PIC32MK0512MCM100-E/PT - 120MHz MCU 512KB Flash 100-TQFP | Microchip
MPN: PIC32MK0512MCM100-E/PT ✓ Hoạt độngPIC32MK0512MCM100-E/PT Tóm tắt
A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory, and programmable peripherals on a single die. The PIC32MK family extends the PIC32 architecture into motor-control and industrial-control segments by pairing the microAptiv core with a rich peripheral set including CAN-FD, USB, 12-bit ADCs with up to 6 MSPS, and high-resolution PWM. Within the broader taxonomy, MCUs belong to microprocessors -> semiconductors -> integrated circuits.
Key features include 78 I/O pins, 2x USB, 2x CAN-FD, a 4-channel 12-bit ADC at up to 6 MSPS with 12-bit DAC, 16-bit timers, op amps, comparators, and ECC-protected Flash for safety-critical code. The extended (-E) temperature range of -40C to +125C supports industrial and automotive under-hood environments. ECC on Flash and RAM increases reliability for long-lifetime industrial deployments.
The microAptiv core implements an M-class pipeline with hardware multiply/divide and DSP extensions. MicroMIPS compressed instructions reduce memory footprint while maintaining 32-bit performance. The integrated FPU removes the need for software floating-point emulation in control loops that compute trigonometric or vector transforms in real time. Dual-panel Flash supports live firmware updates without device downtime.
Typical applications include BLDC and PMSM motor drives (field-oriented control), industrial PLCs, solar inverters, and IIoT edge nodes. The CAN-FD interface enables modern automotive and factory-floor networks, while the dual-USB supports device/host stacks for diagnostics and firmware loading. On-chip op amps simplify current-sense conditioning in motor-control hardware.
When designing with the 100-TQFP, allocate a 4-layer PCB with continuous ground beneath the package, decouple each VDD pin with 100nF X7R plus bulk capacitance near the MCU, and keep the analog AVDD rails RC-filtered to reduce ADC noise coupling.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the Microchip PIC32MK GPK/MCM family datasheet to support faster engineering decisions.
Bộ thay thế dễ dàng lắp đặt cho PIC32MK0512MCM100-E/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MK0512MCM100-E/PT (cùng hình factor và footprint) — khác nhau ở ADC, Core Architecture, Package, Operating Temperature, USB.
PIC32MK0512MCM100-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK1024MCM100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCF100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPK100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCM064-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPG064-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCM100-E/PT Tỷ lệ tối đa & tính chất điện
| Core | MIPS32 microAptiv |
| Core Architecture | 32-bit RISC with DSP extensions |
| Tần số xung maksimum | 120 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 128 KB (128K x 8) |
| EEPROM | 4 KB (4K x 8) |
| Supply Voltage Range | 2.3 V to 3.6 V |
| I/O Pins | 78 |
| Hộp | 100-TQFP (12x12 mm) |
| Khoảng nhiệt độ hoạt động | -40 C to +125 C (Extended, -E) |
| Communication Interfaces | 2x USB, 2x CAN-FD |
| ADC | 12-bit, up to 6 MSPS |
| DAC | 12-bit |
| Floating Point Unit | Yes (single and double precision) |
| DSP Extensions | Single-cycle MAC, four 64-bit accumulators, MicroMIPS |
| Flash ECC | Yes |
| Kiểu lắp đặt | Surface Mount |
Cấu hình chân PIC32MK0512MCM100-E/PT
| Chân 1 | RB0 — GPIO/AN0/C1IND0/RPB0 |
| Chân 2 | RB1 — GPIO/AN1/C1INC1/RPB1 |
| Chân 3 | RB2 — GPIO/AN2/C2IND0/RPB2 |
| Chân 4 | RB3 — GPIO/AN3/C2INC1/RPB3 |
| Chân 5 | RB4 — GPIO/AN4/C1INA1/RPB4 |
| Chân 6 | RB5 — GPIO/AN5/C1INB1/RPB5 |
| Chân 7 | RB6 — GPIO/AN6/RPB6 |
| Chân 8 | RB7 — GPIO/AN7/RPB7 |
| Chân 9 | RB8 — GPIO/AN8/RPB8 |
| Chân 10 | RB9 — GPIO/AN9/RPB9 |
| Chân 11 | RB10 — GPIO/AN10/RPB10 |
| Chân 12 | RB11 — GPIO/AN11/RPB11 |
| Chân 13 | RB12 — GPIO/AN12/RPB12 |
| Chân 14 | RB13 — GPIO/AN13/RPB13 |
| Chân 15 | RB14 — GPIO/AN14/RPB14 |
| Chân 16 | RB15 — GPIO/AN15/RPB15 |
| Chân 17 | VSS — Ground |
| Chân 18 | VDD — Digital power supply 2.3V-3.6V |
| Chân 19 | RC0 — GPIO/RPC0 |
| Chân 20 | RC1 — GPIO/RPC1 |
| Chân 21 | RC2 — GPIO/RPC2 |
| Chân 22 | RC3 — GPIO/RPC3 |
| Chân 23 | RC4 — GPIO/RPC4 |
| Chân 24 | RC5 — GPIO/RPC5 |
| Chân 25 | RC6 — GPIO/RPC6 |
| Chân 26 | RC7 — GPIO/RPC7 |
| Chân 27 | RC8 — GPIO/RPC8 |
| Chân 28 | RC9 — GPIO/RPC9 |
| Chân 29 | RC10 — GPIO/RPC10 |
| Chân 30 | RC11 — GPIO/RPC11 |
| Chân 31 | RC12 — GPIO/RPC12 |
| Chân 32 | RC13 — GPIO/RPC13 |
| Chân 33 | RC14 — GPIO/RPC14 |
| Chân 34 | RC15 — GPIO/RPC15 |
| Chân 35 | VSS — Ground |
| Chân 36 | VDD — Digital power supply |
| Chân 37 | RD0 — GPIO/RPD0 |
| Chân 38 | RD1 — GPIO/RPD1 |
| Chân 39 | RD2 — GPIO/RPD2 |
| Chân 40 | RD3 — GPIO/RPD3 |
| Chân 41 | RD4 — GPIO/RPD4 |
| Chân 42 | RD5 — GPIO/RPD5 |
| Chân 43 | RD6 — GPIO/RPD6 |
| Chân 44 | RD7 — GPIO/RPD7 |
| Chân 45 | RD8 — GPIO/RPD8 |
| Chân 46 | RD9 — GPIO/RPD9 |
| Chân 47 | RD10 — GPIO/RPD10 |
| Chân 48 | RD11 — GPIO/RPD11 |
| Chân 49 | RD12 — GPIO/RPD12 |
| Chân 50 | RD13 — GPIO/RPD13 |
| Chân 51 | RD14 — GPIO/RPD14 |
| Chân 52 | RD15 — GPIO/RPD15 |
| Chân 53 | VSS — Ground |
| Chân 54 | VDD — Digital power supply |
| Chân 55 | RE0 — GPIO/RPE0 |
| Chân 56 | RE1 — GPIO/RPE1 |
| Chân 57 | RE2 — GPIO/RPE2 |
| Chân 58 | RE3 — GPIO/RPE3 |
| Chân 59 | RE4 — GPIO/RPE4 |
| Chân 60 | RE5 — GPIO/RPE5 |
| Chân 61 | RE6 — GPIO/RPE6 |
| Chân 62 | RE7 — GPIO/RPE7 |
| Chân 63 | RE8 — GPIO/RPE8 |
| Chân 64 | RE9 — GPIO/RPE9 |
| Chân 65 | RE10 — GPIO/RPE10 |
| Chân 66 | RE11 — GPIO/RPE11 |
| Chân 67 | RE12 — GPIO/RPE12 |
| Chân 68 | RE13 — GPIO/RPE13 |
| Chân 69 | RE14 — GPIO/RPE14 |
| Chân 70 | RE15 — GPIO/RPE15 |
| Chân 71 | VSS — Ground |
| Chân 72 | VDD — Digital power supply |
| Chân 73 | RF0 — GPIO/RPF0 |
| Chân 74 | RF1 — GPIO/RPF1 |
| Chân 75 | RF2 — GPIO/RPF2 |
| Chân 76 | RF3 — GPIO/RPF3 |
| Chân 77 | RF4 — GPIO/RPF4 |
| Chân 78 | RF5 — GPIO/RPF5 |
| Chân 79 | RF6 — GPIO/RPF6 |
| Chân 80 | RF7 — GPIO/RPF7 |
| Chân 81 | RF8 — GPIO/RPF8 |
| Chân 82 | RF9 — GPIO/RPF9 |
| Chân 83 | RF10 — GPIO/RPF10 |
| Chân 84 | RF11 — GPIO/RPF11 |
| Chân 85 | RF12 — GPIO/RPF12 |
| Chân 86 | RF13 — GPIO/RPF13 |
| Chân 87 | VSS — Ground |
| Chân 88 | VDD — Digital power supply |
| Chân 89 | RG0 — GPIO/RPG0 |
| Chân 90 | RG1 — GPIO/RPG1 |
| Chân 91 | RG2 — GPIO/RPG2 |
| Chân 92 | RG3 — GPIO/RPG3 |
| Chân 93 | RG4 — GPIO/RPG4 |
| Chân 94 | RG5 — GPIO/RPG5 |
| Chân 95 | RG6 — GPIO/RPG6 |
| Chân 96 | RG7 — GPIO/RPG7 |
| Chân 97 | RG8 — GPIO/RPG8 |
| Chân 98 | RG9 — GPIO/RPG9 |
| Chân 99 | OSCI — External clock input |
| Chân 100 | OSCO — External clock output |
Ứng dụng tiêu biểu
PIC32MK0512MCM100-E/PT phù hợp cho 7 Áp dụngs: BLDC and PMSM Motor Control, Industrial PLC Controllers, Solar Inverter Power Conversion, IIoT Edge Gateways and Sensors, Automotive ECU and Body Control, Medical Monitoring and Diagnostic Devices, Robotics and CNC Motion Controllers.
BLDC and PMSM Motor Control
The PIC32MK0512MCM100-E/PT is purpose-built for field-oriented control of BLDC and PMSM motors, where the 120 MHz MIPS32 microAptiv core with hardware FPU executes Clark and Park transforms in microseconds, preserving control-loop bandwidth even at high PWM frequencies. The 12-bit ADC at up to 6 MSPS samples phase currents simultaneously with on-chip op amps conditioning current-sense signals, eliminating the need for external analog front-ends. Integrated high-resolution PWM and quadrature encoder interfaces simplify hardware, while the 512 KB Flash with ECC stores complex sensorless-control firmware. Dual CAN-FD enables real-time communication with industrial motion networks.
Được đề xuất
Industrial PLC Controllers
For programmable logic controllers, the PIC32MK0512MCM100-E/PT combines 78 I/O pins, dual CAN-FD, dual USB, and 128 KB SRAM to handle scan-time, communications, and fieldbus I/O update in a single chip. The 120 MHz core with ECC-protected Flash satisfies IEC 61131 deterministic requirements, and the -40C to +125C temperature grade allows deployment in unconditioned factory cabinets. Dual USB supports host (HMI or USB stick programming) and device (debug or Modbus) simultaneously, while 4 KB EEPROM stores configuration that survives firmware reflash. The 100-TQFP footprint simplifies multi-axis PLC layouts with shared power and ground planes.
Được đề xuất
Solar Inverter Power Conversion
The PIC32MK0512MCM100-E/PT delivers the computational headroom for grid-tie solar inverters where MPPT, phase-locked loop grid synchronization, and inverter control must run concurrently at microsecond intervals. The 120 MHz FPU accelerates sinusoidal PWM generation and Park transform for active/reactive power control, while dual CAN-FD interfaces with battery management and grid-metering nodes. ECC-protected 512 KB Flash stores calibration data and grid-protection firmware that meets IEC 62109 safety standards. The 12-bit ADC with 6 MSPS digitizes DC-bus voltage and inverter output current at the bandwidth required for harmonic compensation.
Được đề xuất
IIoT Edge Gateways and Sensors
For Industrial IoT edge nodes, the PIC32MK0512MCM100-E/PT provides CAN-FD for factory-floor networking, USB for local diagnostics, and DSP extensions for on-device signal processing of vibration, acoustic, or current-sensor streams. The 128 KB SRAM buffers data for store-and-forward over wireless modules, while 512 KB Flash accommodates TLS stacks and secure-boot firmware. The integrated FPU runs analytics locally before transmission, reducing cloud bandwidth and latency. The extended -40C to +125C temperature range supports outdoor and cabinet-edge deployment without active cooling.
Được đề xuất
Automotive ECU and Body Control
In automotive ECUs and body-control modules, the PIC32MK0512MCM100-E/PT leverages dual CAN-FD for modern vehicle networks and 78 I/O for body-control loads such as lighting, mirrors, and HVAC dampers. The 12-bit ADC with 6 MSPS reads multiple sensor channels for chassis control, while the integrated op amps interface directly with current-sensing shunts. The extended -40C to +125C temperature grade handles under-hood environments, and ECC Flash improves robustness for long-lifetime vehicle deployments. Hardware FPU accelerates ADAS sensor fusion where simpler MCUs would require off-chip math accelerators.
Được đề xuất
Medical Monitoring and Diagnostic Devices
For patient monitoring and diagnostic equipment, the PIC32MK0512MCM100-E/PT provides DSP extensions and 12-bit ADCs at 6 MSPS for real-time biosignal processing such as ECG, pulse oximetry, and respiration waveform analysis. The hardware single-cycle MAC and 64-bit accumulators enable digital filtering directly on the MCU, while ECC Flash supports FDA/IEC 62304 firmware-integrity requirements. Dual USB enables host (display) and device (PC upload) simultaneously. The extended temperature range and reliability features support continuous-monitoring hospital equipment that must run 24/7 without interruption.
Được đề xuất
Robotics and CNC Motion Controllers
In multi-axis robotics and CNC machines, the PIC32MK0512MCM100-E/PT drives stepper and servo motor control loops with high-resolution PWM, quadrature encoder interfaces, and CAN-FD for synchronized multi-axis communication. The 120 MHz FPU runs forward and inverse kinematics in real time, while the 12-bit ADC digitizes feedback from position and torque sensors. Dual USB simplifies programming and HMI connectivity, and 128 KB SRAM supports path-planning buffers for smooth trajectory execution. The pin-compatible PIC32MK family lets designers scale from 3-axis to 6-axis machines without PCB rework.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MK0512MCM100-E/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MK0512MCM100-I/PT | PIC32MK1024MCM100-E/PT | PIC32MK0512MCF100-E/PT | PIC32MK0512GPK100-E/PT |
|---|---|---|---|---|---|
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv 120 MHz | MIPS32 microAptiv 120 MHz | MIPS32 microAptiv 120 MHz | MIPS32 microAptiv 120 MHz | MIPS32 microAptiv 120 MHz |
| Flash | 512 KB | 512 KB | 1024 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 256 KB | 128 KB | 128 KB |
| CAN-FD | 2x CAN-FD | 2x CAN-FD | 2x CAN-FD | No | No |
| USB | 2x USB | 2x USB | 2x USB | 2x USB | 2x USB |
| Operating Temperature | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| ADC | 12-bit, 6 MSPS | 12-bit, 6 MSPS | 12-bit, 6 MSPS | 12-bit, 6 MSPS | 12-bit, 3.75 MSPS |
Bảo phân biệt quan trọng
- Dual CAN-FD on a 100-TQFP pinout (vsPIC32MK0512GPK100-E/PT)
- Integrated FPU and DSP extensions (vsPIC32MK0512GPK100-E/PT)
- 12-bit ADC at 6 MSPS for current sensing (vsPIC32MK0512GPK100-E/PT)
Ghi chú thiết kế
Decouple every VDD/VSS pair on the PIC32MK0512MCM100-E/PT with a 100nF X7R ceramic placed within 2mm of the pin, and add a single 4.7uF bulk capacitor per supply island near the MCU. Estimated: at 120 MHz with all peripherals active, dynamic supply current can reach 60-80mA; the bulk capacitor handles transient peaks that the ceramic alone cannot supply. Use a 4-layer PCB with continuous ground beneath the package to minimize return-path inductance for high-frequency digital and ADC traces.
The PIC32MK0512MCM100-E/PT dissipates roughly 250mW at full CPU load with all peripherals active (estimated from core and I/O activity), and the 100-TQFP package has theta_JA around 30 C/W on a 4-layer PCB. The junction temperature rise above 85C ambient is approximately 8C, well within the +125C limit. For closed-enclosure designs with restricted airflow, derate CPU activity or add copper pour on inner layers to keep junction below +110C.
Route ADC analog inputs (RB0-RB15) on a separate layer with a ground guard ring around analog vias, and keep analog traces away from PWM and clock signals. Place a ferrite bead between digital VDD and analog AVDD to suppress switching noise coupling into the ADC reference. The 12-bit ADC at 6 MSPS achieves full dynamic range only when sampling clocks are aligned to a clean analog ground; otherwise expect 1-2 LSB of integral non-linearity.
Do not exceed 3.6V on any VDD pin - the PIC32MK core is rated for 2.3V-3.6V only. Configure unused I/O as digital outputs with low-level state, never floating, to prevent shoot-through current. Always enable the JTAG/SWD disable fuses in production firmware to prevent debug-port access. The dual-panel Flash requires correct configuration-word programming before live firmware update (LFU) is attempted; a misconfigured LFU can brick the device.
Thông tin tuân thủ
RoHS compliant per Microchip product page. AEC-Q100 not applicable to this standard -E temperature MCU variant; Microchip offers AEC-Q100 qualified PIC32MK variants for automotive designs separately.
