PIC24F08KM101-E/SO - 32MHz 8KB 16-Bit MCU | Microchip
MPN: PIC24F08KM101-E/SO ✓ Hoạt độngPIC24F08KM101-E/SO Tóm tắt
A PIC XLP microcontroller is a low-power embedded controller combining a 16-bit RISC core, digital peripherals, analog conversion functions, and communications interfaces in one integrated circuit. It belongs to the PIC24F family of 16-bit microcontrollers, where low-power design and a small pin count suit compact control, sensing, and communication products.
Principal features include a 32 MHz maximum operating speed, 8 KB of Flash organized as 2.75K × 24 words, 1K × 8 bits of RAM, and 512 × 8 bits of EEPROM. The device supports operation from 1.8 V to 5.5 V and integrates a 12-bit ADC, comparator, and flexible capture, compare, and PWM modules. Communication capabilities include I2C, SPI, UART/USART, IrDA, and LINbus support.
The 20-pin architecture concentrates mixed-signal and control resources into a compact package. Its 12-bit ADC supports embedded measurement, while the comparator can perform threshold detection without a separate analog device. The integrated EEPROM provides nonvolatile parameter storage, and the 8 KB Flash region accommodates control firmware and application code within the constraints of a small low-power design.
Typical applications include industrial sensor controllers, compact motor and actuator controls, battery-powered instruments, communications modules, LED lighting controllers, and compact consumer appliances. The combination of low pin count, 1.8 V to 5.5 V operating range, and multiple serial interfaces makes the PIC24F08KM101-E/SO appropriate for designs that need flexible embedded control without a high pin-count package.
During PCB design, assign analog, power, ground, and programming pins according to the manufacturer pin-description table, and verify the external decoupling and oscillator requirements for the selected configuration. Firmware should also account for the peripheral mix and electrical limits associated with the exact PIC24F KM variant before production release.
This page consolidates the device specifications, family-based drop-in alternatives, interface capabilities, and design guidance into one engineering reference for component selection and PCB implementation.
Bộ thay thế dễ dàng lắp đặt cho PIC24F08KM101-E/SO — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24F08KM101-E/SO (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, Low-Power Technology, Program Memory (Flash), Comparators.
PIC24F08KM101-I/SO
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24F08KM101T-I/SO
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24F08KM100-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24F08KM102-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC24F08KM100T-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24F08KM102T-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC24F08KM101-E/SO Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit PIC XLP 24F microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 8 KB (2.75K × 24 words) |
| RAM | 1 KB (1K × 8 bits) |
| EEPROM | 512 bytes (512 × 8 bits) |
| Operating Voltage Range | 1.8 V to 5.5 V |
| ADC Resolution | 12 bits |
| Comparator | Integrated |
| Capture/Compare/PWM Modules | Integrated flexible modules |
| Serial Interfaces | I2C, SPI, UART/USART, IrDA, and LINbus |
| Hộp | 20-pin SOIC (0.295 inch, 7.50 mm width) |
| Terminal Count | 20 pins |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Automotive grade |
| Low-Power Technology | nanoWatt eXtreme low-power technology |
| Core Architecture | 16-bit RISC |
| Program Memory Type | Flash |
| Nonvolatile Data Memory | EEPROM |
Hướng dẫn cấu hình chân PIC24F08KM101-E/SO 20-pin soic (0.295 inch, 7.50 mm width)
Cấu hình chân cho PIC24F08KM101-E/SO (20-pin soic (0.295 inch, 7.50 mm width) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24F08KM101-E/SO.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24F08KM101-E/SO phù hợp cho 6 Áp dụngs: Industrial Sensor Controller, Battery-Powered Measurement Instrument, Compact Motor and Actuator Control, Communications Module, LED Lighting Controller, Consumer Appliance Control.
Industrial Sensor Controller
The PIC24F08KM101-E/SO fits compact industrial sensing equipment that needs local analog measurement, deterministic control, and serial connectivity. Its integrated 12-bit ADC can acquire sensor signals, while the comparator can implement a hardware threshold event without continuous software polling. The 32 MHz CPU supports responsive control logic, and the 1 KB RAM provides working space for measurements and communication buffers. I2C and SPI provide options for connecting sensors and programmable logic, while UART/USART supports service consoles or upstream controllers. Its 1.8 V to 5.5 V operating range accommodates industrial rails, and the -E temperature-grade option suits extended-temperature equipment.
Battery-Powered Measurement Instrument
The PIC24F08KM101-E/SO is appropriate for a battery-powered measurement instrument where processing capability must be balanced against low-power operation. The PIC24F KM family uses nanoWatt eXtreme low-power technology, and the device integrates a 12-bit ADC, comparator, EEPROM, and multiple communications interfaces. The 8 KB Flash stores firmware, while 1 KB of RAM supports short acquisition and processing buffers; the 512-byte EEPROM can retain calibration or configuration data. For a compact design, the 20-pin SOIC footprint leaves board area for the sensor, power conversion, and battery conditioning.
Compact Motor and Actuator Control
The PIC24F08KM101-E/SO can serve as the control core in a small motor or actuator module because it combines 32 MHz processing with flexible capture, compare, and PWM resources. Timers can generate deterministic control waveforms, while the 12-bit ADC and comparator support current, position, temperature, or limit sensing. The 20-pin SOIC package provides a compact footprint for equipment where space is constrained. Designers should allocate pins according to the exact peripheral mapping, select an appropriate external driver for the load, and verify that PWM and communication activity remain compatible with the device's operating and temperature limits.
Communications Module
The PIC24F08KM101-E/SO suits a low-pin-count communications module requiring several host-facing interfaces. I2C supports short-distance sensor and configuration buses, SPI supports higher-speed peripherals, and UART/USART, IrDA, and LINbus options broaden its applicability in industrial links, remote controls, and optically isolated serial links. The 32 MHz core can handle protocol processing and local control, while 8 KB Flash and 1 KB RAM provide space for compact embedded firmware. The 1.8 V to 5.5 V range permits integration with both low-voltage and 5 V interface ecosystems, subject to each peripheral's supply requirements.
LED Lighting Controller
The PIC24F08KM101-E/SO is well suited to a compact LED lighting controller because its capture/compare/PWM resources can generate dimming and sequencing signals while the 12-bit ADC can monitor a current or illumination feedback channel. The comparator can provide fast fault or threshold detection, and the integrated EEPROM can retain lighting scenes and calibration settings. With 32 MHz processing, the controller can combine feedback regulation, user-interface handling, and communications without using a higher-pin-count MCU. The 20-pin SOIC package reduces board size, while the -E temperature-grade option supports extended industrial environments.
Consumer Appliance Control
The PIC24F08KM101-E/SO can serve as the embedded controller in a compact appliance that combines local buttons, a sensor, and an actuator. The 12-bit ADC handles analog controls or condition monitoring, the comparator supports simple limit detection, and the serial interfaces allow connection to a display, module, or service adapter. Its 1 KB RAM and 8 KB Flash are sufficient for compact control code but require deliberate allocation if the product stores user data or complex sequences. The 20-pin SOIC package supports automated assembly and board-space reduction, while 1.8 V to 5.5 V operation provides flexibility in low-voltage accessory designs.
Dữ liệu tham khảo kỹ thuật cho PIC24F08KM101-E/SO — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24F08KM101-I/SO | PIC24F08KM101T-I/SO | PIC24F08KM100-I/SO | PIC24F08KM102-I/SO | PIC24F08KM100T-I/SO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SOIC | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same | 20-pin SOIC - same |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB (2.75K × 24 words) | 8 KB (2.75K × 24 words) | 8 KB (2.75K × 24 words) | 8 KB | 8 KB | 8 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Temperature Ordering Option | -E extended automotive grade | -I industrial grade | -I industrial grade | -I industrial grade | -I industrial grade | -I industrial grade |
Bảo phân biệt quan trọng
- Automotive temperature ordering option (vsPIC24F08KM101-I/SO)
- Closest same-device ordering alternative (vsPIC24F08KM101T-I/SO)
- Integrated mixed-signal and communications resources (vsPIC24F08KM100-I/SO)
Ghi chú thiết kế
Design the supply network for the full 1.8 V to 5.5 V operating range and place the required bypass capacitors close to the device power pins. Separate analog and digital return paths where the board architecture permits, and route high-current switching-node copper away from ADC and comparator inputs. Confirm the voltage limits of every connected sensor and communication peripheral because an individual interface may not tolerate the complete MCU supply range.
Use the manufacturer package drawing and pin-description table when assigning the 20-pin SOIC footprint. Preserve access to programming and debug functions in the production layout, maintain adequate clearance around analog inputs, and avoid routing fast communication or PWM signals parallel to sensitive measurement traces. If the internal oscillator is used, follow the recommended layout and decoupling arrangement to reduce sensitivity to switching noise and temperature.
Do not substitute an -I/SO or T-I/SO device for the automotive -E/SO option without accepting the lower temperature-grade requirement. Also verify peripheral assignments before choosing PIC24F08KM100 or PIC24F08KM102 alternatives. The shared 20-pin footprint and 32 MHz architecture make these devices attractive drop-in candidates, but changes in analog, communications, or timer resources can still alter firmware and board requirements.
Keep I2C, SPI, UART/USART, IrDA, and LINbus routing away from ADC and comparator inputs, especially when switching supplies or PWM outputs share the board. Apply the manufacturer's recommended pull-up values for communication interfaces, keep traces short where bus capacitance is significant, and provide a defined ground reference for each interface. For sensor measurements, evaluate source impedance and acquisition timing because the 12-bit converter does not remove errors caused by an unsuitable signal source or poorly conditioned reference.
Thông tin tuân thủ
The -E/SO ordering option is identified as automotive temperature grade, but no explicit AEC-Q100 qualification or environmental-compliance statement is present. These fields remain unknown rather than being inferred from the temperature suffix.
