STM32L151R8H6 - 32MHz Cortex-M3 MCU | STMicroelectronics
MPN: STM32L151R8H6 ✓ Hoạt độngSTM32L151R8H6 Tóm tắt
An ultra-low-power microcontroller is an embedded semiconductor designed to complete measurements, control peripheral functions, and manage communications while minimizing energy consumption. The STM32L151 family combines an ARM Cortex-M3 processing core with timers, serial interfaces, USB connectivity, and low-power operating modes. Within the product hierarchy, it belongs to the Cortex-M microcontroller class, then the STM32 family, and finally the STM32L1 low-power series.
The STM32L151R8H6 provides 64 KB of Flash memory organized as 64K by 8 bits, 10 KB of SRAM, and 4 KB of EEPROM according to the product listing. Its ARM Cortex-M3 core operates at up to 32 MHz, supporting responsive control-loop execution and interrupt-driven peripheral handling. USB connectivity expands the supported application set, while the 64-TFBGA package permits placement on compact, high-density boards.
The STM32L151R8H6 is designed for low-power embedded control, and its internal resources allow firmware, data, and peripheral control to be consolidated into one device. The 32 MHz Cortex-M3 core provides substantially more processing capability than low-clock 8-bit designs, while the STM32L151 family's low-power features are valuable in battery-operated equipment. Its 64 KB Flash capacity is appropriate for USB-connected accessories, sensor controllers, portable instrumentation, and compact automation modules.
Typical applications include USB-to-serial interface equipment, industrial sensor nodes, portable measurement instruments, low-power data loggers, and embedded control boards with limited installation space. The integrated USB capability can reduce the need for an external USB interface controller in designs where USB data and power are required. The 10 KB SRAM and 4 KB EEPROM also support protocol handling, configuration storage, and buffering in connected sensor or control products.
PCB design requires careful attention to the 64-ball TFBGA layout, power-supply decoupling, clock stability, and exposed-pad or ground-ball connections specified by the manufacturer. Place bypass capacitors close to the relevant supply pins, route sensitive clock and communications signals away from high-current switching nodes, and follow the recommended land pattern and reflow profile. Firmware should also validate the device's low-power state transitions and USB enumeration behavior across the intended operating conditions.
This product page consolidates core electrical characteristics, drop-in replacement options, application guidance, comparison parameters, and package-related engineering notes. It helps engineers distinguish electrically similar STM32L1 devices before committing a 64-ball footprint, validate required peripherals, and plan sourcing through the Request a Quote form on this page.
Bộ thay thế dễ dàng lắp đặt cho STM32L151R8H6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L151R8H6 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Mounting Type, Package, Product Type.
STM32L151R8H6A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151R8H6ATR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L152R8H6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L051R8H6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32L151R8H6TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151R8H6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| SRAM | 10 KB |
| EEPROM | 4 KB |
| Điện áp cung cấp hoạt động | 2.5 V or 3.3 V |
| Hộp | 64-TFBGA, 5 mm x 5 mm |
| Số chân | 64 pins |
| Architecture | 32-bit RISC |
| Series | STM32L1 |
| Product Line | STM32L151 |
| Connectivity | Universal Serial Bus (USB) |
| Kiểu lắp đặt | Surface-mount ball-grid array |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân STM32L151R8H6 64-tfbga, 5 mm x 5 mm
Cấu hình chân cho STM32L151R8H6 (64-tfbga, 5 mm x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L151R8H6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L151R8H6 phù hợp cho 6 Áp dụngs: USB Sensor Controller, Industrial Data Logger, Portable Measurement Instrument, USB-to-Serial Interface, Battery-Powered IoT Node, Embedded Automation Controller.
USB Sensor Controller
The STM32L151R8H6 fits a compact USB sensor controller because it combines a 32 MHz ARM Cortex-M3 core with 64 KB of Flash, 10 KB of SRAM, and USB connectivity. The microcontroller can acquire sensor data, apply local filtering, and expose results through USB without requiring a separate interface controller. Its 64-TFBGA package also preserves board area, while the STM32L1 family's low-power orientation supports duty-cycled operation. Confirm the required ADC characteristics, USB clock configuration, and wake-up behavior in the manufacturer documentation.
Được đề xuất
Industrial Data Logger
The STM32L151R8H6 can serve as the control processor in an industrial data logger that stores measurements in its 64 KB Flash and uses 10 KB of SRAM for active buffering. Its 32 MHz Cortex-M3 core provides sufficient instruction throughput for sensor scheduling, timestamp handling, and communication protocol management. The compact 64-TFBGA package is useful in densely populated monitoring equipment. For sustained logging, validate Flash endurance, write timing, data-retention requirements, and the operating-temperature range against the product specification.
Được đề xuất
Portable Measurement Instrument
The STM32L151R8H6 is appropriate for portable measurement instruments that combine acquisition, local processing, and USB connectivity in a compact assembly. Its 32 MHz Cortex-M3 core handles interrupts and control logic, while 64 KB of Flash accommodates firmware and configuration tables. The 10 KB SRAM supports working buffers, and 4 KB of EEPROM can preserve calibration or setup information when the application requires nonvolatile storage. Low-power mode selection and analog-front-end requirements should be evaluated for the intended battery operating profile.
Được đề xuất
USB-to-Serial Interface
The STM32L151R8H6 can implement a USB-to-serial interface with USB connectivity and the processing resources of a 32 MHz Cortex-M3 core. The 64 KB Flash capacity allows implementation of protocol handling and configuration interfaces, while the 10 KB SRAM supports buffering between USB and serial traffic. Its 64-TFBGA package is compact enough for space-constrained adapters. Designers should verify USB speed and device-class support, UART feature mapping, and firmware-driver requirements for the exact STM32L151R8H6 configuration.
Được đề xuất
Battery-Powered IoT Node
The STM32L151R8H6 suits battery-powered IoT nodes that need local control and periodic USB connectivity without a high-power application processor. The STM32L1 family's low-power design is combined with a 32 MHz ARM Cortex-M3 core, 64 KB of Flash, and 10 KB of SRAM for lightweight sensor aggregation. Duty-cycling can reduce average consumption, although actual battery life depends on wake-up frequency, sensor load, and USB attachment time. Validate low-power current, wake-up sources, and retention behavior in the application test plan.
Được đề xuất
Embedded Automation Controller
The STM32L151R8H6 can act as the central controller in compact automation equipment that requires deterministic peripheral handling and flexible communications. Its 32 MHz Cortex-M3 core supports interrupt-driven control, while 64 KB of Flash provides room for application firmware and USB interface code. The 64-TFBGA package supports high-density board layouts, and the 2.5 V or 3.3 V operating range simplifies integration with conventional embedded power systems. Confirm timer channels, communication peripherals, pin multiplexing, and industrial temperature requirements before schematic release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L151R8H6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L151R8H6A | STM32L151R8H6ATR | STM32L152R8H6 | STM32L051R8H6 | STM32L151R8H6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-TFBGA (5x5 mm) | 64-TFBGA (5x5 mm) | 64-TFBGA (5x5 mm) | 64-TFBGA (5x5 mm) | 64-TFBGA (5x5 mm) | 64-TFBGA (5x5 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB (64K x 8) | 64 KB | 64 KB | 64 KB |
| SRAM | 10 KB | 10 KB | 10 KB | 10 KB | 10 KB | 10 KB |
| EEPROM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Operating Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
Bảo phân biệt quan trọng
- USB connectivity within a compact low-power Cortex-M3 platform (vsSTM32L051R8H6)
- 64 KB Flash with a 32 MHz processing core (vsSTM32L152R8H6)
- Exact ordering-grade choice within the same core and package (vsSTM32L151R8H6A)
- Production reel ordering without a package-footprint change (vsSTM32L151R8H6TR)
Ghi chú thiết kế
Treat the 64-TFBGA footprint as a high-density assembly task. Follow the manufacturer's recommended land pattern, pad dimensions, solder-mask profile, and reflow profile exactly. Place the device's supply bypass capacitors adjacent to the relevant power balls, provide a continuous return path beneath the device where the package construction allows it, and inspect assembled boards for bridging between the closely spaced balls before functional testing.
Decouple each required supply rail according to the manufacturer reference circuit rather than relying on a generic capacitor arrangement. Keep the high-frequency bypass path short and connect it to an appropriate ground reference, especially for the 32 MHz clock and USB transceiver domains. Validate startup behavior under both 2.5 V and 3.3 V operation if the product supports both nominal rails, and include controlled test points for measuring active and low-power current.
A shared package does not make every STM32L1 ordering code a functionally identical substitute. Before replacing STM32L151R8H6, verify the alternate-function mapping, USB implementation, timer channels, analog peripherals, startup behavior, Flash organization, and required software support. Pay particular attention to the H6A temperature-grade option and to ATR or TR shipping suffixes, which affect ordering or packaging rather than adding a new application function.
Route the clock input and USB differential pair as controlled-impedance nets using the manufacturer's layout guidance. Keep USB traces short, continuous, and away from switching power stages and noisy digital edges. Confirm the crystal or external clock arrangement and its load components from the exact device documentation, then perform signal-integrity and USB compliance testing on the assembled board rather than relying only on functional enumeration.
Thông tin tuân thủ
The STM32L151R8H6 is identified as RoHS-compliant. No additional REACH, halogen-free, conflict-minerals, or automotive qualification claims were established.