STM32L562CET6 - 110MHz Cortex-M33 MCU | STMicroelectronics
MPN: STM32L562CET6 ✓ Hoạt độngSTM32L562CET6 Tóm tắt
An ultra-low-power microcontroller is a semiconductor designed to execute firmware while minimizing energy consumption during active operation and low-power standby. The STM32L5 family belongs to the hierarchy of microcontrollers, embedded processors, and general-purpose semiconductors. Its combination of Cortex-M33 processing, security features, analog peripherals, and low-power modes targets applications that must balance responsive control, connectivity, and energy efficiency.
The STM32L562CET6 integrates 512 KB of Flash, up to 256 KB of SRAM, an SMPS, and hardware AES and PKA acceleration. Its analog subsystem includes two fast 12-bit ADCs operating at 5 Msps, two comparators, two operational amplifiers, two DAC channels, and an internal voltage-reference buffer. Two general-purpose 32-bit timers, two 16-bit motor-control PWM timers, seven general-purpose 16-bit timers, and two low-power timers support control, acquisition, and timing-intensive designs.
The Cortex-M33 core provides a 32-bit RISC architecture with floating-point capability, while Arm TrustZone isolation supports the separation of secure and non-secure software. The SMPS architecture can support efficient power management, and the cryptographic accelerators improve throughput for AES and public-key operations. Together, these resources allow firmware consolidation in compact embedded products without relying on multiple discrete controllers.
Typical applications include industrial sensor nodes, connected metering equipment, medical monitoring terminals, secure access controls, low-power data loggers, and compact motor-control systems. The 110 MHz operating frequency supports responsive protocol handling and control-loop execution, while the analog peripherals reduce the need for external signal-conditioning components when the application operates within their electrical limits.
PCB design should preserve the decoupling structure and exposed thermal behavior specified by the manufacturer. Place the input and bulk capacitors close to the appropriate supply pins, route sensitive analog inputs away from high-switching-current paths, and validate firmware startup, clock configuration, TrustZone partitioning, and low-power transitions before production release.
This page combines the device architecture, peripheral resources, package details, verified sourcing information, replacement constraints, and practical design guidance. It also distinguishes true pin-compatible substitutions from broader functional alternatives so engineers can assess board impact, peripheral differences, and qualification requirements before changing an MCU.
Bộ thay thế dễ dàng lắp đặt cho STM32L562CET6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
STM32L562CET6QTR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L562CET6 Tỷ lệ tối đa & tính chất điện
| Product Type | Ultra-low-power 32-bit microcontroller |
| Core | Arm Cortex-M33 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 110 MHz |
| Peak Performance | Up to 165 DMIPS |
| Embedded Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| SRAM | Up to 256 KB |
| Floating-Point Unit | Yes |
| Security | Arm TrustZone, AES, and PKA hardware acceleration |
| ADC | 2 x 12-bit, 5 Msps |
| DAC | 2 channels |
| Operational Amplifiers | 2 |
| Comparators | 2 |
| General-Purpose 32-Bit Timers | 2 |
| General-Purpose 16-Bit Timers | 7 |
| Motor-Control PWM Timers | 2 x 16-bit |
| Low-Power Timers | 2 |
| Real-Time Clock | Yes, low-power RTC |
| Internal Voltage Reference | Buffered internal reference |
| Power Supply Architecture | SMPS |
| Hộp | 48-pin LQFP, 7 x 7 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân STM32L562CET6 48-pin lqfp, 7 x 7 mm
Cấu hình chân cho STM32L562CET6 (48-pin lqfp, 7 x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L562CET6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L562CET6 phù hợp cho 6 Áp dụngs: Industrial Sensor and Condition Monitoring, Secure Connected Equipment, Portable Medical Monitoring, Compact Motor Control, Secure Access and Door Control, Battery-Powered Data Loggers.
Industrial Sensor and Condition Monitoring
The STM32L562CET6 fits industrial sensor nodes that must acquire measurements while maintaining a compact, energy-conscious design. Its two 12-bit ADCs operate at up to 5 Msps, enabling rapid sampling of pressure, temperature, vibration, or process signals, while two comparators and two operational amplifiers support threshold detection and front-end conditioning. The 110 MHz Cortex-M33 core can run filtering, local control, communications, and data logging without an external processor. Arm TrustZone can isolate device credentials and update logic from application tasks. Designers should verify analog input ranges, acquisition timing, and low-power mode entry against the application, because the MCU capability alone does not determine achievable battery life.
Được đề xuất
Secure Connected Equipment
The STM32L562CET6 is appropriate for connected industrial and commercial equipment requiring a security-oriented processing platform. Arm TrustZone provides hardware-assisted isolation between secure and non-secure software, while AES and PKA acceleration improves the throughput of supported cryptographic operations. The 110 MHz Cortex-M33 core and up to 256 KB of SRAM can support protocol handling, local user-interface logic, and secure services in one device. Firmware can use secure boot and protected storage to strengthen device identity. Integration should include protected key provisioning, authenticated updates, hardened debug settings, and controlled boot flow; the hardware features do not replace those device-level security procedures.
Được đề xuất
Portable Medical Monitoring
The STM32L562CET6 supports compact medical monitoring products that combine sensing, local computation, and low-power operation. Two fast 12-bit ADCs can acquire physiological or sensor signals, while the FPU-enabled Cortex-M33 core handles filtering, feature extraction, and control algorithms. The RTC and low-power timers help coordinate scheduled measurements, and the small 7 x 7 mm LQFP package supports space-constrained portable products. For medical use, analog safety limits, calibration, alarm behavior, electrical isolation, and applicable regulatory requirements must be evaluated independently of the MCU specification. Firmware should also support safe recovery and validated data handling before clinical or diagnostic operation.
Được đề xuất
Compact Motor Control
The STM32L562CET6 can serve as the controller in compact motor-control systems because it combines two dedicated 16-bit PWM timers with two general-purpose 32-bit timers and multiple additional 16-bit timers. Its two comparators support fast control-loop events, two operational amplifiers can assist with current or sensor conditioning, and two DAC channels can provide reference signals. The 110 MHz Cortex-M33 core provides computational headroom for current control, position processing, and communication. The motor power stage remains external, so designers must validate current limits, shoot-through protection, shutdown behavior, thermal performance, and fault handling across the complete drive system rather than relying on MCU resources alone.
Được đề xuất
Secure Access and Door Control
The STM32L562CET6 fits electronic access terminals that combine credential handling, local decision logic, and peripheral control. TrustZone can protect keys and security services from ordinary application code, while AES and PKA hardware acceleration supports authentication and secure communication workloads. The two comparators and fast ADCs can support tamper, proximity, or analog sensor interfaces, while GPIO and timer resources handle readers, indicators, and electromechanical mechanisms. A production design should define secure-boot ownership, debug-lock policy, anti-tamper response, update authentication, and fail-safe behavior for door releases. The internal flash and SRAM should also be allocated so credentials are not copied into unprotected application memory.
Được đề xuất
Battery-Powered Data Loggers
The STM32L562CET6 is appropriate for battery-powered data loggers that periodically record sensor information and communicate the results. Its ultra-low-power STM32L5 architecture, low-power timers, and buffered internal voltage reference support duty-cycled acquisition, while the 512 KB of Flash provides room for firmware, calibration tables, and buffered records. The two 5 Msps ADCs support higher-speed capture when required, and the Cortex-M33 core can compress or process data before transmission. Actual energy performance depends on the selected sleep mode, peripheral shutdown sequence, RTC wake behavior, sensor supply current, and radio duty cycle. Use current profiling on the finished board to establish the achievable interval between battery replacements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L562CET6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L562CET6QTR |
|---|---|---|
| Package | 48-pin LQFP (7 x 7 mm) | 48-pin LQFP (7 x 7 mm) |
| Brand | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M33 | Arm Cortex-M33 |
| Maximum CPU Frequency | 110 MHz | 110 MHz |
| Peak Performance | Up to 165 DMIPS | Up to 165 DMIPS |
| Embedded Flash Memory | 512 KB | 512 KB |
| SRAM | Up to 256 KB | Up to 256 KB |
| ADC Configuration | 2 x 12-bit, 5 Msps | 2 x 12-bit, 5 Msps |
| DAC Channels | 2 channels | 2 channels |
| Security Features | TrustZone, AES, and PKA | TrustZone, AES, and PKA |
| Qualification Suffix | T6 | QTR |
Bảo phân biệt quan trọng
- Combines security and analog processing in one microcontroller (vsSTM32L562CET6QTR)
- Substantial embedded memory for consolidated firmware (vsSTM32L562CET6QTR)
- Dedicated timing resources for control systems (vsSTM32L562CET6QTR)
Ghi chú thiết kế
Place every supply capacitor as close as practical to its associated power and ground pins, following the STM32L562xx manufacturer datasheet layout. Keep the ground-return path short and use a continuous ground plane where the package permits. Treat SMPS, VDDA, VREF+, and analog inputs as distinct nets in the schematic even when they share a source, because their decoupling and return-current requirements can differ.
Validate the complete power tree in stop, standby, and low-power run modes rather than estimating battery life from the maximum clock frequency. Measure sleep current on the populated PCB because regulators, pull networks, sensors, LEDs, and leakage paths can dominate energy use. Configure unused GPIOs and analog inputs according to the manufacturer guidance to avoid floating inputs and unintended current consumption.
Route analog inputs away from switching nodes, high-current motor paths, and clock edges. Use a continuous ground reference beneath sensitive signals, keep ADC traces short, and place anti-alias components close to the source when filtering is required. Check acquisition timing and source impedance against the 5 Msps ADC capability; a fast converter does not compensate for an inadequately driven or poorly referenced input network.
Do not treat a family member with a different suffix as an unconditional substitute. Confirm package drawing, pin functions, exposed or thermal features, power supply limits, clock pins, debug access, flash options, temperature grade, and qualification status for every ordering code. After replacement, rebuild the firmware image, validate clock startup and peripheral initialization, and run brownout, watchdog, and low-power recovery tests on the production hardware.
Thông tin tuân thủ
Compliance status was not established by the manufacturer excerpts or product-page snippets. Confirm the STM32L562xx declarations and the exact ordering suffix with STMicroelectronics before applying the component to a regulated production design.