Microchip Technology

SY88793VKI - 622 Mbps PECL Post Amplifier | Microchip

MPN: SY88793VKI ✗ Cuối đời
3.3 V or 5 V Vdss 10-MSOP, 3.00 mm width Package PECL Speed
MOQ: 1 |

SY88793VKI Tóm tắt

The Microchip Technology SY88793VKI is a single-channel limiting post amplifier designed for PECL data-rate applications up to 622 Mbps, with operation from a 3.3 V or 5 V supply in a 10-MSOP package. It provides low-power PECL outputs, a chatter-free TTL signal-detect output, and a TTL enable input for controlled receiver and transmitter-interface operation.

A limiting post amplifier is a high-speed signal-conditioning device used between a photodiode, optical receiver, or another data source and downstream logic. Its gain stage compensates for attenuation in the signal path, while its limiting behavior produces consistent digital output levels. Within the broader semiconductor hierarchy, the SY88793VKI belongs to the amplifier IC class, specifically the limiting post-amplifier and high-speed communication-interface segment.

Principal features include support for either 3.3 V or 5 V operation, operation through 622 Mbps, low-noise PECL data outputs, TTL-compatible signal detect, and TTL-compatible enable control. The single-channel architecture makes the device suitable for systems requiring one independently controlled receive path rather than a multi-channel retimer. Its surface-mount 10-MSOP package supports compact optical-network and telecommunications equipment.

The signal chain requires careful logic-level compatibility. PECL outputs use a positive-referenced emitter-coupled logic interface, whereas the signal-detect and enable controls accept TTL levels. This mixed-interface arrangement allows an optical receiver to provide a standard digital control signal while presenting differential high-speed data to the following stage. Signal integrity depends on controlled trace impedances, short connection paths, suitable terminations, and compliance with the manufacturer’s reference layout.

Typical uses include 622 Mbps optical receivers, SONET-compatible telecommunications links, high-speed optical network modules, and backplane or point-to-point data interfaces. The enable input can disable the amplifier when the channel is unused, helping limit unnecessary system activity. Signal detect provides an indication that the input channel is active, allowing system logic to distinguish an operational receiver from an inactive one.

Designers should confirm input and output termination, supply decoupling, and control logic timing against the manufacturer datasheet. PECL interfaces require attention to common-mode voltage and termination values, while TTL control inputs require compatible logic thresholds. PCB layout should keep high-speed differential routes short, provide a continuous ground reference, and avoid routing sensitive input paths beneath noisy switching nodes.

This page combines device identification, interface features, application guidance, design cautions, and a structured comparison framework. It also separates documented functions from unspecified electrical details, helping engineers plan receiver architecture, assess legacy availability, and determine whether the original footprint and control scheme can be retained in maintenance or redesign work.

Bộ thay thế dễ dàng lắp đặt cho SY88793VKI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

SY88793VKI Tỷ lệ tối đa & tính chất điện

Product Type Single-channel limiting post amplifier
Maximum Data Rate 622 Mbps
Supply Voltage Options 3.3 V or 5 V
High-Speed Output Interface PECL
Signal Detect Interface TTL
Enable Input Interface TTL
Signal Detect Behavior Chatter-free
Channel Count 1 channel
Gain Control Adjustable
Power Class Low power
Hộp 10-MSOP, 3.00 mm width
Kiểu lắp đặt Surface mount
Trạng thái vòng đời Discontinued
Manufacturer Microchip Technology
Original Manufacturer Micrel Semiconductor

Hướng dẫn cấu hình chân SY88793VKI 10-msop, 3.00 mm width

Cấu hình chân cho SY88793VKI (10-msop, 3.00 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 10-msop, 3.00 mm width cho SY88793VKI

Không có dữ liệu chân cụ thể sẵn có cho SY88793VKI.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SY88793VKI phù hợp cho 6 Áp dụngs: 622 Mbps Optical Receiver Interface, SONET-Class Telecommunications Link, Point-to-Point High-Speed Data Backplane, Optical Network Module Receive Channel, Legacy High-Speed Test Equipment Interface, Industrial High-Speed Sensor Interface.

🌐

622 Mbps Optical Receiver Interface

The SY88793VKI fits a legacy optical receiver path where a photodiode or optical front end requires gain recovery before data reaches a clock-and-data-recovery block. Its limiting post-amplifier architecture supports data rates to 622 Mbps, while the PECL outputs provide the high-speed interface expected by subsequent communications circuitry. The TTL signal-detect output indicates channel activity, and the TTL enable input allows the system to control whether the amplifier is active. Because the device is obsolete, it is most appropriate for maintaining an existing receiver rather than starting a new optical-module design.

🌐

SONET-Class Telecommunications Link

The SY88793VKI is appropriate for legacy telecommunications links operating near the 622 Mbps class because it combines adjustable gain, limiting behavior, and low-noise PECL outputs. It can sit between a recovered line-rate signal and downstream logic, providing repeatable output levels while the TTL enable input controls channel operation. Board integration requires exact PECL termination, compatible common-mode voltage, and careful high-speed routing. The obsolete lifecycle status means the device should normally be selected for equipment repair or functional replication of an established design rather than a new platform.

🖥️

Point-to-Point High-Speed Data Backplane

The SY88793VKI can condition a recovered differential data stream in a point-to-point backplane interface that operates at up to 622 Mbps. Its single-channel arrangement permits a dedicated amplification path when a multi-lane transceiver would be unnecessary, and the TTL enable function provides a simple way to park an unused channel. The PECL outputs must be treated as a controlled high-speed interface, with termination and reference voltage selected from the manufacturer application information. For new backplanes, a current multi-lane interface IC is generally easier to support, but this device remains useful for maintaining established copper links.

🧩

Optical Network Module Receive Channel

The SY88793VKI is specifically suited to an optical-network module receive channel because it supports 622 Mbps operation, low-noise PECL outputs, and a dedicated signal-detect function. The signal-detect output can supervise whether the optical path is active, while the enable input allows the receiver chain to be controlled during power management or fault conditions. Its 10-MSOP surface-mount package supports compact module construction. The design must preserve proper PECL common-mode voltage, termination, decoupling, and controlled differential routing, and the obsolete status should be considered when planning long-term production.

🔧

Legacy High-Speed Test Equipment Interface

The SY88793VKI can serve as a signal-conditioning element in legacy test equipment that must exchange PECL data at rates up to 622 Mbps. Adjustable gain allows the receive path to be aligned with the amplitude presented by a source or channel, while limiting produces a consistent digital signal for downstream detection and measurement circuitry. The TTL enable and signal-detect functions simplify supervisory control over legacy instrumentation. Because full electrical limits and a current pinout are not reproduced here, engineers should implement the exact manufacturer reference circuit and verify timing margins with the intended test system.

🏭

Industrial High-Speed Sensor Interface

The SY88793VKI can condition a legacy industrial sensor or acquisition system that exposes a high-speed PECL stream. Its limiting behavior is useful when the source distance causes amplitude variation, while the 3.3 V or 5 V supply choice permits integration with established industrial logic voltages. The TTL enable input offers direct control from a sensor controller, and signal detect provides a channel-status indication. Practical use requires controlled PCB impedance, appropriate PECL termination, local decoupling, and validation of the source’s output amplitude and jitter; newer acquisition ICs are preferable for new industrial platforms.

What is the SY88793VKI used for?
The SY88793VKI is a single-channel limiting post amplifier for recovering and conditioning high-speed PECL data signals. It operates up to 622 Mbps from either a 3.3 V or 5 V supply and provides low-power PECL outputs with TTL-compatible signal-detect and enable controls. The manufacturer datasheet identifies optical-network reception as a principal application, making the device suitable for legacy high-speed optical communication interfaces.
What is the maximum data rate of the SY88793VKI?
The SY88793VKI supports operation to 622 Mbps. According to the manufacturer datasheet, the amplifier can use either a 3.3 V or 5 V supply while reaching this maximum data rate, depending on the interface implementation and application requirements. Its high-speed section therefore targets legacy SONET-class and optical-network signal paths rather than general-purpose low-speed analog amplification.
Where can I download the SY88793VKI datasheet PDF?
The SY88793VKI datasheet PDF is available from the product-documentation sources linked on this page, including the Microchip-hosted copy indexed by Octopart and the device datasheet hosted by ABC Semiconductor. Use the manufacturer datasheet to verify the complete pin description, recommended application circuit, electrical characteristics, and package drawings before laying out or repairing a board.
Where can I find the SY88793VKI pinout?
The SY88793VKI pinout is documented in the manufacturer datasheet and its 10-MSOP pin-description table. The verified product information confirms a 10-MSOP package but does not expose the individual terminal names or numbering, so this page does not reproduce an inferred pin list. Use the datasheet pin-description table when assigning PCB tracks and confirming signal-detect and enable connections.
Is the SY88793VKI a 3.3 V or 5 V amplifier?
The SY88793VKI supports both 3.3 V and 5 V single-rail operation. The manufacturer datasheet describes a single-supply design capable of 622 Mbps operation at either voltage. The appropriate supply selection should be based on the surrounding PECL interface voltage levels, signal-detect logic requirements, and the electrical limits specified for the chosen operating condition.
What signal and control interfaces does the SY88793VKI provide?
The SY88793VKI provides low-noise PECL data outputs, a chatter-free TTL signal-detect output, and a TTL enable input. These functions allow the high-speed receive channel to communicate through standard PECL data connections while system monitoring and shutdown logic use TTL-compatible levels. The mixed interface structure is characteristic of high-speed optical-receiver support circuitry.
What can replace the SY88793VKI?
A true drop-in replacement must preserve the 10-MSOP footprint, pin functions, PECL output arrangement, TTL signal-detect behavior, TTL enable input, and 622 Mbps operating capability. No distinct substitute with confirmed pin-to-pin compatibility was identified in the cross-reference results. The SY88793VKI-TR listing represents the same device with a different orderable suffix and should not be treated as a separate functional alternative without a confirmed BOM and marking comparison.
Is there a Microchip drop-in replacement for the SY88793VKI?
No distinct Microchip Technology drop-in replacement for the SY88793VKI was confirmed by the available cross-reference results. Compatibility must be established through the 10-MSOP pin assignments, 3.3 V or 5 V supply constraints, 622 Mbps performance, PECL output levels, and TTL control timing. The SY88793VKI-TR orderable suffix is a packaging designation for the same base device rather than an independently characterized substitute.
What is the best equivalent for an SY88793VKI-based optical receiver?
The best equivalent is the device that reproduces all four critical interfaces: the 10-MSOP footprint, 622 Mbps limiting-amplifier performance, TTL enable and signal-detect functions, and PECL output behavior. No cross-brand part with documented pin-to-pin equivalence was confirmed for the SY88793VKI. During receiver redesign, evaluate current retimers or limiting amplifiers as new-design options rather than assuming they can replace this legacy device without board changes.
When should I choose the SY88793VKI over a newer retimer?
Choose the SY88793VKI only when an existing design specifically requires its limiting post-amplifier behavior, 10-MSOP footprint, TTL enable input, TTL signal-detect output, and PECL data interface. A modern retimer is preferable for new designs needing wider standards support, integrated clock and data recovery, observability, or broader supply availability. The obsolete status and restricted modern substitutes make the original device primarily a maintenance-oriented choice.
Is the SY88793VKI suitable for optical network equipment?
The SY88793VKI is suitable for legacy optical-network receiver circuitry because the manufacturer identifies optical networks as an application and specifies operation to 622 Mbps. It conditions the recovered high-speed signal and provides PECL outputs, TTL signal detect, and TTL enable control. Board-level qualification still requires checking optical sensitivity, jitter, termination, power-supply behavior, and system timing.
Does the SY88793VKI require TTL or PECL control signals?
The SY88793VKI uses TTL-compatible logic for its enable input and signal-detect output, while its high-speed data outputs use the PECL interface. The enable input therefore requires a TTL-level control signal, and signal detect can be interpreted by TTL-compatible supervision logic. The high-speed PECL path must be handled according to its reference voltage, termination, and common-mode requirements.
How should PECL outputs be terminated in an SY88793VKI design?
PECL outputs require correct high-speed termination and reference-voltage treatment, but exact resistor values and routing dimensions must come from the manufacturer application information. The SY88793VKI provides low-noise PECL outputs intended for controlled high-speed connections. Keep traces short, maintain a continuous ground reference, avoid unnecessary stubs, and validate the complete transmitter, receiver, and termination arrangement with signal-integrity analysis.
How much power does the SY88793VKI consume?
The SY88793VKI is described as a low-power limiting post amplifier, but a complete supply-current value is not available in the verified product excerpts. Its supply-voltage options are 3.3 V and 5 V, and its power demand depends on the operating mode and enabled or disabled state. Consult the manufacturer datasheet for current versus supply voltage and data rate before sizing the receiver power supply and thermal budget.
Is the SY88793VKI still active?
The SY88793VKI is discontinued and is therefore classified as obsolete. The device remains relevant for maintenance of legacy optical and telecommunications equipment, including systems designed around its 10-MSOP footprint and 622 Mbps PECL interface. New production designs should consider currently supported components with equivalent functions, while existing repairs must account for limited original-equipment availability.
Where can I request a quote for SY88793VKI?
Use the Request a Quote form on this page to request SY88793VKI availability, current lead time, and order quantities. Because the part is obsolete, supply may depend on original-equipment inventory, remaining factory stock, or qualified legacy channels. Provide the exact SY88793VKI orderable MPN, required quantity, and target package or shipment condition when requesting a sourcing response.

Dữ liệu tham khảo kỹ thuật cho SY88793VKI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SY88793VKI for maintenance or functional replication of an established 622 Mbps optical or telecommunications receiver that uses a 10-MSOP limiting post amplifier, PECL data outputs, TTL enable, and TTL signal detect. It is especially appropriate when the existing board layout and control logic cannot be changed and a current device does not reproduce the original interface behavior. Do not select a generic amplifier or retimer as a drop-in substitute without a complete pin, logic-level, timing, and signal-integrity comparison. For new designs, favor an active retimer, limiting amplifier, or multi-lane transceiver with current lifecycle support, broader configuration, and documented test resources. Legacy procurement should specify the exact orderable MPN and confirm package markings, because the obsolete device may be available only through remaining or original-equipment inventory.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 10-MSOP, 3.00 mm width
Brand Microchip Technology
Product Type Single-channel limiting post amplifier
Maximum Data Rate 622 Mbps
Supply Voltage Options 3.3 V or 5 V
High-Speed Output Interface PECL
Signal Detect Interface TTL, chatter-free output
Enable Input TTL
Gain Control Adjustable
Lifecycle Status Discontinued

Bảo phân biệt quan trọng

  • Combines limiting amplification with supervisory controls (vsNo confirmed drop-in alternative)
  • Supports two single-rail voltage choices (vsNo confirmed drop-in alternative)
  • Designed for legacy optical-network signal paths (vsNo confirmed drop-in alternative)

Ghi chú thiết kế

Treat the PECL data path as a controlled high-speed interface rather than a conventional TTL output. Route the differential or paired signals over a continuous ground reference, minimize trace length and stubs, and apply the termination and reference-voltage arrangement specified by the manufacturer. Validate the completed channel with the intended optical source because gain adjustment cannot compensate for excessive jitter, impedance discontinuities, or common-mode errors.

Place input, output, and bypass components close to their associated package terminals, and keep the enable and signal-detect routes away from the high-speed PECL path. The 10-MSOP footprint requires compact, symmetrical routing and adequate solder-pad clearance for assembly inspection. Follow the manufacturer’s land pattern and recommended surface finish rather than inferring dimensions solely from the 3.00 mm package width.

Do not assume that a TTL signal-detect output indicates a valid recovered data stream; it identifies the amplifier’s detected input condition and should be interpreted with the system’s signal-quality tests. Likewise, the TTL enable input does not replace proper supply sequencing or input termination. Verify enable polarity, quiescent behavior, and timing against the device documentation before integrating it into an automatic shutdown scheme.

Use a stable 3.3 V or 5 V rail with local high-frequency decoupling and account for the amplifier’s supply current in both enabled and disabled states. Because the complete current-versus-voltage and data-rate characteristics are not stated in the product excerpts, size the rail from the manufacturer limits and the actual operating mode. Avoid placing the amplifier near converters whose switching harmonics could enter the input or reference network.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The device is a discontinued communications amplifier rather than an automotive-qualified product. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were present in the manufacturer or distributor information used for this record.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SY88793VKI datasheet SY88793VKI pinout SY88793VKI datasheet pdf SY88793VKI equivalent SY88793VKI replacement SY88793VKI cross reference SY88793VKI price SY88793VKI stock Microchip SY88793VKI SY88793VKI 622 Mbps PECL SY88793VKI 10-MSOP SY88793VKI optical receiver

Các bộ phận và thuật ngữ liên quan

Microchip Technology Micrel Semiconductor SY88793VKI limiting post amplifier amplifier IC high-speed communication interface semiconductor PECL TTL 622 Mbps 3.3 V power supply 5 V power supply TTL signal detect TTL enable input adjustable gain 10-MSOP MSOP package family surface-mount package optical networks SONET-class telecommunications signal conditioning PECL termination obsolete component
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ