SY89296UMG - 3.2-14.8ns PECL Delay Line | Microchip
MPN: SY89296UMG ✓ فعالSY89296UMG نمای کلی
A programmable delay line is a timing IC that applies a controlled propagation delay to an input signal. Its delay is adjusted through a digital control interface, allowing a system to compensate for path-length differences, align clock domains, or create adjustable timing relationships. The SY89296U belongs to the clock and timing IC hierarchy, where delay lines support deterministic signal conditioning rather than signal generation or voltage regulation.
The primary digital control function provides 1024 programmable taps over a 3.2 ns to 14.8 ns range, with each programmed step corresponding to 10 ps. The manufacturer also describes continuous fine tuning over an approximately 40 ps range through an external control voltage. This combination supports coarse digital selection combined with narrow analog adjustment where finer timing resolution is needed.
The device operates as a 2.5 V or 3.3 V PECL delay-line component. PECL uses positive emitter-coupled logic signal levels and is commonly associated with high-speed clock distribution and data-alignment systems. Because the available information does not specify input-output thresholds, control-interface logic levels, temperature range, or propagation-delay tolerances, those characteristics should be confirmed in the manufacturer documentation before final circuit design.
Typical circuit roles include clock-skew compensation, waveform alignment, parallel-channel timing calibration, test-equipment timing adjustment, and delay insertion in high-speed communication paths. Its useful feature is that a fixed-delay network can be redesigned into a programmable element when board-level timing variation must be corrected after assembly.
For implementation, preserve the manufacturer's recommended input and output termination and provide clean, low-jitter references to the control inputs. Confirm whether the fine-tuning control requires a particular source impedance and whether unused control pins must be tied to defined logic levels. Account for package parasitics and board routing delay when calibrating a system.
This product summary combines the confirmed 1024-tap architecture, 3.2 ns to 14.8 ns range, 10 ps digital increment, approximately 40 ps analog tuning range, PECL electrical designation, and 32-pin 5 mm by 5 mm QFN package into an implementation-oriented guide for clock and timing engineers.
جایگزینهای drop-in برای SY89296UMG — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای SY89296UMG (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Product Type.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینSY89296UMG مشخصات
| Product Type | Programmable delay line |
| Delay Range | 3.2 ns to 14.8 ns |
| Programmable Tap Count | 1024 taps |
| Digital Delay Increment | 10 ps per tap |
| Analog Fine-Tuning Range | Approximately 40 ps |
| ولتاژ تغذیه | 2.5 V or 3.3 V |
| Logic Family | PECL |
| Control Method | Digital control signal with voltage-based continuous adjustment |
| بستهبندی | 32-pin QFN, 5 mm x 5 mm |
| Package Type | VQFN with exposed pad |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین SY89296UMG vqfn with exposed pad
پیکربندی پین برای SY89296UMG (پکیج vqfn with exposed pad). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای SY89296UMG.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SY89296UMG مناسب است برای 6 کاربردs: Clock Skew Compensation, Parallel Data Alignment, High-Speed Test Equipment Timing, Telecommunications Timing Alignment, Semiconductor Test and Measurement, Instrumentation and Measurement Timing.
Clock Skew Compensation
The SY89296UMG can correct clock arrival-time differences between circuit branches by inserting a digitally selected delay from 3.2 ns to 14.8 ns. Its 1024 taps and 10 ps increment allow firmware or control logic to compensate for routing, loading, and component variations discovered during board bring-up. The approximately 40 ps voltage-adjustable interval can provide final trimming when a discrete tap setting cannot meet the required edge relationship. Engineers should reserve clean reference connections for the delay-control inputs and verify the resulting jitter and setup margin at the downstream receiver.
Parallel Data Alignment
In parallel data systems, the SY89296UMG can provide per-channel delay adjustment so that logically related signals arrive with a controlled relationship. The 10 ps tap increment supports fine partitioning of the overall 3.2 ns to 14.8 ns range, while the approximately 40 ps continuous tuning range enables final calibration of each path. Because available product information does not specify maximum toggle frequency, jitter, or propagation-delay tolerance, the device should be validated against the required data rate, eye opening, source termination, and receiver thresholds before production use.
High-Speed Test Equipment Timing
The SY89296UMG is appropriate for calibration and timing-adjustment paths in high-speed test equipment where a repeatable delay must be changed without replacing a fixed network. Digital control allows an instrument to select one of 1024 tap positions, while the approximately 40 ps voltage-controlled range supports fine alignment with a measurement reference. Practical implementation should preserve short, controlled routing around the device and provide stable supply and reference voltages so delay adjustment does not unintentionally alter unrelated system timing.
Telecommunications Timing Alignment
A programmable delay line can support path-delay equalization in telecommunications and network-interface assemblies where channel lengths or circuit-group delays vary between boards. The SY89296UMG's 3.2 ns to 14.8 ns range and 10 ps digital increment permit systematic alignment of related signals, while continuous tuning over approximately 40 ps supports last-stage correction. For production deployment, engineers must confirm PECL compatibility, input bandwidth, control-code timing, and thermal performance under the specified environmental conditions before treating the delay range as guaranteed across all conditions.
Semiconductor Test and Measurement
The SY89296UMG can serve as a calibrated timing element in test fixtures intended to stimulate or compare high-speed devices under controlled timing relationships. Rather than accepting fixed delay from long board traces or discrete networks, a test system can program a coarse tap value and use the approximately 40 ps fine-control interval to establish a tighter target. Calibration records should include the selected digital code, control voltage, temperature, and supply condition because those operating factors can influence timing behavior in a real fixture.
Instrumentation and Measurement Timing
For instrumentation requiring repeatable adjustable delays between acquisition, conversion, processing, and output stages, the SY89296UMG provides 1024 digitally selectable positions across 3.2 ns to 14.8 ns. This flexibility is useful when a prototype must accommodate interchangeable sensors, cable lengths, or circuit modules. The approximately 40 ps continuous range enables fine trimming after coarse configuration. Layout should minimize loop area around high-speed signal and control paths, while decoupling and grounding must follow the manufacturer recommendations to avoid introducing supply-dependent delay variation.
دادههای مرجع مهندسی برای SY89296UMG — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Microchip Technology |
| Package | 32-pin QFN, 5 mm x 5 mm |
| Product Type | Programmable delay line |
| Logic Family | PECL |
| Supply Voltage | 2.5 V or 3.3 V |
| Programmable Taps | 1024 taps |
| Delay Range | 3.2 ns to 14.8 ns |
| Digital Delay Increment | 10 ps per tap |
| Continuous Fine-Tuning Range | Approximately 40 ps |
تفاوتهای کلیدی
- Fine digital delay partitioning (در مقابلNo qualified drop-in alternative is available)
- Digital and continuous adjustment combined (در مقابلNo qualified drop-in alternative is available)
- Compact surface-mount implementation (در مقابلNo qualified drop-in alternative is available)
یادداشتهای طراحی
Keep the delay input, PECL output, supply connections, and digital control traces short and route them away from noisy switching nodes. The 10 ps control resolution makes board propagation and crosstalk relevant at system level, even though those effects are not part of the nominal 3.2 ns to 14.8 ns range. Use a continuous ground reference under the package and connect the exposed pad according to the manufacturer land pattern.
Design input and output termination for the stated 2.5 V or 3.3 V PECL operating condition, and preserve the source and load impedances used for timing calibration. A digital tap selection establishes the coarse delay, but the approximately 40 ps voltage-adjustable interval is sensitive to reference quality. Use a stable low-noise control source and include calibration storage so the same operating code can be reproduced during production testing.
Do not assume that any delay-line IC with a similar range is interchangeable. A valid substitute must match the 32-pin 5 mm by 5 mm QFN land pattern, PECL interface, 1024-tap control organization, 10 ps increment, and approximately 40 ps fine-control function. Also verify every unused control input and exposed-pad connection against the manufacturer pin table before fabrication.
Use separate, short supply and ground paths with local high-frequency bypass capacitance placed close to the device. Although the available product information does not publish a recommended capacitor value, the capacitor selection and stability requirements should come from the manufacturer application guidance. Confirm the 2.5 V or 3.3 V operating condition before evaluating control thresholds, output levels, and timing behavior.
اطلاعات انطباق
A distributor category listing mentions RoHS, but the available information does not explicitly state the device's compliance status. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status are not confirmed.