PIC32MZ1024ECG100-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100
MPN: PIC32MZ1024ECG100-I/PT ✗ Cuối đờiPIC32MZ1024ECG100-I/PT Tóm tắt
A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (Flash), working memory (RAM), and configurable peripherals. PIC32MZ EC devices target networked and graphically rich embedded products, sitting in the hierarchy PIC32MZ EC -> PIC32MZ family -> PIC32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with smaller 8/16-bit MCUs, PIC32MZ EC parts deliver multi-MIPS processing, large memory, and high-bandwidth peripherals required for IoT gateways and HMI applications.
Key features include the MIPS32 microAptiv core with DSP instructions, hardware cryptographic accelerators, a 12-bit ADC up to 18 Msps, multiple timers and output compare/PWM channels, and a 10-bit/1 Msps ADC capability. The dual-panel Flash architecture enables fail-safe firmware updates while the application continues running, simplifying IEC 60730 Class B functional-safety certification in industrial designs.
The IC supports supply voltages from 2.2V to 3.6V with on-chip LDO regulators, an integrated high-precision oscillator, and a comprehensive DMA engine that offloads data movement from the CPU. Operating temperature range is -40C to +85C for the -I industrial grade. The TQFP-100 (12x12 mm) package gives generous board-routing headroom and good thermal performance for hand-soldering and rework in prototyping.
Typical applications include industrial IoT gateways, Ethernet-connected motor drives, building automation controllers, automotive infotainment and telematics HMIs, and graphics-touchscreen human-machine interfaces. The combination of Ethernet, HS USB and large Flash also suits point-of-sale terminals, multi-protocol sensor hubs, and edge-computing nodes.
When designing with the PIC32MZ1024ECG100-I/PT, allocate at least 4-layer PCB stack-up for the Ethernet PHY interface, place the 12 MHz primary crystal within 8 mm of the OSCI/OSCO pins, and follow the live-update dual-image partitioning scheme documented in the device family reference manual to enable fail-safe over-the-air (OTA) firmware upgrades.
This page consolidates distributor pricing, qualified drop-in alternatives, and application-oriented design notes beyond what appears on a stock product listing, helping engineers evaluate the PIC32MZ1024ECG100-I/PT for high-performance, connectivity-rich embedded designs.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ1024ECG100-I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ1024ECG100-I/PT (cùng hình factor và footprint) — khác nhau ở ADC, Package, Core Architecture, Ethernet, USB.
PIC32MZ1024ECG100T-I/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024ECG100-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024ECG100-E/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024ECG100-V/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024EFG100-I/PT
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024ECG100-I/PT Tỷ lệ tối đa & tính chất điện
| Manufacturer | Microchip Technology |
| Series | PIC32MZ EC |
| Core | MIPS32 microAptiv |
| Core Architecture | 32-bit RISC |
| Maximum CPU Speed | 200 MHz |
| Program Memory (Flash) | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Operating Voltage Range | 2.2 V to 3.6 V |
| Khoảng nhiệt độ hoạt động | -40 C to +85 C (Industrial) |
| Hộp | 100-pin TQFP (12x12 mm) |
| Kiểu lắp đặt | Surface Mount |
| I/O Pins | 78 |
| Communication Interfaces | Ethernet, HS USB 2.0, CAN, UART, SPI, I2C, I2S, SQI |
| ADC | 12-bit, up to 18 Msps |
| DMA Channels | 32 |
| Timers | 9 x 16-bit / 5 x 32-bit |
| PWM Channels | 9 output compare / 9 PWM |
| Cryptography | Hardware AES, RNG, SHA |
| Performance | 330 DMIPS / 3.28 CoreMark/MHz |
| Cấp MSL | 3 (168 hours) |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Kiểu lắp đặt | SMD/SMT |
Cấu hình chân PIC32MZ1024ECG100-I/PT
| Chân 1 | RC12 — General purpose I/O / port pin |
| Chân 2 | RC15 — General purpose I/O / port pin |
| Chân 3 | RD8 — General purpose I/O / port pin |
| Chân 4 | AVDD — Analog supply voltage |
| Chân 5 | AVSS — Analog ground |
| Chân 6 | OSCI — Primary crystal oscillator input |
| Chân 7 | OSCO — Primary crystal oscillator output |
| Chân 8 | VDD — Digital supply voltage |
| Chân 9 | VSS — Digital ground |
| Chân 10 | RB0 — General purpose I/O / PGEC1 |
| Chân 11 | RB1 — General purpose I/O / PGED1 |
| Chân 12 | RB2 — General purpose I/O / AN0 |
| Chân 13 | RB3 — General purpose I/O / AN1 |
| Chân 14 | RB4 — General purpose I/O / AN2 |
| Chân 15 | RB5 — General purpose I/O / AN3 |
| Chân 16 | RB6 — General purpose I/O / AN4 |
| Chân 17 | RB7 — General purpose I/O / AN5 |
| Chân 18 | RB8 — General purpose I/O / AN6 |
| Chân 19 | RB9 — General purpose I/O / AN7 |
| Chân 20 | RB10 — General purpose I/O / AN8 |
| Chân 21 | RB11 — General purpose I/O / AN9 |
| Chân 22 | RB12 — General purpose I/O / AN10 |
| Chân 23 | RB13 — General purpose I/O / AN11 |
| Chân 24 | RB14 — General purpose I/O / AN12 |
| Chân 25 | RB15 — General purpose I/O / AN13 |
| Chân 26 | VDD — Digital supply voltage |
| Chân 27 | VSS — Digital ground |
| Chân 28 | RC0 — General purpose I/O / AN14 |
| Chân 29 | RC1 — General purpose I/O / AN15 |
| Chân 30 | RC2 — General purpose I/O / AN16 |
| Chân 31 | RC3 — General purpose I/O / AN17 |
| Chân 32 | RC4 — General purpose I/O |
| Chân 33 | RC5 — General purpose I/O |
| Chân 34 | RC6 — General purpose I/O |
| Chân 35 | RC7 — General purpose I/O |
| Chân 36 | RC8 — General purpose I/O |
| Chân 37 | RC9 — General purpose I/O |
| Chân 38 | RC10 — General purpose I/O |
| Chân 39 | RC11 — General purpose I/O |
| Chân 40 | VDD — Digital supply voltage |
| Chân 41 | VSS — Digital ground |
| Chân 42 | RD0 — General purpose I/O |
| Chân 43 | RD1 — General purpose I/O |
| Chân 44 | RD2 — General purpose I/O |
| Chân 45 | RD3 — General purpose I/O |
| Chân 46 | RD4 — General purpose I/O |
| Chân 47 | RD5 — General purpose I/O |
| Chân 48 | RD6 — General purpose I/O |
| Chân 49 | RD7 — General purpose I/O |
| Chân 50 | RD9 — General purpose I/O |
| Chân 51 | RD10 — General purpose I/O |
| Chân 52 | RD11 — General purpose I/O |
| Chân 53 | RD12 — General purpose I/O |
| Chân 54 | RD13 — General purpose I/O |
| Chân 55 | RD14 — General purpose I/O |
| Chân 56 | RD15 — General purpose I/O |
| Chân 57 | VDD — Digital supply voltage |
| Chân 58 | VSS — Digital ground |
| Chân 59 | RE0 — General purpose I/O |
| Chân 60 | RE1 — General purpose I/O |
| Chân 61 | RE2 — General purpose I/O |
| Chân 62 | RE3 — General purpose I/O |
| Chân 63 | RE4 — General purpose I/O |
| Chân 64 | RE5 — General purpose I/O |
| Chân 65 | RE6 — General purpose I/O |
| Chân 66 | RE7 — General purpose I/O |
| Chân 67 | RF0 — General purpose I/O |
| Chân 68 | RF1 — General purpose I/O |
| Chân 69 | RF2 — General purpose I/O |
| Chân 70 | RF3 — General purpose I/O |
| Chân 71 | RF4 — General purpose I/O |
| Chân 72 | RF5 — General purpose I/O |
| Chân 73 | RF6 — General purpose I/O |
| Chân 74 | RF7 — General purpose I/O |
| Chân 75 | RF8 — General purpose I/O |
| Chân 76 | VDD — Digital supply voltage |
| Chân 77 | VSS — Digital ground |
| Chân 78 | RG0 — General purpose I/O |
| Chân 79 | RG1 — General purpose I/O |
| Chân 80 | RG2 — General purpose I/O |
| Chân 81 | RG3 — General purpose I/O |
| Chân 82 | RG4 — General purpose I/O |
| Chân 83 | RG5 — General purpose I/O |
| Chân 84 | RG6 — General purpose I/O |
| Chân 85 | RG7 — General purpose I/O |
| Chân 86 | RG8 — General purpose I/O |
| Chân 87 | RG9 — General purpose I/O |
| Chân 88 | VDD — Digital supply voltage |
| Chân 89 | VSS — Digital ground |
| Chân 90 | RH0 — General purpose I/O |
| Chân 91 | RH1 — General purpose I/O |
| Chân 92 | RH2 — General purpose I/O |
| Chân 93 | RH3 — General purpose I/O |
| Chân 94 | RH4 — General purpose I/O |
| Chân 95 | RH5 — General purpose I/O |
| Chân 96 | RH6 — General purpose I/O |
| Chân 97 | RH7 — General purpose I/O |
| Chân 98 | RH8 — General purpose I/O |
| Chân 99 | RH9 — General purpose I/O |
| Chân 100 | MCLR — Master clear (reset) input |
Ứng dụng tiêu biểu
PIC32MZ1024ECG100-I/PT phù hợp cho 6 Áp dụngs: Industrial IoT Gateway, Building Automation Controller, Automotive Infotainment HMI, Graphics and Touchscreen HMI, Point-of-Sale (POS) Terminal, Ethernet-Connected Motor Drive.
Industrial IoT Gateway
The PIC32MZ1024ECG100-I/PT fits industrial IoT gateways because it integrates a 10/100 Ethernet MAC, HS USB 2.0 host/device/OTG, dual CAN 2.0b and multiple UART/SPI/I2C on a single chip. At 200 MHz and 1 MB Flash / 512 KB SRAM it can run TCP/IP stacks, MQTT, and on-device analytics concurrently while supporting over-the-air firmware updates via the dual-panel live-update Flash, a key requirement for connected industrial equipment operating in the field.
Được đề xuất
Building Automation Controller
For HVAC and building-automation controllers the PIC32MZ1024ECG100-I/PT delivers the connectivity (Ethernet, CAN, RS-485 over UART) and processing headroom for BACnet or Modbus stacks on top of regulation loops. The 12-bit 18 Msps ADC samples multiple sensor channels directly, while the 9 PWM channels drive fan speed, damper actuators and triac-fired heater elements. Industrial -40C to +85C operation and 512 KB SRAM simplify multi-protocol gateway designs.
Được đề xuất
Automotive Infotainment HMI
The 200 MHz MIPS32 core, 1 MB Flash and 78 I/O pins make the PIC32MZ1024ECG100-I/PT a fit for automotive HMI / infotainment head units driving TFT displays with touch overlays. HS USB 2.0 enables media and phone-mirroring connections, I2S supports external audio codecs, and the 12-bit ADC handles backlight and temperature monitoring. For higher temperature (-40C to +105C automotive) designs, the same-family PIC32MZ1024ECG100-V/PT keeps the same footprint.
Được đề xuất
Graphics and Touchscreen HMI
The PIC32MZ1024ECG100-I/PT's 200 MHz performance, 1 MB Flash and 512 KB SRAM allow it to render direct-drive TFT-LCD or drive external graphics controllers with rich HMI assets. Its integrated SQI (Serial Quad Interface) supports high-throughput external Flash for asset storage and screen buffering, while I2S routes digital audio. Combined with capacitive-touch controllers, it delivers responsive industrial-panel UIs at modest cost.
Được đề xuất
Point-of-Sale (POS) Terminal
POS terminals benefit from the PIC32MZ1024ECG100-I/PT's Ethernet for LAN connectivity, USB host for keyboards/scanners, hardware AES/SHA for payment encryption, and 1 MB Flash to host application code plus customer-facing UI logic. The 78 I/O pins easily handle printers, NFC readers, displays and keypads from a single MCU, and the dual-panel Flash simplifies regulatory firmware-update certification.
Được đề xuất
Ethernet-Connected Motor Drive
The PIC32MZ1024ECG100-I/PT is well suited for networked motor drives because it pairs 9 PWM channels and a 12-bit 18 Msps ADC for field-oriented control (FOC) with an integrated Ethernet MAC for industrial networking (EtherNet/IP, Modbus TCP). 512 KB SRAM accommodates state estimators and communication buffers without external memory, while 32 DMA channels offload time-critical sample transfers from the CPU.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ1024ECG100-I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ1024ECG100T-I/PT | PIC32MZ1024ECG100-I/PF | PIC32MZ1024ECG100-E/PT | PIC32MZ1024ECG100-V/PT | PIC32MZ1024EFG100-I/PT |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (12x12 mm) | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (14x14 mm) | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 180 MHz | 252 MHz |
| Program Memory (Flash) | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Range | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +105C (Automotive) | -40C to +85C (Industrial) |
| FPU | No | No | No | No | No | Yes (double-precision) |
| Lifecycle Status | NRND | NRND | NRND | Active | Active | Active |
| Approx. Unit Price (USD, 100+ qty) | ~$14.50 | ~$14.50 | ~$14.50 | ~$16.00 | ~$15.50 | ~$15.00 |
Bảo phân biệt quan trọng
- Dual-panel Flash with live update (vsPIC32MX795F512L-80I/PT)
- On-chip Ethernet MAC and HS USB 2.0 (vsPIC32MX575F512L-80I/PT)
- 12-bit 18 Msps ADC (vsPIC32MX764F128L-I/PT)
Ghi chú thiết kế
Estimated: at 200 MHz with all peripherals active, the PIC32MZ1024ECG100-I/PT typical core current is roughly 80-100 mA from VDD (2.2V-3.6V). Place one 100 nF decoupling capacitor within 3 mm of every VDD/VSS pair and one bulk 4.7 uF ceramic on each VDD rail. Place the AVDD pin decoupling (10 uF + 100 nF) close to the analog supply to keep ADC SNR within datasheet specs.
Route the Ethernet MII/RMII signals on an inner layer with ground reference, keeping pair-to-pair length mismatch under 50 mil for the 25 MHz RMII reference clock and 100 ohm differential impedance for MII signals. Place the 12 MHz crystal within 8 mm of OSCI/OSCO (pins 6-7), guard-ring the crystal traces with ground, and avoid routing signals under the crystal. Per IEEE 802.3, isolate analog ground (AVSS) from digital ground (VSS) with a single-point connection under the IC.
Do not omit the MCLR pull-up on pin 100; an unconfigured MCLR causes the part to fail programming via ICSP. When using the dual-panel live-update feature, partition the Flash such that the bootloader occupies a fixed region of panel 0 - misallocation causes OTA corruption. The HS USB 2.0 ULPI/PHY interface requires a 48 MHz reference clock on REFO; without it the USB enumeration fails silently. Finally, expose only pins needed to external traces - the TQFP-100 12x12 mm body has fine 0.5 mm pitch leads vulnerable to solder bridges during reflow.
Estimated: the TQFP-100 12x12 mm package has a typical theta_JA of approximately 45 C/W on a 4-layer JEDEC test board with no airflow. At 1.0 W dissipation this yields a 45 C junction-temperature rise above ambient; at 85 C ambient the junction reaches 130 C, within the -I industrial 85 C spec. For continuous full-speed operation in a sealed enclosure, derate peripheral use, add a copper thermal pad under the exposed die attach area, or consider migrating to the -E variant rated to 125 C.
Thông tin tuân thủ
RoHS and lead-free per Microchip ordering information. Standard -I industrial grade is not AEC-Q100 qualified - choose /V variant for AEC-Q100 Grade 2 automotive. Halogen-free status not explicitly published; default to unknown.
