R5F10WMDAFA#30 - 24MHz 48KB LCD MCU | Renesas | 80-LQFP
MPN: R5F10WMDAFA#30 ✓ Hoạt độngR5F10WMDAFA#30 Tóm tắt
A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripherals, and communication interfaces on one semiconductor die. The RL78/L13 belongs to Renesas Electronics' RL78 family, a hierarchy of low-power embedded controllers used for battery-powered, industrial, appliance, and display-oriented equipment. Its 16-bit architecture, LCD resources, and low-power operating characteristics allow one device to control a display while also handling buttons, sensors, timers, and system logic.
The R5F10WMDAFA#30 provides 48 KB of flash program memory, 2 KB of RAM, a 24 MHz operating frequency, and an operating temperature range of -40 °C to +85 °C. Its segment LCD driver supports three voltage-generation approaches: external resistance division, capacitive split, and internal voltage boost. This flexibility lets designers match the display-driver configuration to the panel characteristics, available components, power budget, and operating environment.
The 80-LQFP package exposes a substantially larger pin count than smaller microcontroller packages, providing access to segment outputs, general-purpose I/O, analog inputs, timers, and communication functions. This makes the device practical for multifunction instruments that need both a dedicated LCD interface and conventional embedded-control peripherals. The package dimensions and pin arrangement must be matched exactly when designing or updating a PCB.
Typical applications include household appliance panels, kitchen scales, thermometers, multimeters, process meters, laboratory instruments, portable measurement equipment, and compact industrial control panels. In these systems, the microcontroller can scan LCD segments, debounce operator controls, acquire measurements, perform calculations, drive indicators, and manage low-power operating states.
The primary design consideration is LCD and power planning. Select the voltage-generation method and external components according to the display manufacturer's electrical requirements, and confirm the operating temperature range against the target product environment. PCB layouts should preserve the land pattern and pin assignments of the 80-LQFP package, provide adequate decoupling near the supply pins, and keep sensitive analog and display paths separated from noisy switching nodes.
This page consolidates the manufacturer product information, distributor identification, family-level alternatives, application guidance, and engineering design notes into one engineering reference for evaluating the R5F10WMDAFA#30 in new and existing LCD-based designs.
Bộ thay thế dễ dàng lắp đặt cho R5F10WMDAFA#30 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
R5F10WMDAFA#U0
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F10WLD8CFA#U0
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F10WMD8CFA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F10WED8CFA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F10WAD8CFA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F10WMDAFA#30 Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit flash microcontroller |
| Product Family | RL78/L13 |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 48 KB |
| RAM | 2 KB |
| CPU Word Size | 16 bit |
| Hộp | 80-LQFP (14 x 14 mm) |
| Kiểu lắp đặt | Surface mount |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| LCD Controller | Integrated segment LCD driver |
| LCD Voltage Generation Method 1 | External resistance division |
| LCD Voltage Generation Method 2 | Capacitive split |
| LCD Voltage Generation Method 3 | Internal voltage boost |
Hướng dẫn cấu hình chân R5F10WMDAFA#30 80-lqfp (14 x 14 mm)
Cấu hình chân cho R5F10WMDAFA#30 (80-lqfp (14 x 14 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho R5F10WMDAFA#30.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
R5F10WMDAFA#30 phù hợp cho 6 Áp dụngs: Home Appliance LCD Panels, Digital Kitchen Scales, Thermometers and Environmental Meters, Digital Multimeters, Process and Industrial Panel Meters, Portable Laboratory Instruments.
Home Appliance LCD Panels
The R5F10WMDAFA#30 fits home-appliance panels that combine a segment LCD with buttons, relays, sensors, and low-power control logic. Its 24 MHz RL78/L13 core provides useful control bandwidth, while 48 KB of flash accommodates display routines, menus, calibration values, and appliance state management. The integrated segment LCD controller and three voltage-generation methods—external resistance division, capacitive split, and internal voltage boost—provide design flexibility across different glass-panel electrical requirements. Low-power operation is particularly valuable in countertop and portable appliances because the controller can avoid continuously driving an external display driver when panel demand permits.
Được đề xuất
Digital Kitchen Scales
A digital kitchen scale can use the R5F10WMDAFA#30 to acquire a load-cell signal, process the measurement, drive a segment LCD, and manage tare and unit-selection inputs. The 48 KB flash provides room for calibration coefficients, display formatting, button handling, and low-power routines, while 2 KB of RAM supports real-time sampling and control work. Its three LCD bias-generation options allow the display design to be adapted to the selected panel. Power dissipation and display visibility should be evaluated together because LED backlighting can dominate the energy budget even when the microcontroller and LCD operate efficiently.
Được đề xuất
Thermometers and Environmental Meters
The R5F10WMDAFA#30 is appropriate for thermometers, humidity meters, and environmental instruments that present measurements through a segment LCD. Its 16-bit RL78/L13 architecture can process sensor data while handling display refresh, min-max records, alarms, and user inputs. The 24 MHz operating class supports responsive control without requiring a higher-power application processor. Designers should confirm the device's analog input and timing specifications against the selected sensor, then choose the LCD voltage-generation method that meets panel visibility requirements with acceptable current consumption.
Được đề xuất
Digital Multimeters
In a handheld digital multimeter, the R5F10WMDAFA#30 can control range selection, process measurements, drive a numeric segment display, and supervise battery status. The 48 KB flash is useful for calibration tables, measurement algorithms, and multiple operating modes, while the integrated LCD controller reduces the number of external display-support components. The 80-LQFP package provides access to a broad pin set for analog and control functions. The final design must verify input protection, ADC performance, reference accuracy, and battery-current behavior against the metrology and safety requirements of the instrument.
Được đề xuất
Process and Industrial Panel Meters
The R5F10WMDAFA#30 can serve as the controller for a compact process meter that accepts an industrial sensor signal and displays pressure, flow, temperature, or level. Its 24 MHz processing capability supports control logic around the display, while 48 KB flash provides space for configuration, calibration, and diagnostics. The -40 °C to +85 °C operating range covers many industrial environments, although enclosure temperature, electromagnetic interference, and power-supply quality must also be considered. Isolated signal conditioning and surge protection remain external design responsibilities.
Được đề xuất
Portable Laboratory Instruments
Portable laboratory instruments often need a readable display, accurate acquisition, local controls, and low standby consumption. The R5F10WMDAFA#30 combines a 16-bit RL78/L13 core, 48 KB flash, and an integrated segment LCD controller in one device, allowing it to manage both measurement control and presentation. Its flexible LCD drive architecture supports panels using resistance division, capacitive split, or internal boost. The component is best suited to instruments with moderate control complexity; applications requiring large graphical displays, high-speed data acquisition, or extensive connectivity should evaluate a higher-end microcontroller family instead.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho R5F10WMDAFA#30 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | R5F10WMDAFA#U0 | R5F10WLD8CFA#U0 | R5F10WMD8CFA | R5F10WED8CFA | R5F10WAD8CFA |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) | 80-LQFP (14 x 14 mm) |
| Product Family | RL78/L13 | RL78/L13 | RL78/L13 | RL78/L13 | RL78/L13 | RL78/L13 |
| CPU Word Size | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 48 KB | 48 KB | 64 KB | 48 KB | 32 KB | 16 KB |
| LCD Controller | Integrated segment LCD driver | Integrated segment LCD driver | Integrated segment LCD driver | Integrated segment LCD driver | Integrated segment LCD driver | Integrated segment LCD driver |
Bảo phân biệt quan trọng
- Provides the target 48 KB flash density without reducing application-code capacity (vsR5F10WAD8CFA)
- Matches the established 80-LQFP 14 x 14 mm mechanical footprint (vsR5F10WED8CFA)
- Identifies a higher-memory option when storage growth is required (vsR5F10WMDAFA#U0)
Ghi chú thiết kế
Treat the R5F10WMDAFA#30 as an 80-pin LQFP layout rather than a generic 64-pin package. Before releasing artwork, compare every land, pin number, and exposed or thermal pad against the Renesas package drawing. Place the supply decoupling network at the pins specified by the hardware manual, preserve the recommended via arrangement, and maintain adequate spacing between LCD outputs and sensitive analog inputs.
Choose the LCD voltage-generation method by comparing panel drive voltage, contrast, current consumption, and component count across external resistance division, capacitive split, and internal voltage boost. Include LCD current in the complete power budget rather than evaluating only controller current. For battery-powered products, verify the refresh strategy and sleep behavior because segment-drive settings and backlighting can dominate standby and average energy use.
Keep the LCD glass connector and segment traces away from switching nodes, relays, high-current LED drivers, and inductive components. Route analog sensor inputs using short traces, maintain a quiet ground reference, and keep high-current return paths from crossing the measurement ground area. Validate worst-case contrast and measurement stability in the assembled enclosure because display noise, backlight return current, and external power-converter harmonics can affect a working bench design.
Do not substitute an RL78/L13 variant solely because it has the same 24 MHz clock and 80-LQFP outline. Confirm pin compatibility, flash capacity, RAM, LCD segment allocation, analog resources, temperature grade, and ordering suffix against the manufacturer documentation. The R5F10WAD8CFA and R5F10WED8CFA alternatives have less flash than the 48 KB target, so either can create an application-code capacity issue even when the footprint appears compatible.
Thông tin tuân thủ
The device is a general-purpose industrial-temperature microcontroller rather than an automotive-qualified AEC-Q100 option. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information.