MPC8572EVTARLD - PowerQUICC III MPU, 1.067 GHz, 1023-FCBGA | NXP MPC8572EVTARLD bởi NXP Semiconductors - thành phần điện tử
NXP Semiconductors

MPC8572EVTARLD - PowerQUICC III MPU, 1.067 GHz, 1023-FCBGA | NXP

MPN: MPC8572EVTARLD ✗ Cuối đời
1.1 V (core); 1.8 V / 2.5 V / 3.3 V (I/O per datasheet listing) Vdss 1023-FCBGA (33x33 mm) Package 1.067 GHz Speed DDR2 with ECC Memory
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

MPC8572EVTARLD Tóm tắt

The NXP MPC8572EVTARLD is a dual-core PowerPC e500 microprocessor from the PowerQUICC III family, clocked at 1.067 GHz and housed in a 1023-ball FCBGA (33x33 mm) package. It integrates two 32-bit e500 cores with 32 KB L1 instruction cache and 32 KB L1 data cache per core, plus a 1 MB shared L2 cache, making it suitable for high-throughput communications processing.

An MPU (Microprocessor Unit) is a system-on-chip processor that integrates one or more CPU cores with memory controllers, I/O peripherals, and on-chip accelerators. The MPC8572E is a communications MPU, a hypernym for processors that combine general-purpose compute with hardware offload for networking workloads such as TDM, Ethernet, HDLC, and ATM. It sits within the broader taxonomy: PowerPC e500 core -> PowerQUICC III family -> communications MPU -> microprocessor -> semiconductor device. It uses a Power Architecture instruction set and is built on a 90 nm CMOS process.

Key features include dual e500 cores at 1.067 GHz, DDR2 memory controller with ECC, three 10/100/1000 Ethernet MACs supporting SGMII and RGMII, four TDM interfaces, two PCI Express interfaces, and a Serial RapidIO interface. The 1023-FCBGA package exposes all peripherals while keeping board footprint manageable for line cards, base stations, and enterprise routers.

This IC belongs to NXP's PowerQUICC III family targeting wired and wireless infrastructure. The architecture pairs general-purpose processing with packet and signalling accelerators, allowing simultaneous handling of control-plane and data-plane traffic on a single device. The dual-core topology plus coherent L2 supports symmetric multiprocessing for routing and bridging applications. The 0.09 µm process and 1.067 GHz clock enable deterministic throughput for QoS-sensitive traffic.

Typical applications include multiservice routers, DSLAM line cards, wireless base station controllers, industrial control planes, and enterprise switching platforms. The combination of DDR2/PCIe/RapidIO and TDM/Ethernet MACs makes the device a versatile platform for legacy and next-generation communications equipment.

Designers should validate thermal dissipation at full load because the 1023-FCBGA drives significant heat through the top-side heat spreader; package thermal resistance data should be reviewed against the end system cooling budget before board layout finalization.

This page synthesizes authoritative NXP datasheet extracts, distributor pricing snapshots, and drop-in same-family NXP alternatives to give engineers a faster path to sourcing and second-source qualification than the manufacturer datasheet alone.

Bộ thay thế dễ dàng lắp đặt cho MPC8572EVTARLD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC8572EVTARLD (cùng hình factor và footprint) — khác nhau ở L1 Cache (per core), L2 Cache, Mounting Type, Process Technology, RoHS Status.

NXP Semiconductors
L1 Cache (per core): 32 KB I-cache + 32 KB D-cache
L2 Cache: 1 MB shared, ECC
Mounting Type: Surface Mount
So sánh với MPC8572EVTARLD →

MPC8572EVTARLE

✅ Drop-In
📦 1023-FCBGA (33x33 mm)
Same die and 1023-FCBGA package, lower speed bin (LD vs LE suffix) - pin-compatible within 70% of clock

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8572ECVTARLD

✅ Drop-In
📦 1023-FCBGA (33x33 mm)
Commercial temperature grade variant, identical 1.067 GHz clock, same pinout

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8572EPVTARLD

✅ Drop-In
📦 1023-FCBGA (33x33 mm)
Extended temperature grade variant, same die, pin-to-pin compatible

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8572EVTAULE

✅ Drop-In
📦 1023-FCBGA (33x33 mm)
Lower-speed bin of the same MPC8572E family, identical 1023-FCBGA footprint

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8572EPVTARLE

✅ Drop-In
📦 1023-FCBGA (33x33 mm)
Extended temperature grade + lower speed bin, same pinout

📋 Tham chiếu thay thế (không có trong danh mục)

MPC8572EVTARLD Tỷ lệ tối đa & tính chất điện

Processor Type PowerPC e500 MPU, MPC85xx PowerQUICC III
Core Count 2 (dual-core)
Bề rộng đường dữ liệu 32-bit
Tần số xung maksimum 1.067 GHz
Operating Voltage 1.1 V (core); 1.8 V / 2.5 V / 3.3 V (I/O per datasheet listing)
Process Technology 90 nm CMOS
L1 Cache (per core) 32 KB instruction + 32 KB data
L2 Cache 1 MB shared
Hộp 1023-FCBGA (33x33 mm)
Kiểu lắp đặt Surface Mount (BGA)
Memory Controller DDR2 with ECC
Ethernet MACs Three 10/100/1000 (SGMII/RGMII)
PCI Express 2 interfaces
Serial RapidIO Yes
TDM Interfaces 4
Trạng thái RoHS Compliant (Pb-Free per Freescale datasheet)

Hướng dẫn cấu hình chân MPC8572EVTARLD 1023-fcbga (33x33 mm)

Cấu hình chân cho MPC8572EVTARLD (1023-fcbga (33x33 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 1023-fcbga (33x33 mm) cho MPC8572EVTARLD

Không có dữ liệu chân cụ thể sẵn có cho MPC8572EVTARLD.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MPC8572EVTARLD phù hợp cho 6 Áp dụngs: Multiservice Router Control Plane, DSLAM / Access Line Card, Wireless Base Station Controller, Industrial Control / Substation Router, Enterprise Edge Switching Platform, Storage Area Network / NAS Controller.

🌐

Multiservice Router Control Plane

The MPC8572EVTARLD's dual e500 cores at 1.067 GHz with shared 1 MB L2 cache let it handle simultaneous routing protocol stacks (OSPF, BGP, IS-IS) and forwarding-plane exceptions. The DDR2 controller with ECC protects routing tables in main memory while three Gigabit Ethernet MACs provide native SGMII/RGMII links to switch fabric PHYs without an external MAC. Two PCI Express and Serial RapidIO ports scale the device into modular chassis, satisfying throughput budgets in enterprise multiservice routers.

Được đề xuất

MPC8536E (Lower-cost single-core sibling for SOHO routers) P2020 (QorIQ successor for next-gen designs)
🌐

DSLAM / Access Line Card

In DSLAM line cards the MPC8572EVTARLD's four TDM interfaces aggregate legacy E1/T1 PCM streams from many subscriber lines, while the DDR2 controller buffers packet payloads during QoS scheduling. The dual-core topology dedicates one e500 to the control plane (SNMP, layer-2/3 termination) and the other to the data plane (shaping, policing, ATM/TDM interworking), giving deterministic service at line rate across thousands of subscribers.

Được đề xuất

MPC8572ECVTARLD (Commercial-temperature variant for indoor DSLAM) MPC8536E (Lower-density variant for small DSLAMs)
📡

Wireless Base Station Controller

The MPC8572EVTARLD's combination of two e500 cores, Serial RapidIO, PCI Express, and TDM ports makes it a strong BSC platform: one core runs real-time signalling (SS7, SCTP) while the other handles IP backhaul. The 1.067 GHz core frequency sustains control-plane latency below typical 2G/3G call-setup budgets. Ruggedized base-station enclosure designs can use the extended-temperature MPC8572EPVTARLD variant.

Được đề xuất

MPC8572EPVTARLD (Extended-temperature drop-in variant) P2041 (QorIQ successor for LTE base stations)
🏭

Industrial Control / Substation Router

Industrial substation routers benefit from the MPC8572EVTARLD's deterministic DDR2 throughput, IEEE 1588 timestamping hooks in the Ethernet MACs, and rugged package that tolerates industrial thermal envelopes when paired with the 'PVTARLD' extended-temperature variant. The dual-core topology separates real-time IEC 61850 GOOSE processing from operator UI / management traffic without compromising packet ordering on the wire.

Được đề xuất

MPC8572EPVTARLD (Extended-temperature drop-in variant) MPC8572EVTARLE (Lower-speed drop-in variant)
🖥️

Enterprise Edge Switching Platform

Enterprise edge switches use the MPC8572EVTARLD as the management/control CPU behind merchant silicon PHYs and switching ASICs. PCI Express x4 lanes connect to external switch fabrics while the three Gigabit Ethernet MACs provide OOB management and uplinks. DDR2 ECC memory protects management stacks from soft errors, and the dual-core topology isolates the control-plane shell from forwarding-plane exception handling.

Được đề xuất

MPC8536E (Lower-cost variant for small switches) P2020 (Migration to QorIQ for new edge designs)
🖥️

Storage Area Network / NAS Controller

NAS and SAN controllers benefit from the MPC8572EVTARLD's large 1 MB L2, which accelerates the file-system metadata caches frequently used by SMB/CIFS and NFS workloads. Serial RapidIO links connect to RAID controllers, while PCI Express provides expansion to 10 GbE NICs. The 1.067 GHz dual-core topology parallelises metadata staging and packet transmit, sustaining throughput under heavy random-access loads.

Được đề xuất

MPC8536E (Single-core variant for entry-level NAS) P2041 (QorIQ successor with DDR3 for higher throughput)

Tóm tắt các sản phẩm được đề xuất

MPC8536E Lower-cost single-core sibling for SOHO routers Được sử dụng trong: Multiservice Router Control Plane, DSLAM / Access Line Card, Enterprise Edge Switching Platform, Storage Area Network / NAS Controller P2020 QorIQ successor for next-gen designs Được sử dụng trong: Multiservice Router Control Plane, Enterprise Edge Switching Platform MPC8572ECVTARLD Commercial-temperature variant for indoor DSLAM Được sử dụng trong: DSLAM / Access Line Card MPC8572EPVTARLD Extended-temperature drop-in variant Được sử dụng trong: Wireless Base Station Controller, Industrial Control / Substation Router P2041 QorIQ successor for LTE base stations Được sử dụng trong: Wireless Base Station Controller, Storage Area Network / NAS Controller MPC8572EVTARLE Lower-speed drop-in variant Được sử dụng trong: Industrial Control / Substation Router
What is the MPC8572EVTARLD?
The MPC8572EVTARLD is a dual-core PowerPC e500 microprocessor from NXP's PowerQUICC III family, running at 1.067 GHz and housed in a 1023-ball FCBGA (33x33 mm) package. According to NXP's Freescale-originated datasheet, the device integrates two e500 cores with 32 KB L1 caches per core plus a shared 1 MB L2, a DDR2 memory controller with ECC, three Gigabit Ethernet MACs, two PCI Express ports, Serial RapidIO, and four TDM interfaces for legacy telecom signalling.
How many cores does the MPC8572EVTARLD have and what is the clock speed?
The MPC8572EVTARLD has two PowerPC e500 cores that operate at up to 1.067 GHz, as listed on NXP's product family page and confirmed across distributor catalog entries. Each core has its own 32 KB instruction cache and 32 KB data cache, and the two cores share a 1 MB L2 cache. This dual-core topology allows symmetric multiprocessing for communications workloads that need control-plane and data-plane running concurrently.
Where can I download the MPC8572EVTARLD datasheet PDF?
The official MPC8572EVTARLD hardware specifications datasheet is published by NXP and traces back to the Freescale document family originally titled "MPC8572E PowerQUICC III Integrated Processor Hardware Specifications." It can be downloaded from the NXP product page (linked from nxp.com/docs) and from third-party archives such as alldatasheet.com. The document covers electrical characteristics, pinout, AC timing, and boot configuration for the 1023-FCBGA device.
What package does the MPC8572EVTARLD use and how many pins does it have?
The MPC8572EVTARLD ships in a 1023-ball flip-chip BGA measuring 33x33 mm per the NXP datasheet. The high ball count is required to expose the dual e500 cores, DDR2 controller, three Gigabit Ethernet MACs, two PCI Express lanes, Serial RapidIO, four TDM ports, and the local bus I/O. The package is surface mount and requires a multi-layer PCB with controlled-impedance routing and via-in-pad capability for the BGA escape.
Is the MPC8572EVTARLD still in production?
As of the latest distributor catalogues (October 2026), the MPC8572EVTARLD is in an NRND (Not Recommended for New Designs) lifecycle state, with remaining stock offered through authorized and open-market distributors such as Rochester Electronics. NXP has migrated most new designs to the QorIQ communications processor families such as P2020/P2041 and later Layerscape devices. Designers should plan a migration path for new product introductions.
What is the price of the MPC8572EVTARLD in single-piece quantity?
At a quantity of one piece, the MPC8572EVTARLD is priced at approximately $285 USD as of October 2026, based on distributor listings tracked across DigiKey and Mouser. Volume pricing drops to roughly $205 USD per piece at the 1000-piece break. Because the part is NRND with constrained supply, single-piece pricing is volatile; requesting a quote is recommended for project budgeting.
Is the MPC8572EVTARLD in stock and what is the lead time?
As of October 2026 the MPC8572EVTARLD is available only through limited inventory channels: Rochester Electronics is showing active stock via DigiKey (per the verified distributor result), and brokers on Mouser list the part with extended lead times. For new production builds you should request a quote from authorized distributors; lead times for the 1023-FCBGA typically run 12–18 weeks given its NRND status.
Where to buy MPC8572EVTARLD online?
Engineers can source the MPC8572EVTARLD online through DigiKey (Rochester Electronics line card), Mouser, and authorized brokers listed in Octopart. Quarktwin Technology, Heisener, and NX-Online also display current stock. Because the part is NRND, always verify the supplier's traceability paperwork and avoid distributors that cannot provide lot-date-code and MSL documentation for the 1023-FCBGA.
What is the difference between MPC8572EVTARLD and MPC8572EVTAULE?
Both parts share the same 1023-FCBGA package and dual e500 core architecture, but MPC8572EVTARLD runs the e500 cores at 1.067 GHz whereas MPC8572EVTAULE operates in a lower-clock speed grade per NXP's MPC8572E speed-bin table. The 'LD' suffix also designates a specific junction-temperature grade. Pin-out and footprints are identical, so the two parts are drop-in interchangeable for software bring-up as long as the clock-divider and speed-bin straps are re-validated.
What is the difference between MPC8572EVTARLD and MPC8536E?
The MPC8572E is a dual-core communications processor with 1 MB L2 and Serial RapidIO, while the MPC8536E is a single-core e500 device in the same PowerQUICC III family with a smaller L2 and a different peripheral mix. The MPC8572E targets line cards, DSLAMs, and base station controllers; the MPC8536E was aimed at lower-cost SOHO routers and gateways. Both share the 1023-FCBGA, so they can sometimes be swapped after thermal and BIOS re-validation.
Can MPC8572E be replaced by a QorIQ part on the same PCB?
No, the NXP QorIQ P2xxx and Layerscape series do not share the 1023-FCBGA footprint with the MPC8572E, so a PCB swap requires a board respin. QorIQ parts use different packages (typically 780-FCBGA or smaller) and updated pin maps. Engineers migrating from PowerQUICC III to QorIQ should treat it as a new design; the power management, DDR2/DDR3 controller, and SERDES routing all differ.
What is the best drop-in replacement for MPC8572EVTARLD?
The best drop-in replacement for the MPC8572EVTARLD is the MPC8572EVTARLE or MPC8572EVTAULE, which use the identical 1023-FCBGA package and pinout. Across the broader PowerQUICC III family, MPC8572ECVTARLD and MPC8572EPVTARLD offer pin-compatible variants with different temperature grades. No third-party drop-in equivalent exists because the e500 core and its debug/boot interface are NXP-only IP, so cross-brand replacements are not pin-compatible.
What is the best NXP alternative for new designs?
For new designs requiring the PowerQUICC III feature set, NXP recommends migrating to the QorIQ P2020 or P2041 communications processors, which provide dual e500 cores at higher clock speeds with newer DDR3 controllers and updated SERDES. These parts require a fresh PCB layout due to a different package and pinout, but they share the same Power Architecture toolchain (CodeWarrior, GCC) and a coherent migration path from PowerQUICC III firmware.
What are the key specifications of MPC8572EVTARLD that engineers should know?
The key specifications are: dual PowerPC e500 cores at 1.067 GHz, 32 KB L1 per core, 1 MB shared L2, DDR2 memory controller with ECC, three 10/100/1000 Ethernet MACs (SGMII/RGMII), two PCI Express interfaces, Serial RapidIO, four TDM ports, 1.1 V core supply, and 1023-FCBGA 33x33 mm package. All of these numbers are sourced from the NXP/Freescale hardware specifications document and confirmed across the distributor product listings.
Is MPC8572EVTARLD RoHS compliant?
Yes, the MPC8572EVTARLD is RoHS compliant per the Freescale/NXP datasheet. The part is marked "Pb-Free" in the official product family collateral, satisfies the lead-free reflow profile requirements of JEDEC J-STD-020, and is supplied in trays compatible with lead-free assembly lines. REACH compliance and conflict-minerals status should be confirmed against the latest NXP material declaration before use in EU markets.

Dữ liệu tham khảo kỹ thuật cho MPC8572EVTARLD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MPC8572EVTARLD when you need the maximum clock speed (1.067 GHz) within the dual-core MPC8572E family for symmetric-multiprocessing workloads such as routing protocol stacks, base-station controllers, and DSLAM line cards. Choose the MPC8572EVTARLE if a lower speed bin is acceptable in exchange for lower power consumption and possibly higher availability under NRND conditions. For new designs, plan a migration to NXP's QorIQ P2020 or P2041 devices, which require a PCB respin but provide DDR3, updated SERDES, and a longer lifecycle.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MPC8572EVTARLE MPC8572ECVTARLD MPC8572EPVTARLD MPC8572EVTAULE MPC8572EPVTARLE
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 1023-FCBGA (33x33 mm) 1023-FCBGA (33x33 mm) - same 1023-FCBGA (33x33 mm) - same 1023-FCBGA (33x33 mm) - same 1023-FCBGA (33x33 mm) - same 1023-FCBGA (33x33 mm) - same
Core Count 2 (dual e500) 2 (dual e500) 2 (dual e500) 2 (dual e500) 2 (dual e500) 2 (dual e500)
Clock Frequency 1.067 GHz Lower speed bin (within 20%) 1.067 GHz 1.067 GHz Lower speed bin (within 20%) Lower speed bin (within 20%)
L2 Cache 1 MB shared 1 MB shared 1 MB shared 1 MB shared 1 MB shared 1 MB shared
DDR2 Memory Controller Yes (with ECC) Yes (with ECC) Yes (with ECC) Yes (with ECC) Yes (with ECC) Yes (with ECC)
Ethernet MACs 3x GbE (SGMII/RGMII) 3x GbE (SGMII/RGMII) 3x GbE (SGMII/RGMII) 3x GbE (SGMII/RGMII) 3x GbE (SGMII/RGMII) 3x GbE (SGMII/RGMII)
Temperature Grade Industrial / extended Industrial / extended Commercial Extended Industrial / extended Extended
Pin Compatible Yes (this part) Yes (drop-in) Yes (drop-in) Yes (drop-in) Yes (drop-in) Yes (drop-in)

Bảo phân biệt quan trọng

  • True dual-core topology in the 1023-FCBGA package (vsMPC8536E)
  • Shared 1 MB L2 cache versus smaller L2 in single-core family members (vsMPC8572EVTARLE)
  • Pin-compatible across speed bins and temperature grades (vsMPC8572EPVTARLD)

Ghi chú thiết kế

The 1023-FCBGA (33x33 mm) package requires a top-side heat spreader with thermal interface material rated for at least 3 W/K thermal resistance from the spreader to the chassis cold plate. Estimated: at 1.067 GHz dual-core utilisation with the DDR2 controller active, expect 8–12 W of dissipation in continuous operation. Validate package theta_J-A from the NXP hardware specifications document against your enclosure cooling budget before tape-out.

Use a minimum 12-layer PCB with via-in-pad for the 1023-ball BGA escape. Match DDR2 trace lengths within 25 mils and route one differential pair per SERDES lane with 100-ohm differential impedance. The RapidIO and PCI Express lanes are AC-coupled - place the capacitors close to the device-side balls, not the connector side. Apply a continuous reference plane under the BGA to maintain power delivery and reduce SSO noise.

Do not reuse the boot configuration word (cfg_rcw) from a P2020 or Layerscape reference design - the e500 core's reset controller and LAW/PCI mapping are PowerQUICC III-specific. Verify cfg_rcw against the MPC8572E reference manual section covering reset and boot before assembly. Also confirm the DDR2 calibration firmware is re-run for each new board revision, since the e500 memory controller does not retain calibration constants across power cycles.

The Serial RapidIO lanes and PCI Express lanes both require reference clock jitter of at most 1 ps RMS; a low-jitter clock generator is mandatory. Route these clocks over a continuous ground reference, never across plane splits. JEDEC-standard SSO/EMI simulations should be run against the BGA breakout pattern because ball-pitch parasitic inductance can dominate at the 1.067 GHz core frequency.

Thông tin tuân thủ

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Compliant

RoHS compliance and Pb-Free status are confirmed in the original Freescale/NXP datasheet. Halogen-free status is not explicitly stated in the verified web data; confirm with the latest NXP material declaration before EU-market deployments.

Dữ liệu được xác minh vào: 2026-10-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MPC8572EVTARLD MPC8572EVTARLD datasheet NXP PowerQUICC III MPC8572 dual core e500 1.067 GHz MPU 1023 FCBGA communications processor MPC8572 vs P2020 migration PowerQUICC III drop in replacement MPC8572 buy price availability DSLAM line card processor wireless base station controller MPU MPC8572EVTARLD pinout MPC8572EVTARLD industrial temperature

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors Freescale Semiconductor MPC8572EVTARLD MPC8572EVTARLE MPC8572ECVTARLD MPC8572EPVTARLD MPC8572EVTAULE MPC8572EPVTARLE PowerQUICC III PowerPC e500 QorIQ MPU microprocessor 1023-FCBGA FCBGA package DDR2 with ECC Serial RapidIO PCI Express Gigabit Ethernet MAC TDM interface DSLAM base station controller JEDEC J-STD-020 RoHS lead-free reflow
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ