Microchip Technology

PIC16F1517-I/P - 20MHz 8-Bit Flash MCU | Microchip

MPN: PIC16F1517-I/P ✓ Hoạt động
1.8 V to 5.5 V Vdss 25 mA source/sink Id 40-pin PDIP Package 20 MHz Speed 14 KB (8K × 14 words) Memory
MOQ: 1 |

PIC16F1517-I/P Tóm tắt

The Microchip Technology PIC16F1517-I/P is an 8-bit PIC16 flash microcontroller with a 20 MHz operating frequency, 14 KB of programmable flash memory, 512 bytes of RAM, and a 40-pin PDIP package. It also integrates a 10-bit, 28-channel ADC with a voltage reference, two 8-bit timers, one 16-bit timer, an extended watchdog timer, and in-circuit debug support. The MCU operates across a 1.8 V to 5.5 V supply range and is rated for -40°C to +85°C operation.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The PIC16F1517 belongs to the PIC16 family of 8-bit RISC microcontrollers and combines a compact instruction set with flash memory for firmware storage. Its position within the broader embedded hierarchy is microcontroller, embedded processor, programmable semiconductor, and integrated circuit. This makes it suitable for compact control systems that need general-purpose logic, analog measurement, and low-power operation without a complex external memory interface.

Key device features include 14 KB of flash program memory organized as 8K × 14 words, 512 bytes of data RAM, and a 10-bit ADC with 28 channels. The integrated voltage reference can source or sink 25 mA, while the I/O structure supports 25 mA source and sink current. Two 8-bit timers, TMR0 and TMR2, and one 16-bit TMR1 timer support periodic events, delays, and time measurement. Programmable ultra-low-power brown-out reset helps establish controlled operating conditions after power is applied.

The PIC16F1517-I/P uses nanoWatt XLP technology and supports ICSP programming plus on-board in-circuit debug. Its 20 MHz maximum clock rate provides deterministic execution for embedded control tasks, while flash memory allows firmware to be updated without external nonvolatile storage. The 10-bit ADC offers a practical balance between measurement resolution, conversion hardware, and power requirements for compact industrial, consumer, and instrumentation products. The device combines a conventional 8-bit architecture with modern integrated analog and power-management peripherals.

Typical applications include low-power sensor nodes, industrial control panels, compact motor controllers, battery-powered instruments, LED-control systems, and general-purpose embedded products. Its 28-channel ADC can monitor multiple analog inputs, TMR1 can provide precise timing, and the 35 I/O capability supports external sensors, displays, communication interfaces, and actuators. The broad operating-voltage range also allows the same design approach to be used across low- and higher-voltage systems.

Designers should preserve the MCLR and programming access requirements, place decoupling capacitance close to the supply pins, and validate reset behavior across the complete input-voltage range. Firmware should also account for the ADC reference, acquisition timing, and the current limits of each I/O pin. The 40-pin PDIP package is appropriate for through-hole prototypes, legacy industrial boards, and designs where easy inspection or replacement is important.

This page combines the PIC16F1517-I/P technical specifications with package guidance, same-family drop-in alternatives, design considerations, and application-focused engineering context. It is intended to support component selection, schematic review, firmware planning, and sourcing decisions before the MCU is committed to a PCB.

Bộ thay thế dễ dàng lắp đặt cho PIC16F1517-I/P — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16F1517-I/P (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Operating Voltage Range, Package.

Microchip Technology
Operating Temperature Range: -40°C to +85°C (industrial)
Operating Voltage Range: 1.8 V to 3.6 V
Package: 40-pin PDIP (P)

PIC16F1516-I/P

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 40-pin PDIP
Program flash is 10 KB versus 14 KB, a 4 KB or approximately 29 percent reduction; major peripherals and package pin count remain family-aligned.

📋 Tham chiếu thay thế (không có trong danh mục)

PIC16F1518-I/P

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 40-pin PDIP
Program flash is 16 KB versus 14 KB, an increase of 2 KB or approximately 14 percent; maximum CPU frequency remains 20 MHz.

📋 Tham chiếu thay thế (không có trong danh mục)

PIC16LF1517-I/P

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 40-pin PDIP
PIC 8-bit RISC (Harvard) · PIC® XLP™ 16F · 14 KB FLASH (8K x 14) · 512 bytes · 128 bytes · 20 MHz · 1.8 V to 3.6 V · 35

Liên hệ để biết giá

Xem tài liệu →

PIC16F1517-I/P Tỷ lệ tối đa & tính chất điện

Microcontroller Type 8-bit PIC16 RISC flash microcontroller
Maximum CPU Frequency 20 MHz
Program Flash Memory 14 KB (8K × 14 words)
Data RAM 512 bytes
ADC Resolution 10 bits
ADC Channels 28 channels
Operating Voltage Range 1.8 V to 5.5 V
Khoảng nhiệt độ hoạt động -40°C to +85°C
8-Bit Timers 2 (TMR0 and TMR2)
16-Bit Timers 1 (TMR1)
Watchdog Timer Enhanced watchdog timer (WDT)
Voltage Reference Output Current 25 mA source/sink
I/O Pin Current 25 mA source/sink
Programming Interface In-Circuit Serial Programming (ICSP)
Debug Support On-Board In-Circuit Debug
Brown-Out Reset Programmable Ultra Low-Power Brown-Out Reset (ULPBOR)
Low-Power Technology nanoWatt XLP
Hộp 40-pin PDIP
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân PIC16F1517-I/P 40-pin pdip

Cấu hình chân cho PIC16F1517-I/P (40-pin pdip gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 40-pin pdip cho PIC16F1517-I/P

Không có dữ liệu chân cụ thể sẵn có cho PIC16F1517-I/P.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PIC16F1517-I/P phù hợp cho 6 Áp dụngs: Industrial Sensor Conditioning, Low-Power Environmental Monitoring, Battery-Powered Data Logger, Compact Motor and Relay Control, LED Lighting and Display Control, Programmable Control and Education Platform.

🏭

Industrial Sensor Conditioning

The PIC16F1517-I/P fits industrial sensor-conditioning systems because its 10-bit ADC supports up to 28 analog channels and its operating range extends to 5.5 V. The 20 MHz processor can execute scaling, filtering, threshold checks, and diagnostics without requiring an external processor. Two 8-bit timers and the 16-bit TMR1 timer support periodic sampling and accurate time-base functions. With 14 KB of flash, the device can also hold application logic and calibration parameters. Use the 40-pin PDIP package when the controller must be assembled on a through-hole industrial board or serviced with conventional through-hole equipment.

🧩

Low-Power Environmental Monitoring

The PIC16F1517-I/P supports compact environmental-monitoring nodes that combine analog sensing with low-power operation. Its 28-channel, 10-bit ADC can sample temperature, humidity, light, or resistive sensor networks, while the programmable ultra-low-power brown-out reset and nanoWatt XLP technology help the node manage intermittent power conditions. The 512 bytes of RAM are suitable for short-term measurement buffering, and 14 KB of flash accommodates acquisition, filtering, and communication routines. Engineers can use TMR2 for periodic sampling and the watchdog timer to recover from stalled operations, but average current should be evaluated against the sensor duty cycle and regulator losses.

⚡

Battery-Powered Data Logger

A PIC16F1517-I/P can serve as the control and logging platform in a battery-powered data logger because it combines low-power XLP features, a 14 KB flash program area, and 512 bytes of RAM. The MCU can wake according to a timer schedule, acquire readings through its 10-bit ADC, timestamp events using TMR1, and store operational state in flash between sleep intervals. Its 1.8 V minimum operating voltage supports low-energy designs, while the extended -40°C to +85°C rating supports industrial environments. Battery-life calculations must include sensor standby current, regulator quiescent current, and the duration of each acquisition cycle rather than relying only on the MCU active current.

🔧

Compact Motor and Relay Control

The PIC16F1517-I/P is appropriate for compact motor, valve, and relay-control platforms that require deterministic timing and mixed digital and analog inputs. Its 20 MHz operating frequency supports responsive control logic, while TMR1 provides a 16-bit timing resource for pulse-width measurement or periodic actuator commands. The 28-channel ADC can monitor supply voltage, current feedback, temperature, or analog position signals. The I/O structure supports 25 mA source and sink operation per the device specification, but inductive loads still require suitable driver circuitry, flyback protection, and a separate supply path. Firmware should include startup delays, watchdog handling, and defined safe states for every output.

💡

LED Lighting and Display Control

The PIC16F1517-I/P can coordinate LED arrays, status indicators, and simple display systems because its flash memory supports structured firmware while its I/O and timer resources manage multiple periodic outputs. TMR0 and TMR2 are useful for low-rate timing tasks, and TMR1 can support longer timing intervals or input-capture duties. The 10-bit ADC can monitor a supply rail, dimmer feedback, or a light sensor to implement automatic brightness control. Because GPIO current limits do not replace proper drive design, high-current LEDs should use constant-current drivers or transistors, with decoupling placed close to the MCU and the package kept thermally separated from heat-producing power stages.

🖥️

Programmable Control and Education Platform

The PIC16F1517-I/P is well suited to educational and programmable control prototypes because it combines an accessible 40-pin PDIP package, flash programming, and on-board in-circuit debug in one device. Students or engineers can experiment with the 28-channel ADC, three timers, watchdog functions, and I/O control without adding separate peripheral ICs. The 14 KB program area is large enough for structured examples involving interrupts, state machines, and communication routines. Because the device is in a through-hole package, it is easy to mount on a development board or prototype with sockets and accessible test points. The programming toolchain and debug probe must include support for the PIC16F151x device family.

Tóm tắt các sản phẩm được đề xuất

PIC16F1517 Base family device used for equivalent embedded-control functions Được sử dụng trong: Industrial Sensor Conditioning, Low-Power Environmental Monitoring, Battery-Powered Data Logger, Compact Motor and Relay Control, LED Lighting and Display Control, Programmable Control and Education Platform PIC16F1517-I/PT Microchip Technology Được sử dụng trong: Industrial Sensor Conditioning, Battery-Powered Data Logger, Compact Motor and Relay Control, LED Lighting and Display Control PIC16F1517-I/MV Microchip Technology Được sử dụng trong: Industrial Sensor Conditioning, Low-Power Environmental Monitoring, Compact Motor and Relay Control PIC16LF1517 Low-voltage family member for reduced-energy sensing platforms Được sử dụng trong: Low-Power Environmental Monitoring, Battery-Powered Data Logger PIC16F1518-I/P Higher-flash same-package option for graphics and larger control tables Được sử dụng trong: LED Lighting and Display Control, Programmable Control and Education Platform PIC16F1516-I/P Lower-flash same-package option for simpler programs Được sử dụng trong: Programmable Control and Education Platform
What are the key specifications of PIC16F1517-I/P that engineers should know?
The PIC16F1517-I/P is an 8-bit flash microcontroller rated up to 20 MHz, with 14 KB of program flash, 512 bytes of RAM, and a 10-bit, 28-channel ADC. It operates from 1.8 V to 5.5 V in a 40-pin PDIP package and includes two 8-bit timers, one 16-bit timer, a watchdog timer, ICSP programming, and on-board in-circuit debug. These characteristics make it suitable for compact embedded-control, sensing, and low-power products where a 40-pin through-hole footprint and simple programming workflow are priorities.
Where can I download the PIC16F1517-I/P datasheet PDF?
The official PIC16F1517-I/P datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001452F.pdf. The document covers the PIC16F151x and PIC16LF151x device family, including electrical characteristics, timing, memory organization, peripherals, and package information. Use the manufacturer document for the authoritative pin-description table, register definitions, recommended operating conditions, and package drawings before laying out or programming the MCU.
Where can I find the PIC16F1517-I/P pinout?
The PIC16F1517-I/P pinout is shown in the pin-description and package-diagram sections of the Microchip Technology PIC16(L)F151x data sheet DS40001452F. The target ordering code uses a 40-pin PDIP package, so engineers should select the 40-pin device drawing rather than the 28-pin or 44-pin outlines shown elsewhere in the family document. Use the manufacturer pin table to assign oscillator, programming, power, I/O, ADC, and timer functions before routing the PCB.
What can replace PIC16F1517-I/P?
PIC16F1516-I/P is the closest lower-memory drop-in candidate because it retains the 40-pin PDIP format and major PIC16F151x peripherals while using 10 KB rather than 14 KB of flash. PIC16F1518-I/P offers a higher-memory route with 16 KB of flash, and PIC16LF1517-I/P targets the lower-voltage 1.8 V to 3.6 V domain. Each candidate requires firmware, brown-out, and operating-voltage checks before it can be treated as a production replacement.
What is the best Microchip equivalent for PIC16F1517-I/P?
PIC16F1516-I/P is the closest same-family option when 10 KB of flash is sufficient, because it preserves the 40-pin PDIP package and the basic PIC16F151x peripheral architecture. Its flash capacity is 4 KB lower than the PIC16F1517-I/P, a reduction of approximately 29 percent, so firmware size must be checked. PIC16F1518-I/P is preferable when more memory is needed, while PIC16LF1517-I/P is appropriate only for a 1.8 V to 3.6 V design.
Is PIC16F1517-I/P suitable for low-voltage sensor applications?
The PIC16F1517-I/P is suitable for low-voltage sensing applications because its specified operating range is 1.8 V to 5.5 V and it includes a 10-bit, 28-channel ADC. It can therefore support multiple analog inputs while retaining flash-based firmware, 512 bytes of RAM, and three timer resources. The designer should verify ADC accuracy at the selected supply voltage, provide local supply bypassing, and use the ULPBOR and watchdog functions to manage unreliable or interrupted power conditions.
What is the difference between PIC16F1517-I/P and PIC16F1518-I/P?
PIC16F1517-I/P provides 14 KB of flash memory, while PIC16F1518-I/P provides 16 KB, an increase of 2 KB or approximately 14 percent. Both belong to the same PIC16F151x family and use the 40-pin PDIP package in the compared ordering codes. The additional flash in PIC16F1518-I/P can accommodate larger firmware or more application code, but the larger program-memory area does not compensate for code that depends on a peripheral configuration unique to one device. Review the family data sheet before substitution.
When should I choose PIC16F1517-I/P over PIC16F1516-I/P?
Choose PIC16F1517-I/P when firmware, bootloader, calibration, or future expansion requires more program memory than PIC16F1516-I/P provides. The PIC16F1517-I/P offers 14 KB of flash compared with 10 KB for PIC16F1516-I/P, providing 4 KB of additional storage while retaining the same 40-pin PDIP format. Choose PIC16F1516-I/P instead when its smaller memory footprint is sufficient and minimizing code-storage requirements matters.
When should I choose PIC16F1517-I/P over PIC16LF1517-I/P?
Choose PIC16F1517-I/P when the design operates across the wider 1.8 V to 5.5 V range or requires compatibility with a 5 V-centered supply environment. PIC16LF1517-I/P is the lower-voltage family option centered on a 1.8 V to 3.6 V operating range, so it is better matched to energy-focused systems whose components use low-voltage signaling. The MCU choice must be coordinated with the regulator, analog signal levels, and brown-out thresholds.
Is PIC16F1517-I/P the same as PIC16LF1517-I/P?
No. PIC16F1517-I/P operates from 1.8 V to 5.5 V, while PIC16LF1517-I/P belongs to the low-voltage family specified for 1.8 V to 3.6 V. Although the related devices share the PIC16F151x product family and can be offered in comparable 40-pin PDIP orderings, their voltage-dependent operating characteristics and firmware configuration can differ. Treat PIC16LF1517-I/P as a redesign candidate for a low-voltage supply rather than an automatic like-for-like replacement.
Where can I buy PIC16F1517-I/P online?
Use the Request a Quote form on this page to request PIC16F1517-I/P availability, quantity breaks, and current sourcing terms. The inquiry should identify the 40-pin PDIP package, industrial temperature grade, and the required commercial or production quantity. Current inventory, lead time, and commercial terms can change, so they should be confirmed through the quote workflow rather than assumed from a historical catalog entry.
What is the price of PIC16F1517-I/P?
The current commercial price for PIC16F1517-I/P should be requested through the Request a Quote form on this page. The structured commercial section records the latest qualifying quantity tier, while the form provides a direct route for checking current availability, volume pricing, and order handling for the exact 40-pin PDIP ordering code. Buyers should include their annual and prototype quantities to obtain the most relevant quotation.
What is the lead time for PIC16F1517-I/P?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Microchip Technology lists the PIC16F1517 family as in production, but production status does not by itself establish available stock for a specific package and grade. Include your required delivery date, order volume, and whether the parts are needed for prototype, qualification, or production use when requesting the quotation.
Is PIC16F1517-I/P in stock?
PIC16F1517-I/P stock should be confirmed through the Request a Quote form on this page. The exact in-stock quantity can vary by package, grade, and order volume, even when the underlying PIC16F1517 family is in production. State the required quantity and target delivery date in the request so the response can distinguish immediate allocation from scheduled manufacturing or longer-lead supply.
What programming and debug features does PIC16F1517-I/P support?
PIC16F1517-I/P supports In-Circuit Serial Programming and on-board in-circuit debug. These facilities allow firmware to be programmed and debugged without removing the MCU from its operating board, reducing rework during development and production. The 14 KB flash memory holds application firmware, while the 40-pin PDIP package makes probe attachment straightforward. The programmer or debugger must support the PIC16F151x device definition and the electrical arrangement selected for ICSP.

Dữ liệu tham khảo kỹ thuật cho PIC16F1517-I/P — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PIC16F1517-I/P when a design needs a 40-pin through-hole MCU, 14 KB of flash, 512 bytes of RAM, a 10-bit multi-channel ADC, and operation across 1.8 V to 5.5 V. Select PIC16F1516-I/P when its 10 KB of program memory is sufficient and reducing flash capacity is preferable. Select PIC16F1518-I/P when 16 KB of flash can simplify firmware growth, bootloader integration, or additional control functions without changing the 40-pin footprint. PIC16LF1517-I/P is appropriate only when the system is intentionally designed around its 1.8 V to 3.6 V operating range. In every case, verify pin functions, peripheral availability, firmware size, reset behavior, and toolchain support against the manufacturer data sheet before releasing production artwork.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PIC16F1516-I/P PIC16F1518-I/P PIC16LF1517-I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
CPU Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC

Bảo phân biệt quan trọng

  • Balanced program memory for a 40-pin design (vsPIC16F1516-I/P)
  • Wider operating-voltage coverage (vsPIC16LF1517-I/P)
  • Uses the same package while avoiding excess flash (vsPIC16F1518-I/P)

Ghi chú thiết kế

Place the required supply-bypass capacitor immediately across the device power pins and connect it to a low-impedance ground plane. Keep the ICSP and MCLR paths away from switching-node and high-current return paths. Because the MCU can operate down to 1.8 V, verify that the regulator start-up sequence, brown-out settings, and external sensor levels remain valid throughout power ramp-up. Do not assume that a 5 V peripheral signal is acceptable on a lower-voltage design without checking the relevant pin limits.

Assign analog inputs away from fast-switching I/O and route them over a continuous ground reference with minimal crossing over split planes. The ADC and internal voltage reference can be sensitive to supply ripple and digital coupling, so the 28-channel analog capability will not provide useful results without careful grounding and filtering. Where the 40-pin PDIP package is used, route ICSP, reset, and debug signals to accessible test pads so programming and diagnosis can be performed without removing the MCU.

The -I/P ordering code combines an industrial temperature grade with a 40-pin PDIP package; do not substitute a 28-pin, 44-pin TQFP, or other package based only on the PIC16F1517 family name. Before using PIC16F1516-I/P or PIC16F1518-I/P, confirm that the compiled image fits the program memory and that every referenced register and peripheral matches the selected device. For PIC16LF1517-I/P, also review clock, brown-out, ADC-reference, and I/O limits for the lower operating-voltage range.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Microchip Technology lists the PIC16F1517 family as in production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this ordering code.

Tìm kiếm liên quan

PIC16F1517-I/P datasheet PIC16F1517-I/P datasheet pdf PIC16F1517-I/P pinout PIC16F1517-I/P equivalent PIC16F1517-I/P replacement PIC16F1517-I/P price PIC16F1517-I/P stock Microchip PIC16F1517-I/P PIC16F1517-I/P 20MHz 14KB PIC16F1517-I/P 40 pin PDIP PIC16F1517-I/P vs PIC16F1518-I/P PIC16F1517-I/P application circuit

Các bộ phận và thuật ngữ liên quan

Microchip Technology PIC16F1517-I/P PIC16F1517 PIC16F1516-I/P PIC16F1518-I/P PIC16LF1517-I/P PIC16 8-bit RISC microcontroller flash microcontroller embedded microcontroller programmable semiconductor 20 MHz 14 KB flash memory 512-byte RAM 10-bit ADC 28-channel ADC nanoWatt XLP technology In-Circuit Serial Programming on-board in-circuit debug ULPBOR 40-pin PDIP through-hole package industrial temperature range timer
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ