PIC24EP32GP202-E/SO - 32KB 16-Bit MCU | Microchip
MPN: PIC24EP32GP202-E/SO ✓ Hoạt độngPIC24EP32GP202-E/SO Tóm tắt
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC24EP32GP202 belongs to the PIC24E general-purpose MCU family within the broader embedded-controller hierarchy. Its 16-bit architecture supports real-time control, while integrated analog circuitry can reduce the component count in sensing, motor-control, and industrial instrumentation systems.
Key features include 32 KB of Flash program memory, 4 KB of RAM, an ADC, CTMU, internal operational amplifiers, comparators, and a Peripheral Trigger Generator. The manufacturer describes a high-speed 70 MIPS core, while distributor listings identify the device as a 16-bit MCU capable of 60 MIPS. High-speed PWM with 7.14 ns resolution supports precise switching and timing applications.
The PIC24E architecture combines a 16-bit core with dedicated peripheral hardware intended for general-purpose embedded systems. The CTMU provides touch, timing, and measurement functions, while the internal operational amplifiers support signal conditioning without requiring external amplifiers where appropriate. Comparators and the Peripheral Trigger Generator help implement threshold decisions and hardware-triggered events with less firmware overhead.
Typical uses include industrial control panels, motor and power conversion systems, instrumentation, LED lighting equipment, and compact consumer products requiring mixed analog and digital control. The 28-pin SOIC package is suitable for conventional surface-mount assembly where a through-hole lead pitch and a moderate pin count are preferred over a very small package.
Designers should verify the exact pin functions and exposed connections against the manufacturer pin-description table before layout release. The 3.0 V to 3.6 V operating range requires a regulated supply with appropriate transient margin. Firmware development should use the programming and debugging tools supported for the PIC24EPxxGP family, including the supported PIC24E device families.
This page combines the device specifications, verified lifecycle information, package details, drop-in replacement candidates, practical design guidance, and engineering comparisons needed to plan a PIC24EP32GP202-E/SO-based embedded system efficiently.
Bộ thay thế dễ dàng lắp đặt cho PIC24EP32GP202-E/SO — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24EP32GP202-E/SO (cùng hình factor và footprint) — khác nhau ở ADC, Operating Temperature, Package, CTMU, Comparators.
PIC24EP32GP202T-E/SO
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24EP32GP202I/SO
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24EP32GP202T-I/SO
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC24EP32GP202-E/SO Tỷ lệ tối đa & tính chất điện
| Architecture | 16-bit PIC24E |
| Flash Memory | 32 KB |
| Program Memory Organization | 10.7K words x 24 bits |
| RAM | 4 KB |
| Maximum Core Performance | 70 MIPS |
| Distributor Rated Performance | 60 MIPS |
| Operating Voltage | 3.0 V to 3.6 V |
| Nhiệt độ hoạt động | -40 °C to +125 °C |
| ADC | Integrated ADC |
| CTMU | Integrated capacitive touch and measurement unit |
| Operational Amplifiers | Integrated op amps |
| Comparators | Integrated comparators |
| Peripheral Trigger Generator | Integrated PTG |
| PWM Resolution | 7.14 ns |
| Hộp | 28-pin SOIC, 7.50 mm width |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Extended temperature grade |
Hướng dẫn cấu hình chân PIC24EP32GP202-E/SO 28-pin soic, 7.50 mm width
Cấu hình chân cho PIC24EP32GP202-E/SO (28-pin soic, 7.50 mm width gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24EP32GP202-E/SO.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24EP32GP202-E/SO phù hợp cho 6 Áp dụngs: Industrial Control Panels, Motor and Power Conversion Control, Precision Instrumentation, LED Lighting and Dimming Control, Human-Machine Interface Control, Battery-Powered Sensor Nodes.
Industrial Control Panels
The PIC24EP32GP202-E/SO fits industrial control panels that require deterministic sensing, actuator control, and communications in one compact MCU. Its 16-bit core, up to 70 MIPS class performance, 32 KB Flash memory, and 4 KB RAM provide enough resources for control logic, state handling, and parameter storage. The integrated ADC supports analog process monitoring, while comparators and the PTG can trigger events without excessive interrupt overhead. The -40 °C to +125 °C rating supports a broad range of industrial ambient conditions, and the 28-pin SOIC simplifies assembly on conventional control boards.
Được đề xuất
Motor and Power Conversion Control
The PIC24EP32GP202-E/SO is well suited to real-time motor-control and power-conversion subsystems where fast switching timing and analog measurements must coexist. The 16-bit core provides efficient control-loop execution, while the 7.14 ns PWM resolution supports precise edge placement and duty-cycle control. Internal comparators can monitor fast feedback signals, and the ADC can observe slower control voltages or temperatures. Its 3.0 V to 3.6 V supply range integrates naturally with 3.3 V gate-driver and sensing electronics, provided the external power stage and switching-node isolation are designed appropriately.
Được đề xuất
Precision Instrumentation
The PIC24EP32GP202-E/SO can serve as the central controller in compact measurement instruments that combine sensor conditioning, data processing, and a communications interface. Its integrated operational amplifiers and comparators may reduce the number of external analog components in suitable low-level signal paths, while the CTMU supports capacitive sensing and precise timing functions. The 32 KB Flash accommodates firmware, calibration tables, and configuration data, and the 4 KB RAM supports working buffers. Engineers should verify amplifier bandwidth, input range, offset, and output drive against their particular sensor before relying on an internal amplifier.
Được đề xuất
LED Lighting and Dimming Control
The PIC24EP32GP202-E/SO is appropriate for programmable LED lighting systems requiring accurate current modulation, fault detection, and user-interface coordination. Its high-speed PWM capability, including 7.14 ns resolution, enables precise switching control for dimming and sequencing. The ADC can monitor LED current or temperature feedback, while comparators support rapid threshold detection and fault handling. With 32 KB Flash and 4 KB RAM, the device can store lighting profiles, calibration coefficients, and communication handlers. The 28-pin SOIC package leaves sufficient pins for multiple channels, serial control, and status signaling in a compact driver board.
Được đề xuất
Human-Machine Interface Control
The PIC24EP32GP202-E/SO can manage compact human-machine interfaces containing buttons, encoders, status indicators, and a small serial display. Its CTMU can implement capacitive touch sensing, reducing the need for dedicated touch-controller ICs when the required electrode arrangement and environmental conditions are suitable. The 16-bit core handles debouncing, menu logic, display updates, and communications concurrently, while 32 KB Flash provides room for interface firmware and assets. Its 3.3 V operating range aligns with common display and communications peripherals, making pin assignment and peripheral multiplexing important parts of the board plan.
Được đề xuất
Battery-Powered Sensor Nodes
The PIC24EP32GP202-E/SO fits compact battery-powered sensor nodes that require local signal conditioning and low-power standby operation. The ADC and CTMU can support sensor acquisition, while the internal comparators provide threshold decisions with low software overhead. The 3.0 V to 3.6 V operating range is compatible with regulated 3.3 V power rails, and the 32 KB Flash memory supports protocol stacks and local data processing. Sleep behavior, peripheral wake conditions, and analog accuracy must be checked against the node's duty cycle and measurement requirements. The SOIC package is particularly practical for prototypes and repair-friendly industrial sensor modules.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24EP32GP202-E/SO — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24EP32GP202T-E/SO | PIC24EP32GP202I/SO | PIC24EP32GP202T-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Architecture | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB |
| Temperature Grade | Extended grade, -40 °C to +125 °C | Extended grade, -40 °C to +125 °C | Industrial grade; exact upper limit requires confirmation | Industrial grade; exact upper limit requires confirmation |
| Integrated Analog and Timing Peripherals | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG |
| Programming and Peripheral Compatibility | PIC24EP32GP202 family | PIC24EP32GP202 family | PIC24EP32GP202 family | PIC24EP32GP202 family |
Bảo phân biệt quan trọng
- Extended-temperature 28-pin SOIC configuration (vsPIC24EP32GP202I/SO)
- Integrated analog and event-control peripherals (vsPIC24EP32GP202T-E/SO)
- Same-footprint replacement path without PCB changes (vsPIC24EP32GP202T-E/SO)
- Real-time control performance in an integrated MCU (vsPIC24EP32GP202T-I/SO)
Ghi chú thiết kế
Route the 3.3 V supply and ground return using a low-impedance distribution path, and place the required decoupling capacitors close to the corresponding VDD and VSS pins. Keep analog inputs away from PWM outputs, switching nodes, and high-current return paths to reduce injected noise. The integrated op amps and comparators can reduce external component count, but their pins should still be routed with short analog traces and a quiet ground reference.
Use the manufacturer pin-description and alternate-function tables before assigning communication, programming, or analog pins. The CTMU, ADC, comparators, and internal op amps share a finite set of pins with digital functions, so an incorrect multiplexing choice can affect both signal quality and firmware configuration. Confirm that each peripheral's direction, analog enable state, peripheral pin-select registers, and direction controls are configured consistently for the final board revision.
Do not treat the /SO, T, I, and E ordering suffixes as interchangeable without checking the Microchip ordering guide. The SO suffix identifies the 28-pin SOIC configuration, while E and I identify temperature ordering classes and T identifies a shipping configuration. A hardware-compatible alternative can still be operationally unsuitable if the ambient range, packing requirement, qualification, or programmed-device configuration does not match the original design.
Design the 3.0 V to 3.6 V supply with transient margin rather than relying on a nominal 3.3 V rail alone. Confirm voltage accuracy at the MCU pins under startup, load changes, and temperature extremes. If the board shares a rail with motors, LEDs, radio transmitters, or switching converters, verify that ripple remains within the device's operating and noise limits and place local bypass capacitance at the supply pins.
Use the 28-pin SOIC footprint and land pattern from the manufacturer package drawing, paying particular attention to pin-1 orientation and solder-paste or assembly compatibility. Keep programming and debug access accessible on assembled boards. For analog signals routed from external connectors, use a quiet return path, guard structures where appropriate, and controlled spacing from switching inductors or power-stage copper.
Thông tin tuân thủ
The -E ordering suffix denotes an extended-temperature grade, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation.