PIC16F874-20/L - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F874-20/L ✗ Cuối đờiPIC16F874-20/L Tóm tắt
An 8-bit microcontroller is a compact embedded-control device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC16F874-20/L executes a 200 nanosecond instruction cycle and supports a compact instruction set of 35 single-word instructions, allowing control logic to be implemented with efficient register-based operations. Its Flash-based architecture supports in-circuit programming and allows firmware to be updated without a separate programmable-memory device.
The verified product information identifies 7 KB of Flash program memory, 192 bytes of RAM, 33 I/O pins, and communication capabilities including I2C, SPI, and UART. These features make the PIC16F874-20/L appropriate for industrial embedded controllers, data-acquisition equipment, communications modules, and general-purpose control boards where multiple digital inputs and outputs are required. The 20 MHz maximum clock speed provides a useful balance between processing throughput, power consumption, and design simplicity.
The PLCC-44 package provides a mechanically robust, socket-compatible form factor for prototype boards, legacy control systems, and applications where field replacement is useful. Because the package uses a leaded surface-mount format rather than a fine-pitch package, the device is also practical for designs assembled without lead-free component placement constraints. The product designation includes the 20 MHz speed grade and the /L package and temperature-grade suffix.
The PIC16F874-20/L is a general-purpose MCU rather than a dedicated power, signal, or communications component. Designers should use the manufacturer datasheet for the complete pin assignment, electrical limits, timing characteristics, memory map, and peripheral configuration. The device should be selected when an established PIC16F874 design, Flash programmability, and a 44-pin PLCC footprint are more important than using the newest or smallest microcontroller in the family.
This page combines the verified manufacturer and distributor information for PIC16F874-20/L with practical sourcing, packaging, and design guidance. It highlights the 20 MHz operating speed, 7 KB Flash memory, 192-byte RAM, 33 I/O pins, and PLCC-44 package so engineers can quickly assess fit, programming requirements, and board compatibility before requesting a quote.
Bộ thay thế dễ dàng lắp đặt cho PIC16F874-20/L — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16F874-20/L (cùng hình factor và footprint) — khác nhau ở Package, ADC, Timers, Instruction Cycle Time, Mounting Type.
PIC16F874-20/P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16F874A-I/L
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16F874-20/L Tỷ lệ tối đa & tính chất điện
| Device Type | 8-bit CMOS Flash microcontroller |
| Tần số xung maksimum | 20 MHz |
| Instruction Execution Time | 200 ns |
| Program Memory | 7 KB Flash (4K x 14 words) |
| RAM | 192 bytes |
| General-Purpose I/O | 33 I/O pins |
| Hộp | 44-pin PLCC (16.59 mm x 16.59 mm) |
| Programmable Memory Type | CMOS Flash |
| Instruction Set | 35 single-word instructions |
| Serial Interface - I2C | Supported |
| Serial Interface - SPI | Supported |
| Serial Interface - UART | Supported |
| Architecture | PIC architecture |
| Kiểu lắp đặt | Surface mount |
| Package Body Size | 16.59 mm x 16.59 mm |
Hướng dẫn cấu hình chân PIC16F874-20/L 16.59 mm x 16.59 mm
Cấu hình chân cho PIC16F874-20/L (16.59 mm x 16.59 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC16F874-20/L.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC16F874-20/L phù hợp cho 6 Áp dụngs: Industrial Embedded Control, Data Acquisition Controller, Communications Equipment, Instrumentation Front Panel, Motor and Relay Sequencer, Automotive Accessory Controller.
Industrial Embedded Control
The PIC16F874-20/L fits legacy industrial control equipment that needs 33 digital I/O lines, 20 MHz processing, and programmable Flash memory in an established 44-pin PLCC footprint. Its PIC architecture and 35 single-word instructions support responsive state-machine logic for relays, interlocks, actuators, and machine monitoring. I2C, SPI, and UART connectivity allows the controller to communicate with sensors, remote I/O modules, displays, and supervisory equipment. Because the PLCC package is socket-friendly, it can also simplify upgrades to boards built around the original PIC16F874 design.
Được đề xuất
Data Acquisition Controller
The PIC16F874-20/L can coordinate a small data-acquisition system by combining 33 I/O pins with a 20 MHz execution rate and integrated I2C, SPI, and UART interfaces. SPI is useful for high-speed sensor and converter connections, while UART can stream measurements to a host computer and I2C can support low-speed sensors and configuration devices. Its 7 KB Flash program space is appropriate for compact acquisition firmware, calibration tables, and communication routines, although front-end signal conditioning remains essential for accurate analog measurements.
Được đề xuất
Communications Equipment
The PIC16F874-20/L is suited to protocol conversion and embedded communications modules that need both serial interfaces and a broad set of digital controls. UART handles asynchronous point-to-point links, SPI supports peripheral buses, and I2C connects configuration chips or low-speed transducers. At 20 MHz, the MCU can manage framing, status indicators, timeout handling, and protocol state machines while leaving 33 I/O pins available for indicators, control lines, and service interfaces. The PLCC package is especially helpful for serviceable legacy equipment boards.
Được đề xuất
Instrumentation Front Panel
The PIC16F874-20/L can serve as the control processor for an instrumentation front panel with status LEDs, buttons, displays, and service ports. Its 33 I/O pins provide ample digital connections for indicators and input controls, while the 20 MHz clock and 200 ns instruction execution support responsive user-interface updates. UART or SPI can connect a display or external controller, and I2C can be used for configuration or sensor accessories. The 44-pin PLCC package makes the MCU practical for instruments designed around socketed or replaceable controller modules.
Được đề xuất
Motor and Relay Sequencer
The PIC16F874-20/L can implement sequencing and interlocking logic for relays, solenoids, lamps, and small motor-control systems. The 20 MHz operating speed provides ample timing margin for debouncing inputs and coordinating multiple outputs, while 33 I/O pins reduce the need for external logic. Flash permits firmware changes during maintenance, and the UART can support diagnostics from a technician or supervisory controller. Suitable power stages, isolation, protection, and suppression components should be added according to the load characteristics.
Được đề xuất
Automotive Accessory Controller
The PIC16F874-20/L can be evaluated for accessory and body-control functions that require multiple digital I/O, Flash firmware, and serial diagnostics. I2C, SPI, and UART allow connection to switches, sensors, display modules, and gateway electronics, while the 20 MHz MCU handles debouncing, state management, and fault reporting. Any automotive use requires confirmation of the exact temperature grade, automotive qualification status, transient immunity, and load-dump requirements. A vehicle-specific qualified PIC16F device is generally preferable when those requirements cannot be demonstrated for this ordering code.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC16F874-20/L — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC16F874-20/P | PIC16F874A-I/L |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin PLCC (16.59 mm x 16.59 mm) | 44-pin PLCC - verify exact package code | 44-pin PLCC |
| General-Purpose I/O | 33 I/O pins | 33 I/O pins | 33 I/O pins |
| Architecture | 8-bit PIC CMOS Flash | 8-bit PIC CMOS Flash | 8-bit PIC CMOS Flash |
| Communication Interfaces | I2C, SPI, UART | I2C, SPI, UART | I2C, SPI, UART |
Bảo phân biệt quan trọng
- Established 20 MHz PIC16F874 platform in a serviceable PLCC package (vsPIC16F874A-I/L)
- Seven communications and control connections support compact peripheral integration (vsPIC16F874-20/P)
- Direct fit for boards designed around the original PIC16F874-20/L order code (vsPIC16F874A-I/L)
Ghi chú thiết kế
Use the Microchip Technology package drawing and pin-description table when assigning the 44-pin PLCC footprint. Confirm whether the target board uses a socket or direct PLCC placement, and verify the pin-1 orientation against the board outline. Keep programming, reset, power, and decoupling pins in the layout even when firmware does not initially use every peripheral, because later revisions or recovery operations can depend on those connections.
Follow the exact supply-voltage and decoupling requirements stated in the PIC16F874 datasheet. Place the required input and output bypass capacitors adjacent to their corresponding device pins, with the shortest possible ground return. Use a power source with appropriate startup and transient behavior for the board, and do not infer a 5 V operating point from the MCU family alone because the permitted voltage range is tied to the specific device suffix and operating conditions.
Treat PIC16F874-20/L, PIC16F874-20/P, and PIC16F874A-I/L as different order codes even when their package descriptions appear similar. Before substitution, compare the speed grade, temperature range, memory organization, pin assignment, programming requirements, and errata status. Microchip identifies PIC16F884 as a newer device; moving to it may require firmware, peripheral, and PCB changes rather than a simple component swap.
Route I2C and SPI signals as controlled-impedance PCB traces where applicable, keeping them away from switching nodes and high-current relay or motor paths. Add pull-up resistors to I2C lines according to bus voltage, capacitance, and speed rather than using arbitrary values. For UART connections, provide common ground or the appropriate isolation strategy and account for logic-level thresholds across the connected devices.
Thông tin tuân thủ
The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact PIC16F874-20/L order code. Confirm these attributes using the manufacturer product documentation and current supplier declarations.
