Texas Instruments

SN75154N - Quad Differential RS-232 Line Receiver | Texas Instruments

MPN: SN75154N ✓ Hoạt động
5 V typical single-supply operation Vdss 7 kΩ over the full EIA/TIA-232-E voltage range Rds(on) 16-pin PDIP Package
MOQ: 1 |

SN75154N Tóm tắt

The Texas Instruments SN75154N is a quadruple differential line receiver in a 16-pin PDIP package. It is designed for RS-232 interfaces based on ANSI Standard EIA/TIA-232-E and ITU Recommendation V.28, while also supporting relatively short, single-line, point-to-point data transmission and general level-translation applications. The device is intended for operation from a single 5 V supply and uses a low-power Schottky line-receiver implementation.

A differential line receiver converts the voltage difference between a pair of signal conductors into a digital logic level. This differential signaling helps reject common-mode voltage present on the cable or circuit board. The SN75154 family is intended for data-terminal equipment and data-communication equipment interfaces where multiple RS-232 channels are needed. Its four receiver channels make it suitable for compact multiport interface assemblies, industrial control links, and legacy peripheral equipment.

According to the manufacturer product information, the SN75154 has an input resistance of 7 kΩ over the full EIA/TIA-232-E voltage range. Its input threshold is adjustable to meet fail-safe requirements without external components. These features are important in RS-232 systems where an open, short, or inactive driver can place the receiver input into a valid, predictable logic state. The adjustable threshold can therefore help establish system behavior before a connected transmitter becomes active.

The SN75154N uses Schottky input logic and provides four differential receiver channels in one monolithic device. It is suited to point-to-point links, interface isolation, receive-side logic interfacing, and systems that need more than one RS-232 input but do not require the corresponding transmit drivers. The four independent channels also allow a single package to handle several communication ports while reducing component count and board area compared with four single-receiver packages.

Designers should provide a stable 5 V supply, place input and ground connections to minimize loop area, and account for the logic thresholds and common-mode voltage limits of the connected RS-232 network. Decoupling capacitors should be positioned close to the supply pins, and unused receiver inputs should be handled according to the manufacturer's pin-description and application guidance so that they remain in a defined state. A pull-up or pull-down arrangement may be needed where the interface must maintain a fail-safe state during startup or cable disconnection.

This product page combines the manufacturer description, interface standards, package information, sourcing guidance, and practical implementation considerations. It also distinguishes the SN75154N from related orderable suffixes and identifies the limits of drop-in replacement decisions: electrical equivalence alone is insufficient unless the package, pin arrangement, supply requirements, and receiver thresholds also match the original design.

Bộ thay thế dễ dàng lắp đặt cho SN75154N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

SN75154NG4

✅ Drop-In
📦 16-pin PDIP
Same SN75154 family; orderable suffix differs by 0%, while temperature grade and qualification markings require confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

SN75154NE4

✅ Drop-In
📦 16-pin PDIP
Same SN75154 family; orderable suffix differs by 0%, with temperature and qualification markings requiring confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

SN75154

✅ Drop-In
📦 16-pin PDIP
Base family orderable designation; the package and electrical suffix must be confirmed before substitution

📋 Tham chiếu thay thế (không có trong danh mục)

SN75154N Thông số kỹ thuật

Product Type Quadruple differential line receiver
Receiver Channel Count 4 channels
Điện áp cung cấp 5 V typical single-supply operation
Interface Standard ANSI Standard EIA/TIA-232-E
Telecommunication Recommendation ITU Recommendation V.28
Input Resistance 7 kΩ over the full EIA/TIA-232-E voltage range
Input Threshold Adjustable to meet fail-safe requirements without external components
Logic Technology Low-power Schottky line receiver
Supported Signal Type Differential line signaling
Primary Application RS-232 data-terminal equipment and data-communication equipment interfaces
Additional Application Short-distance single-line point-to-point data transmission
Additional Function Level translation
Hộp 16-pin PDIP
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân SN75154N 16-pin pdip

Cấu hình chân cho SN75154N (16-pin pdip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin pdip cho SN75154N

Không có dữ liệu chân cụ thể sẵn có cho SN75154N.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SN75154N phù hợp cho 6 Áp dụngs: Multiport RS-232 Interface Equipment, Industrial Control Terminal, Point-to-Point Data Links, Legacy Peripheral Connectivity, Level Translation, Data Communication Equipment.

🌐

Multiport RS-232 Interface Equipment

The SN75154N is well suited to equipment that receives data from several RS-232 ports because it combines four differential receiver channels in one 16-pin PDIP package. Each channel can recover a logic signal from an EIA/TIA-232-E-compatible line while rejecting voltage shared by the signal pair. This reduces the number of receiver packages needed compared with a design using four separate single-channel devices. The 5 V supply architecture also simplifies integration with legacy TTL/CMOS logic. Because the receiver has an adjustable fail-safe threshold, a product designer can define the state presented when a cable is absent or the remote transmitter is inactive, improving predictable behavior during startup and field-service events.

🏭

Industrial Control Terminal

The SN75154N can form the receive section of a legacy industrial controller that communicates with RS-232 equipment such as printers, scales, test fixtures, or configuration tools. Four differential receiver channels allow one controller board to accept multiple equipment links, while the EIA/TIA-232-E and V.28 interface focus provides a defined connection to standard RS-232 equipment. Its monolithic low-power Schottky implementation supports a conventional 5 V system. Before using the receiver in a temperature-extreme factory environment, confirm the device's operating-temperature and ESD limits against the enclosure, cable length, and industrial grounding conditions.

🔧

Point-to-Point Data Links

The SN75154N is appropriate for relatively short, single-line, point-to-point data paths where differential receive behavior improves signal reliability. The four channels can be assigned to separate links when a system needs compact channel density, or left partly unused when only one receiver is required. Its 7 kΩ input resistance is specified across the full EIA/TIA-232-E voltage range, providing a defined input loading characteristic for the line interface. Because this is a receiver rather than a complete transceiver, the transmitting side must be implemented separately with a suitable line driver and the same ground-reference strategy.

🖥️

Legacy Peripheral Connectivity

The SN75154N supports the receive side of legacy RS-232 peripherals used for configuration, diagnostics, firmware loading, or service access. Its four-channel architecture is useful in instrument and controller products that expose several serial service ports without dedicating a receiver IC to each connector. The adjustable input threshold can help implement fail-safe behavior for disconnected cables, reducing ambiguity in command parsers. Board-level implementation should include an RS-232 protection strategy, controlled reference ground, short return paths, and connector considerations suited to the cable environment; logic-level compliance alone does not provide complete electrostatic or surge protection.

🔧

Level Translation

Beyond conventional RS-232 ports, the SN75154N can be used as a differential-to-logic level translator when the input signals remain within the receiver's specified voltage and common-mode limits. Four translated channels in one package can reduce component count in equipment that handles several control or status lines. The receiver's fail-safe threshold is particularly helpful where an inactive or floating source must map to a predictable logic level. The design must preserve the receiver's common-reference arrangement and must not exceed its specified input limits. Confirming the exact logic thresholds and input ranges from the manufacturer datasheet is essential before treating it as a general-purpose differential translator.

📡

Data Communication Equipment

The SN75154N is explicitly suited to the receive interface of data-communication equipment that follows the EIA/TIA-232-E interface model. A communications product with several inbound channels can use the four receiver circuits to convert differential line voltages into digital signals for a controller or bus transceiver. This can simplify board partitioning while maintaining a conventional 5 V supply domain. Production designs should still validate cable length, connector wiring, signal polarity, input common-mode range, and ground-reference behavior against the complete system specification. The SN75154N handles receive-side signal conditioning; protection, isolation, transmit drive, and higher-level protocol functions remain separate design tasks.

What is the SN75154N?
The SN75154N is a four-channel differential RS-232 line receiver from Texas Instruments. According to the manufacturer product page, it is a monolithic low-power Schottky line receiver designed for the interface between data-terminal equipment and data-communication equipment defined by ANSI Standard EIA/TIA-232-E. It operates normally from a single 5 V supply and is packaged in a 16-pin PDIP.
What are the key specifications of SN75154N that engineers should know?
The SN75154N provides four differential receiver channels, a 5 V typical supply, and a 7 kΩ input resistance over the full EIA/TIA-232-E voltage range. Its input threshold is adjustable for fail-safe operation without external components. These characteristics make it suitable for multi-channel RS-232 receiving, short point-to-point links, and level-translation applications in a 16-pin PDIP package.
Where can I download the SN75154N datasheet PDF?
The official datasheet and product information are available from the Texas Instruments SN75154 product page at https://www.ti.com/product/SN75154. The manufacturer page describes the quadruple differential line receiver, operating supply, EIA/TIA-232-E and V.28 applications, 7 kΩ input resistance, and adjustable fail-safe threshold. Use the manufacturer PDF for authoritative pin descriptions, electrical limits, and test conditions.
Where can I find the SN75154N pinout?
The SN75154N pin assignment is published in the pin-configuration section of the Texas Instruments SN75154 datasheet at https://www.ti.com/product/SN75154. The device uses a 16-pin PDIP package with four differential receiver channels. Assign every trace and decoupling connection from the numbered package drawing rather than relying only on functional block diagrams.
Can the SN75154N receive four RS-232 signals at once?
Yes, the SN75154N contains four differential receiver channels, allowing one package to receive four independent RS-232 signals. Each channel evaluates the voltage difference between its paired conductors and produces a corresponding logic-level output. This integration can reduce board area and component count in equipment with several RS-232 ports or multiple receive-only links.
What standards does the SN75154N support?
The SN75154N supports ANSI Standard EIA/TIA-232-E and ITU Recommendation V.28 interface requirements. According to the manufacturer product page, its 7 kΩ input resistance applies across the full EIA/TIA-232-E voltage range. These standards describe the electrical behavior of the RS-232 interface used between data-terminal equipment and data-communication equipment.
Why does the SN75154N have an adjustable input threshold?
The adjustable input threshold lets the receiver satisfy fail-safe requirements without external threshold-setting components. When the remote transmitter is disconnected or inactive, the receiver can be arranged to recognize the resulting input condition as a defined logic state. This behavior is valuable in systems where a disconnected cable must not be interpreted as an unpredictable command.
Where can I buy SN75154N online?
Use the Request a Quote form on this page to request SN75154N availability, current lead time, and order quantities. The product is offered as a Texas Instruments 16-pin PDIP receiver, and the exact suffix and packaging must be confirmed before ordering. The Request a Quote workflow provides the current commercial response without relying on a potentially stale static price.
What is the price of SN75154N?
The current SN75154N price is generated through the Request a Quote form on this page. Pricing can vary with order quantity, procurement status, and the exact Texas Instruments orderable suffix, so no static price should be used for budgeting. Submit the required quantity and delivery location through the quote request to receive the current commercial offer.
What is the lead time for SN75154N?
Request the current SN75154N lead time through the Request a Quote form on this page. Lead time depends on supplier inventory, order quantity, and the exact orderable suffix being manufactured. For production planning, specify the annual usage, forecast cadence, and required delivery dates so the supply response can reflect the actual procurement schedule.
Is SN75154N in stock?
Check current SN75154N stock through the Request a Quote form on this page because availability can change with purchasing volume and manufacturing status. Include the desired package suffix and quantity with the request. For scheduled production, provide a forecast and minimum stock target so the supplier can confirm the appropriate allocation and delivery schedule.
What is the best drop-in replacement for SN75154N?
The closest documented drop-in candidates are the orderable SN75154 family variants listed by Texas Instruments and in the cross-reference results, provided their suffix corresponds to the same PDIP package. A valid replacement must preserve the 16-pin pinout, 5 V operation, receiver thresholds, 7 kΩ input-resistance behavior, and EIA/TIA-232-E compatibility. Confirm the exact manufacturer datasheet before committing a replacement to production.
Can SN75154NG4 replace SN75154N?
SN75154NG4 is a documented SN75154-family orderable variant and is the closest same-family option identified for SN75154N. Its suitability as a drop-in replacement depends on confirming that the selected orderable suffix retains the same PDIP package and pin configuration. The cross-reference listing associates the parts closely, but the manufacturer ordering information should govern production use.
What can replace SN75154N?
A replaceable SN75154 must use the same 16-pin PDIP footprint and preserve the receiver function, 5 V supply, input resistance, logic thresholds, and RS-232 voltage handling. SN75154-family orderable variants are the first candidates to evaluate. Do not assume that a generic RS-232 receiver is interchangeable because enable-pin functions, fail-safe thresholds, and input common-mode ranges can differ.
Is SN75154N the same as an RS-232 driver?
No. The SN75154N is a receiver-only device with four differential input channels and corresponding logic outputs; it does not include RS-232 transmit drivers. A matched transmit function requires a separate quad driver such as a suitable MC1489-family device. Combining the SN75154N with compatible drivers is useful when a system needs separate receive and transmit directions.
SN75154N vs SN75154NG4 - which is better for an existing PCB?
SN75154N and SN75154NG4 belong to the same SN75154 receiver family, and SN75154NG4 is identified as a close orderable variant. For an existing 16-pin PDIP PCB, the practical choice is whichever suffix is confirmed to have the same package, pinout, electrical limits, and qualification requirements. If both match those requirements, use the suffix with the required lifecycle, temperature grade, and procurement status.
When should I choose SN75154N over a single-channel RS-232 receiver?
Choose the SN75154N when the design needs four RS-232 receive channels in one package. Its four-channel integration can reduce IC count, board area, and duplicated supply-routing effort compared with four separate single receivers. A single-channel device may be preferable when only one port is needed or when a smaller package, lower channel count, or different electrical rating is required.
Is SN75154N suitable for industrial interface equipment?
The SN75154N is functionally suitable for legacy RS-232 receive interfaces, but industrial suitability depends on its specified operating temperature, ESD withstand, supply tolerance, and lifecycle status. Those exact limits must be checked in the manufacturer datasheet before deployment in temperature-extreme or electrically noisy environments. Its EIA/TIA-232-E compatibility alone does not establish full industrial qualification.
How should the SN75154N be decoupled on a PCB?
Place the supply bypass capacitor and ground return as close as practical to the device power pins, following the layout guidance in the Texas Instruments datasheet. Keep the exposed traces short and connect the bypass return directly to the device ground plane rather than through a long shared path. The exact capacitor value and permitted ESR should be taken from the manufacturer recommendations.

Dữ liệu tham khảo kỹ thuật cho SN75154N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SN75154N for a 5 V, receive-only RS-232 design that needs four differential channels in a 16-pin PDIP footprint. It is especially useful when multiple ports share a controller and disconnected cables must produce predictable fail-safe states. SN75154NG4 and SN75154NE4 are the closest same-family orderable alternatives identified; select the suffix whose temperature grade, qualification markings, lifecycle status, and exact PDIP configuration match the production requirement. SN75154 is also suitable as the base family designation when the selected orderable suffix is confirmed. The SN75154N should not be chosen for a design requiring integrated transmit drivers, isolation, higher voltage tolerance, or a small surface-mount package. In those cases, use a separate line driver, protection network, isolation interface, or a receiver with the required package and ratings. Always verify the manufacturer pinout and electrical limits before reusing an existing board.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SN75154NG4 SN75154NE4 SN75154
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP, exact orderable suffix to confirm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Receiver Channel Count 4 channels 4 channels 4 channels 4 channels
Product Function Quadruple differential line receiver Quadruple differential line receiver Quadruple differential line receiver Quadruple differential line receiver
Supply Voltage 5 V typical single-supply operation 5 V typical single-supply operation 5 V typical single-supply operation 5 V typical single-supply operation
Input Resistance 7 kΩ over the full EIA/TIA-232-E voltage range 7 kΩ over the full EIA/TIA-232-E voltage range 7 kΩ over the full EIA/TIA-232-E voltage range 7 kΩ over the full EIA/TIA-232-E voltage range
Input Threshold Adjustable for fail-safe operation without external components Adjustable for fail-safe operation without external components Adjustable for fail-safe operation without external components Adjustable for fail-safe operation without external components
Interface Standards ANSI EIA/TIA-232-E and ITU V.28 ANSI EIA/TIA-232-E and ITU V.28 ANSI EIA/TIA-232-E and ITU V.28 ANSI EIA/TIA-232-E and ITU V.28

Bảo phân biệt quan trọng

  • Four RS-232 receive functions in one package (vsSN75154NG4)
  • Differential receive operation with defined input loading (vsSN75154NE4)
  • Fail-safe threshold adjustment without external components (vsSN75154)

Ghi chú thiết kế

Route each differential receiver pair with a continuous return reference and minimize loop area between the pair. Place supply bypass capacitance directly at the SN75154N power and ground pins, using a short and low-inductance connection to the ground plane. Avoid sharing a narrow ground path between bypass current and external connector return current, because shared impedance can shift the receiver reference and reduce the benefit of differential signaling.

Do not substitute a receiver solely because it is labeled RS-232. Verify the package and pinout, 5 V supply compatibility, input common-mode range, output thresholds, enable behavior, propagation delay, and fail-safe threshold. The SN75154N is a receiver-only IC, so a design also needs a separate transmit driver and appropriate connector protection. Confirm unused-channel connections using the manufacturer pin-description table.

Keep RS-232 connector and cable protection close to the connector so surge or ESD current does not flow through logic-board traces. Use the device's differential input behavior as part of the signal strategy, but maintain a controlled ground reference and observe the specified input common-mode voltage range. For long or noisy cables, validate thresholds and behavior at the receiver rather than assuming ideal differential immunity.

Provide a stable 5 V rail with local bypass at the receiver. The monolithic low-power Schottky implementation is designed for conventional single-supply operation, but the exact supply-current limit and power-dissipation rating must be checked in the datasheet before adding external loads. Use the same supply-domain conventions for input thresholds and output logic levels to avoid an intermediate voltage range at the interface.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer page and distributor snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for SN75154N. Use the current manufacturer product documentation for compliance declarations.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SN75154N datasheet SN75154N pinout SN75154N datasheet pdf SN75154N schematic SN75154N equivalent SN75154N replacement SN75154N cross reference SN75154N vs SN75154NG4 SN75154N RS232 receiver SN75154N PDIP-16 SN75154N price Texas Instruments SN75154N

Các bộ phận và thuật ngữ liên quan

Texas Instruments SN75154N SN75154NG4 SN75154NE4 SN75154 RS-232 EIA/TIA-232-E ITU Recommendation V.28 differential line receiver bus receiver interface IC level translator Schottky logic 5 V power supply input resistance fail-safe threshold common-mode voltage PDIP-16 through-hole package industrial control data communication equipment point-to-point data link MC1489NG4 MC1489NE4 MC1488NE4
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ