PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom
MPN: PEX8624-BB50RBCF ✓ Hoạt độngPEX8624-BB50RBCF Tóm tắt
A PCI Express switch belongs to the interface-controller hierarchy and manages transaction routing between a root complex or upstream port and multiple downstream endpoints. Within the broader semiconductor category, the PEX8624 combines a PCIe switch fabric, port-level interface functions, configuration handling, reference-clock distribution, and power-management features in one high-ball-count package. This integration reduces the number of discrete interface devices required in complex embedded platforms.
The most prominent operating characteristics are its 24 PCIe lanes, six ports, and PCIe Gen 2 data rate of 5.0 GT/s. The 324-ball FCBGA package supports dense high-speed routing on multilayer PCBs, while its commercial temperature grade targets equipment operating within commercial environmental limits. The part is categorized as a PCI bus controller and PCIe interface IC rather than a conventional analog switch or digital logic device.
The PEX8624 architecture is intended for systems requiring more connectivity than a single root port can directly provide. Each supported link must comply with PCIe signal-integrity, reference-clock, configuration, reset, and power-sequencing requirements. Designers must preserve the High-Speed differential routing rules, provide suitable decoupling, and verify connector, cable, and endpoint compatibility across the complete system.
Typical uses include industrial host systems, external storage controllers, test equipment, embedded computing platforms, and networked appliances that need multiple PCIe endpoints behind one host interface. Its 24-lane capacity is useful when several devices, such as NVMe controllers, Ethernet adapters, capture cards, or acceleration modules, share a chassis. Exact lane allocation and usable bandwidth depend on port configuration and the physical topology implemented on the motherboard.
A critical design consideration is that the 19 mm by 19 mm FCBGA requires a dense multilayer board with short High-Speed traces, matched reference planes, and uninterrupted return paths. The layout should follow the Broadcom reference design and data book for ball assignment, reference-clock routing, power configuration, reset behavior, and connector pin mapping before schematic capture is finalized.
This page combines the core device identity, package characteristics, application guidance, pricing workflow, and family-level replacement information into a practical engineering reference. It also identifies which electrical, timing, thermal, and pin-level details still require direct confirmation from the manufacturer data book before layout release or production qualification.
Bộ thay thế dễ dàng lắp đặt cho PEX8624-BB50RBCF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PEX8624-BB50RBCF (cùng hình factor và footprint) — khác nhau ở Temperature Grade.
PEX8624-BB50RBCG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PEX8624-BB50RBIF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PEX8624-BB50BCF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PEX8624-AA50RBCG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PEX8624-AB50RBCG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PEX8624-BB50RBCF Tỷ lệ tối đa & tính chất điện
| Device Type | PCI Express Gen 2 switch IC |
| PCI Express Generation | Gen 2 |
| PCI Express Data Rate | 5.0 GT/s |
| Lane Count | 24 lanes |
| Port Count | 6 ports |
| Hộp | 324-ball FCBGA, 19 mm x 19 mm |
| Ball Count | 324 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| Package Code | HBGA |
| Temperature Grade | Commercial |
| Product Category | PCI bus controller |
Hướng dẫn cấu hình chân PEX8624-BB50RBCF hbga
Cấu hình chân cho PEX8624-BB50RBCF (hbga gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PEX8624-BB50RBCF.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PEX8624-BB50RBCF phù hợp cho 6 Áp dụngs: Industrial PCIe Control System, NVMe Storage Enclosure, PCIe Accelerator Platform, Test and Measurement Chassis, Embedded Network Appliance, External PCIe Expansion.
Industrial PCIe Control System
The PEX8624-BB50RBCF fits industrial control and automation systems that place multiple PCIe endpoint cards behind one host connection. Its 24 lanes and six ports allow controllers, I/O adapters, motion interfaces, and communications hardware to share a switching fabric without requiring a separate root complex for every endpoint. Operating at PCIe Gen 2, each lane supports a 5.0 GT/s data rate, which is appropriate for many machine-control, data-acquisition, and embedded vision workloads. The implementation should use the Broadcom reference topology for reference-clock distribution, reset, power sequencing, and endpoint configuration. PCB designers must preserve controlled-impedance differential routing for all enabled lanes and provide local decoupling across the 324-ball FCBGA power grid.
Được đề xuất
NVMe Storage Enclosure
The PEX8624-BB50RBCF is suitable for storage enclosures that require several NVMe PCIe endpoints to communicate through a common host controller. Six switch ports and 24 lanes provide enough connectivity for multiple storage modules while maintaining the 5.0 GT/s Gen 2 rate defined for the device. This makes the switch useful in industrial storage appliances and legacy PCIe expansion systems rather than systems that require newer generation link rates. Storage firmware must allocate the correct lanes to each endpoint and coordinate reset, reference-clock, and power-up behavior. The board layout should use short matched routes from the 19 mm by 19 mm FCBGA to connectors or storage modules while maintaining continuous reference planes beneath the high-speed links.
Được đề xuất
PCIe Accelerator Platform
The PEX8624-BB50RBCF can support accelerator platforms in which multiple PCIe cards require peer routing or aggregation through a common switching fabric. The 24-lane capacity and six-port configuration allow engineers to balance lane widths according to the accelerator workload while retaining the 5.0 GT/s Gen 2 interface rate. Candidate systems include industrial vision, signal-processing, and specialized compute appliances. The switch does not independently accelerate data processing, so application performance still depends on the endpoint devices, memory subsystem, and host software. Configuration planning must account for supported port widths, downstream routing, clock architecture, and reset behavior. Board implementation should follow the family reference design closely because the 324-ball FCBGA presents demanding escape-routing and power-distribution requirements.
Được đề xuất
Test and Measurement Chassis
The PEX8624-BB50RBCF is appropriate for test and measurement equipment that combines several PCIe analysis, acquisition, or communication cards. Six ports and 24 lanes provide a flexible way to connect instrumentation endpoints while routing them through a Gen 2 switch fabric operating at 5.0 GT/s per lane. Engineers can use this arrangement to centralize trigger, synchronization, and management functions without relying on numerous direct root-port connections. The design should isolate high-speed differential routes from noisy switching supplies and analog sections, while maintaining the impedance and return-path geometry required by the Broadcom data book. Reference-clock and reset distribution must be designed according to the selected port configuration, and thermal performance should be checked against the commercial environmental requirements of the finished instrument.
Được đề xuất
Embedded Network Appliance
The PEX8624-BB50RBCF fits embedded network appliances that need to add PCIe Ethernet, storage, or security accelerators while retaining a compact system architecture. The six-port switch gives designers up to 24 lanes of Gen 2 connectivity at 5.0 GT/s, allowing several endpoint functions to be integrated behind one upstream interface. This topology can simplify enclosure wiring and make endpoint ordering more flexible compared with a fixed multi-root-port design. Correct implementation depends on supported lane widths, endpoint ordering, configuration-space access, and coordinated startup. The 324-ball FCBGA requires a multilayer PCB with dense via arrays and carefully placed decoupling. Signal-integrity validation should cover insertion loss, crosstalk, reference-clock quality, and compliance at the selected PCIe generation.
Được đề xuất
External PCIe Expansion
The PEX8624-BB50RBCF can support external PCIe expansion systems that need to fan out several cards through a common switching stage. Its 24 lanes and six ports provide a practical foundation for external enclosures carrying data-acquisition, graphics, storage, or communications cards over PCIe links suitable for Gen 2 operation. The switch should be paired with connectors and cable assemblies whose loss and impedance characteristics preserve the 5.0 GT/s interface. Designers must include suitable protection, reference-clock routing, hot-plug behavior where required, and power sequencing for downstream devices. The 19 mm by 19 mm FCBGA should be placed with short escape routes and a symmetrical power-distribution network, while the reference design should be used to validate connector pin assignments and auxiliary signals.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PEX8624-BB50RBCF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PEX8624-BB50RBCG | PEX8624-BB50RBIF | PEX8624-BB50BCF | PEX8624-AA50RBCG | PEX8624-AB50RBCG |
|---|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 324-FCBGA (19x19) | 324-FCBGA (19x19) | 324-BGA (19x19) | 324-FCBGA (19x19) | 324-FCBGA (19x19) | 324-FCBGA (19x19) |
| PCI Express Generation | Gen 2 | Gen 2 | Gen 2 | Gen 2 | Gen 2 | Gen 2 |
| Lane Count | 24 lanes | 24 lanes | 24 lanes | 24 lanes | 24 lanes | 24 lanes |
| Port Count | 6 ports | 6 ports | 6 ports | 6 ports | 6 ports | 6 ports |
| Maximum Data Rate | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s |
| Terminal Count | 324 balls | 324 balls | 324 balls | 324 balls | 324 balls | 324 balls |
| PCIe Interface Function | 24-lane, six-port PCIe Gen 2 switch | 24-lane, six-port PCIe Gen 2 switch | 24-lane, six-port PCIe Gen 2 switch | 24-lane, six-port PCIe Gen 2 switch | 24-lane, six-port PCIe Gen 2 switch | 24-lane, six-port PCIe Gen 2 switch |
Bảo phân biệt quan trọng
- Broad 24-lane PCIe switching capacity (vsPEX8624-BB50RBCG)
- Six-port Gen 2 fabric in a 324-ball package (vsPEX8624-BB50RBIF)
- Exact BB-series ordering configuration (vsPEX8624-AA50RBCG)
- Multi-endpoint integration without multiple direct root ports (vsPEX8624-AB50RBCG)
Ghi chú thiết kế
Treat every enabled PCIe lane as a controlled-impedance differential channel with continuous reference planes and minimized stub effects. The 324-ball FCBGA requires short escape routes and a multilayer stack-up capable of supporting the family reference design. Avoid splitting planes beneath High-Speed pairs, and validate insertion loss, return loss, and crosstalk with the intended connector, cable, and endpoint loading.
Distribute all supply and ground balls according to the Broadcom PEX 8624 reference design, placing local high-frequency decoupling close to the FCBGA and providing low-impedance power and ground planes through the package area. Coordinate power sequencing with endpoint devices, peripheral hot-plug circuitry, and reset behavior. Check the complete board for simultaneous switching activity and regulator headroom under the selected port configuration.
Reference-clock and reset distribution must follow the topology for the selected port configuration because clock jitter, fanout, skew, and return paths can affect the 5.0 GT/s PCIe interface. Use low-jitter sources where required, keep clock routes away from noisy switching nodes, and maintain continuous return paths. Validate the final board with endpoint and connector options that will be used in production.
Do not treat a PEX 8624 suffix change as automatically equivalent. Confirm the exact ordering code, package dimensions, ball map, temperature grade, lead finish, port configuration, and auxiliary functions before changing a released design. The similar G, I, AA, and AB variants can appear equivalent in abbreviated descriptions even when procurement or configuration details differ.
Thông tin tuân thủ
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. AEC-Q100 is not applicable to this commercial PCI Express interface controller.