PIC16F1517-I/P - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F1517-I/P ✓ 啟用中PIC16F1517-I/P 概覽
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The PIC16F1517 belongs to the PIC16 family of 8-bit RISC microcontrollers and combines a compact instruction set with flash memory for firmware storage. Its position within the broader embedded hierarchy is microcontroller, embedded processor, programmable semiconductor, and integrated circuit. This makes it suitable for compact control systems that need general-purpose logic, analog measurement, and low-power operation without a complex external memory interface.
Key device features include 14 KB of flash program memory organized as 8K × 14 words, 512 bytes of data RAM, and a 10-bit ADC with 28 channels. The integrated voltage reference can source or sink 25 mA, while the I/O structure supports 25 mA source and sink current. Two 8-bit timers, TMR0 and TMR2, and one 16-bit TMR1 timer support periodic events, delays, and time measurement. Programmable ultra-low-power brown-out reset helps establish controlled operating conditions after power is applied.
The PIC16F1517-I/P uses nanoWatt XLP technology and supports ICSP programming plus on-board in-circuit debug. Its 20 MHz maximum clock rate provides deterministic execution for embedded control tasks, while flash memory allows firmware to be updated without external nonvolatile storage. The 10-bit ADC offers a practical balance between measurement resolution, conversion hardware, and power requirements for compact industrial, consumer, and instrumentation products. The device combines a conventional 8-bit architecture with modern integrated analog and power-management peripherals.
Typical applications include low-power sensor nodes, industrial control panels, compact motor controllers, battery-powered instruments, LED-control systems, and general-purpose embedded products. Its 28-channel ADC can monitor multiple analog inputs, TMR1 can provide precise timing, and the 35 I/O capability supports external sensors, displays, communication interfaces, and actuators. The broad operating-voltage range also allows the same design approach to be used across low- and higher-voltage systems.
Designers should preserve the MCLR and programming access requirements, place decoupling capacitance close to the supply pins, and validate reset behavior across the complete input-voltage range. Firmware should also account for the ADC reference, acquisition timing, and the current limits of each I/O pin. The 40-pin PDIP package is appropriate for through-hole prototypes, legacy industrial boards, and designs where easy inspection or replacement is important.
This page combines the PIC16F1517-I/P technical specifications with package guidance, same-family drop-in alternatives, design considerations, and application-focused engineering context. It is intended to support component selection, schematic review, firmware planning, and sourcing decisions before the MCU is committed to a PCB.
直接替換替代品,適用於 PIC16F1517-I/P — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC16F1517-I/P (相同外形與佔位) — 差異在於 Operating Temperature Range, Operating Voltage Range, Package.
PIC16F1516-I/P
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC16F1518-I/P
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC16LF1517-I/P
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F1517-I/P 最大額定值與電氣特性
| Microcontroller Type | 8-bit PIC16 RISC flash microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Flash Memory | 14 KB (8K × 14 words) |
| Data RAM | 512 bytes |
| ADC Resolution | 10 bits |
| ADC Channels | 28 channels |
| Operating Voltage Range | 1.8 V to 5.5 V |
| 工作溫度範圍 | -40°C to +85°C |
| 8-Bit Timers | 2 (TMR0 and TMR2) |
| 16-Bit Timers | 1 (TMR1) |
| Watchdog Timer | Enhanced watchdog timer (WDT) |
| Voltage Reference Output Current | 25 mA source/sink |
| I/O Pin Current | 25 mA source/sink |
| Programming Interface | In-Circuit Serial Programming (ICSP) |
| Debug Support | On-Board In-Circuit Debug |
| Brown-Out Reset | Programmable Ultra Low-Power Brown-Out Reset (ULPBOR) |
| Low-Power Technology | nanoWatt XLP |
| 封裝 | 40-pin PDIP |
| 安裝類型 | Through-hole |
PIC16F1517-I/P 40-pin pdip 腳位配置指南
PIC16F1517-I/P(40-pin pdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC16F1517-I/P.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC16F1517-I/P 適用於 6 應用s: Industrial Sensor Conditioning, Low-Power Environmental Monitoring, Battery-Powered Data Logger, Compact Motor and Relay Control, LED Lighting and Display Control, Programmable Control and Education Platform.
Industrial Sensor Conditioning
The PIC16F1517-I/P fits industrial sensor-conditioning systems because its 10-bit ADC supports up to 28 analog channels and its operating range extends to 5.5 V. The 20 MHz processor can execute scaling, filtering, threshold checks, and diagnostics without requiring an external processor. Two 8-bit timers and the 16-bit TMR1 timer support periodic sampling and accurate time-base functions. With 14 KB of flash, the device can also hold application logic and calibration parameters. Use the 40-pin PDIP package when the controller must be assembled on a through-hole industrial board or serviced with conventional through-hole equipment.
推薦
Low-Power Environmental Monitoring
The PIC16F1517-I/P supports compact environmental-monitoring nodes that combine analog sensing with low-power operation. Its 28-channel, 10-bit ADC can sample temperature, humidity, light, or resistive sensor networks, while the programmable ultra-low-power brown-out reset and nanoWatt XLP technology help the node manage intermittent power conditions. The 512 bytes of RAM are suitable for short-term measurement buffering, and 14 KB of flash accommodates acquisition, filtering, and communication routines. Engineers can use TMR2 for periodic sampling and the watchdog timer to recover from stalled operations, but average current should be evaluated against the sensor duty cycle and regulator losses.
推薦
Battery-Powered Data Logger
A PIC16F1517-I/P can serve as the control and logging platform in a battery-powered data logger because it combines low-power XLP features, a 14 KB flash program area, and 512 bytes of RAM. The MCU can wake according to a timer schedule, acquire readings through its 10-bit ADC, timestamp events using TMR1, and store operational state in flash between sleep intervals. Its 1.8 V minimum operating voltage supports low-energy designs, while the extended -40°C to +85°C rating supports industrial environments. Battery-life calculations must include sensor standby current, regulator quiescent current, and the duration of each acquisition cycle rather than relying only on the MCU active current.
推薦
Compact Motor and Relay Control
The PIC16F1517-I/P is appropriate for compact motor, valve, and relay-control platforms that require deterministic timing and mixed digital and analog inputs. Its 20 MHz operating frequency supports responsive control logic, while TMR1 provides a 16-bit timing resource for pulse-width measurement or periodic actuator commands. The 28-channel ADC can monitor supply voltage, current feedback, temperature, or analog position signals. The I/O structure supports 25 mA source and sink operation per the device specification, but inductive loads still require suitable driver circuitry, flyback protection, and a separate supply path. Firmware should include startup delays, watchdog handling, and defined safe states for every output.
推薦
LED Lighting and Display Control
The PIC16F1517-I/P can coordinate LED arrays, status indicators, and simple display systems because its flash memory supports structured firmware while its I/O and timer resources manage multiple periodic outputs. TMR0 and TMR2 are useful for low-rate timing tasks, and TMR1 can support longer timing intervals or input-capture duties. The 10-bit ADC can monitor a supply rail, dimmer feedback, or a light sensor to implement automatic brightness control. Because GPIO current limits do not replace proper drive design, high-current LEDs should use constant-current drivers or transistors, with decoupling placed close to the MCU and the package kept thermally separated from heat-producing power stages.
推薦
Programmable Control and Education Platform
The PIC16F1517-I/P is well suited to educational and programmable control prototypes because it combines an accessible 40-pin PDIP package, flash programming, and on-board in-circuit debug in one device. Students or engineers can experiment with the 28-channel ADC, three timers, watchdog functions, and I/O control without adding separate peripheral ICs. The 14 KB program area is large enough for structured examples involving interrupts, state machines, and communication routines. Because the device is in a through-hole package, it is easy to mount on a development board or prototype with sockets and accessible test points. The programming toolchain and debug probe must include support for the PIC16F151x device family.
推薦
推薦產品摘要
工程參考資料,適用於 PIC16F1517-I/P — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC16F1516-I/P | PIC16F1518-I/P | PIC16LF1517-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP |
| CPU Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
主要差異化特點
- Balanced program memory for a 40-pin design (對比PIC16F1516-I/P)
- Wider operating-voltage coverage (對比PIC16LF1517-I/P)
- Uses the same package while avoiding excess flash (對比PIC16F1518-I/P)
設計說明
Place the required supply-bypass capacitor immediately across the device power pins and connect it to a low-impedance ground plane. Keep the ICSP and MCLR paths away from switching-node and high-current return paths. Because the MCU can operate down to 1.8 V, verify that the regulator start-up sequence, brown-out settings, and external sensor levels remain valid throughout power ramp-up. Do not assume that a 5 V peripheral signal is acceptable on a lower-voltage design without checking the relevant pin limits.
Assign analog inputs away from fast-switching I/O and route them over a continuous ground reference with minimal crossing over split planes. The ADC and internal voltage reference can be sensitive to supply ripple and digital coupling, so the 28-channel analog capability will not provide useful results without careful grounding and filtering. Where the 40-pin PDIP package is used, route ICSP, reset, and debug signals to accessible test pads so programming and diagnosis can be performed without removing the MCU.
The -I/P ordering code combines an industrial temperature grade with a 40-pin PDIP package; do not substitute a 28-pin, 44-pin TQFP, or other package based only on the PIC16F1517 family name. Before using PIC16F1516-I/P or PIC16F1518-I/P, confirm that the compiled image fits the program memory and that every referenced register and peripheral matches the selected device. For PIC16LF1517-I/P, also review clock, brown-out, ADC-reference, and I/O limits for the lower operating-voltage range.
合規資訊
Microchip Technology lists the PIC16F1517 family as in production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this ordering code.