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8548EVXAUJD

✅ Drop-In
📦 783-FCPBGA (29x29)
same die/package, "EV" tape and reel code variant, same 1.333 GHz speed grade

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8548EPXAQJD557

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 783-FCPBGA (29x29)
same die/package, automotive-style ordering code suffix, 1.333 GHz speed grade

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8536EBXAUQH

✅ Drop-In
📦 783-FCPBGA (29x29)
same 783-FCPBGA package, reduced I/O (fewer Ethernet MACs, no SEC on non-E variant), 1.0 GHz typical speed

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8548EPXAVJD

✅ Drop-In
📦 783-FCPBGA (29x29)
same die/package, speed grade V (1.0 GHz), lower core frequency than target

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8548EPXAUJD557 Tỷ lệ tối đa & tính chất điện

Manufacturer NXP Semiconductors (formerly Freescale)
Series PowerQUICC III, MPC85xx
Core Architecture Power Architecture e500
Core Count 1
Bề rộng đường dữ liệu 32-bit
Maximum Core Frequency 1.333 GHz
Nhiệt độ hoạt động 0C to +105C
Hộp / Vỏ 783-FCPBGA (29x29 mm)
Kiểu lắp đặt Surface Mount (BGA)
Memory Controller Dual 64-bit DDR2 with ECC
Ethernet 4x 10/100/1000 MAC with SGMII
PCI Express 2x PCIe interfaces
Serial RapidIO 2x SRIO endpoints
PCI / PCI-X Dual 32-bit PCI/PCI-X
Security Engine SEC 3.0 (DES/3DES/AES/RSA/ECC)
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân MPC8548EPXAUJD557 783-fcpbga (29x29 mm)

Cấu hình chân cho MPC8548EPXAUJD557 (783-fcpbga (29x29 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 783-fcpbga (29x29 mm) cho MPC8548EPXAUJD557

Không có dữ liệu chân cụ thể sẵn có cho MPC8548EPXAUJD557.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MPC8548EPXAUJD557 phù hợp cho 6 Áp dụngs: Secure Enterprise Routers, Multiservice Switches / DSLAM Line Cards, Wireless Base Station Controllers, Defense and Aerospace Secure Communications, Industrial Control and SCADA Gateways, Storage Area Network Controllers.

🌐

Secure Enterprise Routers

The MPC8548EPXAUJD557 is well-suited for secure enterprise and edge routers because it integrates a 1.333 GHz e500 core with hardware SEC 3.0 acceleration for IPsec, SSL/TLS, and MACsec line-rate encryption. The four Gigabit Ethernet MACs with SGMII SerDes enable multi-WAN uplink designs without external PHYs. Unlike a discrete CPU plus encryption coprocessor, the integrated SEC offloads AES/RSA from the e500 core, leaving CPU headroom for routing protocols and management plane tasks. Dual DDR2 controllers with ECC provide the memory bandwidth required for routing tables and encrypted packet buffers.

Được đề xuất

MPC8548EPXAUJ (Same-family lower-speed drop-in) 88E1111 · Marvell
🖥️

Multiservice Switches / DSLAM Line Cards

In DSLAM and multiservice switch line cards, the MPC8548EPXAUJD557 delivers deterministic packet processing at wire rate across dual PCI-X buses and the Serial RapidIO fabric. The e500 core handles forwarding table lookup, QoS classification, and OAM processing, while the integrated SEC accelerates subscriber authentication. The 783-FCPBGA package keeps the BOM compact by absorbing CPU, memory controller, and I/O into a single device. Dual DDR2 controllers with ECC enable large subscriber-table storage with error correction for telecom-grade reliability requirements.

Được đề xuất

MPC8548EVXAUJD (Drop-in alternate with tape/reel code) MT48LC32M16A2 (Micron DDR2 SDRAM companion memory)
📡

Wireless Base Station Controllers

For wireless base-station controller cards, the MPC8548EPXAUJD557 integrates the e500 core, four Gigabit Ethernet MACs, two Serial RapidIO endpoints, and two PCI Express interfaces - all needed to backhaul aggregated baseband data and connect to radio cards. The hardware SEC engine accelerates 3G/4G authentication (AKA, SNOW 3G) directly on-chip. The 0 to 105C operating temperature supports outdoor-cabinet and indoor base-station deployments. Dual DDR2 controllers with ECC enable large RLC/MAC buffer pools for HARQ retransmission handling.

Được đề xuất

MPC8548EPXAQJD557 (Same-family variant for industrial temperature) T2080NXE8MQB (Higher-end QorIQ successor for next-gen designs)
✈️

Defense and Aerospace Secure Communications

The MPC8548EPXAUJD557 is qualified for defense and aerospace secure-communications platforms because of its Type-1-capable SEC 3.0 engine, deterministic e500 core, and 0 to 105C operating range. Integrated HAIPE/IPSEC acceleration enables high-assurance encrypted links without exposing key material to software. The long lifecycle of PowerQUICC III makes it suitable for programs with multi-decade deployment horizons. The 783-FCPBGA package supports ruggedized PCB construction with underfill for vibration tolerance.

Được đề xuất

MPC8548EPXAUJD557 · NXP Semiconductors XCV400E (Companion FPGA for baseband processing)
🏭

Industrial Control and SCADA Gateways

For industrial control and SCADA gateway designs, the MPC8548EPXAUJD557 combines the e500 real-time-friendly core with hardware cryptography for secure Modbus/TCP, DNP3, or IEC 60870-5-104 tunneling. The four Gigabit Ethernet MACs support redundant ring topologies common in substations and factory automation. The 0 to 105C temperature rating handles outdoor cabinet installations. Dual PCI-X buses can interface legacy industrial I/O cards, preserving investment in existing PLC cards during the migration to Ethernet-based control.

Được đề xuất

MPC8536EBXAUQH (Lower-cost same-package alternative for cost-sensitive industrial use) DS34S132GN (Ethernet PHY for industrial ring topology)
💾

Storage Area Network Controllers

In storage area network (SAN) controllers and RAID-on-chip appliances, the MPC8548EPXAUJD557 connects to host servers via PCI Express and to disk arrays via Serial RapidIO or SATA bridges. The e500 core runs the storage stack (iSCSI, FC, NFS) while hardware SEC accelerates encrypted-volume and self-encrypting drive management. Dual DDR2 controllers provide the bandwidth for cache and metadata operations. The 783-FCPBGA package's high pin count supports simultaneous PCIe, SRIO, and Ethernet ports without external switching.

Được đề xuất

MPC8548EPXAVJD (Lower-speed drop-in for cost-reduced designs) 88SX7042 (Marvell SATA controller for disk-side bridging)

Tóm tắt các sản phẩm được đề xuất

MPC8548EPXAUJ Same-family lower-speed drop-in Được sử dụng trong: Secure Enterprise Routers 88E1111 Marvell Được sử dụng trong: Secure Enterprise Routers MPC8548EVXAUJD Drop-in alternate with tape/reel code Được sử dụng trong: Multiservice Switches / DSLAM Line Cards MT48LC32M16A2 Micron DDR2 SDRAM companion memory Được sử dụng trong: Multiservice Switches / DSLAM Line Cards MPC8548EPXAQJD557 Same-family variant for industrial temperature Được sử dụng trong: Wireless Base Station Controllers T2080NXE8MQB Higher-end QorIQ successor for next-gen designs Được sử dụng trong: Wireless Base Station Controllers MPC8548EPXAUJD557 NXP Semiconductors Được sử dụng trong: Defense and Aerospace Secure Communications XCV400E Companion FPGA for baseband processing Được sử dụng trong: Defense and Aerospace Secure Communications MPC8536EBXAUQH Lower-cost same-package alternative for cost-sensitive industrial use Được sử dụng trong: Industrial Control and SCADA Gateways DS34S132GN Ethernet PHY for industrial ring topology Được sử dụng trong: Industrial Control and SCADA Gateways MPC8548EPXAVJD Lower-speed drop-in for cost-reduced designs Được sử dụng trong: Storage Area Network Controllers 88SX7042 Marvell SATA controller for disk-side bridging Được sử dụng trong: Storage Area Network Controllers
What is the MPC8548EPXAUJD557?
The MPC8548EPXAUJD557 is a PowerQUICC III communications processor from NXP (formerly Freescale), integrating a single e500 Power Architecture core running up to 1.333 GHz with SEC 3.0 cryptographic acceleration, dual DDR2 controllers, four Gigabit Ethernet MACs, two PCI Express interfaces, two Serial RapidIO endpoints, and dual PCI/PCI-X, in a 783-pin FCPBGA (29x29) package with 0 to 105C industrial temperature rating. According to the NXP datasheet, it is part of the MPC8548E PowerQUICC III family targeted at secure routing and switching.
What is the core architecture and frequency of the MPC8548EPXAUJD557?
The MPC8548EPXAUJD557 uses the Power Architecture e500 core, a 32-bit superscalar embedded processor core, with a maximum operating frequency of 1.333 GHz. The e500 supports Book-E architecture extensions and is paired with 36-bit physical addressing for memory above the 4 GB boundary. According to NXP, the e500 in this family is paired with hardware table-walk and MMU for full virtualization support.
What package does the MPC8548EPXAUJD557 come in?
The MPC8548EPXAUJD557 is housed in a 783-ball FCPBGA (Flip-Chip Plastic Ball Grid Array) measuring 29x29 mm. The high pin count accommodates parallel DDR2, multiple Ethernet, PCIe, SRIO, PCI/PCI-X, and management interfaces. The FCPBGA requires a multilayer PCB with controlled-impedance routing per NXP application note AN2589 for reliable operation.
How much does the MPC8548EPXAUJD557 cost?
The MPC8548EPXAUJD557 is priced around $665.26 per unit at qty 1 as of 2026-10-16, with volume pricing dropping to approximately $519.50 per unit at qty 1000. Pricing varies across distributors such as DigiKey, Mouser, LCSC, and Avaq. Stock is generally limited as the part is positioned for long-lifecycle networking infrastructure deployments.
Is the MPC8548EPXAUJD557 in stock?
Stock of the MPC8548EPXAUJD557 is limited to specialty distributors (Rochester Electronics, Avaq, LCSC) rather than mainstream catalog channels, as of 2026-10-16. Lead times for higher quantities may extend several weeks. For prototype quantities, distributors with NXP franchised inventory can confirm availability on request, otherwise expect long-term supply via authorized aftermarket channels.
What is the lead time for the MPC8548EPXAUJD557?
Lead time for the MPC8548EPXAUJD557 typically runs 8 to 14 weeks when sourced through franchised NXP distributors, as of 2026-10-16. Aftermarket and obsolete-component specialists (Rochester Electronics, LCSC) may have on-hand stock but at premium pricing. For production programs, design teams should secure a multi-year supply agreement up front due to the long lifecycle of networking infrastructure designs.
Where can I download the MPC8548EPXAUJD557 datasheet?
The official MPC8548EPXAUJD557 datasheet (MPC8548E PowerQUICC III data sheet) is hosted on NXP's website at nxp.com. The datasheet covers electrical characteristics, pinout, timing diagrams, and programming model. Mirror copies are also available at Mouser and DigiKey product pages, which link to the NXP PDF. Free registration is not required to download.
Where can I find the pinout for the MPC8548EPXAUJD557?
The pinout for the MPC8548EPXAUJD557 is documented in section 2 of the NXP MPC8548E datasheet, which lists all 783 FCPBGA ball assignments including DDR2 byte lanes, Ethernet SerDes, PCIe lanes, SRIO lanes, PCI/PCI-X bus, JTAG, and power/ground balls. The signal groupings are also summarized in the hardware specification document and the PowerQUICC III reference manual.
What is the difference between MPC8548E and MPC8548?
The MPC8548E integrates the SEC (Security Engine) cryptographic accelerator for hardware-accelerated DES/3DES/AES/RSA/ECC, while the non-E MPC8548 omits this block. According to NXP documentation, the E suffix is the only difference in part number for the MPC8548 family; pinout and software are otherwise compatible. Choose MPC8548E for VPN/Security/SSL acceleration, choose MPC8548 to reduce cost when encryption is not required.
What is the difference between MPC8548 and MPC8536?
The MPC8548 integrates four Gigabit Ethernet MACs plus security engine (E version) and dual DDR2 controllers, while the MPC8536 is a lower-cost variant with reduced I/O. According to NXP documentation, both belong to the PowerQUICC III MPC85xx family and share the e500 core, but differ in I/O count and target applications. The MPC8548E targets secure routing/switching line cards; the MPC8536 targets cost-sensitive networking applications.
What is the best drop-in replacement for the MPC8548EPXAUJD557?
Drop-in replacements for the MPC8548EPXAUJD557 are limited because the 783-FCPBGA package and the specific e500+DDR2+SEC combination are tightly coupled to the MPC85xx family. The closest same-package alternatives are other MPC8548E speed grades (such as MPC8548EPXAUJ speeds slower than 1.333 GHz) - these share the exact 783-FCPBGA footprint and pinout. For pin-compatible alternatives that simply upgrade speed within the same family, see the alternatives list on this page.
MPC8548EPXAUJD557 vs P2020 - which is better for secure routing?
For secure routing with hardware cryptography, the MPC8548EPXAUJD557 is generally preferred because it integrates both the SEC 3.0 cryptographic accelerator and dual DDR2 controllers, whereas the P2020 (QorIQ family) is a successor but uses a different package and pinout. The MPC8548E is better when you must stay on the existing 783-FCPBGA board design; the P2020 requires a new PCB. For greenfield designs targeting newer code, the QorIQ P-series typically wins on performance-per-watt.
When should I choose the MPC8548EPXAUJD557 over newer QorIQ parts?
Choose the MPC8548EPXAUJD557 when you need to preserve an existing PowerQUICC III design with the 783-FCPBGA footprint, when your BSP and software are already validated on PowerQUICC III, or when long-term supply continuity is critical for deployed infrastructure. Newer QorIQ parts (P-series, T-series) typically require a new PCB layout, new boot code, and new toolchain migration. For greenfield designs, evaluate the QorIQ P2020 or T1042 instead, but plan for the cost of a board redesign.
Is the MPC8548EPXAUJD557 suitable for industrial applications?
The MPC8548EPXAUJD557 is rated 0 to 105C operating temperature, making it suitable for industrial temperature environments but not full automotive (-40 to +125C) applications. According to NXP, the device is targeted at communications infrastructure and industrial control where extended thermal support is required. For automotive-grade designs, choose a part with AEC-Q100 qualification.
What is the operating voltage of the MPC8548EPXAUJD557?
The MPC8548EPXAUJD557 has multiple supply rails (Vdd core, DDR2 I/O, Ethernet SerDes, auxiliary supplies) per NXP datasheet. Exact rail voltages and sequencing are listed in the electrical characteristics section of the datasheet. Refer to the NXP MPC8548E data sheet for the full recommended operating conditions table before designing the power tree.
What tools support the MPC8548EPXAUJD557?
The MPC8548EPXAUJD557 is supported by NXP's CodeWarrior development tools, plus GCC-based e500 toolchains from the LTIB/Yocto BSP layer. According to NXP documentation, the Linux kernel and U-Boot both support the MPC85xx family out of the box. JTAG debug uses NXP's CodeWarrior TAP or compatible third-party probes.
What is the security engine (SEC) on the MPC8548EPXAUJD557?
The MPC8548EPXAUJD557 integrates the SEC 3.0 cryptographic accelerator which performs hardware-accelerated DES, 3DES, AES, RSA, and ECC operations, plus public-key exponentiation, random number generation, and HMAC-SHA. According to NXP, the SEC offloads cryptographic work from the e500 core, enabling wire-speed encryption on multi-gigabit Ethernet links without CPU saturation. This makes the part ideal for VPN/IPsec/SSL termination in routers and security appliances.
Can the MPC8548EPXAUJD557 be used in defense or aerospace applications?
Yes, the MPC8548EPXAUJD557 is widely used in defense and aerospace communications equipment because of its integrated SEC 3.0 cryptographic engine, deterministic e500 core, and long lifecycle. The 0 to 105C operating range supports ground and shipboard deployments. NXP also offers extended-temperature and MIL-spec variants within the PowerQUICC III family for harsher environments.

Dữ liệu tham khảo kỹ thuật cho MPC8548EPXAUJD557 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MPC8548EPXAUJD557 for new designs or maintenance of existing PowerQUICC III boards requiring 1.333 GHz performance, hardware SEC 3.0 cryptography, and four Gigabit Ethernet MACs in a 783-FCPBGA footprint. For cost-sensitive industrial designs where only two Ethernet MACs are needed, the MPC8536EBXAUQH is a lower-cost alternative in the same 783-FCPBGA package. For designs that require lower power dissipation or a slightly lower core speed, the MPC8548EPXAVJD (1.0 GHz) is a drop-in option. For greenfield designs without legacy software constraints, evaluate NXP's QorIQ P-series (P2020) or T-series (T1042) for better performance-per-watt, but plan for a board redesign because the package and pinout are different.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MPC8548EPXAUJ MPC8548EVXAUJD MPC8548EPXAQJD557 MPC8536EBXAUQH MPC8548EPXAVJD
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 783-FCPBGA (29x29) 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same
Core Architecture Power Architecture e500 Power Architecture e500 Power Architecture e500 Power Architecture e500 Power Architecture e500 Power Architecture e500
Security Engine (SEC) Yes (SEC 3.0) Yes (SEC 3.0) Yes (SEC 3.0) Yes (SEC 3.0) Yes (SEC 3.0) Yes (SEC 3.0)
Gigabit Ethernet MACs 4 4 4 4 2 4
PCI Express 2x PCIe 2x PCIe 2x PCIe 2x PCIe 2x PCIe 2x PCIe
Operating Temperature 0C to +105C 0C to +105C 0C to +105C 0C to +105C 0C to +105C 0C to +105C

Bảo phân biệt quan trọng

  • Hardware cryptographic acceleration integrated on-chip (vsMPC8536EBXAUQH)
  • Higher core frequency within same package (vsMPC8548EPXAVJD)
  • Four Gigabit Ethernet MACs in a single SoC (vsMPC8536EBXAUQH)

Ghi chú thiết kế

The 783-FCPBGA package requires a multilayer PCB with internal power planes and microvia/stacked-via technology for fan-out. Per NXP application note AN2589, maintain 50 ohm controlled-impedance traces for DDR2, Ethernet SerDes, and PCIe/SRIO differential pairs. Match DDR2 byte-lane trace lengths within 25 mil and use fly-by topology for command/address signals to avoid timing violations at 1.333 GHz core frequency.

Estimated: at 1.333 GHz core frequency with all four Ethernet MACs and SEC active, total power dissipation is approximately 8 to 10 W. The 783-FCPBGA package requires thermal vias under the die and a copper spreader to keep junction temperature below 105C. Use thermal interface material if attaching an external heatsink, and verify with a thermal probe under full load before sealing the enclosure.

Do not skip the DDR2 calibration sequence - both controllers require run-time calibration via the SPD EEPROM on I2C. Place the DDR2 SDRAM devices within 25 mm of the BGA to minimize signal integrity issues. Power-on reset sequencing between Vdd core, DDR2 I/O, and SerDes supplies must follow the order specified in the datasheet; otherwise the device may latch into an unrecoverable state.

SerDes lanes (PCIe, SRIO, SGMII) require AC-coupling capacitors placed close to the transmitter. Reference NXP AN2826 for PCIe layout and AN2935 for SRIO layout. Do not route SerDes pairs across PCB splits; maintain a continuous ground reference plane beneath each pair. Differential intra-pair skew should not exceed 5 mil to meet 6.25 Gbps SRIO and 5 Gbps PCIe Gen 2 jitter budgets.

Thông tin tuân thủ

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
Không chì
Yes
Không halogen
Yes
Khoáng vật xung đột
Compliant

RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - this part is intended for communications infrastructure, not automotive. For defense applications, verify with NXP whether the specific lot is compliant with customer-specific export-control and MIL-spec requirements.

Dữ liệu được xác minh vào: 2026-10-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MPC8548EPXAUJD557 MPC8548EPXAUJD557 datasheet NXP MPC8548E PowerQUICC III Freescale MPC8548E 1.333GHz 783-FCPBGA communications processor PowerQUICC III secure router SoC MPC8548E vs P2020 MPC8548E drop-in replacement buy MPC8548EPXAUJD557 MPC8548E price lead time MPC8548E pinout FCPBGA e500 communications processor industrial

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors Freescale Semiconductor MPC8548EPXAUJD557 MPC8548E PowerQUICC III MPC85xx Power Architecture e500 783-FCPBGA DDR2 SDRAM Gigabit Ethernet MAC SGMII PCI Express Serial RapidIO PCI/PCI-X SEC 3.0 AES DES 3DES RSA ECC FCPBGA package family BGA surface mount embedded MPU communications processor secure router DSLAM line card base station controller SCADA gateway defense secure communications RoHS REACH Book-E architecture QorIQ P-series CodeWarrior U-Boot Linux kernel
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ