STM32L452RCI6 - 80MHz Cortex-M4 256KB MCU | ST
MPN: STM32L452RCI6 ✓ Hoạt độngSTM32L452RCI6 Tóm tắt
An ultra-low-power microcontroller is a semiconductor device designed to maintain processing capability while minimizing energy consumption during active operation, standby, and low-power modes. The STM32L4 family belongs to the Arm Cortex-M4 MCU, 32-bit microcontroller, embedded processor, and power-managed semiconductor hierarchy. It is suited to products that must process sensor information, control interfaces, or communicate over USB while operating from compact batteries or energy-limited industrial supplies.
Key features include an Arm Cortex-M4 32-bit RISC core, a maximum operating frequency of 80 MHz, and 256 KB of Flash program memory. The device also includes USB Device support, an integrated floating-point unit for efficient arithmetic operations, and a peripheral set designed for low-power embedded control. Its 64-UFBGA package measures 5 x 5 mm, supporting compact layouts where a larger leaded package would be impractical.
The 80 MHz Cortex-M4 core provides substantially more arithmetic throughput than lower-frequency microcontrollers while retaining the efficient instruction set and low-power behavior expected from the STM32L4 family. The integrated floating-point unit accelerates single-precision calculations without requiring a separate math accelerator, making the MCU suitable for real-time filtering, control loops, and general signal-processing tasks.
Typical applications include USB-connected data loggers, compact industrial sensors, low-power building controllers, portable measurement equipment, and battery-operated IoT devices. The USB interface can simplify direct connectivity to a host computer, while the small UFBGA package supports dense boards and compact instrument housings. Developers must also account for high-density BGA assembly requirements, exposed-pad layout, and appropriate decoupling when creating a new PCB footprint.
For reliable implementation, follow the pin-description table and land-pattern guidance in the manufacturer datasheet. Place every supply pin with its recommended local decoupling, provide a continuous ground reference beneath the device where supported by the package design, and validate the board assembly process before production. Firmware should use the documented low-power modes and preserve required GPIO, debug, and clock connections during shutdown states.
This page combines the manufacturer specifications, procurement details, package information, confirmed family alternatives, application guidance, and engineering considerations needed to evaluate the STM32L452RCI6 before schematic capture, PCB layout, and prototype assembly.
Bộ thay thế dễ dàng lắp đặt cho STM32L452RCI6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L452RCI6 (cùng hình factor và footprint) — khác nhau ở Package.
STM32L452RBI6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L452REI6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L452RCI6 Tỷ lệ tối đa & tính chất điện
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Peak Core Performance | Up to 100 DMIPS |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| USB Controller | USB Device |
| Floating-Point Unit | Integrated |
| Hộp | 64-UFBGA, 5 x 5 mm |
| Kiểu lắp đặt | Surface mount |
| Số chân | 64 pins |
Hướng dẫn cấu hình chân STM32L452RCI6 64-ufbga, 5 x 5 mm
Cấu hình chân cho STM32L452RCI6 (64-ufbga, 5 x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L452RCI6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L452RCI6 phù hợp cho 6 Áp dụngs: USB-Connected Data Logger, Industrial Sensor Node, Battery-Powered IoT Controller, Low-Power Building Control, Portable Measurement Instrument, Real-Time Control Module.
USB-Connected Data Logger
The STM32L452RCI6 fits USB-connected data loggers because it combines an 80 MHz Arm Cortex-M4 core with a USB Device controller and 256 KB of Flash. The core can sample sensors, perform filtering, and format records while the integrated USB interface handles direct host communication. Its 5 x 5 mm 64-UFBGA package also limits board area in portable logging equipment. Design the supply rail for both active acquisition and USB-suspend states, and confirm that the chosen USB connector, series resistance, and ESD strategy match the device requirements.
Được đề xuất
Industrial Sensor Node
The STM32L452RCI6 is appropriate for compact industrial sensor nodes requiring local processing, USB maintenance access, and low-power operation. Its 80 MHz Cortex-M4 core can combine multiple sensor inputs, apply digital filtering, and manage alarms without a higher-power processor, while 256 KB of Flash supports device firmware and calibration logic. The small 64-UFBGA footprint supports densely populated instrumentation, but an industrial implementation must include suitable input protection, calibrated sensing paths, and a power design that accommodates the chosen operating mode.
Được đề xuất
Battery-Powered IoT Controller
The STM32L452RCI6 suits battery-powered IoT controllers because the STM32L4 family is positioned for ultra-low-power operation and the MCU includes USB Device connectivity for configuration or maintenance. At 80 MHz, the Cortex-M4 core can handle protocol framing, sensor fusion, and local control while retaining enough Flash for a compact application. The 64-UFBGA package reduces board area, although low-power design still depends on minimizing active duration, using appropriate sleep states, and ensuring that USB circuitry does not dominate standby current.
Được đề xuất
Low-Power Building Control
The STM32L452RCI6 can serve as the control processor in a low-power building automation node combining environmental sensing, actuator supervision, and USB service access. Its 80 MHz Cortex-M4 performance is ample for scheduling, debouncing, state-machine logic, and communication tasks, while 256 KB of Flash provides room for protocol and configuration data. Its low-power orientation helps manage energy in distributed controllers. The implementation should define behavior for sensor failure, actuator limits, bus errors, and safe recovery after a power interruption.
Được đề xuất
Portable Measurement Instrument
The STM32L452RCI6 is well matched to portable measurement instruments that need real-time acquisition, local processing, and USB connectivity in a small enclosure. The 80 MHz Cortex-M4 core can execute sampling routines, filtering, calibration math, and a user interface while the floating-point unit supports efficient arithmetic. With 256 KB of Flash and a 5 x 5 mm 64-UFBGA package, it supports compact designs without excess board area. A practical instrument design must pair the MCU with precision analog front ends and pay attention to analog-ground isolation, reference stability, and thermal drift.
Được đề xuất
Real-Time Control Module
The STM32L452RCI6 fits real-time control modules that combine deterministic peripheral handling with communications and compact packaging. The 80 MHz Cortex-M4 core and integrated floating-point unit support proportional control, filtering, and coordinate calculations, while USB Device provides a convenient configuration path. The 256 KB Flash configuration supports a substantial application and calibration table. For motor or power-conversion control, validate timer channels, complementary outputs, fault inputs, and analog sensing paths against the manufacturer reference documentation before releasing the schematic.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L452RCI6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L452RBI6 | STM32L452REI6 |
|---|---|---|---|
| Package | 64-UFBGA (5 x 5 mm) | 64-UFBGA (5 x 5 mm) | 64-UFBGA (5 x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 128 KB | 512 KB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| USB Support | USB Device | USB Device | USB Device |
| Floating-Point Unit | Integrated | Integrated | Integrated |
| Power Class | Ultra-low-power MCU | Ultra-low-power MCU | Ultra-low-power MCU |
Bảo phân biệt quan trọng
- Balanced Flash capacity for compact firmware (vsSTM32L452RBI6)
- Lower Flash demand than the larger-memory family option (vsSTM32L452REI6)
- Compact 64-UFBGA implementation (vsSTM32L452RCT6TR)
Ghi chú thiết kế
Create the board footprint from the STM32L452RC manufacturer package drawing rather than adapting a generic UFBGA library. Confirm ball pitch, pad dimensions, solder-mask opening, and paste geometry for the 5 x 5 mm 64-UFBGA package. The exposed-pad arrangement, if used by the land pattern, must be connected exactly as specified, and the assembly house should approve the footprint before fabrication.
Place the required decoupling capacitors adjacent to their corresponding supply balls and keep the supply-current path between the regulator, capacitor, and device as short as practical. Separate analog and digital supply filtering where the datasheet calls for separate pins. Validate startup sequencing, current limits, and brownout behavior across the complete voltage range before production testing.
Route USB D+ and D- as a controlled-impedance pair over a continuous reference plane, with the connector, protection components, and MCU placed to minimize branch stubs. Confirm differential impedance, loss, and ESD-component capacitance using the board stack-up and USB implementation guidance. Debug and oscillator traces should also be kept short and away from switching nodes and high-current return paths.
The 5 x 5 mm package has limited exposed copper compared with a leaded package, so thermal performance depends strongly on PCB construction and the active duty cycle. Use the package thermal data to estimate junction temperature under worst-case clock, voltage, and ambient conditions. Preserve uninterrupted ground and power planes beneath the assembly, avoid enclosure hotspots, and avoid stacking heat-generating components directly below the MCU.
Thông tin tuân thủ
Compliance declarations were not identified in the available product information. Confirm the current declarations with STMicroelectronics using the exact ordering code.