Skyworks Solutions

SI3200-G-FS - 100V Dual-Channel SLIC Interface IC | Skyworks Solutions

MPN: SI3200-G-FS ✓ Hoạt động
100 V Vdss 45 mA Id 6-pin SMD package Package
MOQ: 1 |

SI3200-G-FS Tóm tắt

The Skyworks Solutions SI3200-G-FS is a dual-channel Subscriber Line Interface Concept (SLIC) integrated circuit intended for telecom line-card and voice-access equipment. The verified product information identifies a 100 V linefeed interface, 3.3 V operation, approximately 45 mA device current, 63 dB channel performance, and a surface-mount package. The distributor listings identify the device as a telecom interface IC and emphasize that two units are used for a dual-channel chipset.

A Subscriber Line Interface Concept, or SLIC, is an interface IC that sits between a telephone line and the digital voice-processing portion of a communications system. It handles linefeed-related functions and supports analog voice-channel connectivity in access equipment. In the power hierarchy, the SI3200-G-FS belongs to the semiconductor class, then to integrated circuits, then to interface ICs, with the narrower application category of telecom linefeed interfaces.

The SI3200-G-FS is identified as a 2-channel SLIC and is rated for 100 V linefeed operation. The documented 3.3 V supply and 45 mA operating-current figure make it suitable for low-voltage telecom equipment designs in which the line interface must operate from a protected or isolated supply architecture. Its 63 dB specification is a key channel-performance figure for evaluating signal-chain behavior, although the complete system noise and distortion budget also depends on the external linefeed network, protection devices, and the voice codec.

The available package information is not fully consistent across listings. DigiKey describes the related SI3200-G-FSR as a 16-SOIC, while the SI3200-G-FS search result describes a 6-pin SMD arrangement. Because the exact pin assignments for the target package are not published in the manufacturer material included here, the pinout is left unset and the package diagram should be confirmed against the final device drawing before PCB layout.

Typical applications include two-channel voice access, telephone line interface cards, subscriber line access concentrators, and telecom equipment using a dual-chipset SLIC architecture. The 100 V linefeed rating is particularly relevant to designs where the interface must withstand the voltage environment associated with analog telephone lines.

For a new layout, begin with the manufacturer datasheet pin description and the linefeed reference circuit. Confirm the package drawing, exposed or lead configuration, protection network, supply sequencing, and decoupling requirements before committing copper. This page consolidates the verified electrical highlights, sourcing information, package cautions, and practical design guidance for engineers evaluating the SI3200-G-FS.

Bộ thay thế dễ dàng lắp đặt cho SI3200-G-FS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3200-G-FS (cùng hình factor và footprint) — khác nhau ở Lead-Free Status, Package, Product Type, Supply Voltage.

Skyworks Solutions
Lead-Free Status: Lead-free
Package: 16-pin SOIC
Product Type: Subscriber Line Interface Concept (SLIC) linefeed interface IC
So sánh với SI3200-G-FS →

SI3200-G-FSR

✅ Drop-In
📦 16-SOIC
The listed FSR variant is identified as a 16-SOIC SLIC/CODEC; the target summary states 6-pin SMD, so the package descriptions differ and exact pin compatibility requires confirmation.

📋 Tham chiếu thay thế (không có trong danh mục)

SI3200-FS

✅ Drop-In
Skyworks Solutions
📦 16-SOIC
Subscriber Line Interface Concept (SLIC) linefeed interface IC · 2 · GCI, PCM, SPI · 3.3 V, 5 V · 110 uA · 941 mW · -40 °C to +85 °C · 16-pin SOIC

Liên hệ để biết giá

Xem tài liệu →

SI3200-G-FS Thông số kỹ thuật

Product Type Subscriber Line Interface Concept (SLIC) IC
Channel Count 2 channels
Linefeed Voltage Rating 100 V
Operating Current 45 mA
Điện áp cung cấp 3.3 V
Channel Performance 63 dB
Device Category Telecom Interface IC
Chức năng Dual-channel linefeed interface
Linefeed Type Subscriber Line Interface Concept (SLIC)
Hộp 6-pin SMD package
Related Listed Package 16-SOIC for SI3200-G-FSR
Lead-Free Status Lead-free device
Dual-Channel Architecture Two units required for a dual-channel chipset
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân SI3200-G-FS 16-soic for si3200-g-fsr

Cấu hình chân cho SI3200-G-FS (16-soic for si3200-g-fsr gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-soic for si3200-g-fsr cho SI3200-G-FS

Không có dữ liệu chân cụ thể sẵn có cho SI3200-G-FS.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SI3200-G-FS phù hợp cho 6 Áp dụngs: Two-Channel Telephone Line Interface, Subscriber Line Access Concentrator, Voice Gateway Line Card, Central Office Voice Access, Digital Private Exchange Interface, Remote Terminal Voice Module.

🌐

Two-Channel Telephone Line Interface

The SI3200-G-FS fits a two-channel subscriber-line access circuit because it is identified as a 2-channel SLIC with a 100 V linefeed rating and 63 dB channel-performance figure. It can sit between protected analog linefeed circuitry and the digital voice-processing section of a line card. The documented 3.3 V operation and approximately 45 mA current support integration into low-voltage telecom logic. Before layout, verify the exact 6-pin SMD outline and confirm that the selected linefeed network and protection components match the manufacturer reference circuit.

🌐

Subscriber Line Access Concentrator

A subscriber-line access concentrator can use the SI3200-G-FS where two analog voice channels must be handled by one telecom interface IC. Its dual-channel organization reduces the number of linefeed devices compared with a single-channel implementation, while the 100 V linefeed rating addresses the high-voltage telephone-line environment. The 45 mA operating-current figure is useful for rail planning on the 3.3 V domain. System-level ringing, surge protection, and codec interoperability must still be validated against the manufacturer application design.

☎️

Voice Gateway Line Card

The SI3200-G-FS is applicable to a voice gateway line card that bridges analog subscriber lines with packet-processing electronics. Its 2-channel SLIC architecture supports parallel voice paths, while the 63 dB specification provides a defined channel-performance figure for front-end selection. The interface operates from 3.3 V, making it suitable for boards that already distribute a low-voltage digital rail. The 100 V linefeed requirement should be handled with an approved protection network and adequate copper clearance rather than treated as an ordinary 3.3 V logic connection.

🏢

Central Office Voice Access

Central-office voice access equipment can use the SI3200-G-FS when the design requires a dedicated dual-channel linefeed front end. The 100 V rating is relevant to subscriber-line circuits, and the 3.3 V supply allows the interface to operate near modern voice processors and digital switching logic. Two-device chipset configurations may also use this family, depending on the channel arrangement required by the surrounding codec architecture. Confirm device-to-device timing, linefeed impedance, and protection strategy with the manufacturer reference schematic.

🏭

Digital Private Exchange Interface

The SI3200-G-FS can support analog trunk or line-facing sections of a digital private exchange when two voice channels are needed on a compact board. Its dual-channel organization and 100 V linefeed rating are useful in equipment exposed to telephone-line voltages, while 3.3 V operation simplifies connection to digital control and voice-processing circuits. Because this is a linefeed interface rather than a complete codec, the design must also provide the required line network, protection, and signal conversion. Validate channel gain and 63 dB performance within the complete voice path.

📡

Remote Terminal Voice Module

A remote terminal voice module can use the SI3200-G-FS for compact two-channel line termination where a 3.3 V digital rail is available. The approximately 45 mA operating-current figure helps establish the local supply budget, and the 100 V linefeed interface separates the voice module from the low-voltage control electronics. Care is required at the board boundary because the linefeed protection network, isolation strategy, and creepage distance are part of the complete design. Use the manufacturer application circuit to determine component placement around the device.

Tóm tắt các sản phẩm được đề xuất

SI3200-G-FSR Related Skyworks telecom SLIC and codec family member Được sử dụng trong: Two-Channel Telephone Line Interface, Subscriber Line Access Concentrator, Voice Gateway Line Card, Central Office Voice Access, Digital Private Exchange Interface, Remote Terminal Voice Module
What is the SI3200-G-FS?
The SI3200-G-FS is a Skyworks Solutions dual-channel Subscriber Line Interface Concept, or SLIC, integrated circuit for telecom line-card equipment. Verified product information identifies it as a linefeed interface IC with a 100 V linefeed rating, 3.3 V supply operation, approximately 45 mA operating current, and 63 dB channel performance. It is intended for analog telephone-line interface applications.
What is the operating voltage of SI3200-G-FS?
The SI3200-G-FS operates from a 3.3 V supply according to the SI3200-G-FS specification result. Its 100 V figure refers to the linefeed interface rating rather than the low-voltage logic supply. The two voltage domains should therefore be treated separately when planning protection, isolation, and power-conversion stages around the interface.
How many channels does SI3200-G-FS provide?
The SI3200-G-FS is identified as a 2-channel SLIC and provides two subscriber-line interface channels in one device. The Mouser listing also notes that two units are needed for a dual-channel chipset, indicating that the dual-channel designation describes the device's parallel channel capability rather than a requirement to populate two packages for one voice path.
What package does SI3200-G-FS use?
The SI3200-G-FS specification result describes a 6-pin SMD package. Package information for the closely related SI3200-G-FSR instead identifies a 16-SOIC, so the package must not be inferred from the related MPN. Confirm the exact outline, pin numbering, and land pattern using the manufacturer drawing for SI3200-G-FS before starting a PCB layout.
Where can I download the SI3200-G-FS datasheet?
The SI3200-G-FS datasheet PDF and specification listing are available through the FindIC product page listed on this page. Use the manufacturer document when finalizing electrical limits and pin assignments. The distributor pages provide ordering and package summaries, but the manufacturer document remains the controlling reference for linefeed networks, protection requirements, and layout details.
Where can I find the SI3200-G-FS pinout?
Use the manufacturer pin-description table and package drawing for the SI3200-G-FS to determine the exact pinout. The available product summaries identify a 6-pin SMD arrangement but do not provide individual pin numbers or names, so a reliable numbered pinout cannot be reproduced here. Do not use the SI3200-G-FSR 16-SOIC pinout as a substitute.
What are the key specifications of SI3200-G-FS that engineers should know?
The principal documented specifications are 2 channels, a 100 V linefeed rating, 3.3 V operation, approximately 45 mA operating current, and 63 dB channel performance. The SI3200-G-FS is a telecom SLIC rather than a general-purpose amplifier or codec. Its design role is to connect subscriber-line voice circuitry to the wider access-system signal chain.
Is SI3200-G-FS suitable for telecom line-card applications?
Yes, the SI3200-G-FS is specifically identified as a dual-channel SLIC and linefeed interface IC, making it suitable for telecom line-card and subscriber-line-access equipment. Its 100 V linefeed rating is relevant to telephone-line environments, while the 3.3 V supply supports integration with modern digital voice-processing electronics.
Can SI3200-G-FS be used in a dual-channel voice design?
The SI3200-G-FS is already a 2-channel SLIC, so one package supports two parallel subscriber-line channels. The vendor note that two units are needed for a dual-channel chipset refers to a chipset configuration rather than the channel count of one device. Confirm the codec, linefeed network, and protection architecture in the manufacturer reference design.
What is the best drop-in replacement for SI3200-G-FS?
No drop-in replacement is established by the available cross-reference information. SI3200-G-FSR is the closest listed family member and is described as a 16-SOIC telecom SLIC/CODEC, but its exact pinout and electrical compatibility cannot be confirmed. Because a true drop-in requires the same footprint and pin function, use the manufacturer cross-reference and compare the complete datasheet before substitution.
Is SI3200-G-FS the same as SI3200-G-FSR?
No, SI3200-G-FS and SI3200-G-FSR should not be treated as automatically identical. SI3200-G-FSR is explicitly listed as a 16-SOIC telecom SLIC/CODEC, while the SI3200-G-FS summary identifies a 6-pin SMD linefeed IC. The differing package descriptions are a strong reason to verify pin compatibility before considering a replacement.
SI3200-G-FS vs SI3200-G-FSR - which is better for a new design?
Choose SI3200-G-FS when the design specifically calls for its documented dual-channel 100 V linefeed function, 3.3 V operation, and 45 mA current figure. Consider SI3200-G-FSR only when the system requires its separate SLIC/CODEC feature set and the manufacturer data confirms the required 16-SOIC footprint and signals. The parts should not be interchanged without a pin-by-pin comparison.
When should I choose SI3200-G-FS over another SLIC?
Choose SI3200-G-FS when the subsystem requires a dedicated 2-channel linefeed interface with a 100 V rating, 3.3 V operation, and approximately 45 mA operating current. Select another SLIC when the codec, channel count, protection method, voice codecs, linefeed topology, or automotive qualification differs. The final decision should follow the manufacturer application circuit rather than package similarity alone.
Where can I buy SI3200-G-FS online?
Use the Request a Quote form on this page to request the exact SI3200-G-FS MPN, current availability, and lead time. The form is the appropriate channel for a quote-first purchase and avoids ambiguity with the closely related SI3200-G-FSR. Confirm the package suffix and required quantity when submitting the request.
What is the price and lead time for SI3200-G-FS?
Current price and lead time for the exact SI3200-G-FS should be obtained through the Request a Quote form on this page. The available listing results establish product identity and market availability but do not print an exact quantity-break price table for this MPN. The request should specify the required quantity, package form, and intended delivery schedule.
Is SI3200-G-FS in stock and how long is the lead time?
Current stock and lead time are not consistently stated for the exact SI3200-G-FS in the available results, so use the Request a Quote form on this page for a current commitment. One catalog result reported substantial inventory, but it did not provide a quantity-specific lead time. Confirm the exact suffix and purchase quantity when requesting an order.
What design considerations matter for a 100 V SLIC layout?
The linefeed domain and 3.3 V logic domain require careful isolation and protection planning because the SI3200-G-FS combines a 100 V-rated linefeed interface with 3.3 V operation. Follow the manufacturer reference circuit for protection components, linefeed networks, grounding, and decoupling. Keep sensitive voice paths away from high-voltage switching nodes and verify clearances against the final board voltage class.
Is the SI3200-G-FS RoHS compliant and automotive qualified?
The available product information confirms a lead-free SI3200-G-FS, but it does not explicitly confirm RoHS, REACH, or AEC-Q100 qualification for the target MPN. Treat those compliance fields as unknown until the manufacturer declaration or product documentation identifies them. Automotive design work additionally requires traceability of the exact orderable MPN.

Dữ liệu tham khảo kỹ thuật cho SI3200-G-FS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SI3200-G-FS for a two-channel subscriber-line interface requiring a dedicated SLIC front end, a 100 V linefeed rating, 3.3 V operation, and approximately 45 mA operating current. Consider SI3200-G-FSR when the subsystem specifically requires a combined SLIC and CODEC and its 16-SOIC package matches the design; do not assume it can replace SI3200-G-FS because the available package descriptions conflict. Consider SI3200-FS only after checking its lower listed maximum-supply figure and all linefeed pins against the target board. The SI3200-G-FS is best suited to telecom access, line-card, central-office, voice-gateway, private-exchange, and remote-terminal designs where two parallel line channels and a high-voltage linefeed front end are required.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SI3200-G-FSR SI3200-FS
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions
Primary Function 2-channel SLIC linefeed interface Telecom SLIC and CODEC Subscriber Line Interface Circuit
Device Category Telecom Interface IC Telecom IC Telecom Interface IC

Bảo phân biệt quan trọng

  • Documented dual-channel linefeed organization (vsSI3200-G-FSR)
  • Defined 3.3 V operating point (vsSI3200-FS)
  • Published operating-current figure (vsSI3200-G-FSR)

Ghi chú thiết kế

Resolve the package discrepancy before layout. The SI3200-G-FS result identifies a 6-pin SMD package, while the related SI3200-G-FSR is identified as a 16-SOIC. Do not derive land patterns from the related part. Use the manufacturer SI3200-G-FS package drawing, pin table, and solder mask recommendations to establish pad locations and keep the high-voltage linefeed network outside low-voltage signal-clearance areas.

Separate the 3.3 V supply budget from the 100 V linefeed domain. The documented operating current is approximately 45 mA, so the device supply must maintain 3.3 V under the required channel and system load. Follow the manufacturer reference circuit for decoupling and protection components. Do not assume that the 100 V rating permits 100 V on the 3.3 V rail or on any unspecified package pin.

Do not treat a similar SI3200 family member as an automatic substitute. SI3200-G-FSR is listed as a 16-SOIC SLIC/CODEC, and SI3200-FS has a different listed maximum-supply figure. Before replacement, compare every pin, supply domain, linefeed topology, protection method, and codec interface. A package-name match alone is insufficient evidence for a production drop-in.

Place the linefeed protection and ringing-control network close to the interface pins while maintaining the separation required by the final 100 V design class. Keep the 63 dB channel-performance path away from noisy switching inductors and digital return currents. Use the manufacturer's application layout as the baseline, then review creepage, clearance, grounding, and copper-current capacity with the board fabrication rules.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Mouser listing identifies the SI3200-G-FS as a lead-free device. Explicit RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 declarations were not included.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

si3200 24h pwr scm si3200 SI3200-G-FS datasheet SI3200-G-FS pinout SI3200-G-FS datasheet pdf SI3200-G-FS equivalent SI3200-G-FS replacement SI3200-G-FS cross reference SI3200-G-FS vs SI3200-G-FSR SI3200-G-FS price SI3200-G-FS stock Skyworks Solutions SI3200-G-FS SI3200-G-FS 100V SLIC SI3200-G-FS telecom interface

Các bộ phận và thuật ngữ liên quan

Skyworks Solutions SI3200-G-FS SI3200-G-FSR SI3200-FS Subscriber Line Interface Concept SLIC telecom interface IC integrated circuit semiconductor dual-channel linefeed interface subscriber line access voice line card central office voice gateway remote terminal 3.3 V supply 100 V linefeed rating 45 mA operating current 63 dB channel performance 6-pin SMD package 16-SOIC lead-free electronics
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ