PIC24FJ64GP202-E/SO - 32MHz 64KB USB Microcontroller | Microchip
MPN: PIC24FJ64GP202-E/SO ✓ Hoạt độngPIC24FJ64GP202-E/SO Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, and peripherals on one integrated circuit. The PIC24FJ64GP202 belongs to the PIC24F family of 16-bit low-power microcontrollers, within the broader embedded-control and semiconductor hierarchy. It combines a compact instruction set with dedicated USB and core-independent peripherals, allowing firmware to coordinate real-time control and host, device, or OTG USB functions.
Key features include a 16-bit CPU operating up to 32 MHz, 64 KB of ECC Flash, 8 KB of RAM, 21 I/O pins, and Full Speed USB 2.0 Host, Device, and OTG operation. The integrated DMA controller and core-independent peripherals reduce processor intervention in data movement and time-sensitive tasks. Low-power operation includes sleep current down to a few hundred nanoseconds' worth of current in the PIC24FJ GP2/GU2 family, making the device suitable for systems that spend substantial time idle.
The PIC24 core provides interrupt-driven control and supports communication, timing, and mixed-signal applications without requiring a separate processor. ECC Flash improves reliability in applications where retained program code must be protected against bit errors, while the 8 KB RAM supports buffers, protocol stacks, and working variables. The 28-pin SOIC footprint is larger than compact QFN packages but remains practical for through-hole assembly, prototyping, and designs requiring generous board access.
Typical uses include USB data loggers, configuration tools, portable measurement equipment, industrial interface modules, and embedded instrumentation that needs a 16-bit control platform. In a USB data logger, the controller can collect samples, move data with DMA, and present the results through a USB connection. In an industrial interface, its 21 I/O pins can support switches, indicators, sensors, and communication peripherals while sleep operation helps control standby consumption.
Designers should verify the exact pin assignment and exposed-power requirements against the manufacturer datasheet before laying out the PCB. USB signal routing requires short, controlled impedance traces and correct placement of the required support components. Firmware should also use the controller's low-power modes and interrupt architecture carefully so that USB timing, data retention, and wake-up behavior remain deterministic.
This page organizes the key electrical, memory, package, and USB characteristics while adding application guidance, drop-in alternatives, and design notes for engineers evaluating the PIC24FJ64GP202-E/SO in low-pin-count USB control systems.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ64GP202-E/SO — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ64GP202-E/SO (cùng hình factor và footprint).
PIC24FJ64GP202-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC24FJ64GP203-E/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GP204-E/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GP205-E/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GP203-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GP202-E/SO Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit PIC24F low-power microcontroller |
| Maximum CPU Frequency | 32 MHz |
| CPU Throughput | 16 MIPS |
| Core Architecture | 16-bit PIC core |
| Program Memory | 64 KB Flash (22K x 24 words) |
| Program Memory Type | ECC Flash |
| Data Memory | 8 KB RAM |
| Number of I/O Pins | 21 pins |
| USB Interface | Full Speed USB 2.0 Host/Device/OTG |
| Operating Voltage Range | 2 V to 3.6 V |
| Hộp | 28-pin SOIC, 7.50 mm width |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Extended temperature |
| Core-Independent Peripherals | CIP peripherals |
| DMA Controller | Two-channel DMA controller |
| Sleep Current | Down to a few hundred nA at the family level |
| Low-Power Timer Oscillator | Independent 32 kHz timer oscillator |
| I/O Drive Current | 18 mA source and 18 mA sink per I/O pin |
Hướng dẫn cấu hình chân PIC24FJ64GP202-E/SO 28-pin soic, 7.50 mm width
Cấu hình chân cho PIC24FJ64GP202-E/SO (28-pin soic, 7.50 mm width gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ64GP202-E/SO.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ64GP202-E/SO phù hợp cho 6 Áp dụngs: USB Data Logger, Industrial Interface Module, Portable Measurement Instrument, USB Configuration Tool, USB-to-Serial Protocol Bridge, Low-Power Sensor Node.
USB Data Logger
The PIC24FJ64GP202-E/SO fits a USB data logger that records sensor or system events and presents them to a host computer. Its 32 MHz 16-bit processor provides responsive control, while 64 KB of ECC Flash stores firmware and 8 KB of RAM supports acquisition buffers. The dedicated DMA controller can transfer data between peripherals and memory with less CPU intervention. Full Speed USB Device operation enables the logger to appear as a standard peripheral, while the 21 I/O pins accommodate digital status inputs, trigger signals, and indicators.
Được đề xuất
Industrial Interface Module
PIC24FJ64GP202-E/SO can serve as the controller in an industrial interface module that connects sensors, actuators, and configuration controls to a USB host. The 21 I/O pins provide practical digital connectivity, while the 16-bit CPU handles protocols and deterministic control tasks. Its 2 V to 3.6 V operating range supports compact embedded systems, and the core-independent peripherals can run timing or communication functions alongside the main application. The 28-pin SOIC package also simplifies assembly where component accessibility matters.
Được đề xuất
Portable Measurement Instrument
The PIC24FJ64GP202-E/SO is suitable for a portable measurement instrument that combines acquisition, local processing, and USB communication. The 32 MHz processor supports responsive sampling control and protocol handling, while 8 KB of RAM can hold working buffers and the 64 KB ECC Flash protects programmed firmware. Sleep current down to a few hundred nanoamperes at the family level helps conserve battery energy during idle intervals. The microcontroller's USB Device support enables direct connection to a laptop or service tool without adding a separate interface controller.
Được đề xuất
USB Configuration Tool
PIC24FJ64GP202-E/SO can control a USB-connected configuration tool used to program, identify, or adjust attached equipment. Its 21 I/O pins can support configuration switches, status LEDs, control relays, and serial communications. The 16-bit CPU provides enough performance for protocol translation and nonblocking USB servicing, while ECC Flash improves confidence in retained firmware integrity. Sleep operation reduces consumption when the tool is connected but idle, and the 28-pin SOIC package remains practical for moderately sized controller boards.
Được đề xuất
USB-to-Serial Protocol Bridge
The PIC24FJ64GP202-E/SO can implement a flexible USB-to-serial bridge with protocol conversion or device emulation. Its 32 MHz core supports background serial reception, USB handling, and data buffering, while 8 KB of RAM accommodates command queues and packet staging. Full Speed USB Device operation presents the bridge as a standard peripheral, and the 21 available I/O pins support multiple serial channels, logic-level enables, and status indicators. This arrangement is useful for adapting legacy equipment to a modern USB control environment.
Được đề xuất
Low-Power Sensor Node
PIC24FJ64GP202-E/SO fits a low-power sensor node that samples local inputs and periodically communicates with a host or gateway. Its sleep current of a few hundred nanoamperes at the family level supports aggressive duty-cycled operation, provided external sensors and pull networks also meet the power budget. The 16-bit CPU can filter data and manage thresholds, while the two-channel DMA controller moves samples with reduced processing overhead. USB Host, Device, and OTG support offers flexibility for wired commissioning or direct peripheral connections.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ64GP202-E/SO — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ64GP202-I/SO | PIC24FJ64GP203-E/SO | PIC24FJ64GP204-E/SO | PIC24FJ64GP205-E/SO | PIC24FJ64GP203-I/SO |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Temperature Ordering Option | Extended temperature | Industrial temperature | Extended temperature | Extended temperature | Extended temperature | Industrial temperature |
Bảo phân biệt quan trọng
- Extended-temperature ordering option with full-speed USB integration (vsPIC24FJ64GP202-I/SO)
- 16-bit processing performance in a 28-pin embedded-control package (vsPIC24FJ64GP203-E/SO)
- ECC-protected program memory with USB and low-power operation (vsPIC24FJ64GP204-E/SO)
Ghi chú thiết kế
Design the 2 V to 3.6 V supply so it remains stable across USB attachment states, load transients, and cable insertion events. Place the required input and decoupling capacitors close to the corresponding power pins and keep return-current paths short. Confirm the capacitor voltage rating, ESR requirements, and USB bus-powered current limit against the manufacturer datasheet before releasing the PCB.
Route Full Speed USB D+ and D- as a short, matched pair away from clocks, switching nodes, and high-current switching-regulator traces. Use the manufacturer's recommended USB support network and maintain a continuous reference plane beneath the interface. Firmware should also implement the required USB suspend, resume, and wake behavior to prevent unintended current draw.
Do not treat a shared SOIC outline as proof of complete drop-in compatibility. Before replacing PIC24FJ64GP202-E/SO, compare power pins, ground pins, I/O functions, USB data lines, programming interfaces, and every multiplexed peripheral connection in the manufacturer pin-description table. Also confirm that the selected alternative provides the required temperature grade and peripheral set.
Use the PIC24FJ64GP202-E/SO's DMA channels carefully so that transfers do not conflict with peripheral ownership or interrupt timing. Establish clear buffer boundaries, keep USB servicing latency within specification, and avoid long critical sections that delay full-speed USB packet handling. The family sleep current is very low, but total system consumption can be dominated by USB pull-ups, LEDs, sensors, and powered external components.
Thông tin tuân thủ
The manufacturer page identifies an extended-temperature automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the cited product information.