PCM56UG4 - 16-Bit Audio DAC | Texas Instruments | 16-SOIC
MPN: PCM56UG4 ✓ Hoạt độngPCM56UG4 Tóm tắt
A digital-to-analog converter is a signal-conversion IC that transforms digital PCM data into a continuously variable analog voltage or current. The PCM56UG4 belongs to the DAC family within the broader ADC/DAC and data-converter hierarchy. Its serial interface reduces the number of parallel data lines required, making it suitable for compact audio systems where board area and signal routing are important. The 16-SOIC package is also compatible with conventional surface-mount assembly and tube packaging.
The verified data highlights 96 dB dynamic range and maximum total harmonic distortion values of -92 dB at full-scale input and -74 dB at -20 dB input for the K-grade device. These figures make the part relevant to precision audio paths where distortion and noise can affect perceived signal quality. The converter is factory trimmed and tested for critical specifications, according to the available manufacturer datasheet material.
The PCM56UG4 uses a factory-trimmed ladder and scaling network with matched analog circuitry. The manufacturer material explains that conversion errors can arise from linearity, matching and tracking behavior, supply rejection, and reference errors. This makes careful power-supply design, grounding, and output-stage implementation important for achieving the rated performance in a finished audio product.
Typical applications include digital mixing consoles, professional audio interfaces, audio recording equipment, digital test and measurement systems, and signal-generation equipment. The device can be used where a 16-bit PCM stream must be converted into an analog audio signal while preserving low distortion and adequate dynamic range.
Designers should provide clean, symmetrical supply rails and follow the manufacturer’s recommended input, output, and decoupling arrangements. The dual supply requirement must be checked against the target system’s analog rails, while the output network should be designed for the intended load and signal level. The PCM56UG4 should not be selected solely by package and bit depth; interface timing, output amplitude, settling behavior, and system-level noise must also be verified.
Bộ thay thế dễ dàng lắp đặt cho PCM56UG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM56UG4 (cùng hình factor và footprint) — khác nhau ở Package, Supply Voltage, Data Interface, External Components, Terminal Count.
PCM56U/1KG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM56U
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM56UG4 Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit serial-input audio digital-to-analog converter |
| Độ phân giải | 16 bit |
| Data Interface | Serial |
| Number of Channels | 1 channel |
| Supply Type | Dual ± supply |
| Điện áp cung cấp | ±4.75 V to ±13.2 V |
| Dynamic Range | 96 dB |
| Total Harmonic Distortion at Full Scale | -92 dB maximum |
| Total Harmonic Distortion at -20 dB Input | -74 dB maximum |
| Settling Time | 1.5 us nominal |
| Nhiệt độ hoạt động | -25 °C to +70 °C |
| Hộp | 16-SOIC, 0.295 inch / 7.50 mm width |
| Terminal Count | 16 |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tube |
| Temperature Grade | Commercial |
| External Components | No external components required |
| Factory Trimming | Factory trimmed and tested |
Hướng dẫn cấu hình chân PCM56UG4 16-soic, 0.295 inch / 7.50 mm width
Cấu hình chân cho PCM56UG4 (16-soic, 0.295 inch / 7.50 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM56UG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM56UG4 phù hợp cho 6 Áp dụngs: Professional Audio Mixing Console, Digital Audio Recording Interface, Audio Signal Generator, Data-Acquisition Instrumentation, Digital Test and Measurement System, Industrial Audio Control Panel.
Professional Audio Mixing Console
The PCM56UG4 fits a professional audio mixing console because its 16-bit serial PCM input converts digital channel data into an analog signal without requiring a parallel data bus. The 96 dB dynamic range provides a useful foundation for clean audio reconstruction, while the -92 dB maximum full-scale THD figure is relevant to low-distortion output paths. The 16-SOIC package supports compact surface-mount routing, and the 1.5 us nominal settling time can support standard audio update rates. Designers should still budget for clean dual rails, low-jitter clocking, a suitable reconstruction filter, and an output stage matched to the console’s load.
Được đề xuất
Digital Audio Recording Interface
PCM56UG4 is appropriate for a digital audio recording interface that accepts serial PCM data and requires an analog monitor output. Its 16-bit resolution preserves the nominal source word length, and the verified 96 dB dynamic-range figure supports a low-noise conversion stage. The dual ±4.75 V to ±13.2 V operating range permits integration around balanced or bipolar analog circuitry. Because the converter itself does not remove clock-jitter, supply-noise, or reconstruction-filter errors, the interface should use a stable clock, symmetrical low-noise rails, controlled grounding, and an optimized output network.
Được đề xuất
Audio Signal Generator
The PCM56UG4 can serve as the digital-to-analog stage of an audio signal generator when the system generates PCM waveforms at a suitable update rate. Its 16-bit serial interface reduces wiring complexity, while its 1.5 us nominal settling time helps support controlled waveform transitions. The 96 dB dynamic range and the -74 dB maximum distortion specification at -20 dB input are useful considerations for low-level test signals. For precision generation, clock jitter, reference accuracy, reconstruction filtering, and output attenuation must be evaluated separately because converter specifications alone do not establish total signal accuracy.
Được đề xuất
Data-Acquisition Instrumentation
PCM56UG4 is suitable for instrumentation that receives digital PCM data and needs an analog voltage for downstream measurement or excitation. The 16-bit resolution provides a direct match for many digital acquisition paths, while the 96 dB dynamic range provides useful signal headroom. Its 1.5 us nominal settling time and serial interface are advantageous when minimizing parallel routing on a densely populated board. The design must account for the dual-supply requirement and use an output buffer with suitable input impedance, bandwidth, noise, and settling behavior for the intended measurement bandwidth.
Được đề xuất
Digital Test and Measurement System
The PCM56UG4 can be used inside a digital test and measurement system as the bridge between a digital waveform source and an analog test point. Its serial PCM input and 16-bit resolution support economical connection to digital processors, and the 96 dB dynamic range helps maintain signal integrity over the conversion stage. The commercial -25 °C to +70 °C operating range covers typical indoor laboratory and production environments. For higher precision, engineers should characterize clock and power-supply noise and verify that the external reconstruction filter and output attenuator meet the required frequency and amplitude accuracy.
Được đề xuất
Industrial Audio Control Panel
PCM56UG4 fits an industrial audio control panel that receives digital audio commands or notification tones and produces an analog line-level signal. The 16-bit PCM interface allows integration with a common serial audio bus, while the -92 dB maximum full-scale THD supports intelligible, low-distortion playback. The 16-SOIC package is practical for automated surface-mount assembly, and the tube packaging shown in the verified data can support prototype or manual-assembly workflows. Production designs should verify electromagnetic-emissions behavior, isolate digital return currents from the analog output, and select an output connector and protection network appropriate to the enclosure and cable environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM56UG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM56U/1KG4 | PCM56U |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Resolution | 16 bit | 16 bit | 16 bit |
| Data Interface | Serial | Serial | Serial |
Bảo phân biệt quan trọng
- Factory-trimmed 16-bit conversion path (vsPCM56U)
- Documented 96 dB dynamic range (vsPCM56U/1KG4)
- Commercial 16-SOIC implementation (vsPCM56U/1KG4)
Ghi chú thiết kế
Use clean, symmetrical positive and negative supply rails because PCM56UG4 is specified for dual ±4.75 V to ±13.2 V operation. Place local decoupling capacitors close to the supply pins and keep analog return currents separate from digital switching paths. Confirm rail startup order and grounding so the converter is not exposed to an out-of-range intermediate voltage. Supply noise, regulator rejection, and ripple must be evaluated against the application’s full-scale audio requirement rather than only the converter’s stated dynamic range.
Route the serial data and clock traces away from the analog output and power-supply nodes, and terminate the clock according to the interface timing requirements. Keep the DAC output path short, use a ground reference that is continuous beneath the analog section, and place any reconstruction filter close enough to the converter to minimize parasitic pickup. The 16-SOIC footprint requires careful escape routing, but the compact package can still provide a short analog path when component and ground placement are prioritized.
Do not treat 16-bit resolution as a guarantee of 16-bit system accuracy. Clock jitter, reference error, reconstruction-filter distortion, output-loading effects, and supply noise can dominate the final performance. In addition, the verified listing identifies tube packaging, so a design intended for high-volume reel-fed assembly should confirm the production orderable suffix before releasing the PCB and assembly documents.
Thông tin tuân thủ
The supplied verified data identifies PCM56UG4 as a commercial-grade Texas Instruments audio DAC but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than assumed.
