STB-GP - RT1850/RT1860 Panel | Analog Devices | Telecom
MPN: STB-GP ✓ Hoạt độngSTB-GP Tóm tắt
A specialized interface IC or panel is used to connect, route, adapt, or terminate signals within a larger telecom, networking, or embedded system. The STB-GP listing connects this item with RT1850 and RT1860, which are identified by the source data as related assemblies, but the exact electrical role, signal directions, connector arrangement, and supported system configuration are not provided. Engineers should therefore confirm the system revision and board connector before ordering or substituting it.
The available commercial evidence indicates availability rather than a complete technical datasheet. LCSC lists STB-GP as in stock with a starting price of $69.6681, eBee lists a starting price of $73.2624, and Rochester/FPGACenter lists a starting unit price of $146.99 with volume discounts for quantities of 10, 100, 500, and 1,000. Prices are reproduced as reported and may change without notice as of 2026-10-23. Octopart also lists Analog Devices STB-GP and directs buyers to compare bulk pricing and availability.
Because the verified sources do not specify package dimensions, pin count, mounting type, operating temperature, voltage, current, RoHS, REACH, or automotive qualification, this page does not invent those values. The procurement-critical decision is compatibility with the intended RT1850/RT1860 assembly, not an assumed generic IC replacement. Request the current Analog Devices or Rochester Electronics documentation, mechanical drawing, and revision information before using the part in a new design.
This page combines verified distributor identity, reported pricing, lifecycle information, sourcing links, and explicit data gaps. It is intended to help engineers identify STB-GP quickly while preventing unsupported assumptions about electrical compatibility, package fit, or drop-in replacement.
Bộ thay thế dễ dàng lắp đặt cho STB-GP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
STB-GP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STB-GP Thông số kỹ thuật
| Manufacturer | Analog Devices |
| Manufacturer Description | PANEL FOR RT1850 RT1860 |
| Danh mục | Integrated Circuits (ICs), Interface, Specialized |
| Product Status | Active |
| Trạng thái vòng đời | Active |
| Source Classification | Specialized interface component |
Hướng dẫn cấu hình chân STB-GP standard
Cấu hình chân cho STB-GP (standard gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho STB-GP.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STB-GP phù hợp cho 6 Áp dụngs: RT1850 Telecom Equipment Panel, RT1860 Telecom Equipment Panel, Telecom Interface Card Repair, Legacy Network Equipment Maintenance, Specialized Interface Assembly Integration, Telecom Test and Measurement Fixture.
RT1850 Telecom Equipment Panel
The STB-GP is specifically identified by the verified listings as a panel for RT1850, making it most relevant to equipment or service assemblies built around that platform. Its fit depends on the exact RT1850 hardware revision, connector arrangement, and board or chassis documentation, because the supplied data does not define electrical ratings or a pinout. Before installation, compare the panel mechanically and verify every connection against the original service schematic. The part should not be treated as a generic interchangeable IC because its verified identity is tied to a specific equipment family rather than a published general-purpose interface standard.
Được đề xuất
RT1860 Telecom Equipment Panel
STB-GP is also described as a panel for RT1860, so it may be relevant to repair, maintenance, or replication of equipment using that platform. The supplied evidence confirms the association but does not provide signal names, connector pinouts, voltage levels, impedance, or environmental limits. Engineers should obtain the RT1860 assembly documentation and compare the replacement panel’s connectors, mounting points, cable routing, and revision identifiers. This is a service-oriented application where traceability and exact mechanical fit are more important than general interface-category similarity.
Được đề xuất
Telecom Interface Card Repair
For repair inventories, STB-GP can be considered when the original equipment documentation identifies the same RT1850 or RT1860 panel and the replacement matches the mechanical and electrical interfaces. The verified distributor pages report active or in-stock status, which can help maintenance teams locate supply, but they do not provide a replacement cross-reference or testing procedure. Inspect connector condition, verify continuity and insulation, confirm shield grounding, and compare the assembly revision before installation. Do not substitute based solely on the phrase “interface IC” in a distributor category.
Được đề xuất
Legacy Network Equipment Maintenance
STB-GP may support maintenance of legacy telecom equipment where an RT1850 or RT1860 panel is still deployed and the original documentation is available. The verified Rochester listing reports the item as active production, but it does not confirm obsolescence policy, revision availability, or long-term supply commitments. A maintenance design should therefore record the exact STB-GP marking, distributor source, date code, and test results. Confirm connector pinouts and cable shield arrangements before installation, and preserve the removed assembly for failure analysis when replacing a field unit.
Được đề xuất
Specialized Interface Assembly Integration
The catalog classification places STB-GP among Interface and Specialized ICs, so it may be used in an equipment assembly that requires the documented RT1850/RT1860 panel function. The verified data does not establish protocol support, power requirements, signal levels, or environmental qualification. System integrators should treat the component as an assembly-specific item rather than a conventional interchangeable IC. Obtain assembly drawings, electrical schematics, connector definitions, and service instructions from the equipment manufacturer. If those documents are unavailable, the part should not be approved for a safety- or mission-critical design.
Được đề xuất
Telecom Test and Measurement Fixture
A test fixture for RT1850 or RT1860 equipment may use STB-GP when reproducing the original panel interface and connector arrangement. Since the verified sources provide no pinout, impedance, signal timing, or electrical limits, fixture design cannot rely on generic interface assumptions. Engineers should derive the fixture from the original equipment documentation, then verify continuity, power levels, grounding, and signal behavior under representative loads. Treat the available distributor price as sourcing information only, and document all substitutions or test adapters so that maintenance results remain traceable.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STB-GP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STB-GP |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Manufacturer Description | PANEL FOR RT1850 RT1860 | PANEL FOR RT1850 RT1860 |
| Category | Interface, Specialized | Interface, Specialized |
| Lifecycle Status | Active | Active |
| LCSC Starting Price | $69.6681 | $69.6681 |
| eBee Starting Price | $73.2624 | $73.2624 |
| Rochester Starting Price | $146.99 | $146.99 |
| Related Assemblies | RT1850 and RT1860 | RT1850 and RT1860 |
Bảo phân biệt quan trọng
- Equipment-specific RT1850 and RT1860 association (vsGeneric interface ICs)
- Reported active lifecycle status (vsObsolete or unavailable legacy panel listings)
- Multiple reported sourcing channels (vsSingle-source procurement)
- Catalog identity is panel-oriented (vsConventional packaged interface semiconductors)
Ghi chú thiết kế
Do not install STB-GP solely because a distributor labels it an Interface IC. The verified description ties it to RT1850 and RT1860 panels, while package, pinout, interface, and electrical data are unavailable. Confirm the original equipment part number, board revision, connector geometry, signal assignments, voltage, and grounding before ordering or applying power.
Obtain the original RT1850/RT1860 schematic and connector drawings before assigning any signal function. Verify continuity, return paths, shielding, impedance-sensitive nets, and protection polarity after installation. Because no verified impedance, timing, or logic-level information is available, do not infer signal integrity from the catalog category or use a generic interface IC as a reference.
Treat STB-GP as an assembly-specific mechanical item until the manufacturer drawing is obtained. Compare mounting holes, connector locations, panel thickness, cable exits, keep-out areas, and chassis clearances against the removed assembly. A package symbol or pin layout must not be created from assumptions; if the item is a panel rather than a conventional IC, its mechanical interface is the primary design constraint.
Distributor prices are not guaranteed quotations and can change with inventory, quantity, date code, and sourcing channel. The reported prices are $69.6681 at LCSC, $73.2624 at eBee, and $146.99 through Rochester/FPGACenter as of 2026-10-23. Confirm stock, authorized status, traceability, packaging, delivery, and return terms in writing before using STB-GP in production.
Thông tin tuân thủ
No compliance declarations were included in the verified web data. Compliance may depend on the complete panel or assembly rather than the individual STB-GP designation.
