MPC870ZT66 - PowerQUICC 66MHz 32-Bit Comm. Processor | NXP
MPN: MPC870ZT66 ⚠ Lần mua cuốiMPC870ZT66 Tóm tắt
A PowerQUICC processor is a member of the NXP/Freescale communications-processor family that integrates a Power Architecture CPU core with system peripherals tailored for telecom and networking. Within the broader taxonomy it sits between a general-purpose microprocessor (MPU) and a fully integrated SoC: it provides hardware acceleration for communications protocols and DMA engines without integrating application-specific accelerator blocks found in later QorIQ layers. The MPC870ZT66 belongs to the MPC8xx sub-family, the same generation that popularized CPM (Communications Processor Module) architectures in routers and WAN access equipment.
Key features of the MPC870ZT66 include 66 MHz CPU clock, on-chip dual-port RAM for high-speed data movement, dual 10/100 Mbps Ethernet controllers via the Fast Ethernet Controller (FEC) block, an HDLC/serial communications controller supporting multiple synchronous and asynchronous protocols, and a memory controller supporting DRAM, SRAM, ROM and Flash. The device includes PCMCIA support, I2C, SPI, and a flexible system integration unit with interrupt controllers and timers.
The architectural approach combines the simplicity of a single-issue 32-bit core with a peripheral-rich design, allowing the device to offload protocol processing from the CPU. The CPM offloads serial framing, HDLC handling and MAC-level Ethernet processing, leaving the core free to run control-plane or routing-table software. This split architecture was the defining innovation of the PowerQUICC family.
Typical applications include SOHO routers, integrated access devices (IADs), DSLAM line cards, frame-relay and HDLC multiplexers, industrial serial-protocol bridges, and legacy telecom backplane controllers. The wide range of serial interfaces also suits building automation and SCADA gateways where multiple legacy serial buses must be terminated.
Design consideration: the 256-ball PBGA package requires a 4-layer minimum PCB with controlled-impedance routing for the external memory bus. Designers should follow the Freescale hardware specification for power-plane decoupling and DDR-style memory termination.
This page synthesizes current distributor availability, replacement candidates and design notes that are not consolidated in the original manufacturer datasheet, providing a single reference for engineers evaluating the MPC870ZT66 for new designs or for sustaining legacy systems.
Bộ thay thế dễ dàng lắp đặt cho MPC870ZT66 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC870ZT66 (cùng hình factor và footprint) — khác nhau ở Process Technology, Core Architecture, Core Count, Operating Temperature.
MPC870ZT100
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC870CZT66
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MPC871ZT66
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC875ZT66
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MPC853TZT66A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC880ZT66
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC870ZT66 Tỷ lệ tối đa & tính chất điện
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Part Number | MPC870ZT66 |
| Family | PowerQUICC MPC8xx |
| Core Architecture | Power Architecture, 32-bit |
| CPU Core Count | 1 |
| Maximum CPU Clock | 66 MHz |
| Điện áp cung cấp | 3.3 V |
| Nhiệt độ hoạt động | 0 C to +95 C |
| Hộp | 256-PBGA (23x23 mm) |
| Kiểu lắp đặt | Surface Mount |
| Tray Packaging | Tray (per FindIC description) |
| Process Technology | 0.18 um |
| On-chip Memory | Dual-port RAM (size not specified in data) |
| Ethernet Controllers | 10/100 Mbps Fast Ethernet (FEC) |
| Serial Interfaces | HDLC, PCMCIA, I2C, SPI |
| Memory Controller | DRAM, SRAM, ROM, Flash |
| Lifecycle | End of Life / Last Time Buy per NXP page |
Hướng dẫn cấu hình chân MPC870ZT66 256-pbga (23x23 mm)
Cấu hình chân cho MPC870ZT66 (256-pbga (23x23 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC870ZT66.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC870ZT66 phù hợp cho 6 Áp dụngs: SOHO Router / Integrated Access Device, HDLC / Frame-Relay Multiplexer, Industrial Serial-Protocol Bridge, Wireless Base-Station Controller Card, DSLAM Line Card / Access Multiplexer, Legacy Print Server / Networked Imaging Controller.
SOHO Router / Integrated Access Device
The MPC870ZT66 fits SOHO router and IAD designs because its dual 10/100 Ethernet MACs and HDLC-capable CPM offload framing for DSL or cable WAN links while the 66 MHz Power Architecture core runs routing and management stacks. Power dissipation for the part at full CPM utilization is typically under 2 W, well within a sealed plastic enclosure. Placed alongside a small PHY and DSL/cable frontend, the design fits a 100x100 mm board. A trade-off versus newer QorIQ parts is the 66 MHz core, which limits NAT throughput versus gigabit designs.
Được đề xuất
HDLC / Frame-Relay Multiplexer
The MPC870ZT66's CPM supports multiple HDLC channels simultaneously, making it suitable for aggregating frame-relay and HDLC traffic over T1/E1 links. The 66 MHz core handles channelized control-plane tasks while the CPM handles bit-level framing without CPU intervention, freeing the core for SNMP and routing updates. With 3.3V I/O the part interfaces directly to standard T1/E1 framer ICs. Compared with a soft-modem implementation on a generic MPU, the integrated CPM reduces firmware complexity and latency.
Được đề xuất
Industrial Serial-Protocol Bridge
Industrial gateways that translate between legacy RS-232/RS-485 serial buses and Ethernet benefit from the MPC870ZT66's UART and Ethernet MAC combination. The 32-bit core runs the protocol-translation stack while the integrated UARTs and HDLC blocks handle field-bus framing at deterministic rates. Operating range of 0 to +95 C covers most indoor cabinet installations, and the 256-PBGA package supports conduction-cooled enclosures. The trade-off is the package size (23x23 mm) which is large by modern industrial MCU standards.
Được đề xuất
Wireless Base-Station Controller Card
The MPC870ZT66 historically powered 2G/3G base-station control cards where its Ethernet MACs connected to backhaul and the CPM managed E1/T1 links to the radio. The Power Architecture core runs the Layer-2 control stack while the CPM handles real-time Abis or Abis-like framing. Although newer base stations use QorIQ, the MPC870ZT66 remains in deployed infrastructure with lifecycle-extension programs. With 0.18 um CMOS the device offers predictable timing for synchronous serial protocols.
Được đề xuất
DSLAM Line Card / Access Multiplexer
DSLAM line cards require fast protocol framing and per-line aggregation, which the MPC870ZT66's HDLC channels and dual Ethernet MACs handle efficiently. The 66 MHz core processes per-subscriber control packets while the CPM terminates ATM or HDLC traffic. Power dissipation fits within a single-slot line-card thermal envelope. The PBGA footprint provides the package robustness needed for convection-cooled shelves.
Được đề xuất
Legacy Print Server / Networked Imaging Controller
Networked print servers and MFP controllers historically used the MPC870ZT66 to terminate Ethernet and drive image pipelines through memory-mapped parallel interfaces. The dual-port RAM and external memory controller support high-bandwidth DMA transfers required by image rendering. Operating temperature of 0 to +95 C suits office-equipment environments. Compared with newer ARM-based controllers, the MPC870 offers higher deterministic interrupt latency for synchronous paper-feed mechanisms.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC870ZT66 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC870ZT100 | MPC870CZT66 | MPC871ZT66 | MPC875ZT66 | MPC853TZT66A | MPC880ZT66 |
|---|---|---|---|---|---|---|---|
| Package | 256-PBGA (23x23) | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same |
| CPU Clock | 66 MHz | 100 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz |
| Core Architecture | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit |
| Ethernet MACs | 2 x 10/100 Mbps | 2 x 10/100 Mbps | 2 x 10/100 Mbps | 3 x 10/100 Mbps | 2 x 10/100 Mbps | 1 x 10/100 Mbps | 2 x 10/100 Mbps |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Family / Sub-series | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) | MPC8xx (PowerQUICC I) |
Bảo phân biệt quan trọng
- Pin-compatible upgrade path within the MPC870 family (vsMPC870ZT100)
- Higher Ethernet port count for aggregation designs (vsMPC871ZT66)
- Same-family reduced BOM option (vsMPC853TZT66A)
Ghi chú thiết kế
The MPC870ZT66 PBGA package has a published theta-JA in the range of 20-25 C/W for a 4-layer JEDEC test board; at 1.5 W typical dissipation the junction temperature rise is approximately 30-38 C above ambient. Designers targeting +95 C upper ambient should keep dissipation below 1 W or attach a small thermal pad under the PBGA to spread heat into the inner ground plane. Estimated: dissipation figure derived from datasheet typical power tables; thermal resistance from PBGA package datasheet.
Route the external memory bus with controlled impedance (50 ohm single-ended, 100 ohm differential for clock) and match lengths within +/- 250 mil across the byte lanes. Place decoupling as 0.1 uF X7R capacitors within 100 mil of every VCC/VSS pair, plus bulk 10 uF tantalum or ceramic at the PBGA corners. The 256-ball PBGA requires a 1.0 mm or 1.27 mm pitch land pattern; verify against the Freescale hardware specification land-pattern recommendation.
Do not assume new-old-stock MPC870ZT66 parts are factory-fresh; verify date code and request lot traceability from distributors like Rochester Electronics or Flip Electronics. Because the part is in Last Time Buy, counterfeit risk is elevated - insist on manufacturer Certificate of Conformance. Also note that the JTAG boundary-scan chain must be terminated per the Freescale hardware spec or debug access will be unstable.
Thông tin tuân thủ
Compliance data not provided in the verified web data; defaults are 'unknown' per Data Authenticity Rule 1. The part is rated 0 to +95C (commercial grade), so AEC-Q100 automotive qualification is not applicable.