PCM1760U-L - 20-Bit Stereo Delta-Sigma ADC | TI
MPN: PCM1760U-L ✓ Hoạt độngPCM1760U-L Tóm tắt
An ADC is a mixed-signal integrated circuit that converts continuously varying analog voltages into numeric values for processing by a microcontroller, DSP, or digital audio system. The PCM1760U-L belongs to the delta-sigma ADC family within the broader analog-to-digital converter and data-converter hierarchies. Its multi-bit enhanced noise-shaping architecture moves much of the quantization-noise shaping into the digital domain, supporting high-resolution audio conversion without requiring a parallel-output interface.
The principal operating characteristics are 20-bit output resolution, two analog input channels, and a 48 kHz sampling rate. The 28-pin SOIC package supports conventional surface-mount assembly and provides separate connections for the two analog inputs, digital data, clocking, and power. Its two's-complement binary output format is compatible with digital audio processors designed to accept sign-extended two's-complement samples.
The PCM1760U-L is intended for digital audio recording, consumer audio equipment, and other stereo signal-acquisition systems. A typical signal path routes balanced or unbalanced analog audio into the two converter inputs, applies suitable analog conditioning, and then connects the digital interface to a digital audio processor or serial interface controller. The 48 kHz rate aligns with the standard CD-audio sampling domain, while 20-bit resolution provides 1,048,576 code levels per channel.
Designers should use the pin-description and typical application circuits in the manufacturer datasheet when assigning inputs, digital interfaces, analog supplies, and grounds. Decoupling should be placed close to the supply pins, analog and digital return currents should remain separated where the layout guidance permits, and unused inputs should be handled according to the recommended circuit rather than left floating without review.
This product page consolidates the confirmed resolution, channel count, sampling rate, package, converter architecture, and ordering details into an engineering-oriented overview. It also provides application guidance, design notes, and drop-in family alternatives for designers who need to evaluate an existing 28-pin SOIC footprint before committing to a board revision.
Bộ thay thế dễ dàng lắp đặt cho PCM1760U-L — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1760U-L (cùng hình factor và footprint) — khác nhau ở Converter Type, Number of Analog Inputs, Number of Terminals.
PCM1760U
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1760U/1K
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1761U
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM1762U
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM1763U
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM1760U-L Tỷ lệ tối đa & tính chất điện
| Converter Type | Delta-sigma ADC |
| Architecture | 1-bit sigma-delta |
| Độ phân giải | 20 bit |
| Number of Analog Inputs | 2 channels |
| Tỷ lệ lấy mẫu | 48 kHz |
| Output Bit Code | Two's-complement binary |
| Package Type | 28-pin SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Number of Terminals | 28 |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Commercial |
Hướng dẫn cấu hình chân PCM1760U-L rectangular
Cấu hình chân cho PCM1760U-L (rectangular gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1760U-L.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1760U-L phù hợp cho 6 Áp dụngs: Stereo Digital Audio Recording, Consumer Audio Equipment, Digital Mixer and Processing Console, Instrument and Measurement Front End, Playback and Monitoring System, Active Speaker and Amplifier Feedback.
Stereo Digital Audio Recording
The PCM1760U-L fits stereo digital-audio recording because it provides two analog input channels, 20-bit conversion, and a 48 kHz sampling rate in a 28-pin SOIC. Each channel can feed the converter through suitable source conditioning before the digital output is read by an audio processor or DSP. The 48 kHz rate matches the conventional CD-audio sampling domain, while 20-bit words provide 1,048,576 numerical levels per channel. Designers should use the manufacturer reference circuit for input biasing, supply decoupling, clock connections, and digital-interface implementation.
Được đề xuất
Consumer Audio Equipment
PCM1760U-L is suitable for consumer audio equipment requiring a compact two-channel, 48 kHz conversion stage. Its 28-pin SOIC package can be placed on a conventional surface-mount PCB, and the 20-bit two's-complement output provides a clear interface for digital audio signal processing. A typical design routes left and right analog signals into the two inputs, supports the converter with local bypass capacitors, and connects its digital interface to the system audio controller. Clock timing, logic levels, and analog ground return must be checked against the manufacturer application circuit.
Được đề xuất
Digital Mixer and Processing Console
The dual-input PCM1760U-L can form the analog acquisition front end of a digital mixer or processing console. Its two channels allow synchronized sampling of stereo sources at 48 kHz, while the 20-bit resolution preserves fine amplitude detail before digital gain, filtering, and mixing operations. The converter's delta-sigma architecture and two's-complement output suit downstream DSP processing. For a console, follow the datasheet layout guidance to keep analog input traces away from high-current digital and clock paths, and verify input full-scale and gain structure before final analog scaling.
Được đề xuất
Instrument and Measurement Front End
PCM1760U-L can be used in a precision audio measurement front end where two measured analog channels must be digitized at 48 kHz. Its 20-bit resolution offers 1,048,576 code levels per channel, which supports detailed capture of low-level waveforms after suitable input conditioning. The two analog inputs can be selected through an external switching or attenuating network, while a microcontroller or DSP performs analysis. For instrumentation, calibrate full-scale voltage, gain, bandwidth, clock source, and digital scaling rather than assuming the converter code range directly equals the original signal range.
Được đề xuất
Playback and Monitoring System
The PCM1760U-L can support playback monitoring, loopback analysis, and signal-validation systems by acquiring two analog channels at 48 kHz with 20-bit resolution. Comparing the acquired channels with the system's digital reference can help identify channel imbalance, clipping, or timing-related errors. The dual-input arrangement reduces the need for separate converters when both channels require synchronous conversion. Designers should account for analog latency, establish a common clock plan, and use the manufacturer timing diagram when aligning captured samples with digital playback events.
Được đề xuất
Active Speaker and Amplifier Feedback
PCM1760U-L is applicable to active-speaker or power-amplifier feedback designs that need to monitor two stereo channels digitally. Sampling both inputs at 48 kHz permits a controller to compare left and right behavior, support protection logic, or expose status information to a host processor. The converter's 20-bit resolution can retain small changes within the conditioned input range. The analog path must remain independent from the high-current amplifier output stage, and the feedback network should keep signals within the converter's permitted input range under worst-case startup and fault conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1760U-L — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1760U | PCM1760U/1K | PCM1761U | PCM1762U | PCM1763U |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 20 bit | 20 bit | 20 bit | 20 bit | 20 bit | 20 bit |
| Number of Analog Inputs | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Sampling Rate | 48 kHz | 48 kHz | 48 kHz | 48 kHz | 48 kHz | 48 kHz |
| Converter Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Sigma-Delta Implementation | 1-bit | 1-bit | 1-bit | 1-bit | 1-bit | 1-bit |
| Output Bit Code | Two's-complement binary | Two's-complement binary | Two's-complement binary | Two's-complement binary | Two's-complement binary | Two's-complement binary |
| Terminal Count | 28 | 28 | 28 | 28 | 28 | 28 |
Bảo phân biệt quan trọng
- Matches the confirmed PCM1760U core configuration (vsPCM1760U)
- Preserves the established family architecture (vsPCM1761U)
- Suited to conventional stereo audio acquisition (vsPCM1762U)
Ghi chú thiết kế
Use the manufacturer reference layout as the basis for the 28-pin SOIC footprint and place bypass components close to their associated supply pins. Preserve a direct return path from each bypass capacitor to the relevant ground connection. Route the two analog inputs away from digital clock and data lines, particularly where high-impedance source nodes are used.
Treat the clock connection as a critical signal and follow the datasheet timing requirements for source impedance, routing, and grounding. Avoid adding long stubs or test-point structures to clock and digital-data nets. Because the converter uses a 48 kHz sampling rate, verify the complete system clock plan rather than assuming that nominal clock frequency alone guarantees valid data capture.
Do not infer full-scale input voltage, supply limits, digital logic levels, or individual pin functions from the family name. These values can vary by ordering suffix and must be taken from the manufacturer table for the exact MPN. Also verify the output coding, system clock ratio, and data alignment before replacing a converter in an existing 28-SOIC design.
Thông tin tuân thủ
No explicit environmental or automotive qualification declarations were identified for PCM1760U-L. The confirmed device is a commercial-grade 28-pin SOIC audio ADC.