STM32F373VCH7 - 72MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F373VCH7 ✓ Hoạt độngSTM32F373VCH7 Tóm tắt
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one compact device. The STM32F373 belongs to the STM32F3 mixed-signal MCU family, combining real-time embedded control with advanced analog conversion. Its hierarchy is microcontroller MCU, embedded processor, mixed-signal controller, and semiconductor. The ARM Cortex-M4 architecture supports 32-bit instruction execution and includes DSP extensions and an FPU for control, monitoring, and signal-processing workloads.
Key device features include 256 KB of Flash, 32 KB of SRAM, and a maximum core frequency of 72 MHz. The analog subsystem provides four ADCs: conventional 12-bit SAR channels and 16-bit sigma-delta channels. Three on-chip DACs support waveform generation or analog output, while two comparators support threshold and protection functions. These resources make the MCU suitable when deterministic digital control must share a package with high-resolution analog measurement.
The STM32F373 family's mixed-signal architecture lets a design acquire sensor signals, perform calculations, and generate control or reference outputs without requiring separate converters. The Cortex-M4 core operates at up to 72 MHz and includes floating-point and DSP capabilities, allowing firmware to execute filtering, compensation, and closed-loop control algorithms. A 2.0 V to 3.6 V operating range supports common embedded supply rails while keeping the device within a compact 100-UFBGA footprint.
Typical applications include industrial sensor acquisition, precision measurement, industrial automation, medical instrumentation, environmental monitoring, and compact embedded control systems. Its 16-bit sigma-delta ADC channels suit measurements requiring greater resolution than conventional 12-bit SAR conversion, while the three DAC channels can provide programmable analog outputs for excitation, control, or signal generation.
Designers should verify the exact 100-UFBGA pin arrangement, exposed-pad requirements, power sequencing, and analog layout in the official STM32F373 documentation before PCB release. The small 7 x 7 mm package supports compact designs but requires careful escape routing, adequate thermal pathways, and a manufacturing process capable of handling the fine-pitch BGA footprint.
This product page consolidates manufacturer specifications, current distributor availability, verified same-family alternatives, and practical selection guidance. It also distinguishes confirmed drop-in candidates from broadly similar STM32 devices, helping engineers avoid treating package similarity, peripheral equivalence, and true pin-for-pin compatibility as interchangeable requirements.
Bộ thay thế dễ dàng lắp đặt cho STM32F373VCH7 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F373VCH7 (cùng hình factor và footprint) — khác nhau ở Package, Processor Core, Product Type.
STM32F373VCH6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32F373VCH7 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit mixed-signal microcontroller MCU |
| Processor Core | ARM Cortex-M4 with FPU |
| Maximum Core Frequency | 72 MHz |
| Word Size | 32 bit |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| ADC Count | 4 converters |
| SAR ADC Resolution | 12 bit |
| Sigma-Delta ADC Resolution | 16 bit |
| DAC Count | 3 converters |
| Comparator Count | 2 comparators |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Hộp | 100-UFBGA, 7 x 7 mm |
| Kiểu lắp đặt | Surface-mount BGA |
| DSP Capability | Cortex-M4 DSP instructions |
| Product Family | STM32F3 mixed-signal MCU family |
Hướng dẫn cấu hình chân STM32F373VCH7 100-ufbga, 7 x 7 mm
Cấu hình chân cho STM32F373VCH7 (100-ufbga, 7 x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F373VCH7.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F373VCH7 phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Precision Measurement Instrumentation, Environmental Monitoring, Medical Monitoring Equipment, Compact Embedded Control, Precision Signal Generation.
Industrial Sensor Acquisition
The STM32F373VCH7 fits industrial sensor acquisition because it combines four ADCs, including 16-bit sigma-delta channels, with a 72 MHz Cortex-M4 processor and 32 KB SRAM. The microcontroller can acquire sensor inputs, execute filtering and compensation, and manage control logic within one 100-UFBGA 7 x 7 mm package. Its 2.0 V to 3.6 V operating range suits common embedded supply rails. The main design consideration is preserving analog signal integrity close to the BGA, with short traces, suitable grounding, and separation from switching nodes. Final industrial use still requires verification of the exact temperature grade, EMC performance, and application-specific compliance.
Precision Measurement Instrumentation
The STM32F373VCH7 supports precision measurement instruments by combining a 72 MHz 32-bit Cortex-M4 core, floating-point unit, 256 KB Flash, and 32 KB SRAM with high-resolution analog conversion. Four ADCs provide 12-bit SAR and 16-bit sigma-delta options, enabling the same device to handle fast and high-resolution channels. Three DACs can create calibration or stimulus outputs, while two comparators support threshold detection. In an instrument, these resources reduce external converter count and simplify synchronization. Layout must account for the 100-UFBGA footprint, analog ground partitioning, reference stability, and calibration behavior across temperature.
Environmental Monitoring
The STM32F373VCH7 is suitable for environmental monitoring systems that combine slow, high-resolution measurements with real-time control and communications. Its 16-bit sigma-delta ADC channels can support precision sensor acquisition, while the 72 MHz Cortex-M4 with DSP extensions and an FPU can execute filtering, trend analysis, and compensation algorithms locally. The 32 KB SRAM provides working memory for measurement pipelines and control state. A compact 7 x 7 mm 100-UFBGA package also helps minimize board area. Designers should account for sensor excitation noise, reference drift, digital filtering latency, and the distinction between ADC resolution and overall measurement accuracy.
Medical Monitoring Equipment
The STM32F373VCH7 can support medical monitoring equipment where a mixed-signal controller handles sensor acquisition, signal conditioning in firmware, and system control. The four ADC resources include 16-bit sigma-delta channels for high-resolution measurements, while three DACs and two comparators support excitation, threshold detection, and auxiliary analog functions. Its 72 MHz Cortex-M4 core and FPU allow efficient digital filtering and compensation, and the 100-UFBGA package reduces board size. Medical deployment requires separate assessment of electrical isolation, patient protection, accuracy, reliability, and regulatory evidence; none of those claims is established by the supplied distributor data.
Compact Embedded Control
The STM32F373VCH7 is appropriate for compact embedded control systems requiring more processing and analog capability than a basic 8-bit controller. The 72 MHz Cortex-M4 executes real-time control, the 256 KB Flash supports substantially larger firmware than small MCUs, and 32 KB SRAM accommodates working algorithms and peripheral data. Four ADCs, three DACs, and two comparators enable integrated measurement, output control, and protection. Its 100-UFBGA 7 x 7 mm package helps reduce board area but increases assembly and inspection complexity. Firmware and PCB decisions should be based on verified peripheral mapping and pin-level electrical constraints.
Precision Signal Generation
The STM32F373VCH7 supports precision signal generation by pairing three on-chip DAC channels with a 72 MHz Cortex-M4 processor capable of real-time DSP. A control loop can calculate waveform values, update outputs, and monitor them through four ADC channels without requiring separate logic devices. The mixed 12-bit SAR and 16-bit sigma-delta ADC architecture allows generated signals to be measured through channels with different resolution characteristics. The 256 KB Flash and 32 KB SRAM support calibration tables and working data. Engineers should verify DAC output bandwidth, reference accuracy, settling behavior, and analog-output loading against the manufacturer data sheet.
Dữ liệu tham khảo kỹ thuật cho STM32F373VCH7 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F373VCH6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 100-UFBGA 7 x 7 mm | 100-UFBGA 7 x 7 mm |
Bảo phân biệt quan trọng
- Mixed signal resources are integrated on one MCU (vsSTM32F373VCT6)
- Higher-resolution analog measurement is available (vsSTM32F373VCT6)
- Compact surface-mount footprint (vsSTM32F373VCT6)
Ghi chú thiết kế
Treat the 100-UFBGA as a fine-pitch assembly constraint rather than a conventional exposed-pad package. Review the current STMicroelectronics footprint, ball map, solder mask, paste stencil, and board stack-up before release. The supplied package library has no validated 100-UFBGA diagram, so engineers must use the manufacturer's land pattern and verify all 100 connections independently. Do not derive the footprint from an LQFP-100 device or another STM32 BGA variant.
Preserve analog signal quality by routing ADC and DAC connections away from switching power nodes and digital clock signals. Keep analog ground, digital ground, and supply-return paths under deliberate control, and place required input filtering or anti-aliasing components close to the relevant device pins. The 16-bit sigma-delta resolution does not remove the need for reference stability, source impedance control, calibration, and careful grounding.
The verified supply range is 2.0 V to 3.6 V, but active current, regulator requirements, and power-consumption modes are not included in the supplied data. Do not calculate regulator headroom from an assumed current figure. Use the manufacturer's electrical characteristics for operating modes and analog load currents, then verify startup behavior and supply sequencing against the reference design. Validate the final rail under maximum clock, peripheral, and temperature conditions.
Thông tin tuân thủ
The supplied verified data does not state compliance declarations for this exact MPN. AEC-Q100 qualification is reported as unknown rather than not qualified because no qualification statement was provided.
