Microchip Technology

SY89296UMG - 3.2-14.8ns PECL Delay Line | Microchip

MPN: SY89296UMG ✓ Hoạt động
2.5 V or 3.3 V Vdss 32-pin QFN, 5 mm x 5 mm Package
MOQ: 1 |

SY89296UMG Tóm tắt

The Microchip Technology SY89296UMG is a programmable PECL delay line with 1024 taps, a digitally selectable delay range of 3.2 ns to 14.8 ns in 10 ps increments, and a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for applications requiring precise signal-delay calibration within high-speed clock and data-processing systems.

A programmable delay line is a timing IC that applies a controlled propagation delay to an input signal. Its delay is adjusted through a digital control interface, allowing a system to compensate for path-length differences, align clock domains, or create adjustable timing relationships. The SY89296U belongs to the clock and timing IC hierarchy, where delay lines support deterministic signal conditioning rather than signal generation or voltage regulation.

The primary digital control function provides 1024 programmable taps over a 3.2 ns to 14.8 ns range, with each programmed step corresponding to 10 ps. The manufacturer also describes continuous fine tuning over an approximately 40 ps range through an external control voltage. This combination supports coarse digital selection combined with narrow analog adjustment where finer timing resolution is needed.

The device operates as a 2.5 V or 3.3 V PECL delay-line component. PECL uses positive emitter-coupled logic signal levels and is commonly associated with high-speed clock distribution and data-alignment systems. Because the available information does not specify input-output thresholds, control-interface logic levels, temperature range, or propagation-delay tolerances, those characteristics should be confirmed in the manufacturer documentation before final circuit design.

Typical circuit roles include clock-skew compensation, waveform alignment, parallel-channel timing calibration, test-equipment timing adjustment, and delay insertion in high-speed communication paths. Its useful feature is that a fixed-delay network can be redesigned into a programmable element when board-level timing variation must be corrected after assembly.

For implementation, preserve the manufacturer's recommended input and output termination and provide clean, low-jitter references to the control inputs. Confirm whether the fine-tuning control requires a particular source impedance and whether unused control pins must be tied to defined logic levels. Account for package parasitics and board routing delay when calibrating a system.

This product summary combines the confirmed 1024-tap architecture, 3.2 ns to 14.8 ns range, 10 ps digital increment, approximately 40 ps analog tuning range, PECL electrical designation, and 32-pin 5 mm by 5 mm QFN package into an implementation-oriented guide for clock and timing engineers.

Bộ thay thế dễ dàng lắp đặt cho SY89296UMG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SY89296UMG (cùng hình factor và footprint) — khác nhau ở Package, Product Type.

Microchip Technology
Package: 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Product Type: Programmable delay-line integrated circuit
So sánh với SY89296UMG →

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

SY89296UMG Thông số kỹ thuật

Product Type Programmable delay line
Delay Range 3.2 ns to 14.8 ns
Programmable Tap Count 1024 taps
Digital Delay Increment 10 ps per tap
Analog Fine-Tuning Range Approximately 40 ps
Điện áp cung cấp 2.5 V or 3.3 V
Logic Family PECL
Control Method Digital control signal with voltage-based continuous adjustment
Hộp 32-pin QFN, 5 mm x 5 mm
Package Type VQFN with exposed pad
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân SY89296UMG vqfn with exposed pad

Cấu hình chân cho SY89296UMG (vqfn with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân vqfn with exposed pad cho SY89296UMG

Không có dữ liệu chân cụ thể sẵn có cho SY89296UMG.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SY89296UMG phù hợp cho 6 Áp dụngs: Clock Skew Compensation, Parallel Data Alignment, High-Speed Test Equipment Timing, Telecommunications Timing Alignment, Semiconductor Test and Measurement, Instrumentation and Measurement Timing.

⏱️

Clock Skew Compensation

The SY89296UMG can correct clock arrival-time differences between circuit branches by inserting a digitally selected delay from 3.2 ns to 14.8 ns. Its 1024 taps and 10 ps increment allow firmware or control logic to compensate for routing, loading, and component variations discovered during board bring-up. The approximately 40 ps voltage-adjustable interval can provide final trimming when a discrete tap setting cannot meet the required edge relationship. Engineers should reserve clean reference connections for the delay-control inputs and verify the resulting jitter and setup margin at the downstream receiver.

🖥️

Parallel Data Alignment

In parallel data systems, the SY89296UMG can provide per-channel delay adjustment so that logically related signals arrive with a controlled relationship. The 10 ps tap increment supports fine partitioning of the overall 3.2 ns to 14.8 ns range, while the approximately 40 ps continuous tuning range enables final calibration of each path. Because available product information does not specify maximum toggle frequency, jitter, or propagation-delay tolerance, the device should be validated against the required data rate, eye opening, source termination, and receiver thresholds before production use.

🔧

High-Speed Test Equipment Timing

The SY89296UMG is appropriate for calibration and timing-adjustment paths in high-speed test equipment where a repeatable delay must be changed without replacing a fixed network. Digital control allows an instrument to select one of 1024 tap positions, while the approximately 40 ps voltage-controlled range supports fine alignment with a measurement reference. Practical implementation should preserve short, controlled routing around the device and provide stable supply and reference voltages so delay adjustment does not unintentionally alter unrelated system timing.

🌐

Telecommunications Timing Alignment

A programmable delay line can support path-delay equalization in telecommunications and network-interface assemblies where channel lengths or circuit-group delays vary between boards. The SY89296UMG's 3.2 ns to 14.8 ns range and 10 ps digital increment permit systematic alignment of related signals, while continuous tuning over approximately 40 ps supports last-stage correction. For production deployment, engineers must confirm PECL compatibility, input bandwidth, control-code timing, and thermal performance under the specified environmental conditions before treating the delay range as guaranteed across all conditions.

⚡

Semiconductor Test and Measurement

The SY89296UMG can serve as a calibrated timing element in test fixtures intended to stimulate or compare high-speed devices under controlled timing relationships. Rather than accepting fixed delay from long board traces or discrete networks, a test system can program a coarse tap value and use the approximately 40 ps fine-control interval to establish a tighter target. Calibration records should include the selected digital code, control voltage, temperature, and supply condition because those operating factors can influence timing behavior in a real fixture.

📡

Instrumentation and Measurement Timing

For instrumentation requiring repeatable adjustable delays between acquisition, conversion, processing, and output stages, the SY89296UMG provides 1024 digitally selectable positions across 3.2 ns to 14.8 ns. This flexibility is useful when a prototype must accommodate interchangeable sensors, cable lengths, or circuit modules. The approximately 40 ps continuous range enables fine trimming after coarse configuration. Layout should minimize loop area around high-speed signal and control paths, while decoupling and grounding must follow the manufacturer recommendations to avoid introducing supply-dependent delay variation.

What is the function of the SY89296UMG?
The SY89296UMG is a programmable PECL delay line designed to add a digitally controlled delay to an input signal. According to the Microchip Technology SY89296 product page, the device uses 1024 taps to cover a delay range from 3.2 ns to 14.8 ns, with each digital adjustment changing the delay by 10 ps. It also supports continuous voltage-based adjustment over approximately 40 ps, combining coarse digital selection with narrow fine tuning for precision timing calibration.
What is the delay range of SY89296UMG?
The SY89296UMG provides a programmable delay from 3.2 ns to 14.8 ns. The manufacturer describes 1024 digitally selectable taps, and the stated range contains 11,600 ps, which is consistent with 10 ps per tap. An approximately 40 ps continuous tuning interval can additionally be obtained by varying the fine-control voltage. Use the manufacturer pin and control descriptions when assigning the digital and analog adjustment networks.
What supply voltage does SY89296UMG use?
The SY89296UMG is identified as a 2.5 V or 3.3 V PECL delay-line component. The manufacturer product page and distributor technical summaries consistently identify both operating supply choices. Because the available product information does not publish every supply-dependent timing limit, use the manufacturer datasheet to confirm input thresholds, output levels, control-input levels, and decoupling requirements for the specific operating condition.
How many taps are available in SY89296UMG?
The SY89296UMG provides 1024 programmable delay taps. These taps divide the 3.2 ns to 14.8 ns digital delay range into 10 ps increments, allowing a system controller to select a discrete propagation delay. The additional approximately 40 ps voltage-controlled interval can be used for fine correction after the principal tap value has been selected.
Can the SY89296UMG delay be adjusted continuously?
Yes, the SY89296UMG combines digital tap selection with an approximately 40 ps continuous adjustment range. Microchip Technology states that the delay may be varied continuously by setting a control voltage. This is useful when a nominal tap value is close to but not exactly at the required timing relationship. The control-network values and permitted voltage range should be selected using the manufacturer's application guidance.
What package does the SY89296UMG use?
The SY89296UMG uses a 32-pin QFN package measuring 5 mm by 5 mm, with an exposed pad. Distributor listings describe it as a 32-VFQFN with exposed pad, while another package description identifies it as QFN-32 in a 5 mm by 5 mm body. The exposed pad requires a thermal and electrical land pattern defined by the manufacturer package drawing.
Where can I download the SY89296UMG datasheet?
The official SY89296UMG documentation is available through the Microchip Technology SY89296 product page at https://www.microchip.com/en-us/product/SY89296. That page provides the device description and links to manufacturer documentation. The product-page pin description and package drawing should be used when assigning pins, designing the land pattern, and selecting the control and termination networks.
Where is the SY89296UMG pinout located?
The SY89296UMG pinout is documented with the manufacturer product resources for the SY89296 family at https://www.microchip.com/en-us/product/SY89296. Because the complete 32-pin assignment is not reproduced in the distributor summaries, use the manufacturer pin-description table and package drawing when assigning digital control inputs, the fine-tuning input, supply pins, grounds, and the exposed pad.
What can replace the SY89296UMG?
No independently verified drop-in replacement for the SY89296UMG is identified in the available cross-reference material. A replacement should match the 32-pin 5 mm by 5 mm QFN footprint, pin assignment, 1024-tap control interface, 3.2 ns to 14.8 ns delay range, 10 ps digital increment, approximately 40 ps fine-tuning function, and PECL electrical interface. Use the Request a Quote form on this page when sourcing the exact device or requesting package-compatible alternatives.
Is there a cross-brand equivalent to the SY89296UMG?
No cross-brand drop-in equivalent is confirmed by the available manufacturer and distributor information. A functional delay-line IC is not automatically interchangeable because the 32-pin QFN land pattern, control-code mapping, supply levels, PECL thresholds, and delay calibration method must all agree. The Microchip cross-reference search and this page's Request a Quote form can be used to identify any newly qualified alternatives without treating a merely similar timing IC as pin-compatible.
When should I choose the SY89296UMG for clock alignment?
Choose the SY89296UMG when a high-speed design requires a digitally adjustable delay between 3.2 ns and 14.8 ns and can accept a 32-pin QFN implementation. Its 1024 taps provide 10 ps digital resolution, while the approximately 40 ps voltage-controlled range supports final calibration. Confirm input bandwidth, jitter, control timing, and PECL compatibility before selecting it for a particular clock rate.
Is the SY89296UMG suitable for data-alignment applications?
The SY89296UMG is suitable for data-alignment circuits that require calibrated insertion delay rather than a fixed passive delay. Digital tap selection can establish the coarse delay, and the approximately 40 ps continuous range can correct residual timing error. Its suitability for a specific data rate also depends on characteristics that are not listed in the product summaries, including maximum input frequency, jitter, and propagation-delay tolerance.
SY89296UMG versus a passive delay line: when is the programmable IC better?
The SY89296UMG is better when timing must be changed after fabrication, calibrated across boards, or trimmed to compensate for routing and component variation. A passive delay line can provide a fixed insertion delay with fewer active functions, but it cannot offer the SY89296UMG's 1024 digitally selected taps or approximately 40 ps continuous adjustment. The trade-off is a more complex 32-pin control and power design.
Where to buy SY89296UMG online?
Use the Request a Quote form on this page to request the exact Microchip Technology SY89296UMG, current availability, and order details. The manufacturer identifies the device as a 32-pin QFN programmable PECL delay line, and distributor records include the UMG ordering designation as well as a separate reel-packaged ordering designation. Confirm the required packaging and manufacturing traceability when placing the order.
What is the lead time for SY89296UMG?
The current lead time and stock status for the SY89296UMG should be obtained through the Request a Quote form on this page. Manufacturer and distributor catalog pages confirm the device and its ordering information, but a catalog listing alone does not establish current factory inventory or a guaranteed delivery date. State the required quantity and preferred packaging when requesting the quotation.
How much does the SY89296UMG cost?
Current commercial terms for the SY89296UMG are shown through the Request a Quote form on this page. Because catalog pricing and availability can change with quantity, packaging, and market conditions, use the form to request a current quotation rather than relying on a historical catalog figure. Include the target quantity, package or reel preference, and required production date in the request.
Is the SY89296UMG currently available?
The SY89296UMG is listed by Microchip Technology and appears in current distributor catalogs, but catalog presence does not by itself guarantee quantity availability. Request current stock and lead time through the Request a Quote form on this page. The exact package designation should also be confirmed because distributor records show both the UMG designation and a separate -TR ordering code.

Dữ liệu tham khảo kỹ thuật cho SY89296UMG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SY89296UMG when a system needs a digitally adjustable PECL delay spanning 3.2 ns to 14.8 ns and can accommodate a 32-pin 5 mm by 5 mm QFN layout. Its 1024 taps at 10 ps increments are valuable for board-level clock or data alignment, while the approximately 40 ps continuous adjustment range supports final calibration. Consider a passive delay line when the timing offset is fixed, simple, and does not need field adjustment; it will generally reduce control complexity. Do not substitute a generic programmable delay line unless its land pattern, pin assignment, control codes, PECL thresholds, delay range, increment, and fine-control function all match. Before committing to the SY89296UMG, verify maximum input frequency, jitter, propagation-delay tolerance, control timing, and environmental limits from the manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Microchip Technology
Package 32-pin QFN, 5 mm x 5 mm
Product Type Programmable delay line
Logic Family PECL
Supply Voltage 2.5 V or 3.3 V
Programmable Taps 1024 taps
Delay Range 3.2 ns to 14.8 ns
Digital Delay Increment 10 ps per tap
Continuous Fine-Tuning Range Approximately 40 ps

Bảo phân biệt quan trọng

  • Fine digital delay partitioning (vsNo qualified drop-in alternative is available)
  • Digital and continuous adjustment combined (vsNo qualified drop-in alternative is available)
  • Compact surface-mount implementation (vsNo qualified drop-in alternative is available)

Ghi chú thiết kế

Keep the delay input, PECL output, supply connections, and digital control traces short and route them away from noisy switching nodes. The 10 ps control resolution makes board propagation and crosstalk relevant at system level, even though those effects are not part of the nominal 3.2 ns to 14.8 ns range. Use a continuous ground reference under the package and connect the exposed pad according to the manufacturer land pattern.

Design input and output termination for the stated 2.5 V or 3.3 V PECL operating condition, and preserve the source and load impedances used for timing calibration. A digital tap selection establishes the coarse delay, but the approximately 40 ps voltage-adjustable interval is sensitive to reference quality. Use a stable low-noise control source and include calibration storage so the same operating code can be reproduced during production testing.

Do not assume that any delay-line IC with a similar range is interchangeable. A valid substitute must match the 32-pin 5 mm by 5 mm QFN land pattern, PECL interface, 1024-tap control organization, 10 ps increment, and approximately 40 ps fine-control function. Also verify every unused control input and exposed-pad connection against the manufacturer pin table before fabrication.

Use separate, short supply and ground paths with local high-frequency bypass capacitance placed close to the device. Although the available product information does not publish a recommended capacitor value, the capacitor selection and stability requirements should come from the manufacturer application guidance. Confirm the 2.5 V or 3.3 V operating condition before evaluating control thresholds, output levels, and timing behavior.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

A distributor category listing mentions RoHS, but the available information does not explicitly state the device's compliance status. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status are not confirmed.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

SY89296UMG datasheet SY89296UMG pinout SY89296UMG datasheet pdf SY89296UMG delay range SY89296UMG 1024 tap SY89296UMG PECL SY89296UMG QFN-32 SY89296UMG equivalent SY89296UMG replacement SY89296UMG cross reference SY89296UMG price SY89296UMG stock Microchip Technology SY89296UMG SY89296UMG application circuit SY89296UMG 10 ps increment

Các bộ phận và thuật ngữ liên quan

Microchip Technology SY89296UMG SY89296 programmable delay line clock and timing IC semiconductor PECL positive emitter-coupled logic 1024 taps 10 ps delay increment 3.2 ns minimum delay 14.8 ns maximum delay approximately 40 ps fine-tuning range QFN-32 5 mm x 5 mm QFN exposed pad surface mount clock skew compensation data alignment test equipment digital control voltage-controlled tuning clock distribution propagation delay
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ