Broadcom

PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom

MPN: PEX8624-BB50RBIF ✓ Hoạt động
324-FCBGA Package
MOQ: 1 |

PEX8624-BB50RBIF Tóm tắt

Broadcom PEX8624-BB50RBIF is a 24-lane, six-port PCI Express Gen 2 switch operating at 5.0 GT/s, packaged in a 324-FCBGA square ball grid array measuring 19 x 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving the five-gigatransfers-per-second performance of a Gen 2 endpoint or host interface.

A PCI Express switch is a multiport interface IC that connects one upstream host-facing port to multiple downstream ports. Within the PCI Express hierarchy, the PEX8624 belongs to the bridge and switch class of system interconnect devices. It routes ordered transaction layers between a root complex or another switch and attached endpoint devices, allowing storage, networking, accelerator, and capture cards to share a host PCIe slot.

The device provides 24 PCI Express lanes, six switch ports, and a 5.0 GT/s data rate. Its 324-FCBGA package uses a square 19 x 19 mm outline and a fine-pitch ball-grid layout. The high pin count reflects the simultaneous assignment of lane transmitters and receivers, auxiliary signaling, reference-clock connections, power rails, control interfaces, and configuration pins required by a multiport PCIe switch.

PEX8624-BB50RBIF is intended for Gen 2 designs rather than higher-speed Gen 3 or Gen 4 fabrics. At 5.0 GT/s, each lane carries one bit per transfer cycle before line coding and protocol overhead are considered. The six-port topology gives system architects a way to consolidate several PCIe endpoint connections behind a common upstream interface while maintaining deterministic peer-to-peer routing support.

Typical uses include PCIe expansion systems, industrial data-acquisition chassis, high-bandwidth network appliances, external storage controllers, test and measurement platforms, and GPU or FPGA accelerator systems. In these applications, the switch can reduce host-controller scarcity and provide a structured path between multiple endpoint types without redesigning the mechanical enclosure around several discrete adapters.

PCB implementation is the dominant engineering consideration. A 324-FCBGA device requires a fine-pitch land pattern, multilayer PCB construction, controlled impedance routing, solid reference planes, and careful power and ground-plane distribution. The differential PCIe pairs should be routed as length-matched transmission lines with minimal stubs and layer transitions, while the reference clock and PERST# sequencing require deliberate system-level planning.

This page consolidates the confirmed lane count, port count, transfer rate, package outline, sourcing constraints, and practical implementation considerations for PEX8624-BB50RBIF. For a new layout, use the Broadcom PEX8624 datasheet and reference design to validate the complete ball map, power architecture, clock topology, connector assignments, and PCIe training sequence before releasing fabrication files.

Bộ thay thế dễ dàng lắp đặt cho PEX8624-BB50RBIF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PEX8624-BB50RBIF (cùng hình factor và footprint) — khác nhau ở Temperature Grade.

Broadcom
Temperature Grade: Commercial
So sánh với PEX8624-BB50RBIF →

PEX8624-BB50RBI-F

✅ Drop-In
📦 324-FCBGA (19 x 19 mm)
Same documented 24-lane, 6-port, Gen 2 switch configuration and RBI-family package arrangement; the ordering-code spacing differs by 0% in the listed functional parameters.

📋 Tham chiếu thay thế (không có trong danh mục)

PEX8624-BB50RBI-G

✅ Drop-In
📦 324-FCBGA (19 x 19 mm)
Same documented 24-lane, 6-port, Gen 2, 5.0 GT/s configuration and 324-FCBGA 19 x 19 mm package; the G ordering suffix may change revision or lifecycle conditions.

📋 Tham chiếu thay thế (không có trong danh mục)

PEX8624-BB50RBIF Tỷ lệ tối đa & tính chất điện

Product Type PCI Express switch IC
PCI Express Generation Gen 2
Maximum Data Rate 5.0 GT/s
PCI Express Lane Count 24 lanes
Switch Port Count 6 ports
Package Type 324-FCBGA
Package Body Size 19 x 19 mm
Package Shape Square
Terminal Form Ball
Number of Terminals 324 balls
Kiểu lắp đặt Surface mount
Temperature Grade Industrial

Hướng dẫn cấu hình chân PEX8624-BB50RBIF square

Cấu hình chân cho PEX8624-BB50RBIF (square gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân square cho PEX8624-BB50RBIF

Không có dữ liệu chân cụ thể sẵn có cho PEX8624-BB50RBIF.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PEX8624-BB50RBIF phù hợp cho 6 Áp dụngs: Industrial Data-Acquisition Systems, PCIe Expansion Enclosures, Network Appliances, External Storage Systems, GPU and FPGA Accelerator Systems, Test and Measurement Platforms.

🏭

Industrial Data-Acquisition Systems

The PEX8624-BB50RBIF fits industrial data-acquisition systems that must combine several PCIe acquisition, processing, and communication cards behind one host interface. Its 24 lanes can be distributed across six switch ports, while the 5.0 GT/s Gen 2 rate provides a defined performance ceiling for each active link. The six-port topology helps equipment designers avoid installing multiple root-complex resources when synchronized measurement or control traffic must reach several endpoints. The principal engineering cost is PCB complexity: a 324-FCBGA package requires fine-pitch routing, multilayer power distribution, and controlled-impedance differential pairs. Use the Broadcom reference layout to allocate lane widths, configure downstream links, and preserve clock and reset integrity.

🖥️

PCIe Expansion Enclosures

The PEX8624-BB50RBIF is appropriate for a PCIe expansion enclosure that exposes multiple connector slots to a host computer. Six downstream ports can support accelerator, storage, network, and test cards, provided the 24 available lanes are distributed according to the intended link widths. At a maximum 5.0 GT/s, the device keeps the enclosure within PCIe Gen 2 capabilities and supports a more consolidated topology than separate host adapters. Thermal and mechanical design remain essential because a dense switching IC and several high-power endpoint cards can concentrate heat inside a compact enclosure. The 19 x 19 mm FCBGA also requires a multilayer motherboard with careful ball-escape routing and a ground-reference plane beneath the device.

🌐

Network Appliances

The PEX8624-BB50RBIF can support a network appliance that needs several PCIe-connection paths rather than a single endpoint link. Possible downstream functions include Ethernet controllers, NVMe storage, security or compression accelerators, and dedicated processing engines. The switch's 24-lane capacity allows a designer to balance link widths against endpoint count, avoiding the inefficiency of assigning every card a full x16 connection when only a subset requires that bandwidth. Because the device operates at PCIe Gen 2, designs must avoid assuming Gen 3 throughput from the shared host link. Thermal planning, reference-clock distribution, and deterministic PCIe reset sequencing should be developed alongside the PCB layout.

🖥️

External Storage Systems

The PEX8624-BB50RBIF is well suited to storage appliances that aggregate multiple PCIe devices, such as NVMe controllers, RAID interface cards, or cache accelerators. Its six-port structure can reduce dependence on scarce host PCIe slots, while 24 lanes provide a practical pool for combining narrower storage links with one wider accelerator link. The switch does not change the underlying Gen 2 limit of 5.0 GT/s, so storage performance must be modeled per lane and per port. Firmware should also account for power-state transitions and coordinated reset behavior when multiple storage paths start or stop. The switch IC's high pin count makes uninterrupted power, reference clock, and ground distribution central to maintaining reliable link training.

⚡

GPU and FPGA Accelerator Systems

The PEX8624-BB50RBIF can be used in systems that connect FPGA-based processing modules or accelerator cards through PCIe. Twenty-four lanes are sufficient to combine several x4 or x8 endpoint links, allowing a host processor to access multiple isolated accelerators without assigning a dedicated root port to every board. The 5.0 GT/s Gen 2 ceiling is important when sizing data paths: sustained transfers must remain within the available per-lane bandwidth after protocol overhead. Accelerator systems may also create substantial simultaneous power and thermal loads, so the switch should not be treated as an isolated low-power interface IC. Signal-integrity work should focus on matched differential routing, solid plane returns, and clock jitter margins.

🔧

Test and Measurement Platforms

The PEX8624-BB50RBIF fits modular test and measurement platforms that connect acquisition engines, signal-processing boards, communication modules, and storage to a single host. Six ports provide a structured PCIe topology while the 24-lane budget permits flexible allocation among instruments with different bandwidth requirements. This arrangement can simplify chassis backplane design compared with assigning every module a separate host controller. A Gen 2 implementation remains appropriate when instrument data rates are well below the 5.0 GT/s per-lane ceiling and deterministic lane sharing is acceptable. The design must still preserve training margins through lossless transitions, controlled reference-clock distribution, and careful reset sequencing, while accounting for heat generated by the switch and adjacent instrumentation modules.

What is the PEX8624-BB50RBIF?
The PEX8624-BB50RBIF is a Broadcom PCI Express Gen 2 switch IC with 24 lanes, six ports, a 5.0 GT/s data rate, and a 324-FCBGA package. According to the Broadcom PEX8624 product documentation, it is designed to route PCI Express traffic between an upstream host or root-complex connection and multiple downstream endpoint devices. Its six-port architecture helps consolidate several PCI Express functions behind one host-facing interface.
How many PCI Express lanes and ports does PEX8624-BB50RBIF have?
The PEX8624-BB50RBIF provides 24 PCI Express lanes across six switch ports. Broadcom listing data identifies it as a 24-lane, six-port Gen 2 switch, while the related product description confirms a maximum data rate of 5.0 GT/s. Because the total lane count is distributed among six ports, a practical board design must assign lanes and configure the downstream links according to the Broadcom reference design rather than assuming that every port must operate with four lanes.
What package does PEX8624-BB50RBIF use?
The PEX8624-BB50RBIF uses a 324-FCBGA package with a square 19 x 19 mm body. The component listing identifies 324 ball terminals, and the related PEX8624-BB50RBI-G listing uses the same 324-FCBGA, 19 x 19 mm package designation. Such a large, fine-pitch package requires multilayer PCB construction and a manufacturer-qualified footprint with controlled impedance, via-in-pad or fanout considerations, and dense power delivery.
Where can I download the PEX8624-BB50RBIF datasheet?
The PEX8624-BB50RBIF datasheet can be located through the Broadcom PEX8624 documentation listed on the product datasheet page. The indexed manufacturer-family PDF and the PEX8624-BB50BIF datasheet page provide the appropriate starting points for electrical characteristics, ball assignments, register definitions, and reference circuitry. Before schematic release, confirm that the document revision and ordering-code table correspond specifically to PEX8624-BB50RBIF.
Where can I find the PEX8624-BB50RBIF pinout?
The PEX8624-BB50RBIF pinout is represented by its 324-ball FCBGA assignment and must be taken from the Broadcom PEX8624 package drawing and pin-description table. A text listing confirms 324 terminals and a square BGA package, but it does not provide a trustworthy ball-by-ball mapping. Use the manufacturer datasheet when assigning power, ground, PCIe differential pairs, auxiliary signals, reference clock, reset, and configuration pins on the PCB.
Is the PEX8624-BB50RBIF compatible with PCIe Gen 1 and Gen 2 systems?
The PEX8624-BB50RBIF is identified as a PCI Express Gen 2 switch operating at 5.0 GT/s. Gen 1 and Gen 2 links normally negotiate their supported operating speed automatically, subject to the complete device and system design. The switch should not be assumed to support Gen 3 or Gen 4 operation because its specified generation is Gen 2; confirm the host, endpoints, connector, retimer, and signal-integrity design for the intended link speed.
What is the best use for the PEX8624-BB50RBIF six-port architecture?
The PEX8624-BB50RBIF is best suited to systems that need several PCIe endpoints behind one host-facing connection. Six ports can serve storage, networking, acquisition, accelerator, or test cards when the required lane allocation matches the switch configuration. Because the 24 lanes are shared across the topology, the correct design choice depends on per-port width and the number of simultaneous active links, not merely the total number of connectors.
Where can I buy PEX8624-BB50RBIF?
Use the Request a Quote form on this page to request PEX8624-BB50RBIF availability, current commercial terms, and lead time. The form allows the requested quantity, target package suffix, and delivery requirements to be communicated without relying on a stale catalog figure. For a production design, request the exact ordering code PEX8624-BB50RBIF and confirm that the quoted units use the required 324-FCBGA configuration.
What is the price of PEX8624-BB50RBIF?
The current commercial price for PEX8624-BB50RBIF should be obtained through the Request a Quote form on this page. Quote-based sourcing is appropriate because availability and pricing can change with quantity, package allocation, and market conditions. Include your planned order quantities and production cadence in the request so the supplier can confirm the applicable supply window and any volume-break structure for the exact MPN.
What is the lead time and stock status for PEX8624-BB50RBIF?
Current stock and lead time for PEX8624-BB50RBIF should be confirmed through the Request a Quote form on this page. Submit the required quantity, target date, and acceptable packaging details with the inquiry. For new production programs, request enough schedule information to cover component allocation, PCB assembly, system test, and contingency inventory rather than relying only on the component delivery interval.
Is PEX8624-BB50RBIF in stock?
Stock status for PEX8624-BB50RBIF must be checked through the Request a Quote form on this page. Provide the required quantity and delivery schedule so the response reflects the exact Broadcom ordering code and its 324-FCBGA package. Avoid treating a listing for a related PEX8624-BB50RBI-G variant as proof of stock for the RBIF suffix, because different ordering suffixes can have separate allocation and lifecycle treatment.
PEX8624-BB50RBIF vs PEX8624-BB50RBI-G - which is better?
Both PEX8624-BB50RBIF and PEX8624-BB50RBI-G are identified as 24-lane, six-port PCIe Gen 2 switches, and both use the 324-FCBGA 19 x 19 mm package. Their key distinction is the ordering suffix, which may encode a different qualification, revision, or lifecycle state. PEX8624-BB50RBIF is preferable when its exact ordering information matches the design; use the G variant only after confirming device-revision, temperature, qualification, and lifecycle requirements against the current Broadcom documentation.
What is the difference between PEX8624-BB50RBIF and PEX8624-BB50RBI-F?
PEX8624-BB50RBIF and PEX8624-BB50RBI-F appear to represent the same Broadcom ordering code expressed with different spacing, while both identify a 24-lane, six-port PCIe Gen 2 switch. The indexed 324-FCBGA package data is associated with the RBI family, but PCB sourcing must use one normalized manufacturer MPN to avoid creating separate BOM lines. Confirm the ordering-information table before releasing the exact MPN to procurement.
What can replace PEX8624-BB50RBIF?
The closest documented drop-in candidate is PEX8624-BB50RBI-G, which is listed with the same 24-lane, six-port PCIe Gen 2 configuration and 324-FCBGA 19 x 19 mm package. Replacement should still require comparison of the ordering-code suffix, silicon revision, reference clock, reset behavior, power rails, configuration interface, and lifecycle status. Board redesign is not expected only if those controlled characteristics match.
When should I choose PEX8624-BB50RBIF over a different PCIe switch?
Choose PEX8624-BB50RBIF when the design specifically requires a 24-lane, six-port PCIe Gen 2 switch in a 324-FCBGA 19 x 19 mm package and the board can support its dense power, clock, and signal-integrity requirements. Consider another switch when a higher PCIe generation, fewer lanes, a smaller package, or a simpler reference design is needed. The six-port topology is valuable for multi-endpoint systems, but it adds substantial routing and validation complexity.

Dữ liệu tham khảo kỹ thuật cho PEX8624-BB50RBIF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PEX8624-BB50RBIF when the system requires a Broadcom PCIe Gen 2 switching fabric with 24 lanes, six ports, a 5.0 GT/s rate, and a 324-FCBGA 19 x 19 mm footprint. It is particularly useful in acquisition, expansion, storage, and test systems where several endpoint cards must be consolidated behind one host connection. PEX8624-BB50RBI-F is the closest normalized ordering representation, while PEX8624-BB50RBI-G offers the same documented lane, port, speed, and package configuration but may differ in ordering suffix, revision, qualification, or lifecycle state. Do not select on package alone: compare the Broadcom ordering table, reference clock, power requirements, reset configuration, and silicon revision. If the design needs Gen 3 or Gen 4 performance, a different switch family is required. For lower port counts or smaller packages, consider a less complex switch to reduce routing, power, and validation effort.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PEX8624-BB50RBI-F PEX8624-BB50RBI-G
Package 324-FCBGA (19 x 19 mm) 324-FCBGA (19 x 19 mm) 324-FCBGA (19 x 19 mm)
Brand Broadcom Broadcom Broadcom
Product Type PCI Express switch IC PCI Express switch IC PCI Express switch IC
PCI Express Generation Gen 2 Gen 2 Gen 2
Maximum Data Rate 5.0 GT/s 5.0 GT/s 5.0 GT/s
PCI Express Lane Count 24 lanes 24 lanes 24 lanes
Switch Port Count 6 ports 6 ports 6 ports
Number of Terminals 324 balls 324 balls 324 balls

Bảo phân biệt quan trọng

  • Consolidates multiple endpoints behind a six-port Gen 2 topology (vsPEX8624-BB50RBI-G)
  • Uses the same 324-FCBGA mechanical format as the directly indexed alternatives (vsPEX8624-BB50RBI-F)
  • Designed specifically for PCIe Gen 2 rather than newer fabric generations (vsPEX8624-BB50RBI-G)

Ghi chú thiết kế

Use the Broadcom PEX8624 reference layout to define the 324-FCBGA footprint and ball escape strategy. The 19 x 19 mm package has a dense ball pitch, so a two-layer escape is unlikely to provide practical routing for all PCIe lanes and power connections. A multilayer board with short high-speed escape paths, uninterrupted reference planes, and manufacturer-qualified via structures should be modeled and reviewed before schematic-to-layout release.

Route every PCI Express differential pair as a controlled-impedance transmission line with matched length within the tolerance defined by the Broadcom layout guidance. Avoid stubs, unnecessary layer changes, and splits beneath high-speed pairs. Pay particular attention to skew between transmit and receive halves of a lane, because a 5.0 GT/s interface still requires sufficient eye and timing margin after connector, package, and PCB losses are combined.

Separate the switch's core, I/O, and auxiliary supply requirements according to the manufacturer power tree, and verify local decoupling at the corresponding balls. Estimate the worst-case dissipation from total supply power, switching activity, and ambient temperature before selecting copper area or thermal solutions. The 324-ball package has many power and ground connections, so plane continuity and via stitching are as important as the quantity of individual capacitors.

Do not assume that the RBIF, RBI-F, and RBI-G ordering suffixes are interchangeable. Confirm the exact Broadcom ordering table, device revision, temperature grade, qualification status, clock configuration, and lifecycle status for the production build. Also avoid treating the 24-lane total as independently available on every port; link widths and usable lane allocation must match the selected switch configuration and endpoint capabilities.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Broadcom product family and industrial temperature grade are identified, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

pex8624 bb50rbc g pex8624 bb50rbc PEX8624-BB50RBIF datasheet PEX8624-BB50RBIF datasheet pdf PEX8624-BB50RBIF pinout PEX8624-BB50RBIF equivalent PEX8624-BB50RBIF replacement PEX8624-BB50RBIF cross reference PEX8624-BB50RBIF footprint PEX8624-BB50RBIF price PEX8624-BB50RBIF stock Broadcom PEX8624-BB50RBIF PEX8624-BB50RBIF 24 lane switch PEX8624-BB50RBIF application circuit

Các bộ phận và thuật ngữ liên quan

Broadcom PEX8624-BB50RBIF PEX8624-BB50RBI-F PEX8624-BB50RBI-G PEX8624 PCI Express switch PCI Express interface PCIe Gen 2 24-lane PCI Express six-port switch 5.0 GT/s 324-FCBGA FCBGA package 19 x 19 mm package ball grid array surface-mount semiconductor PCIe endpoint root complex differential signal controlled impedance reference clock PERST# industrial temperature grade
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ