PCM1606E/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments
MPN: PCM1606E/2K ✗ Cuối đờiPCM1606E/2K Tóm tắt
An audio DAC is a mixed-signal semiconductor that reconstructs continuous analog voltage signals from digital audio samples. Within the signal chain, a digital-to-analog converter sits after the processor, decoder, or digital audio source and before the output amplifier and speaker system. The PCM1606E/2K is therefore a special-purpose interface IC within the broader ADC/DAC category, combining digital input, clocking, noise-shaping conversion, analog output, and support circuitry.
The principal features are six DAC channels, 24-bit resolution, operation up to 192 kHz, and an I2S-compatible digital audio interface. Its 20-SSOP package supports compact multichannel designs while exposing separate analog outputs for six channels. The /2K ordering code identifies the manufacturer's specified package, temperature, and lead-free configuration. For new layouts, the pin-description and test-information tables in the manufacturer datasheet should govern track assignment and analog-output routing.
The enhanced multilevel delta-sigma architecture uses noise shaping to move quantization noise away from the audio band. This approach supports high-resolution digital audio reconstruction while maintaining a conventional external-interface and analog-output implementation. Multiple converters operating from common digital data and clock signals reduce the need for separate discrete DACs when a system requires synchronized six-channel playback.
Typical uses include surround-sound receivers, home-theater audio processors, active speaker systems, digital mixing consoles, automotive infotainment units, and professional monitoring equipment. The six-channel architecture is particularly useful when one subsystem must produce synchronized left, right, center, surround, and additional channel outputs without deploying separate converter packages.
Power-supply and ground planning are central to preserving converter performance. Place the decoupling network close to the supply pins, maintain the layout recommended by the manufacturer datasheet, and keep analog output routing away from high-current digital return paths. Verify output filtering and analog gain settings against the intended sampling rate before fixing the audio signal chain.
This page consolidates the PCM1606E/2K package, interface, channel, resolution, and sampling-rate characteristics with practical replacement guidance, comparison information, and PCB-focused design notes to support component selection and board bring-up.
Bộ thay thế dễ dàng lắp đặt cho PCM1606E/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1606E/2K (cùng hình factor và footprint) — khác nhau ở Digital Audio Interface, Package, Number of DAC Channels, Resolution, Signal-to-Noise Ratio.
PCM1606E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1606EG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1681PWP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1606E/2K Tỷ lệ tối đa & tính chất điện
| Device Type | 6-channel audio digital-to-analog converter |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Distributor Maximum Sampling Rate Listing | 200 kHz |
| Number of DAC Channels | 6 channels |
| Digital Audio Interface | I2S |
| Điện áp cung cấp | 5 V |
| Hộp | 20-lead SSOP, 5.30 mm width |
| Kiểu lắp đặt | Surface mount |
| Process Technology | CMOS |
| Integrated Circuit Type | Special-purpose audio DAC |
Hướng dẫn cấu hình chân PCM1606E/2K 20-lead ssop, 5.30 mm width
Cấu hình chân cho PCM1606E/2K (20-lead ssop, 5.30 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1606E/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1606E/2K phù hợp cho 6 Áp dụngs: Home-Theater Audio Receiver, Active Multichannel Speaker System, Digital Mixing Console, Automotive Infotainment Audio, Professional Audio Monitor Controller, Digital Audio Source and Decoder.
Home-Theater Audio Receiver
The PCM1606E/2K is suitable for a home-theater receiver requiring several synchronized analog audio outputs. Its six 24-bit DAC channels can reconstruct up to 192 kHz digital audio received through I2S, reducing the number of separate converter packages required for surround and front-stage channels. Each analog output can feed the receiver’s output-filter and amplifier stages. The 20-SSOP format keeps the converter footprint compact, but the design must preserve short clock and data routes, provide local supply decoupling, and isolate analog outputs from digital return currents. Confirm that the system clock plan, channel mapping, and output-filter requirements are compatible before layout release.
Được đề xuất
Active Multichannel Speaker System
The PCM1606E/2K fits an active speaker controller that must generate multiple synchronized playback channels. Six integrated 24-bit DAC outputs provide analog signals for separate left, right, center, surround, and auxiliary amplification stages, while I2S input allows the converter to operate from a common digital audio source. Operation up to 192 kHz supports high-resolution source material. The implementation should use the manufacturer’s recommended power and grounding topology, preserve analog-output symmetry, and validate output levels before the speaker amplifiers. A multi-rail system also needs sequencing arranged so the converter and downstream amplifiers do not create startup transients.
Được đề xuất
Digital Mixing Console
The PCM1606E/2K can serve as a multichannel output stage in a digital mixing console where the mixer processor supplies synchronized I2S audio. The six DAC channels provide 24-bit conversion at rates up to 192 kHz, allowing the system to feed several monitored outputs without deploying a separate DAC for every channel. Accurate reconstruction depends on clean converter supply voltage, controlled clock jitter, correct digital-data mapping, and analog filtering matched to the design bandwidth. Console designs should also evaluate ground-loop risk when the converter shares a chassis with motor controls, display circuitry, or other switching systems.
Được đề xuất
Automotive Infotainment Audio
The PCM1606E/2K can support multichannel digital audio in an infotainment or vehicle audio architecture where a head unit produces several analog playback channels. Its six-channel, 24-bit DAC and I2S interface suit centralized digital audio distribution, while the 20-SSOP package limits board area. Vehicle environments introduce strict requirements for supply transients, temperature, vibration, and electromagnetic compatibility, so the exact order code must be checked for qualification before adoption. The circuit should use protected, low-impedance supply routing and keep radio-frequency or switching circuitry away from sensitive analog outputs.
Được đề xuất
Professional Audio Monitor Controller
The PCM1606E/2K is applicable to a professional monitor controller requiring several high-resolution analog playback outputs. Six synchronized channels can feed monitor and auxiliary amplifier inputs, while the 24-bit conversion format and 192 kHz maximum sampling rate align with high-resolution playback workflows. Professional monitoring is sensitive to clock jitter, channel-to-channel behavior, and analog noise, so the converter should receive a quiet reference and supply network, and its six outputs should be routed away from digital and switching currents. Validate the complete signal path with the intended output filters and amplifier gains before production.
Được đề xuất
Digital Audio Source and Decoder
The PCM1606E/2K can be used in a digital audio source or decoder that accepts I2S data and requires multiple analog outputs. Six 24-bit channels make it possible to support main, secondary, and auxiliary playback paths from one converter, while the 192 kHz capability accommodates high-rate source formats. The device should sit close to the digital source interface, use controlled clock routing, and connect its analog outputs to appropriate reconstruction filters. If the source equipment also contains video, Ethernet, or USB circuitry, keep those high-speed return currents separated from the analog output region to preserve signal quality.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1606E/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1606E | PCM1606EG4 | PCM1681PWP |
|---|---|---|---|---|
| Package | 20-SSOP | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | 6-channel audio DAC | 6-channel audio DAC | PCM1606E family audio DAC | Audio DAC |
| Digital Audio Interface | I2S | I2S | I2S | I2S-compatible 5 V application context |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V single supply |
| Pin Compatibility | 20-SSOP reference pinout | Same-package family variant; verify exact pinout | Same-package family variant; verify exact pinout | Same 20-SSOP package and pinout for many 5 V I2S applications |
Bảo phân biệt quan trọng
- Six-channel integration reduces the number of separate DAC packages (vsPCM1681PWP)
- High-resolution multichannel conversion in one compact package (vsPCM1606EG4)
- Documented 192 kHz-capable six-channel operation (vsPCM1606E)
Ghi chú thiết kế
Place the PCM1606E/2K supply capacitors immediately adjacent to the supply and ground pins, and route digital data and clock lines away from all six analog outputs. Keep the analog-output traces short, symmetrical, and surrounded by a continuous ground reference when the board stack-up permits. Follow the component placement and layer guidance in the manufacturer datasheet, especially for the SSOP footprint, exposed no-lead dimensions, and copper clearance. A compact arrangement reduces susceptibility to clock coupling and ground-current interference without requiring a redesign of the audio output filters.
Do not substitute a family member solely because its distributor title contains PCM1606E. Confirm the exact suffix, temperature range, lead-free configuration, pin names, clock requirements, and output characteristics against the manufacturer ordering information. PCM1681PWP is specifically described as drop-in compatible for many 5 V I2S PCM1606E applications, but “many applications” does not remove the need for a board-level review. Check digital interface mode, control pins, channel mapping, power sequencing, and analog gain before approving it as a substitute.
Treat the I2S data, master clock, and serial clock as a coherent digital interface and keep their return current within a continuous reference plane. Avoid routing these signals across analog-output regions or between the converter and its output filters. Verify the master-clock relationship and supported sampling rate in the manufacturer timing specifications, then measure clock jitter and channel synchronization on the first article. For six-channel systems, consistent routing length and a quiet reference supply help maintain uniform timing and channel behavior across all outputs.
Thông tin tuân thủ
Compliance and qualification status require confirmation from current manufacturer material-declaration or qualification documentation. The /2K ordering suffix must not be interpreted as proof of RoHS, REACH, AEC-Q100, lead-free, or halogen-free status without that documentation.