PIC24FJ48GA002-E/SS - 32MHz 16-Bit MCU | Microchip
MPN: PIC24FJ48GA002-E/SS ✓ Hoạt độngPIC24FJ48GA002-E/SS Tóm tắt
A PIC24F microcontroller is a compact embedded-processing device combining a 16-bit CPU core, Flash program memory, SRAM data memory, digital and analog peripherals, and flexible pin multiplexing. The PIC24FJ48GA002 family belongs to the Microchip PIC24F general-purpose platform, positioned between simple 8-bit controllers and higher-performance 32-bit microcontrollers. Its SSOP package and mixed-signal peripherals make it useful for compact embedded controls requiring more computation and memory than an entry-level MCU.
The PIC24FJ48GA002-E/SS provides 48KB of program Flash organized as 16K x 24 words, 8192 bytes of RAM, and 16 MIPS performance at a 32MHz system clock. Its integrated peripherals include I2C, SPI, and PMP connectivity according to the product attributes for this exact ordering code. The extended-temperature E suffix supports operation from -40°C to +125°C, while the 28-SSOP format is suited to cost-sensitive control boards where a fine-pitch surface-mount package is acceptable.
The core architecture uses a 16-bit instruction set with a 17 x 17 hardware multiplier and a single-cycle 32-bit by 16-bit divider. This accelerates common embedded operations without requiring a separate arithmetic accelerator. A system internal oscillator supports clock arrangements where an external crystal is unnecessary, while the nanoWatt feature set allows software-driven reduction of activity in suitable duty-cycle-based designs. Device programming and debugging require all designated VDD and VSS connections to be implemented as described in the manufacturer datasheet.
Typical uses include industrial sensor controllers, compact data-acquisition modules, building-control interfaces, programmable logic controllers, instrument-control panels, and connected embedded products. The combination of 48KB Flash, 8KB RAM, 21 I/O, serial interfaces, and extended-temperature capability supports control tasks that need moderate firmware storage, multiple peripheral connections, and reliable operation across industrial temperature ranges.
PCB design should follow the 28-pin SSOP land pattern and preserve the manufacturer-defined power, ground, programming, and decoupling connections. Because all VDD and VSS pins must be connected, omitting a power-ground pin may prevent programming or cause unreliable operation. Confirm the exact pin assignment and alternate DISVREG connection in the PIC24FJ48GA002 datasheet before releasing a layout.
This page organizes the controller's core memory, performance, package, and peripheral attributes with practical application guidance, replacement constraints, and design checks. The comparison focuses on true same-footprint drop-in options, while the design notes highlight power-connection, programming, and layout issues that can determine whether a compact embedded design operates reliably after manufacture.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ48GA002-E/SS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ48GA002-E/SS (cùng hình factor và footprint) — khác nhau ở Package, ADC, Core, I2C, Operating Temperature.
PIC24FJ48GA002-I/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ48GA002-E/SS Tỷ lệ tối đa & tính chất điện
| Processor Core | PIC24 16-bit core |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Program Memory Type | Flash |
| Program Memory Size | 48 KB (16K x 24 words) |
| RAM Size | 8192 bytes |
| Hardware Multiplier | 17 x 17 bits |
| Hardware Divider | 32-bit by 16-bit, single cycle |
| Number of I/O Pins | 21 pins |
| Hộp | 28-lead SSOP |
| Package Pin Pitch | 0.65 mm |
| Khoảng nhiệt độ hoạt động | -40°C to +125°C |
| Internal Oscillator | Yes |
| Serial Interfaces | I2C, SPI, and PMP |
| Power Management | nanoWatt architecture |
| Kiểu lắp đặt | Surface mount |
| Shipping Package | Tube |
Hướng dẫn cấu hình chân PIC24FJ48GA002-E/SS tube
Cấu hình chân cho PIC24FJ48GA002-E/SS (tube gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ48GA002-E/SS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ48GA002-E/SS phù hợp cho 3 Áp dụngs: Hệ thống tích hợp, Máy thiết bị IoT, Điều khiển công nghiệp.
Hệ thống tích hợp
Xử lý trung tâm trong các ứng dụng tích hợp sử dụng PIC24FJ48GA002-E/SS.
Máy thiết bị IoT
Máy thiết bị kết nối thông minh được cung cấp bởi PIC24FJ48GA002-E/SS.
Điều khiển công nghiệp
Hệ thống tự động hóa và điều khiển sử dụng PIC24FJ48GA002-E/SS.
Dữ liệu tham khảo kỹ thuật cho PIC24FJ48GA002-E/SS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ48GA002-I/SS |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | SSOP-28 | SSOP-28 |
| Processor Core | 16-bit PIC24 core | 16-bit PIC24 core |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS | 16 MIPS |
| Flash Memory | 48 KB (16K x 24 words) | 48 KB (16K x 24 words) |
| RAM Size | 8192 bytes | 8192 bytes |
| Number of I/O Pins | 21 pins | 21 pins |
| Serial Interfaces | I2C, SPI, and PMP | I2C, SPI, and PMP |
Bảo phân biệt quan trọng
- Extended-temperature ordering option (vsPIC24FJ48GA002-I/SS)
- Direct retention of the controller architecture (vsPIC24FJ48GA002-I/SS)
- Fine-pitch surface-mount integration (vsPIC24FJ48GA002-E/SO)
Ghi chú thiết kế
Implement every VDD and VSS connection specified for the 28-lead SSOP pinout. The device guidance specifically states that all VDD and VSS pins must be connected and warns that leaving one unconnected may cause programming to fail. Place the local bypass capacitors near the associated supply pins and keep high-current return paths away from sensitive analog and communication traces.
Follow the manufacturer pin-description table when assigning the 0.65mm-pitch SSOP footprint, including programming, reset, communications, and multiplexed peripheral functions. Verify the permitted DISVREG connection in the PIC24FJ48GA002 datasheet before fabrication. A mechanically correct footprint is not sufficient if a required power-ground or programming connection has been reassigned.
Estimate the regulator dissipation from the actual input voltage, output voltage, and peak load current, then verify the worst case with the component and board thermal limits. The nanoWatt feature supports power-conscious operation, but it does not remove the need to size the supply and decoupling for startup current, peripheral activity, and transient load changes.
Do not treat PIC24FJ48GA002-E/SS, PIC24FJ48GA002-E/SO, and PIC24FJ48GA002-I/SS as interchangeable package options. The E/SS and I/SS versions use SSOP, while E/SO uses SOIC; the suffix also identifies the temperature grade. Before substitution, compare the complete ordering code, package land pattern, operating-temperature requirement, programming configuration, and production qualification.
Thông tin tuân thủ
The manufacturer product page and ordering-code information do not establish the requested environmental or automotive compliance status for the exact ordering code.