Texas Instruments

OPA704PA - 3MHz Low-Power Rail-to-Rail Op Amp | Texas Instruments

MPN: OPA704PA ✓ Hoạt động
12 V Vdss 1 pA Id 8-pin PDIP Package
MOQ: 1 |

OPA704PA Tóm tắt

The Texas Instruments OPA704PA is a single-channel CMOS operational amplifier with rail-to-rail input and rail-to-rail output capability, a 3 MHz gain-bandwidth product, and a 3 V/µs slew rate. Designed for operation from a single 12 V supply, it is offered in an 8-pin PDIP package. The device combines very low input bias current of 1 pA, maximum input offset voltage of 750 µV, and low-power operation for precision and instrumentation applications.

An operational amplifier is a voltage-feedback amplifier that uses negative feedback to amplify the voltage difference between its inverting and non-inverting inputs. In the broader electronics hierarchy, an op amp belongs to the amplifier IC and analog signal-processing categories, where its gain, bandwidth, input impedance, common-mode range, and output-drive capability determine how faithfully a small signal is amplified. The OPA704PA is specifically positioned for circuits that require low input bias current and rail-to-rail signal handling.

The principal features of the OPA704PA include 1 pA input bias current, a maximum offset voltage of 750 µV, 3 MHz gain-bandwidth, 3 V/µs slew rate, and rail-to-rail input and output operation. The very low bias current is valuable when the source impedance is high or when leakage from sensors, photodiodes, capacitors, or chemical-sensing elements would otherwise disturb the measurement. Rail-to-rail behavior allows the output to approach the supply limits more closely than a conventional non-rail-to-rail output stage.

At a 3 MHz unity-gain bandwidth, the OPA704PA provides useful bandwidth for low-frequency precision signals, signal conditioning, active filtering, and general-purpose analog gain stages. Its 3 V/µs slew rate determines how quickly the output can follow a changing input waveform. These characteristics make it suitable for instrumentation where accuracy and low input current matter more than the very high bandwidth associated with modern high-speed amplifiers.

Typical OPA704PA applications include precision sensor amplifiers, photodiode signal chains, low-current measurement circuits, data-acquisition front ends, active filters, and low-power analog signal-conditioning modules. Its single 12 V supply also simplifies designs that cannot use split rails. In battery-operated or portable equipment, the low-power operating characteristics help reduce system energy consumption while preserving useful closed-loop bandwidth.

The primary design consideration is to verify input and output voltage limits across temperature, load current, and supply tolerance before closing the feedback loop. Input and output stability must also be checked with the intended source impedance, capacitor values, and PCB layout. Because input bias current is exceptionally low, guarding and leakage control remain important around sensitive high-impedance nodes.

This product page combines manufacturer specifications, package and sourcing information, practical application guidance, and a verified drop-in replacement assessment. It helps engineers evaluate the OPA704PA alongside alternative amplifier choices while preserving the distinction between exact replacement qualification and broader functional similarity.

Bộ thay thế dễ dàng lắp đặt cho OPA704PA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

OPA704PA Tỷ lệ tối đa & tính chất điện

Number of Channels 1 channel
Product Type Single operational amplifier
Nominal Supply Voltage 12 V
Gain-Bandwidth Product 3 MHz
Slew Rate 3 V/µs
Input Bias Current 1 pA
Maximum Input Offset Voltage 750 µV
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Process Technology CMOS
Package Type 8-pin PDIP
Kiểu lắp đặt Through-hole
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân OPA704PA 8-pin pdip

Cấu hình chân cho OPA704PA (8-pin pdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin pdip cho OPA704PA

Không có dữ liệu chân cụ thể sẵn có cho OPA704PA.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

OPA704PA phù hợp cho 6 Áp dụngs: Precision Sensor Signal Conditioning, Photodiode Transimpedance Amplification, Low-Current Measurement Front End, Data-Acquisition Analog Channel, Active Filter and Equalization, Low-Power Analog Control Module.

🏭

Precision Sensor Signal Conditioning

The OPA704PA fits low-impedance-error signal conditioning around high-source-impedance sensors because its input bias current is specified at 1 pA. The amplifier can amplify a small sensor differential while its rail-to-rail input behavior supports operation near the limits of a single-supply signal range. Designers should verify the input common-mode range across supply tolerance and temperature, and they should use guarding or a protective low-leakage PCB surface when source impedances are high. The 3 MHz gain-bandwidth product supports moderate-bandwidth instrumentation stages rather than high-speed sensing.

📷

Photodiode Transimpedance Amplification

The OPA704PA is suitable for a photodiode transimpedance front end because its 1 pA input bias current minimizes the DC error associated with the detector and feedback network. Its 3 MHz gain-bandwidth product and 3 V/µs slew rate provide useful response for moderate-speed optical measurements. The photodiode node must remain short and clean, and the feedback capacitor should be selected using the manufacturer stability guidance for the chosen transimpedance gain. Guarding is important when leakage from the board or connectors is comparable to the detector current.

⚡

Low-Current Measurement Front End

The OPA704PA can serve as the amplifier in a low-current measurement chain where sensor leakage and amplifier bias current would otherwise obscure the signal. Its 1 pA input bias current is the central benefit, while the maximum input offset voltage of 750 µV establishes the initial DC error that must be considered during calibration. Rail-to-rail output operation can help preserve measurement span in a single-supply design. Use clean connectors, guard structures, and low-leakage insulation, and verify offset drift, noise, and bias-current behavior over the full intended temperature range.

🖥️

Data-Acquisition Analog Channel

OPA704PA-based analog channels can condition low-level inputs before an ADC in data-acquisition equipment. The amplifier’s 3 MHz gain-bandwidth product gives adequate loop bandwidth for many moderate-rate measurements, and its 3 V/µs slew rate limits large-signal distortion during channel transitions. Rail-to-rail input and output characteristics are useful when the converter’s input range must be approached closely. The design should include gain-error analysis, source-impedance limits, ADC drive settling, and any required isolation or anti-alias filtering ahead of the converter.

🔧

Active Filter and Equalization

The OPA704PA is appropriate for active filtering, equalization, and gain stages where low bias current and rail-to-rail operation are more important than very high bandwidth. Its 3 MHz gain-bandwidth product supports filters with moderate upper cutoffs, while the 750 µV maximum offset voltage must be included when the stage also performs DC amplification. Component tolerances and the amplifier’s finite gain and output-drive behavior can shift the realized response. Validate stability and corner accuracy using the manufacturer’s recommended passive values and the actual PCB layout.

🔧

Low-Power Analog Control Module

OPA704PA can be used in compact, single-supply analog control modules that combine sensing and conditioning without requiring a dual-rail amplifier. The CMOS device is identified as a low-power 12 V operational amplifier, while its 1 pA bias current supports high-impedance control nodes. Rail-to-rail operation increases usable output range, and the 3 MHz bandwidth provides adequate response for many slow control loops. Designers should verify output-current capability for the driven load, confirm shutdown behavior when applicable, and ensure the selected operating point remains inside the datasheet’s electrical limits.

What is the OPA704PA?
The OPA704PA is a single-channel CMOS operational amplifier with rail-to-rail input and output capability, a 3 MHz gain-bandwidth product, and a 3 V/µs slew rate. Texas Instruments specifies it for operation from a single 12 V supply in an 8-pin PDIP package. Its 1 pA input bias current makes it especially useful for high-impedance sensor and precision measurement circuits where amplifier input leakage could otherwise create a significant error.
What are the key specifications of OPA704PA?
The key OPA704PA specifications are a 3 MHz gain-bandwidth product, 3 V/µs slew rate, 1 pA input bias current, and maximum input offset voltage of 750 µV. The amplifier provides rail-to-rail input and output behavior and uses CMOS technology in an 8-pin PDIP package. Texas Instruments identifies the OPA704PA as a single, 12 V operational amplifier intended for general-purpose precision signal conditioning.
Where can I download the OPA704PA datasheet PDF?
The official OPA704PA technical information is available through the Texas Instruments OPA704 product page at https://www.ti.com/product/OPA704. That page provides the manufacturer datasheet and ordering information for the OPA704 family, including the PDIP ordering option represented by OPA704PA. Use the pin-description and electrical-characteristics tables from the manufacturer datasheet when assigning PCB signals and checking operating limits.
Where can I find the OPA704PA pinout?
The OPA704PA pin assignment should be taken from the pin-description diagram in the Texas Instruments OPA704 manufacturer datasheet. The device is supplied in an 8-pin PDIP package, but signal names, offset-null pin behavior, supply pins, and no-connect assignments must be checked against that diagram before PCB routing. The product page at https://www.ti.com/product/OPA704 provides access to the authoritative package documentation.
Is the OPA704PA suitable for high-impedance sensors?
The OPA704PA is suitable for high-impedance sensors because its input bias current is specified at 1 pA. That low-current characteristic reduces the voltage error produced when bias current flows through a high source resistance. The amplifier also supports rail-to-rail input operation, which helps preserve signal range in single-supply circuits. PCB cleanliness and guarding remain important because board contamination can introduce leakage much larger than 1 pA.
OPA704PA vs OPA704UA - which should I choose?
OPA704PA and OPA704UA share the same OPA704 performance family, but OPA704PA is specified in an 8-pin PDIP package while OPA704UA uses an 8-pin surface-mount package. OPA704UA can replace OPA704PA only when the PCB footprint is physically changed; it is not a pin-compatible drop-in substitute for a through-hole PDIP footprint. Both options are appropriate for designs that can use the corresponding package.
What is the best drop-in replacement for OPA704PA?
No alternate OPA704PA drop-in replacement can be confirmed from the available cross-reference information. A valid drop-in candidate must use the same 8-pin PDIP footprint, preserve the operational-amplifier pin functions, and remain close to the 3 MHz bandwidth, 3 V/µs slew rate, 12 V supply, 750 µV maximum offset, and 1 pA bias-current characteristics. The OPA704UA is not pin-compatible because its package is surface mount.
Can OPA704UA replace OPA704PA on an existing PCB?
The OPA704UA cannot directly replace an OPA704PA on an existing 8-pin PDIP footprint because the package technology and mounting form differ. The OPA704PA is a through-hole PDIP device, while the OPA704UA is an 8-pin surface-mount option. A board redesign, new footprint, and appropriate assembly changes are therefore required; this is not a drop-in substitution.
When should I choose OPA704PA instead of a higher-bandwidth op amp?
Choose the OPA704PA when a 3 MHz gain-bandwidth product, 3 V/µs slew rate, and exceptionally low 1 pA input bias current meet the circuit requirements without adding unnecessary bandwidth. Its maximum input offset voltage is 750 µV, so systems needing tighter DC accuracy may require calibration or a different amplifier. Higher-bandwidth devices can be preferable when signal-edge fidelity dominates rather than bias-current performance.
Is OPA704PA suitable for a single 12 V supply?
The OPA704PA is identified by Texas Instruments as a single, 12 V operational amplifier with rail-to-rail input and output operation. It is therefore appropriate for single-supply analog systems designed around a 12 V rail. The complete input and output voltage ranges, common-mode limits, and stability conditions must be confirmed in the manufacturer datasheet for the intended supply tolerance and temperature range.
What is the power consumption of OPA704PA?
The Texas Instruments OPA704PA is designed for low-power operation, but its exact quiescent current is not stated in the product summary available for this page. Use the manufacturer datasheet’s electrical-characteristics table to determine supply current at the actual output load and temperature. Power dissipation can then be estimated as supply voltage multiplied by total supply current, including output-current contributions from the load.
How should I design a photodiode amplifier with OPA704PA?
Use the OPA704PA in a transimpedance configuration with the photodiode connected to the inverting input, a feedback resistor establishing current-to-voltage conversion, and a feedback capacitor selected for stability and bandwidth. The amplifier’s 1 pA input bias current limits the DC error introduced by the photodiode path. Keep the input node compact, guard surrounding copper when leakage matters, and verify compensation using the manufacturer’s stability guidance.
Where to buy OPA704PA online?
Use the Request a Quote form on this page to request OPA704PA availability, current commercial terms, and the correct ordering configuration. The target is the 8-pin PDIP package with the PA ordering suffix; confirm that the quotation identifies OPA704PA exactly. Lead time and stock can vary by manufacturing and packaging status, so obtain the current commitment directly through the quote process.
What is the price of OPA704PA?
The current commercial price for OPA704PA depends on quantity, availability, and the confirmed 8-pin PDIP ordering configuration. Use the Request a Quote form on this page for a current quotation rather than relying on a historical catalog amount. Include your required quantity, target ship-to location, and acceptable production quantities so the supplier response reflects the correct supply conditions.
What is the lead time and stock status for OPA704PA?
Current stock and lead time for OPA704PA should be confirmed through the Request a Quote form on this page because availability and production timing can change. The quote request should specify the exact OPA704PA MPN, desired package configuration, annual usage, and target delivery date. Confirming the 8-pin PDIP variant avoids confusion with the surface-mount OPA704UA ordering option.

Dữ liệu tham khảo kỹ thuật cho OPA704PA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the OPA704PA when the design requires an 8-pin PDIP footprint, very low 1 pA input bias current, and moderate 3 MHz bandwidth in a single-supply analog circuit. It is particularly attractive for photodiode, high-impedance sensor, and precision current-measurement front ends where input leakage would distort the signal. Choose a surface-mount OPA704-family option when PCB area and automated assembly are higher priorities, or choose a higher-bandwidth amplifier when edge fidelity and settling dominate. Consider a lower-offset or lower-noise amplifier when the 750 µV maximum offset or unspecified noise figure is insufficient for the required accuracy. Do not approve a replacement based only on similar headline bandwidth: confirm the package, pin functions, supply range, common-mode range, offset, bias current, stability, and temperature performance before production use.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 8-pin PDIP
Brand Texas Instruments
Number of Channels 1 channel
Nominal Supply Voltage 12 V
Gain-Bandwidth Product 3 MHz
Slew Rate 3 V/µs
Input Bias Current 1 pA
Maximum Input Offset Voltage 750 µV
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail

Bảo phân biệt quan trọng

  • Exceptionally low input bias current for precision measurement (vsOPA704UA)
  • Through-hole PCB integration without footprint conversion (vsOPA704UA)
  • Rail-to-rail signal handling with moderate bandwidth (vsOPA704UA)

Ghi chú thiết kế

Keep the OPA704PA input and feedback connections short, particularly on transimpedance and high-impedance sensor circuits. Place the feedback components directly across the amplifier pins, remove PCB leakage paths around sensitive inputs, and use a protective guard where feasible. Because the specified input bias current is only 1 pA, contamination or connector leakage can dominate the error budget even when the amplifier itself performs well.

Do not treat OPA704PA and OPA704UA as pin-compatible alternatives for an existing board. OPA704PA uses an 8-pin PDIP footprint, whereas OPA704UA is an 8-pin surface-mount device. Direct substitution requires a new footprint and assembly process. Also verify the complete common-mode and output-voltage limits against the actual 12 V supply tolerance rather than assuming that rail-to-rail operation permits operation exactly at either rail.

For gain stages operating close to the 3 MHz gain-bandwidth limit, evaluate closed-loop stability with the actual source impedance, load, and compensation capacitor. The 3 V/µs slew rate also limits large-signal response even when the small-signal bandwidth appears adequate. Use the manufacturer datasheet’s recommended application circuits as the starting point, then verify settling and distortion on the assembled PCB with realistic source and load conditions.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is identified for the OPA704PA. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claim is made.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

OPA704PA datasheet OPA704PA pinout OPA704PA datasheet pdf OPA704PA specifications OPA704PA replacement OPA704PA equivalent OPA704PA vs OPA704UA OPA704PA PDIP footprint OPA704PA 3 MHz op amp OPA704PA 1 pA bias current OPA704PA price OPA704PA stock Texas Instruments OPA704PA OPA704PA photodiode amplifier

Các bộ phận và thuật ngữ liên quan

Texas Instruments OPA704PA OPA704 OPA704UA operational amplifier voltage-feedback amplifier amplifier IC analog signal conditioning CMOS operational amplifier rail-to-rail input rail-to-rail output gain-bandwidth product slew rate input bias current input offset voltage single-supply operation 8-pin PDIP through-hole package photodiode transimpedance amplifier precision sensor interface RoHS AEC-Q100
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ