MaxLinear

SP3232EUCT-L - 1 Mbps Dual RS-232 Transceiver | MaxLinear

MPN: SP3232EUCT-L ✓ Hoạt động
3.0 V to 5.5 V Vdss 16 pins Package
MOQ: 1 |

SP3232EUCT-L Tóm tắt

The MaxLinear SP3232EUCT-L is a dual-driver, dual-receiver RS-232 transceiver designed for high-speed serial communication from a single 3.0 V to 5.5 V supply. It supports a maximum data rate of 1000 kbps and is packaged in a 16-pin SOIC for compact industrial, communications, and embedded equipment.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible levels. The SP3232E family integrates two line drivers, two line receivers, and a charge-pump supply, placing it within the hierarchy of interface ICs, communications transceivers, and RS-232 interface silicon.

The SP3232EUCT-L provides two transmit channels and two receive channels, allowing one RS-232 port to handle two data directions. Its single-supply operation supports both 3.3 V and 5 V system environments. The manufacturer's charge-pump design requires only 0.1 uF capacitors in 3.3 V operation, reducing external component count while preserving full RS-232 signal levels. Its 1000 kbps capability is suitable for moderate-speed serial links, including embedded control ports and industrial peripherals.

The integrated charge pump generates the positive and negative voltages needed by RS-232 drivers from the single supply. This architecture avoids a separate bipolar power source and allows the device to operate from a 3.0 V to 5.5 V source. Because the interface performs level translation at the physical layer, the connected host or target UART still handles data framing, baud-rate agreement, parity, flow control, and protocol behavior.

Typical uses include industrial control equipment, portable data-acquisition systems, service interfaces, POS terminals, and embedded debug or configuration ports. The 16-pin SOIC package supports conventional surface-mount assembly and remains practical for boards where component height is more constrained than the size of a dual-inline package.

Confirm the exact pin assignment, charge-pump capacitor values, and decoupling requirements in the manufacturer datasheet before PCB release. Preserve short, direct paths for the charge-pump nodes and place the required capacitors close to their associated pins to reduce switching noise and unstable driver behavior.

This product page combines the SP3232EUCT-L electrical characteristics, same-package replacement options, application guidance, and design notes to help engineers evaluate the transceiver quickly and implement a reliable RS-232 interface.

Bộ thay thế dễ dàng lắp đặt cho SP3232EUCT-L — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SP3232EUCT-L (cùng hình factor và footprint).

MaxLinear

SP3232ECT-L/TR

✅ Drop-In
MaxLinear
📦 SOIC-16
2/2 RS-232 transceiver · 2 · 2 · 3 V to 5.5 V · 120 kbit/s · True EIA/TIA-232-F · 1 µA · 0.1 µF

Liên hệ để biết giá

Xem tài liệu →

SP3232EUCT-L/TR

✅ Drop-In
MaxLinear
📦 SOIC-16
2 drivers · 2 receivers · 2/2 full RS-232 · 3 V to 5.5 V · 1000 kbps · High-efficiency charge-pump supply · 0.1 µF · RS-232

Liên hệ để biết giá

Xem tài liệu →

SN65C3232DW

✅ Drop-In
📦 SOIC-16
Both provide 2/2 RS-232 transceivers with charge-pump supply; enable polarity, thresholds, ESD rating, and capacitance values require comparison

📋 Tham chiếu thay thế (không có trong danh mục)

SP3232EUCT-L Thông số kỹ thuật

Transceiver Configuration 2 drivers and 2 receivers
Interface Standard RS-232
Maximum Data Rate 1000 kbps
Single Supply Voltage Range 3.0 V to 5.5 V
Charge-Pump Capacitance 0.1 uF in 3.3 V operation
Driver Count 2 channels
Receiver Count 2 channels
Package Pin Count 16 pins
Package Type SOIC-16
Kiểu lắp đặt Surface mount
Supply Type Single supply
Charge-Pump Supply On-chip

Hướng dẫn cấu hình chân SP3232EUCT-L soic-16

Cấu hình chân cho SP3232EUCT-L (soic-16 gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân soic-16 cho SP3232EUCT-L

Không có dữ liệu chân cụ thể sẵn có cho SP3232EUCT-L.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SP3232EUCT-L phù hợp cho 6 Áp dụngs: Industrial Control Interface, Portable Data-Acquisition Unit, Point-of-Sale Terminal, Embedded Debug and Configuration Port, Networking and Communication Module, Test and Measurement Equipment.

🏭

Industrial Control Interface

The SP3232EUCT-L suits an industrial controller that exposes an RS-232 configuration or service port because it combines two transmit channels, two receive channels, and a 1000 kbps maximum data rate. Its single 3.0 V to 5.5 V supply can share a rail with 3.3 V or 5 V control logic, while the integrated charge pump eliminates a separate bipolar supply. Place the required 0.1 uF capacitors close to the charge-pump pins and use a protection strategy appropriate for an externally accessible cable.

📱

Portable Data-Acquisition Unit

The SP3232EUCT-L is appropriate for a compact data-acquisition unit that needs to exchange commands and records with a host over RS-232. Its 16-pin SOIC footprint limits board area, while the 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. The 1000 kbps rate provides ample margin for many short command sequences and sampled-data packets. Ensure the UART baud rate, cable length, connector grounding, and protection network are engineered for the installation environment.

🖥️

Point-of-Sale Terminal

The SP3232EUCT-L can provide a wired service or peripheral interface in a point-of-sale terminal where dual RS-232 channels improve board utilization. Two drivers and two receivers support simultaneous transmit and receive functions, and the integrated charge pump operates from a single 3.0 V to 5.5 V rail. The surface-mount SOIC package is convenient for automated assembly. For retail deployments, add appropriate cable-side transient protection and verify the peripheral voltage levels, handshake method, and timing against the host UART.

🔧

Embedded Debug and Configuration Port

The SP3232EUCT-L is useful for an embedded debug, programming, or configuration connector that must add a wired RS-232 interface without requiring a bipolar supply. Its 1000 kbps capability supports common service protocols and short firmware-loading sessions, while operation from 3.3 V simplifies integration with low-power processors. Keep the serial traces short, provide clean common grounding, and verify that the connector's logic side uses compatible levels. Production designs should also consider firmware-based recovery because a physical service port may not be available on every enclosure.

🌐

Networking and Communication Module

The SP3232EUCT-L can bridge a low-voltage embedded controller to an external RS-232 management or diagnostic interface in a communication module. Its two-driver, two-receiver arrangement provides flexibility for separate command and status channels, and the single-supply charge pump supports space-constrained designs. At 1000 kbps, the interface can carry diagnostic traffic efficiently without imposing the power and space demands of a separate line-driver assembly. Validate protocol timing and add surge protection when the cable leaves the equipment enclosure.

🧩

Test and Measurement Equipment

The SP3232EUCT-L is suitable for the control or remote-command interface of test and measurement equipment because it combines a 1 Mbps RS-232 channel set with a compact surface-mount package. The interface can connect a legacy controller, service computer, or automation fixture while receiving responses over the integrated receiver channels. Its broad single-supply range makes it practical across 3.3 V and 5 V instrument architectures. Use shielded cabling, reliable grounding, and connector-side protection where the equipment supports long external leads or frequent reconnections.

What is the SP3232EUCT-L?
The SP3232EUCT-L is a 1 Mbps dual RS-232 transceiver from MaxLinear with two drivers, two receivers, and an integrated charge-pump supply. According to the manufacturer datasheet, it operates from a single 3.0 V to 5.5 V source and requires only 0.1 uF charge-pump capacitors in 3.3 V operation. It is packaged in a 16-pin SOIC for surface-mount industrial and embedded serial-interface designs.
What is the operating voltage of the SP3232EUCT-L?
The SP3232EUCT-L operates from a single supply of 3.0 V to 5.5 V. According to the MaxLinear manufacturer datasheet, the 3.3 V operating point uses 0.1 uF charge-pump capacitors. This supply range allows the same interface design to be used beside 3.3 V digital logic or 5 V systems, subject to the input, output, and absolute-maximum limits listed for the selected package variant.
How fast can the SP3232EUCT-L transmit RS-232 data?
The SP3232EUCT-L supports a maximum transmission rate of 1000 kbps. According to the MaxLinear manufacturer datasheet, the SP3232EU family is intended for high-speed RS-232 applications. This rate is suitable for many embedded control, configuration, and data-acquisition links, although the complete UART, cable, connector, loading, and signal-integrity design must also support the selected baud rate.
Where can I download the SP3232EUCT-L datasheet PDF?
The SP3232EUCT-L datasheet PDF is available from MaxLinear at https://www.maxlinear.com/ds/sp3222eu_sp3232eu.pdf. The document covers the SP3222EU and SP3232EU families, including the dual-driver, dual-receiver architecture, supply range, charge-pump circuit, and application information. Use the manufacturer document for authoritative pin assignments, capacitor values, electrical limits, and operating guidance.
Where can I find the SP3232EUCT-L pinout?
The SP3232EUCT-L pin assignment is shown in the MaxLinear SP3222EU/SP3232EU manufacturer datasheet at https://www.maxlinear.com/ds/sp3222eu_sp3232eu.pdf. Use the pin-description table and package drawing together because the SP3232EUCT-L is a 16-pin SOIC variant. The assignment table also identifies supply, ground, charge-pump, driver-output, receiver-input, and enable connections.
Can the SP3232EUCT-L operate from a 3.3 V supply?
Yes, the SP3232EUCT-L can operate from a 3.3 V supply. According to the MaxLinear manufacturer datasheet, the high-efficiency charge-pump supply needs only 0.1 uF capacitors in 3.3 V operation while still providing RS-232-compatible line levels. The host UART and logic circuitry should also use compatible 3.3 V signal levels, and the required charge-pump capacitors must be placed close to the package pins.
What is the best drop-in replacement for the SP3232EUCT-L?
The SP3232ECT-L/TR is a close same-package replacement for the SP3232EUCT-L because both use a 16-pin SOIC and provide a 2/2 RS-232 transceiver, although temperature-grade details should be checked before substitution. The SP3232EUCT-L/TR is also a 16-SOIC option with matching core functionality, but it differs in shipping format. Confirm operating-temperature requirements, enable behavior, and the complete pin table before production use.
Can the SN65C3232DW replace the SP3232EUCT-L?
The SN65C3232DW is a potential 16-pin SOIC cross-brand alternative because it also provides two line drivers, two line receivers, and a dual charge-pump RS-232 interface. However, the SP3232EUCT-L/TR comparison identifies the Texas Instruments device rather than the SOIC DW ordering code. Verify enable polarity, receiver and driver thresholds, ESD performance, capacitance requirements, and every exposed-pin function against both datasheets before substitution.
When should I choose the SP3232EUCT-L over an alternative?
Choose the SP3232EUCT-L when the design requires a 16-pin SOIC RS-232 interface operating from 3.0 V to 5.5 V at up to 1000 kbps. It is a practical fit when using MaxLinear's established charge-pump architecture and local sourcing is important. Select an alternative only after checking temperature grade, enable polarity, ESD rating, pin functions, and charge-pump capacitance rather than relying on package similarity alone.
Is the SP3232EUCT-L suitable for an industrial RS-232 port?
The SP3232EUCT-L is technically suitable for many industrial RS-232 ports because it provides 1 Mbps operation, a single 3.0 V to 5.5 V supply, and an integrated charge pump in a 16-pin SOIC. For a deployed industrial product, verify the exact temperature grade and ESD rating, use suitable protection for externally accessible cables, and perform signal-integrity testing with the intended connector and cable.
Where can I buy the SP3232EUCT-L and check its lead time?
Use the Request a Quote form on this page to request the SP3232EUCT-L, current commercial terms, stock allocation, and lead time. The form is the preferred route for changing price and supply information and can identify the appropriate production quantity. Firm order confirmation should specify the exact 16-pin SOIC MPN, delivery package, quantity, and manufacturing schedule.
What is the price of the SP3232EUCT-L?
Submit the SP3232EUCT-L quantity and required delivery schedule through the Request a Quote form on this page for current commercial terms. Commercial pricing can vary with order quantity, production continuity, packaging, and market availability, so a static figure would not represent a dependable quotation. The exact requested MPN and quantity should be included in the request to avoid confusion with related SOIC or TSSOP variants.
Is the SP3232EUCT-L in stock?
Current stock for the SP3232EUCT-L should be confirmed through the Request a Quote form on this page. The form can route the request for the exact MPN and return an allocation or lead-time estimate appropriate to the requested quantity. Do not substitute a related packing code automatically, because a reel, tube, or other shipping format can affect handling and production planning.
What are the key specifications of the SP3232EUCT-L that engineers should know?
The SP3232EUCT-L combines two RS-232 drivers, two receivers, a 1000 kbps maximum data rate, and a single 3.0 V to 5.5 V supply in a 16-pin SOIC. According to the MaxLinear manufacturer datasheet, its integrated charge-pump arrangement requires 0.1 uF capacitors in 3.3 V operation. These are the principal parameters to compare against an alternative, together with temperature grade, ESD protection, enable behavior, and pin-level compatibility.
What can replace the SP3232EUCT-L?
The SP3232EUCT-L can be replaced by a 16-pin SOIC device that preserves its RS-232 signal functions, supply range, data rate, charge-pump architecture, and pin assignments. Close same-package options include SP3232ECT-L/TR and SP3232EUCT-L/TR, while the SN65C3232DW is a cross-brand candidate for detailed comparison. No replacement should be approved from package shape alone; verify every pin and electrical limit against the manufacturer datasheets.

Dữ liệu tham khảo kỹ thuật cho SP3232EUCT-L — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SP3232EUCT-L for a 16-pin SOIC design requiring two RS-232 drivers, two receivers, a 3.0 V to 5.5 V supply, and operation up to 1000 kbps. SP3232ECT-L/TR is a logical same-manufacturer alternative when its 0 C to 70 C temperature grade matches the product and the remaining electrical specifications are confirmed. SP3232EUCT-L/TR provides the same core function in a tape-and-reel shipping format, making it convenient for volume production. Consider the SN65C3232DW for a second-source strategy, particularly when its ±15 kV pin-side ESD rating is important, but verify enable polarity, thresholds, capacitance values, and every pin function. For a one-channel interface, MAX3221IPWR may be a simpler architectural choice. Do not use the 16-TSSOP SP3232EUCY-L as a footprint-compatible replacement because its package differs.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SP3232ECT-L/TR SP3232EUCT-L/TR SN65C3232DW
Brand MaxLinear, Inc. MaxLinear, Inc. MaxLinear, Inc. Texas Instruments
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Interface Standard RS-232 RS-232 RS-232 RS-232
Charge-Pump Supply Integrated Integrated Integrated Dual charge-pump circuit

Bảo phân biệt quan trọng

  • Two full-duplex RS-232 channels in one package (vsMAX3221IPWR)
  • Single-supply operation across 3.3 V and 5 V systems (vsSN65C3232DW)
  • High-speed RS-232 operation (vsSP3232ECT-L/TR)

Ghi chú thiết kế

Place the charge-pump capacitors and supply-decoupling capacitor as close as practical to their associated SP3232EUCT-L pins. The manufacturer specifies 0.1 uF charge-pump capacitors for 3.3 V operation. Short capacitor connections reduce the loop area of the switching charge pump and help limit conducted and radiated noise. Follow the manufacturer datasheet layout for the exact capacitor connections and exposed-pin treatment.

Route RS-232 driver and receiver traces away from clocks, switching supplies, and high-slew-rate digital signals. Although the maximum device data rate is 1000 kbps, connector transitions, cable loading, reflections, and ground differences can still cause errors on longer links. Keep the interface ground return close to the signal path, use controlled-impedance routing where appropriate, and validate the completed board with the intended cable and connector.

Do not select a replacement solely because both devices use a 16-pin SOIC. Verify the pin-to-pin assignments, enable polarity, driver and receiver thresholds, charge-pump capacitor network, operating-temperature grade, and ESD rating. SP3232ECT-L/TR is documented at 0 C to 70 C, while the SN65C3232DW description includes ±15 kV ESD protection. Those differences can affect production qualification even when the package outlines match.

The integrated charge pump switches internally to generate RS-232 voltage levels. Use the capacitor values and placement shown in the manufacturer datasheet, and avoid routing the charge-pump nets beneath long sensitive analog or communication paths. If radiated emissions approach the product's regulatory limits, examine the supply network, cable common mode, connector return path, and board grounding before changing the transceiver itself.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

AEC-Q100 qualification is not applicable to this general-purpose RS-232 interface. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material documentation.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SP3232EUCT-L datasheet SP3232EUCT-L pinout SP3232EUCT-L datasheet pdf SP3232EUCT-L equivalent SP3232EUCT-L replacement SP3232EUCT-L cross reference SP3232EUCT-L vs SN65C3232DW SP3232EUCT-L footprint SP3232EUCT-L application circuit SP3232EUCT-L price SP3232EUCT-L stock MaxLinear SP3232EUCT-L SP3232EUCT-L 1000 kbps RS-232 SP3232EUCT-L 16-SOIC

Các bộ phận và thuật ngữ liên quan

MaxLinear, Inc. SP3232EUCT-L SP3232ECT-L/TR SP3232EUCT-L/TR SN65C3232DW MAX3221IPWR RS-232 RS-232 transceiver interface IC communications transceiver UART CMOS logic charge pump 1000 kbps single-supply operation 3.3 V operation 0.1 uF capacitor SOIC-16 surface mount SMD industrial control data acquisition point-of-sale terminal embedded configuration port test and measurement equipment
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ