STM32F358RCT6 - 256KB Flash ARM Cortex-M4F MCU | STMicroelectronics
MPN: STM32F358RCT6 ✓ Hoạt độngSTM32F358RCT6 Tóm tắt
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, enabling control, monitoring, and communication in applications ranging from consumer electronics to industrial automation. The STM32F358RCT6 belongs to the STM32F3 series, which is optimized for mixed-signal processing, combining a powerful Cortex-M4F core with advanced analog peripherals such as operational amplifiers, comparators, and a 12-bit ADC with up to 5 MSPS.
Key features of the STM32F358RCT6 include a 72 MHz ARM Cortex-M4F core with FPU, 256 KB flash, 48 KB SRAM, and a rich set of peripherals: three 12-bit ADCs (up to 5 MSPS), two 12-bit DACs, three operational amplifiers, two comparators, multiple timers (including advanced-control timers), and a wide range of communication interfaces (I2C, SPI, USART, CAN, USB). The device also features a memory protection unit (MPU), a DMA controller, and a CRC calculation unit. These features make it suitable for applications requiring precise analog measurement and real-time control.
Technically, the STM32F358RCT6 is built on a 90nm process technology, offering a balance between performance and power consumption. The Cortex-M4F core includes a single-precision FPU and DSP instructions, enabling efficient execution of complex algorithms such as digital filters and motor control loops. The device supports a supply voltage range of 2.0V to 3.6V and operates over a temperature range of -40°C to +85°C. The LQFP64 package provides 51 GPIOs, with many pins multiplexed to support alternate functions.
Typical applications include motor control (e.g., field-oriented control of brushless DC motors), industrial automation (PLC, sensors), medical devices (patient monitoring), and consumer electronics (smart home hubs). The advanced analog peripherals make it particularly well-suited for applications requiring high-resolution analog-to-digital conversion and signal conditioning.
When designing with the STM32F358RCT6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin must be connected to a clean analog supply, and VREF+ should be decoupled with a 1uF capacitor. For ADC accuracy, use a low-impedance source and consider adding a small RC filter on analog inputs.
Bộ thay thế dễ dàng lắp đặt cho STM32F358RCT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F358RCT6 (cùng hình factor và footprint) — khác nhau ở Comparators, Operational Amplifiers, Package, SRAM, Timers.
STM32F303RCT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32F358RCT7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32F358RCT6TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32F303RCT7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32F358RCT6 Tỷ lệ tối đa & tính chất điện
| Core | ARM Cortex-M4F with FPU |
| Maximum Frequency | 72 MHz |
| Flash Memory | 256 KB |
| SRAM | 48 KB |
| Điện áp cung cấp | 2.0 V to 3.6 V |
| Nhiệt độ hoạt động | -40C to +85C |
| Hộp | LQFP64 (10x10 mm) |
| GPIO Pins | 51 |
| ADC | 3x 12-bit, up to 5 MSPS |
| DAC | 2x 12-bit |
| Operational Amplifiers | 3 |
| Comparators | 2 |
| Timers | Multiple (incl. advanced-control) |
| Communication Interfaces | I2C, SPI, USART, CAN, USB |
| DMA | Yes |
| RoHS | Compliant |
Cấu hình chân STM32F358RCT6
| Chân 1 | VBAT — Battery backup supply |
| Chân 2 | PC13 — GPIO / RTC output |
| Chân 3 | PC14 — GPIO / OSC32_IN |
| Chân 4 | PC15 — GPIO / OSC32_OUT |
| Chân 5 | PF0 — GPIO / OSC_IN |
| Chân 6 | PF1 — GPIO / OSC_OUT |
| Chân 7 | NRST — Reset (active low) |
| Chân 8 | VSSA — Analog ground |
| Chân 9 | VDDA — Analog power supply |
| Chân 10 | PA0 — GPIO / ADC / TIM2_CH1 |
| Chân 11 | PA1 — GPIO / ADC / TIM2_CH2 |
| Chân 12 | PA2 — GPIO / USART2_TX / ADC |
| Chân 13 | PA3 — GPIO / USART2_RX / ADC |
| Chân 14 | PA4 — GPIO / DAC_OUT1 / SPI1_NSS |
| Chân 15 | PA5 — GPIO / DAC_OUT2 / SPI1_SCK |
| Chân 16 | PA6 — GPIO / SPI1_MISO / TIM3_CH1 |
| Chân 17 | PA7 — GPIO / SPI1_MOSI / TIM3_CH2 |
| Chân 18 | PC4 — GPIO / ADC / I2S |
| Chân 19 | PC5 — GPIO / ADC / I2S |
| Chân 20 | PB0 — GPIO / ADC / TIM3_CH3 |
| Chân 21 | PB1 — GPIO / ADC / TIM3_CH4 |
| Chân 22 | PB2 — GPIO / BOOT1 |
| Chân 23 | PB10 — GPIO / I2C2_SCL / USART3_TX |
| Chân 24 | PB11 — GPIO / I2C2_SDA / USART3_RX |
| Chân 25 | VSS_1 — Ground |
| Chân 26 | VDD_1 — Power supply |
| Chân 27 | PB12 — GPIO / SPI2_NSS / TIM1_BKIN |
| Chân 28 | PB13 — GPIO / SPI2_SCK / TIM1_CH1N |
| Chân 29 | PB14 — GPIO / SPI2_MISO / TIM1_CH2N |
| Chân 30 | PB15 — GPIO / SPI2_MOSI / TIM1_CH3N |
| Chân 31 | PC6 — GPIO / TIM3_CH1 / I2S |
| Chân 32 | PC7 — GPIO / TIM3_CH2 / I2S |
| Chân 33 | PC8 — GPIO / TIM3_CH3 / I2S |
| Chân 34 | PC9 — GPIO / TIM3_CH4 / I2S |
| Chân 35 | PA8 — GPIO / TIM1_CH1 / USB |
| Chân 36 | PA9 — GPIO / USART1_TX / TIM1_CH2 |
| Chân 37 | PA10 — GPIO / USART1_RX / TIM1_CH3 |
| Chân 38 | PA11 — GPIO / USB_DM / TIM1_CH4 |
| Chân 39 | PA12 — GPIO / USB_DP / TIM1_ETR |
| Chân 40 | PA13 — GPIO / SWDIO |
| Chân 41 | VSS_2 — Ground |
| Chân 42 | VDD_2 — Power supply |
| Chân 43 | PA14 — GPIO / SWCLK |
| Chân 44 | PA15 — GPIO / JTDI / TIM2_CH1 |
| Chân 45 | PB3 — GPIO / JTDO / TIM2_CH2 |
| Chân 46 | PB4 — GPIO / NJTRST / TIM3_CH1 |
| Chân 47 | PB5 — GPIO / I2C1_SMBA / TIM3_CH2 |
| Chân 48 | PB6 — GPIO / I2C1_SCL / TIM4_CH1 |
| Chân 49 | PB7 — GPIO / I2C1_SDA / TIM4_CH2 |
| Chân 50 | BOOT0 — Boot mode selection |
| Chân 51 | PB8 — GPIO / CAN_RX / TIM4_CH3 |
| Chân 52 | PB9 — GPIO / CAN_TX / TIM4_CH4 |
| Chân 53 | VSS_3 — Ground |
| Chân 54 | VDD_3 — Power supply |
| Chân 55 | PC10 — GPIO / USART3_TX / I2S |
| Chân 56 | PC11 — GPIO / USART3_RX / I2S |
| Chân 57 | PC12 — GPIO / USART3_CK / I2S |
| Chân 58 | PD2 — GPIO / TIM3_ETR |
| Chân 59 | PC0 — GPIO / ADC / I2S |
| Chân 60 | PC1 — GPIO / ADC / I2S |
| Chân 61 | PC2 — GPIO / ADC / I2S |
| Chân 62 | PC3 — GPIO / ADC / I2S |
| Chân 63 | VSS_4 — Ground |
| Chân 64 | VDD_4 — Power supply |
Ứng dụng tiêu biểu
STM32F358RCT6 phù hợp cho 6 Áp dụngs: Motor Control, Industrial Automation, Medical Devices, Consumer Electronics, IoT and Smart Home, Test and Measurement.
Motor Control
The STM32F358RCT6 is ideal for motor control applications, particularly field-oriented control (FOC) of brushless DC motors. Its advanced-control timers generate PWM signals with dead-time insertion, while the high-speed ADC (up to 5 MSPS) samples phase currents with minimal delay. The Cortex-M4F FPU accelerates the complex mathematical computations required for FOC, such as Clarke and Park transforms. The operational amplifiers and comparators can be used for current sensing and overcurrent protection. In a typical FOC implementation, the MCU reads current sensors, computes the rotor position, and updates PWM duty cycles in real-time, achieving smooth and efficient motor operation. The device's 72 MHz clock and 256 KB flash provide ample headroom for control algorithms and communication protocols.
Được đề xuất
Industrial Automation
In industrial automation, the STM32F358RCT6 serves as the central controller for PLCs, sensors, and actuators. Its rich set of communication interfaces (CAN, USART, SPI, I2C) enables seamless integration with industrial networks such as Modbus and CANopen. The 12-bit ADC with up to 5 MSPS allows precise measurement of analog signals from sensors, while the DACs can generate analog control signals. The device's robust design, with a wide supply voltage range and extended temperature options, ensures reliable operation in harsh industrial environments. The MPU enhances system reliability by preventing unauthorized memory access, which is critical for safety-critical applications. The 256 KB flash and 48 KB SRAM are sufficient for complex control logic and data logging.
Được đề xuất
Medical Devices
The STM32F358RCT6 is well-suited for medical devices such as patient monitors and diagnostic equipment. Its high-resolution ADC (12-bit, up to 5 MSPS) enables accurate acquisition of physiological signals like ECG and EEG. The operational amplifiers can be used for signal conditioning, while the Cortex-M4F FPU processes the data for filtering and analysis. The device's low power consumption and wide supply voltage range make it suitable for battery-powered portable devices. The MPU ensures data integrity and security, which is essential for medical applications. The 256 KB flash allows storing patient data and firmware updates. The device's small LQFP64 package is ideal for compact medical devices.
Được đề xuất
Consumer Electronics
In consumer electronics, the STM32F358RCT6 can be used in smart home hubs, wearable devices, and audio equipment. Its USB interface enables easy connectivity to PCs and smartphones, while the DACs can generate audio signals. The device's low power consumption is ideal for battery-powered devices, and the wide supply voltage range allows operation from a single lithium-ion cell. The Cortex-M4F FPU accelerates audio processing algorithms, such as noise cancellation and equalization. The 256 KB flash provides ample storage for firmware and user settings. The device's rich peripheral set, including timers and communication interfaces, makes it a versatile choice for a wide range of consumer products.
Được đề xuất
IoT and Smart Home
The STM32F358RCT6 is an excellent choice for IoT and smart home applications, such as smart thermostats, lighting control, and security systems. Its low power consumption and multiple low-power modes (Sleep, Stop, Standby) enable battery-powered operation for extended periods. The device's communication interfaces (SPI, I2C, USART) allow connection to Wi-Fi, Bluetooth, and Zigbee modules. The ADC can read sensors for temperature, humidity, and light, while the DACs can control analog actuators. The 256 KB flash and 48 KB SRAM are sufficient for running a real-time operating system (RTOS) and handling network protocols. The device's small package and wide supply voltage range make it easy to integrate into smart home devices.
Được đề xuất
Test and Measurement
The STM32F358RCT6 is well-suited for test and measurement equipment, such as data loggers, oscilloscopes, and signal generators. Its high-speed ADC (up to 5 MSPS) enables accurate sampling of analog signals, while the DACs can generate precise analog waveforms. The device's multiple timers can be used for time-stamping and triggering. The Cortex-M4F FPU accelerates signal processing algorithms, such as FFT and filtering. The 256 KB flash allows storing calibration data and measurement logs. The device's robust design and wide operating temperature range make it suitable for benchtop and portable instruments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F358RCT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F303RCT6 | STM32F358RCT7 | STM32F358RCT6TR | STM32F303RCT7 |
|---|---|---|---|---|---|
| Package | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 48 KB | 48 KB | 48 KB | 48 KB | 48 KB |
| MPU | Yes | No | Yes | Yes | No |
| CRC Unit | Yes | No | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +105C |
Bảo phân biệt quan trọng
- Includes memory protection unit (MPU) (vsSTM32F303RCT6)
- Includes CRC calculation unit (vsSTM32F303RCT6)
- Extended temperature variant available (vsSTM32F358RCT7)
Ghi chú thiết kế
Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin, and add a 4.7uF bulk capacitor. The VDDA pin must be connected to a clean analog supply, and VREF+ should be decoupled with a 1uF capacitor. For best ADC performance, use a low-impedance source and consider adding a small RC filter on analog inputs.
For the LQFP64 package, ensure proper solder paste stencil design to avoid solder bridging. Use a 0.5mm pitch land pattern with a 0.3mm stencil aperture. Provide a solid ground plane under the device to reduce noise and improve thermal performance. Route high-speed signals away from analog inputs to minimize crosstalk.
Do not leave unused GPIO pins floating; configure them as outputs or enable internal pull-ups/pull-downs. Ensure the BOOT0 pin is properly tied to ground for normal boot from flash. When using the ADC, avoid switching digital I/O during conversion to prevent noise coupling. Also, verify that the supply voltage does not exceed 3.6V to prevent damage.
Thông tin tuân thủ
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32F3 series with AEC-Q100 qualification.
