Texas Instruments

SN75138N - Quad Bus Transceiver | Texas Instruments

MPN: SN75138N ✓ Hoạt động
5 V Vdss 100 mA Id 16-pin PDIP Package
MOQ: 1 |

SN75138N Tóm tắt

Texas Instruments SN75138N is a quadruple bus transceiver with four independent bidirectional channels, a single 5 V supply, and a 16-pin PDIP package. Each channel combines a TTL-compatible driver with a TTL-compatible receiver for two-way communication over single-ended transmission lines. Driver outputs use open-collector architecture and support loads up to 100 mA, while receiver inputs feature high impedance and a high switching threshold.

A bus transceiver is an interface IC that connects digital logic to a shared or point-to-point transmission line. Its driver stage translates TTL logic into an appropriate line-level output, while its receiver stage converts the returned signal into a logic-compatible output. In the SN75138N, the receiver input is internally connected to the corresponding driver output, allowing each channel to support two-way bus communication.

The SN75138N includes common driver-strobe TTL-compatible inputs and clamp diodes on its driver outputs. The common strobe inputs provide a coordinated way to control all four open-collector drivers, which is useful when multiple devices must enter or leave a bus state together. The 100 mA open-collector output capability also permits the drivers to sink substantial bus current while supporting wired-AND behavior on a shared bus.

Each of the four channels is electrically identical, which simplifies system design when several devices communicate through the same package. The high-input-impedance receivers reduce loading on the transmission line, while the high-threshold receivers help distinguish active bus states from noise or inactive line conditions. The open-collector outputs require an external pull-up resistor when used with a wired bus.

Typical applications include bidirectional single-ended data links, computer peripheral interfaces, industrial control buses, test equipment, and embedded systems that require several independently controlled transceiver channels. The combination of four channels, TTL-compatible logic, and open-collector bus outputs is particularly useful when a design needs bidirectional data flow without assigning a separate transceiver IC to each signal.

When laying out the PCB, place the device close to the connector or transmission-line interface and route driver and receiver paths to minimize stub lengths and crosstalk. Provide a suitable pull-up resistor on each wired-AND bus, and check the total sink current from all connected drivers. The 16-pin PDIP package also requires adequate spacing around the leads for through-hole insertion and soldering.

This page consolidates the SN75138N function, verified technical characteristics, package information, design guidance, and replacement considerations. It supports faster component selection by separating verified device facts from practical PCB, bus, and sourcing guidance engineers can apply during design-in.

Bộ thay thế dễ dàng lắp đặt cho SN75138N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

SN75138N Thông số kỹ thuật

Product Type Quadruple bus transceiver
Number of Channels 4 channels
Transceiver Configuration 4 transmitter and 4 receiver channels
Điện áp cung cấp 5 V
Hộp 16-pin PDIP
Kiểu lắp đặt Through-hole
Receiver Input Impedance High impedance
Receiver Switching Threshold High threshold
Driver Input Compatibility TTL-compatible
Strobe Input Compatibility TTL-compatible
Driver Output Type Open-collector
Open-Collector Output Current 100 mA
Output Protection Clamp diodes
Communication Mode Two-way, single-ended

Hướng dẫn cấu hình chân SN75138N 16-pin pdip

Cấu hình chân cho SN75138N (16-pin pdip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin pdip cho SN75138N

Không có dữ liệu chân cụ thể sẵn có cho SN75138N.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SN75138N phù hợp cho 6 Áp dụngs: Bidirectional Single-Ended Data Links, Computer Peripheral Interfacing, Industrial Control Signal Bus, Test and Measurement Equipment, Legacy Embedded System Bus Interface, Wired-AND Control Network.

🌐

Bidirectional Single-Ended Data Links

The SN75138N is suitable when a system needs four independent two-way communication paths between TTL logic and a single-ended transmission line. Each channel combines a TTL-compatible open-collector driver with a high-impedance receiver, allowing the same conductor to carry outbound data and return a response. Using four channels in one 16-pin PDIP reduces package count, while the open-collector architecture supports wired-AND behavior when the bus includes pull-up resistors.

🖥️

Computer Peripheral Interfacing

The four-channel architecture of the SN75138N can connect multiple peripheral-control or status signals to older TTL-compatible computer equipment. Each driver accepts TTL logic and provides an open-collector bus output capable of sinking up to 100 mA, while each receiver returns a TTL-compatible signal. The common driver-strobe inputs are useful when related output channels must be enabled together, helping simplify control of a multi-signal peripheral interface.

🏭

Industrial Control Signal Bus

The SN75138N can support low- or moderate-speed control and status signaling between a controller and remote equipment over single-ended lines. Its high-impedance receiver inputs limit loading, and the open-collector outputs permit shared-bus wired-AND operation with suitable pull-up components. For industrial equipment, use the manufacturer electrical limits and environmental qualifications to confirm that the device matches the enclosure temperature, noise, and ESD requirements.

🔧

Test and Measurement Equipment

A four-channel bus transceiver is useful in test fixtures and legacy instrumentation that require bidirectional command, response, and status paths. The SN75138N combines four receivers and four open-collector drivers in a single 16-pin PDIP, allowing several instrument-control lines to share one interface component. Keep driver and receiver routes away from sensitive analog sections, terminate buses according to the system topology, and verify timing margins at the intended communication rate.

🤖

Legacy Embedded System Bus Interface

The SN75138N can bridge TTL-compatible embedded logic to external single-ended bus lines where four bidirectional channels are required. Driver inputs and common strobes use familiar TTL levels, while high-impedance receivers help preserve signal integrity on the line. Because open-collector outputs require pull-up resistors, the system's voltage, resistance, capacitance, and sink-current budget must be evaluated before the board is released for production.

🔌

Wired-AND Control Network

The SN75138N's open-collector outputs are suited to wired-AND control networks in which multiple devices can pull a shared line low. Four independent channels allow several related signals to use the same interface technique, while the common strobe inputs can coordinate driver states. Every shared line requires an appropriate pull-up resistor, and the design must account for simultaneous low states from multiple drivers when calculating resistor values and maximum bus current.

Tóm tắt các sản phẩm được đề xuất

SN75138 Base quadruple bus transceiver family Được sử dụng trong: Bidirectional Single-Ended Data Links, Computer Peripheral Interfacing, Industrial Control Signal Bus, Test and Measurement Equipment, Legacy Embedded System Bus Interface, Wired-AND Control Network SN55138 Companion quadruple bus transceiver family Được sử dụng trong: Bidirectional Single-Ended Data Links, Computer Peripheral Interfacing, Industrial Control Signal Bus, Test and Measurement Equipment, Legacy Embedded System Bus Interface, Wired-AND Control Network
What is the SN75138N used for?
The SN75138N is a quadruple bus transceiver for two-way communication over single-ended transmission lines. It contains four independent channels, each combining a TTL-compatible open-collector driver with a TTL-compatible receiver. According to the Texas Instruments SN75138 product documentation, the receiver input is internally connected to the driver output, allowing one package to provide four bidirectional bus interfaces in a compact 16-pin PDIP.
What is the operating voltage of the SN75138N?
The SN75138N operates from a single 5 V supply. Its logic-facing driver and strobe inputs are TTL-compatible, and its receiver produces TTL-compatible outputs. According to the Texas Instruments SN75138 manufacturer documentation, the device is intended for TTL systems using a 5 V supply; detailed current limits and temperature ratings should be checked in the electrical-characteristics table before finalizing a design.
Where can I download the SN75138N datasheet PDF?
The official SN75138 datasheet and ordering information are available from the Texas Instruments SN75138 product page at https://www.ti.com/product/SN75138. The product page links to the manufacturer datasheet, device parameters, package information, and quality documentation. Use the manufacturer document for pin assignments, recommended operating conditions, propagation timing, input thresholds, and supply-current limits when completing the hardware design.
Where can I find the SN75138N pinout?
The SN75138N pin assignment is shown in the Texas Instruments manufacturer datasheet, including the four driver inputs, four receiver outputs, common strobe inputs, enable controls, and supply pins. The exact functional names should be transcribed from the pin-description table before PCB routing. The verified listing identifies the physical device as a 16-pin PDIP, or 16-PDIP, package.
How many channels does the SN75138N have?
The SN75138N provides four independent transceiver channels, each comprising one driver and one receiver. The distributor description identifies the SN75138N as a 4/4 transceiver in a 16-pin PDIP package. This channel density allows a system to support four bidirectional single-ended links without using four separate single-channel transceiver packages.
Can the SN75138N drive a shared open-collector bus?
Yes, the SN75138N driver outputs are open-collector and can sink up to 100 mA, making them suitable for wired-AND bus arrangements. According to the Texas Instruments SN75138 manufacturer documentation, the outputs include clamp diodes and require the customary external pull-up arrangement for a positive-high bus. The aggregate sink current from every connected driver must remain within the device and bus-system limits.
What can replace the SN75138N?
A valid direct replacement for the SN75138N must use the same 16-pin PDIP footprint, preserve the four-channel bidirectional interface, and match the driver, receiver, strobe, supply, and logic-level functions. No confirmed pin-compatible replacement was established from the available cross-reference records, so engineers should not substitute a related quad transceiver solely by function family. Use the Request a Quote form on this page to ask about availability and sourcing support for the original MPN.
Is the SN75138N the same as the SN75138?
The SN75138N is the PDIP-packaged orderable designation of the Texas Instruments SN75138 quadruple bus transceiver family. The SN75138 is the family-level product name, while the N suffix identifies the specific 16-pin PDIP package option shown by the distributor listing. Package suffix codes must always be checked before treating a related orderable designation as an exact drop-in replacement.
What is the best SN75138N equivalent for an existing design?
The best equivalent is the part that preserves the SN75138N's 16-pin PDIP pinout, 5 V operation, four open-collector driver channels, four TTL-compatible receivers, and common strobe behavior. The available cross-reference results did not identify a manufacturer-confirmed cross-brand equivalent with complete footprint and parametric confirmation. Treat the SN75138 family as the starting point, then verify the exact package and electrical differences in the manufacturer datasheet.
SN75138N versus SN75138P: which package should I choose?
Choose the package that matches the existing PCB footprint rather than choosing solely by the base family name. The SN75138N is the 16-pin PDIP version, while the physical package of any alternate suffix must be confirmed from its own ordering information. A surface-mount alternate is not a pin-to-pin drop-in replacement for a through-hole board and may require different land patterns and assembly processes.
When should I choose the SN75138N over a discrete transceiver circuit?
Choose the SN75138N when a design needs several bidirectional single-ended bus links and can use TTL-compatible logic and open-collector outputs. Integrating four channels into one 16-pin PDIP reduces repeated receiver and driver circuitry, while the common strobe inputs help coordinate the bus drivers. A discrete implementation may be preferable only when it offers a required voltage, speed, isolation, or protection feature not present in this device.
Is the SN75138N suitable for industrial control and test equipment?
The SN75138N can fit industrial-control and test-equipment interfaces that use 5 V TTL logic and open-collector single-ended signaling. Its four independent channels support multiple bus links, while the high-impedance receiver inputs reduce line loading. For industrial deployment, confirm the device's rated operating-temperature range, ESD exposure, isolation requirements, and applicable regulatory requirements before approving the design.
What are the key specifications of SN75138N that engineers should know?
The key SN75138N specifications are four independent transceiver channels, a single 5 V supply, TTL-compatible driver and strobe inputs, high-impedance high-threshold receiver inputs, open-collector outputs rated to 100 mA, and a 16-pin PDIP package. These characteristics make the device appropriate for bidirectional single-ended buses where wired-AND behavior and multiple independently controlled channels are useful.
Where can I buy the SN75138N and what is its lead time?
The SN75138N can be requested through the Request a Quote form on this page for current commercial availability, minimum order quantity, lead time, and shipment details. The SN75138N is identified as a Texas Instruments 4/4 transceiver in a 16-pin PDIP package, and the manufacturer product page supports the technical selection. Request a formal quotation to confirm current supply status and production traceability.
What is the price of the SN75138N?
Current SN75138N pricing is handled through the Request a Quote form on this page rather than displayed as a static figure. The form allows quantity, target date, and shipment requirements to be included in the request, which is important for older or allocation-sensitive interface ICs. The part is a Texas Instruments 4/4 bus transceiver supplied in the 16-pin PDIP package.
Is the SN75138N in stock?
Current SN75138N stock should be confirmed through the Request a Quote form on this page because availability can change with manufacturer inventory and order volume. The verified product information identifies the SN75138N as a Texas Instruments 4/4 quadruple bus transceiver in a 16-pin PDIP package. Submit the required quantity and delivery schedule to obtain a current supply commitment.
How should pull-up resistors and PCB routing be handled for the SN75138N?
Use a suitable pull-up resistor on every positive-high open-collector bus and keep the driver trace short to reduce ringing and crosstalk. According to the Texas Instruments SN75138 documentation, the driver outputs use open-collector structures and include clamp diodes. Place the transceiver close to the connector or bus interface, avoid long stubs, and confirm that the combined sink current from all connected drivers remains acceptable.

Dữ liệu tham khảo kỹ thuật cho SN75138N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SN75138N when the PCB requires four independent bidirectional single-ended channels, a 5 V supply, TTL-compatible logic, and open-collector bus outputs in a 16-pin PDIP package. It is especially useful for wired-AND buses, legacy peripheral interfaces, and industrial or test equipment that needs multiple two-way signal paths without separate single-channel transceivers. A replacement must preserve the same pinout, 16-pin PDIP footprint, 5 V operation, driver and receiver behavior, and common strobe functions; a device with only similar functional specifications may require PCB changes. No confirmed drop-in alternatives were established from the available cross-reference results, so the original SN75138N is the safest selection for an existing design. For a new design, evaluate whether open-collector outputs, propagation delay, input thresholds, and environmental ratings meet the bus requirements before approving the through-hole footprint.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 16-pin PDIP
Brand Texas Instruments
Product Type Quadruple bus transceiver
Number of Channels 4
Supply Voltage 5 V
Driver Output Type Open-collector
Open-Collector Output Current 100 mA
Receiver Input Impedance High impedance
Driver and Strobe Input Logic TTL-compatible
Communication Mode Two-way, single-ended

Ghi chú thiết kế

The SN75138N uses open-collector driver outputs, so every positive-high bus must include a suitable pull-up resistor. Confirm the resistor against the bus voltage, capacitance, signal rise-time requirement, and the maximum sink current from all connected drivers. Avoid assuming that an open-collector output actively drives a high level; the external pull-up performs that function.

Place the SN75138N near the connector or transmission-line interface and keep each driver and receiver route short. Minimize stubs and maintain the intended return path beneath the signal where practical. Poorly positioned traces can increase ringing, crosstalk, and susceptibility to induced noise, particularly when several open-collector outputs share a bus or when the connected line has appreciable capacitance.

Use the common driver-strobe inputs as intended rather than enabling only some drivers in a coordinated bus without checking the resulting bus state. Review the SN75138 truth table and enable requirements in the manufacturer documentation. A driver that is unexpectedly active or disabled can hold the wired-AND line low, preventing other nodes from communicating.

Keep the 16-pin PDIP away from high-current switching paths, inductors, and high-voltage switching nodes. The DIP footprint requires adequate board clearance for the leads and assembly tooling. If the transceiver connects to a connector, place the pull-up resistors close enough to minimize exposed high-impedance trace length, but still follow the bus's required topology and current-budget calculations.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the verified product records. AEC-Q100 is not applicable because the verified device is a through-hole interface IC rather than an automotive-qualified orderable variant.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SN75138N datasheet SN75138N datasheet pdf SN75138N pinout SN75138N equivalent SN75138N replacement SN75138N cross reference SN75138N 16-PDIP SN75138N open collector SN75138N application circuit Texas Instruments SN75138N SN75138N price SN75138N stock

Các bộ phận và thuật ngữ liên quan

Texas Instruments SN75138N SN75138 SN55138 quadruple bus transceiver transceiver interface IC semiconductor TTL open-collector output wired-AND bus single-ended transmission line bidirectional communication driver receiver common driver strobe high-input-impedance receiver high-threshold receiver clamp diodes 16-pin PDIP PDIP package through-hole package single 5 V supply 100 mA sink current
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ