PIC16LC63A-04I/SO - 8-bit MCU, 7KB OTP, 22 I/O, 28-SOIC | Microchip
MPN: PIC16LC63A-04I/SO ✓ Hoạt độngPIC16LC63A-04I/SO Tóm tắt
What is a PIC16C-series microcontroller? PIC16C-series microcontrollers are 8-bit Harvard-architecture MCUs built around a RISC CPU with 35 single-word instructions. The 'LC' suffix denotes a low-power CMOS process node optimized for battery and sleep-dominated applications, while the '63A' part belongs to Microchip's mid-range PIC16 family targeting general-purpose control. These MCUs sit in the broader hierarchy: microcontroller -> embedded MCU -> 8-bit RISC processor -> semiconductor IC. They typically include on-chip peripherals such as timers, a USART, capture/compare/PWM modules and parallel ports, with program memory available in EPROM, OTP or ROM flavors.
The PIC16LC63A-04I/SO features a high-performance RISC CPU, fully static design (allowing the clock to be stopped without losing register state), a wide operating voltage range and a 4 MHz maximum clock at 3V. It is offered in industrial temperature grade (denoted by the 'I' suffix) with low typical current consumption. Its 22 I/O pins are sufficient for keypad scanning, LED matrix driving, simple sensor hubs and serial-bridge applications. The 28-SOIC package enables standard surface-mount assembly and easy hand-soldering for prototyping.
Typical applications include industrial control panels, appliance user-interface controllers, low-power remote sensor nodes, smart-meter peripherals, and serial-bridge or protocol-converter modules. Designers choose the PIC16C63A family for legacy code reuse, deterministic interrupt latency, and long-life-cycle availability in industrial markets.
When designing with this device, ensure your firmware is OTP-compatible (single programmability), allocate decoupling capacitors close to VDD/VSS pins, and validate oscillator startup behavior across the industrial temperature range. For modern designs requiring re-programmability, consider the flash-based PIC16F equivalent families.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical engineering design notes not found in the manufacturer datasheet alone, providing a one-stop reference for procurement, engineering, and lifecycle planning.
Bộ thay thế dễ dàng lắp đặt cho PIC16LC63A-04I/SO — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16LC63A-04I/SO (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, Program Memory Size, Operating Temperature, Connectivity.
PIC16LC63A-04/SO
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16LC63-04I/SO
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16LC63-04/SO
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16LC63-04I/SP
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16LC63A-04I/SP
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16LC63A-04I/SO Tỷ lệ tối đa & tính chất điện
| Manufacturer | Microchip Technology |
| Series | PIC 16C |
| Core Processor | PIC |
| Core Size | 8-bit |
| Program Memory Size | 7 KB (4K x 14) OTP |
| RAM Size | 192 bytes |
| Number of I/O | 22 |
| Maximum Clock Speed | 4 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Khoảng nhiệt độ hoạt động | -40C to +85C (Industrial) |
| Hộp | 28-SOIC (SO), 0.295 inch body width |
| Kiểu lắp đặt | Surface Mount |
| Program Memory Type | OTP (One-Time-Programmable) |
| Connectivity | USART/SCI |
| Peripherals | Brown-out Detect, PWM, WDT |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC16LC63A-04I/SO
| Chân 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Chân 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Chân 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Chân 4 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Chân 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / Voltage reference plus |
| Chân 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Chân 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| Chân 8 | OSC2/CLKOUT — Oscillator crystal output / Clock out |
| Chân 9 | OSC1/CLKIN — Oscillator crystal input / External clock in |
| Chân 10 | VSS — Ground reference |
| Chân 11 | VDD — Positive supply voltage (3.0-5.5 V) |
| Chân 12 | RB0/INT — PORTB bit 0 / External interrupt |
| Chân 13 | RB1 — PORTB bit 1 |
| Chân 14 | RB2 — PORTB bit 2 |
| Chân 15 | RB3/PGM — PORTB bit 3 / Low-voltage programming |
| Chân 16 | RB4 — PORTB bit 4 |
| Chân 17 | RB5 — PORTB bit 5 |
| Chân 18 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Chân 19 | RB7/PGD — PORTB bit 7 / ICSP data |
| Chân 20 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / Timer1 clock in |
| Chân 21 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator in / CCP2 |
| Chân 22 | RC2/CCP1 — PORTC bit 2 / Capture Compare PWM 1 |
| Chân 23 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Chân 24 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Chân 25 | RC5/SDO — PORTC bit 5 / SPI data out |
| Chân 26 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| Chân 27 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| Chân 28 | VSS — Ground reference |
Ứng dụng tiêu biểu
PIC16LC63A-04I/SO phù hợp cho 7 Áp dụngs: Industrial Control Panel MCU, Appliance User-Interface Controller, Low-Power Remote Sensor Node, Smart-Meter Peripheral Controller, Serial Bridge / Protocol Converter, Automotive Under-Hood Auxiliary Module, LED Display and Sign Multiplexer.
Industrial Control Panel MCU
The PIC16LC63A-04I/SO fits industrial control panels because it combines industrial-grade -40C to +85C operation, 22 I/O lines and a USART for keypad/scanner/HMI aggregation. Its 7 KB OTP holds deterministic state machines and serial protocol handlers without the overhead of an RTOS. The 4 MHz clock and 3.0-5.5 V supply let it share the same 5 V rail as optocouplers and 24 V interface ICs.
Được đề xuất
Appliance User-Interface Controller
For appliance UIs such as washing machines, dishwashers and microwave keypads, the PIC16LC63A-04I/SO offers 22 I/O for matrix-scanned keypads and 7-segment/LED multiplexed displays, plus PWM channels for buzzer tones and indicator dimming. The 4 MHz clock and OTP memory keep BOM cost low while the industrial temp grade survives the heat of enclosed appliance housings.
Được đề xuất
Low-Power Remote Sensor Node
The 'LC' low-power CMOS process and 3.0 V minimum supply make the PIC16LC63A-04I/SO a candidate for battery-powered remote sensor nodes that wake periodically, sample a sensor over analog or I/O, and transmit via USART to an external radio. The 192-byte RAM is small but adequate for sampled buffers, and the wide voltage range supports 3.3 V coin-cell or Li-Ion chemistries.
Được đề xuất
Smart-Meter Peripheral Controller
Smart-meter sub-assemblies for electricity, water or gas monitoring benefit from the PIC16LC63A-04I/SO's industrial temp range, 22 I/O for pulse counters and tamper switches, and USART for linking to the main metrology MCU. The OTP memory locks calibration coefficients and security identifiers, preventing firmware tampering in deployed meters.
Được đề xuất
Serial Bridge / Protocol Converter
The PIC16LC63A-04I/SO's hardware USART plus 22 GPIO makes it well-paired to legacy-to-modern protocol bridges: RS-232 to TTL, RS-485 to UART, or I2C/SPI bit-banged masters to a UART host. The 4 MHz clock delivers enough instruction bandwidth for half-duplex protocol translation at typical 9600-115200 baud rates without handshake dropouts.
Được đề xuất
Automotive Under-Hood Auxiliary Module
Although not AEC-Q100 qualified, the PIC16LC63A-04I/SO is used in non-safety automotive peripherals such as cabin HVAC flap drivers, mirror controllers and seat-position memories where its -40C to +85C industrial range covers cabin thermal loads. The 22 I/O drives small brushed motors via PWM and reads Hall-effect position sensors through the analog comparator.
Được đề xuất
LED Display and Sign Multiplexer
Driving 7-segment or dot-matrix LED signs requires many GPIO plus PWM for brightness control - exactly the 22 I/O and PWM peripheral mix of the PIC16LC63A-04I/SO. The 4 MHz clock multiplexes 8-digit displays with acceptable refresh, and the OTP memory holds font tables and scrolling message buffers without needing external EEPROM.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC16LC63A-04I/SO — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC16LC63A-04/SO | PIC16LC63-04I/SO | PIC16LC63-04/SO |
|---|---|---|---|---|
| Package | 28-SOIC (SO) | 28-SOIC (SO) - same | 28-SOIC (SO) - same | 28-SOIC (SO) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Temperature Grade | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C | Commercial 0C to +70C |
| Program Memory | 7 KB OTP (4K x 14) | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| Maximum Clock | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Number of I/O | 22 | 22 | 22 | 22 |
| Supply Voltage | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Silicon Revision | A-revision | A-revision | Pre-A revision | Pre-A revision |
| Price @ qty 100 (USD) | 5.20 | 5.20 | 5.40 | 5.40 |
Bảo phân biệt quan trọng
- Industrial temperature grade (-40C to +85C) (vsPIC16LC63A-04/SO)
- A-revision silicon with ADC refinements (vsPIC16LC63-04I/SO)
- Wider voltage range 3.0-5.5 V versus standard CMOS 4.0-6.0 V (vsPIC16C63A-04I/SO (non-LC variant))
Ghi chú thiết kế
Estimated: at 5 V supply, 4 MHz active clock and 22 I/O switching at 100 kHz, the PIC16LC63A-04I/SO typically draws 2-5 mA active plus per-I/O load. Decouple VDD (pin 11) with a 100 nF ceramic placed within 5 mm of the pin, plus a 10 uF bulk tantalum or aluminum polymer on the supply rail. The second VSS pin (28) must be returned to ground; do not leave it floating or ADC readings will degrade.
The 28-SOIC package has a 0.05 inch pitch and 0.295 inch body width. Route MCLR (pin 1) with a 10 kohm pull-up to VDD and a 100 nF cap to ground for clean resets; keep the trace short to avoid false resets from EMI. Place the 4-20 MHz crystal (or ceramic resonator) within 10 mm of OSC1/OSC2 (pins 9/8) with grounded guard traces to suppress noise coupling into the timer/capture peripherals.
OTP parts cannot be re-programmed: once you blow the security fuse or commit code to OTP, any firmware bug requires physical part replacement. Always validate firmware on a windowed CERDIP PIC16C63A-04/JW or an equivalent flash PIC16F73-I/SO emulator before committing to OTP production parts. Brown-out detect (BOD) must be enabled in the configuration word for industrial deployments to avoid latch-up on brown-out events.
The 22 I/O pins share functions with analog inputs and the ICSP programming interface (RB3/RB6/RB7). When using ICSP for in-circuit programming, isolate the PGC/PGD lines from high-speed switching signals to avoid programming glitches. Series 100 ohm resistors on RB6/RB7 improve programming reliability in noisy environments.
Thông tin tuân thủ
RoHS compliant per IC-Components product listing. Not AEC-Q100 qualified - for AEC-Q100 automotive designs use dsPIC30F family.
