PIC24FJ96GA006T-I/PT - 16-bit 96KB Flash MCU, 64-TQFP | Microchip
MPN: PIC24FJ96GA006T-I/PT ✓ Hoạt độngPIC24FJ96GA006T-I/PT Tóm tắt
Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family is Microchip's 16-bit MCU line using a modified Harvard RISC architecture, positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. PIC24F devices specifically target low-power and cost-sensitive embedded applications requiring more performance and code density than 8-bit MCUs.
Key features of the PIC24FJ96GA006T-I/PT include eXtreme Low Power (XLP) technology for battery-friendly operation, dual I2C, dual SPI, and dual UART communication peripherals, multiple 16-bit timers, a 10-bit ADC, and a 16-bit Parallel Master Port. The integrated Peripheral Pin Select (PPS) feature allows flexible digital peripheral remapping, simplifying PCB layout. The 64-pin TQFP provides ample I/O for human-interface, sensor, and motor-control front-ends.
Technical depth: The PIC24FJ core operates from 2.0 V to 3.6 V, supports 16 MIPS performance, and includes hardware multiply/divide and a deterministic interrupt response. The 96 KB Flash is organized as 32K x 24 words, allowing C-compiler-friendly code density, while the 8 KB SRAM supports moderate data buffering. The device also features a Real-Time Clock Calendar (RTCC) with dedicated 32 kHz oscillator input.
Typical applications include industrial sensor nodes, portable medical devices, USB peripherals, graphical user interfaces with segmented LCDs, low-power wireless sensor hubs, and consumer appliance controllers. The wide peripheral mix suits connected-embedded designs that require multi-protocol communication and ample code space.
Design consideration: ensure the selected programming toolchain (MPLAB X IDE with XC16 compiler) is set for the PIC24FJ target, and respect the 3.3 V supply range to avoid damaging the core logic. For lowest standby power, leverage the deep-sleep mode with RTCC retention.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and source the right MCU for volume production.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ96GA006T-I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ96GA006T-I/PT (cùng hình factor và footprint) — khác nhau ở Core Architecture, Package, ADC, Program Memory (Flash), Mounting Type.
PIC24FJ64GA006T-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ128GA006T-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ96GA006-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ96GA006T-I/MR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GC006T-I/PT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ96GA006T-I/PT Tỷ lệ tối đa & tính chất điện
| Core Architecture | PIC24F (16-bit RISC, modified Harvard) |
| Maximum CPU Speed | 32 MHz (16 MIPS at 3.3 V) |
| Program Memory (Flash) | 96 KB (32K x 24 words) |
| Data Memory (SRAM) | 8 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| I/O Pins | 53 |
| Hộp | 64-pin TQFP (10x10 mm) |
| ADC | 10-bit |
| Communication Peripherals | 2x I2C, 2x SPI, 2x UART |
| Timers | Multiple 16-bit timers |
| Peripheral Pin Select (PPS) | Yes |
| Real-Time Clock Calendar (RTCC) | Yes |
| Nhiệt độ hoạt động | -40C to +85C (Industrial) |
| Kiểu lắp đặt | Surface Mount (Tape & Reel) |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC24FJ96GA006T-I/PT
| Chân 1 | RC1 — Digital I/O with PPS remap capability |
| Chân 2 | RC2 — Digital I/O with PPS remap capability |
| Chân 3 | RC3 — Digital I/O with PPS remap capability |
| Chân 4 | RC4 — Digital I/O with PPS remap capability |
| Chân 5 | RC5 — Digital I/O with PPS remap capability |
| Chân 6 | VSS — Ground reference |
| Chân 7 | RC6 — Digital I/O with PPS remap capability |
| Chân 8 | RC7 — Digital I/O with PPS remap capability |
| Chân 9 | RC8 — Digital I/O with PPS remap capability |
| Chân 10 | RC9 — Digital I/O with PPS remap capability |
| Chân 11 | VDD — Positive supply (2.0V-3.6V) |
| Chân 12 | VSS — Ground reference |
| Chân 13 | RA0 — Analog input / digital I/O |
| Chân 14 | RA1 — Analog input / digital I/O |
| Chân 15 | RA2 — Analog input / digital I/O |
| Chân 16 | RA3 — Analog input / digital I/O |
| Chân 17 | RA4 — Analog input / digital I/O |
| Chân 18 | RA5 — Analog input / digital I/O |
| Chân 19 | RA6 — Analog input / digital I/O |
| Chân 20 | RA7 — Analog input / digital I/O |
| Chân 21 | VSS — Ground reference |
| Chân 22 | VDD — Positive supply (2.0V-3.6V) |
| Chân 23 | RB0 — Digital I/O / analog input |
| Chân 24 | RB1 — Digital I/O / analog input |
| Chân 25 | RB2 — Digital I/O / analog input |
| Chân 26 | RB3 — Digital I/O / analog input |
| Chân 27 | RB4 — Digital I/O / analog input |
| Chân 28 | RB5 — Digital I/O / analog input / PGED3 |
| Chân 29 | RB6 — Digital I/O / analog input / PGEC3 |
| Chân 30 | RB7 — Digital I/O / analog input |
| Chân 31 | RB8 — Digital I/O / analog input |
| Chân 32 | RB9 — Digital I/O / analog input |
| Chân 33 | RB10 — Digital I/O / analog input |
| Chân 34 | RB11 — Digital I/O / analog input |
| Chân 35 | VSS — Ground reference |
| Chân 36 | VDD — Positive supply (2.0V-3.6V) |
| Chân 37 | RD0 — Digital I/O with PPS remap capability |
| Chân 38 | RD1 — Digital I/O with PPS remap capability |
| Chân 39 | RD2 — Digital I/O with PPS remap capability |
| Chân 40 | RD3 — Digital I/O with PPS remap capability |
| Chân 41 | RD4 — Digital I/O with PPS remap capability |
| Chân 42 | RD5 — Digital I/O with PPS remap capability |
| Chân 43 | RD6 — Digital I/O with PPS remap capability |
| Chân 44 | RD7 — Digital I/O with PPS remap capability |
| Chân 45 | VSS — Ground reference |
| Chân 46 | OSC1 — Crystal oscillator input |
| Chân 47 | OSC2 — Crystal oscillator output |
| Chân 48 | RD8 — Digital I/O with PPS remap capability |
| Chân 49 | RD9 — Digital I/O with PPS remap capability |
| Chân 50 | RD10 — Digital I/O with PPS remap capability |
| Chân 51 | RD11 — Digital I/O with PPS remap capability |
| Chân 52 | RD12 — Digital I/O with PPS remap capability |
| Chân 53 | RD13 — Digital I/O with PPS remap capability |
| Chân 54 | RD14 — Digital I/O with PPS remap capability |
| Chân 55 | RD15 — Digital I/O with PPS remap capability |
| Chân 56 | VSS — Ground reference |
| Chân 57 | VDD — Positive supply (2.0V-3.6V) |
| Chân 58 | RE0 — Digital I/O / analog input |
| Chân 59 | RE1 — Digital I/O / analog input |
| Chân 60 | RE2 — Digital I/O / analog input |
| Chân 61 | RE3 — Digital I/O / analog input |
| Chân 62 | RE4 — Digital I/O / analog input |
| Chân 63 | RE5 — Digital I/O / analog input |
| Chân 64 | RE6 — Digital I/O / analog input |
Ứng dụng tiêu biểu
PIC24FJ96GA006T-I/PT phù hợp cho 6 Áp dụngs: Industrial Sensor Hubs, Portable Medical Devices, USB Peripherals, Graphical User Interfaces with LCD, Low-Power Wireless Sensor Hubs, Consumer Appliance Controllers.
Industrial Sensor Hubs
The PIC24FJ96GA006T-I/PT is well suited for industrial sensor hubs where multiple analog and digital sensors converge on a single processor. Its 10-bit ADC handles sensor signal conditioning while 96 KB Flash accommodates protocol stacks such as Modbus RTU or IO-Link. The wide 2.0-3.6 V supply range tolerates industrial 24 V rails after buck conversion. Low-power XLP modes suit battery-backed remote sensor nodes where sleep current is critical. PPS allows flexible PCB layout when routing SPI sensors.
Được đề xuất
Portable Medical Devices
In portable medical devices, the PIC24FJ96GA006T-I/PT offers the code space needed for FDA-class firmware while the 16 MIPS performance executes filtering algorithms at adequate sample rates. The 8 KB SRAM buffers sensor data between ADC reads and display updates. Industrial -40C to +85C temperature range covers clinical and home-use environments. With low sleep current, the device preserves battery life between measurements. USB device firmware fits in 96 KB Flash with stacks.
Được đề xuất
USB Peripherals
The PIC24FJ96GA006T-I/PT supports USB device applications via an external USB transceiver or the PIC24 USB-capable siblings, with 96 KB Flash accommodating USB stacks and HID/CDC class drivers. The 16 MIPS performance handles enumeration and bulk transfers with comfortable headroom. Dual UARTs and SPIs interface to wireless modules, sensors, or external storage. With 53 I/O pins, multiple endpoints (buttons, LEDs, displays) connect without expanders, simplifying BOM.
Được đề xuất
Graphical User Interfaces with LCD
For HMI panels driving segmented LCDs, the PIC24FJ96GA006T-I/PT integrates segmented LCD drivers in some family variants and provides PPS for flexible key-scan wiring. 96 KB Flash stores multi-language menus, font tables, and state machine code. The 32 MHz CPU refreshes displays smoothly while polling touch sensors and driving backlights via PWM. With 53 I/O pins, ample headroom exists for additional buttons and LED indicators.
Được đề xuất
Low-Power Wireless Sensor Hubs
The PIC24FJ96GA006T-I/PT serves as a low-power host for wireless sensor nodes with sub-GHz or BLE modules over UART/SPI. XLP deep-sleep with RTCC retention allows duty-cycled wake patterns that extend battery life to years. 96 KB Flash fits simple LoRaWAN or BLE beacon firmware profiles. Dual I2C/SPI/UART interfaces accommodate multiple sensors and radio modules simultaneously, while PPS reduces PCB routing complexity.
Được đề xuất
Consumer Appliance Controllers
In consumer appliance controllers such as coffee machines, washing machines, or smart kitchen devices, the PIC24FJ96GA006T-I/PT offers enough Flash for user-interface logic, sensor fusion, and motor-control algorithms. Its 16 MIPS performance handles PID loops for temperature or motor speed control. The 53 I/O pins connect directly to buttons, displays, relays, and TRIAC drivers, while PPS allows routing flexibility to simplify PCB layout.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ96GA006T-I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ64GA006T-I/PT | PIC24FJ128GA006T-I/PT | PIC24FJ96GA006-I/PT | PIC24FJ96GA006T-I/MR | PIC24FJ64GC006T-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Flash Memory | 96 KB | 64 KB | 128 KB | 96 KB | 96 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Max CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| I/O Pins | 53 | 53 | 53 | 53 | 53 | 53 |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Bảo phân biệt quan trọng
- 96 KB Flash in PIC24F family with XLP ultra-low-power technology (vsPIC24FJ64GA006T-I/PT)
- Drop-in upgrade path to 128 KB Flash (vsPIC24FJ128GA006T-I/PT)
- Tape & Reel packaging for high-volume assembly (vsPIC24FJ96GA006-I/PT)
Ghi chú thiết kế
Operate the PIC24FJ96GA006T-I/PT from a regulated 3.3 V supply within the 2.0 V-3.6 V range. Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair (multiple VDD pins exist on this 64-pin package). For battery applications, add a bulk 10 uF capacitor near the VDD pin to handle inrush during radio transmissions when peripherals are co-located.
Route the crystal traces (OSC1/OSC2) short and symmetric to minimize stray capacitance. Keep the trace length under 5 mm and surround them with a ground pour for noise immunity. If using the internal oscillator, leave OSC1/OSC2 unconnected or grounded to reduce EMI pickup. Place the ICSP programming pins (PGECx/PGEDx) on accessible test points for in-circuit programming.
Do not exceed 3.6 V on any pin or VDD - the PIC24FJ core is not 5 V tolerant. When migrating from PIC18 to PIC24F, ensure C code uses 16-bit aware types; default int is 16 bits on PIC24, but pointer and arithmetic behaviors differ. Always configure the Configuration bits (FOSC, FWDT, JTAG, etc.) in code to avoid debugger-locked or runaway-watched devices after reset.
Thông tin tuân thủ
RoHS and REACH compliance per Microchip product page. Industrial temperature grade -40C to +85C; not AEC-Q100 qualified (automotive).
