TAS5036BPFC - 6-Channel Digital Audio PWM Processor | TI
MPN: TAS5036BPFC ✗ Cuối đờiTAS5036BPFC Tóm tắt
A digital audio PWM processor is a specialized signal-processing IC that sits between a digital audio source and the power-conversion stage of an audio system. It can receive serial data from a DSP, S/PDIF receiver, analog-to-digital converter, digital audio processor, or another serial-bus master. The TAS5036BPFC then organizes that digital information into six independently addressed PWM channels for downstream audio amplifiers.
The main feature is its six-channel PWM architecture. Three serial-data inputs allow multiple digital sources or clock arrangements to be accommodated. Supported sampling rates span conventional CD audio at 44.1 kHz through high-resolution 192 kHz operation, making the processor suitable for systems that must accept several common digital-audio formats. The 80-pin TQFP package provides the required control, data, clock, and power connections for a multi-channel implementation.
The serial interface is designed for integration with established digital-audio processing chains. According to the manufacturer datasheet, the slave interface receives information from a DSP, S/PDIF receiver, ADC, or digital audio processor and operates across the listed sample-rate range. This architecture reduces the need to convert digital audio into an analog intermediate signal before the final power-amplifier stage.
Typical uses include powered speakers, home-theater audio, active speakers, digital mixing consoles, surround-sound systems, soundbars, and professional listening equipment. The TAS5036BPFC is most appropriate when six PWM channels, serial digital audio control, and support for high-resolution sample rates are required within one processor.
PCB implementation requires careful routing of serial data, clock, ground, and power connections in the dense 12 x 12 mm TQFP footprint. Follow the pin-description table, recommended decoupling arrangement, and output-stage requirements in the manufacturer datasheet. Confirm external amplifier topology and switching requirements before finalizing the power-stage component values.
This product page combines the verified device identity, package information, digital-audio interface details, sample-rate support, replacement analysis, and practical integration guidance. It is intended to help engineers determine whether the TAS5036BPFC fits an existing six-channel audio architecture before beginning layout and firmware integration.
Bộ thay thế dễ dàng lắp đặt cho TAS5036BPFC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5036BPFC (cùng hình factor và footprint) — khác nhau ở Package.
TAS5036APFC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5036BPFC Tỷ lệ tối đa & tính chất điện
| Product Type | Six-channel digital audio PWM processor |
| Number of Audio Channels | 6 channels |
| Output Architecture | 6-channel PWM |
| Hộp | 80-pin TQFP, 12 x 12 mm |
| Kiểu lắp đặt | Surface mount |
| Serial Data Inputs | 3 inputs |
| Supported Sample Rate | 32 kHz |
| Supported Sample Rate | 44.1 kHz |
| Supported Sample Rate | 48 kHz |
| Supported Sample Rate | 88.2 kHz |
| Supported Sample Rate | 96 kHz |
| Supported Sample Rate | 176.4 kHz |
| Supported Sample Rate | 192 kHz |
| Digital Source Compatibility | DSP, S/PDIF receiver, ADC, digital audio processor, and serial-bus master |
| Device Description | Audio modulator, 6 channel, 80-TQFP (12 x 12 mm) |
Hướng dẫn cấu hình chân TAS5036BPFC 80-pin tqfp, 12 x 12 mm
Cấu hình chân cho TAS5036BPFC (80-pin tqfp, 12 x 12 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5036BPFC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5036BPFC phù hợp cho 6 Áp dụngs: Powered Multi-Channel Speakers, Home Theater Audio Processing, Digital Mixing Console Output, Surround-Sound Amplifier, Active Soundbar Speaker Array, Professional Monitoring Speakers.
Powered Multi-Channel Speakers
The TAS5036BPFC fits a powered-speaker architecture that requires six coordinated PWM channels from one digital controller. Its serial slave interface can accept information from a DSP, ADC, or another serial-bus master, while the supported 44.1 kHz, 48 kHz, 96 kHz, and 192 kHz rates cover several source formats. The processor produces six PWM signals for compatible downstream power stages, avoiding separate channel-control logic. System designers should confirm output-stage topology, filtering, clocking, and thermal limits against the manufacturer datasheet.
Được đề xuất
Home Theater Audio Processing
A home-theater receiver or active speaker network can use the TAS5036BPFC when six digital PWM channels are needed behind a common audio controller. The processor accepts digital information from a DSP, S/PDIF receiver, ADC, or digital audio processor, allowing the source subsystem to remain in the digital domain. Support for 32 kHz through 192 kHz accommodates standard, high-resolution, doubled, and very-high-rate streams. Integration still requires channel mapping, external output amplification, and protection appropriate to each speaker load.
Được đề xuất
Digital Mixing Console Output
The TAS5036BPFC can organize a six-channel digital-audio output section in a mixing console or digital loudspeaker-management system. Its three serial-data inputs provide options for integrating multiple digital sources, while the 80-pin TQFP interface exposes the control and PWM connections required by a complex channel architecture. Sample-rate support from 44.1 kHz to 192 kHz permits operation with studio, broadcast, and high-resolution sources. Designers must define clock synchronization, signal latency, channel routing, and grounding before layout.
Được đề xuất
Surround-Sound Amplifier
For a surround-sound amplifier, the TAS5036BPFC provides a six-channel digital PWM control function when the design uses external power-conversion stages. The digital slave interface can receive channel data from a DSP or S/PDIF receiver, preserving a digital signal path until the output stage. Supported 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz rates allow the controller to participate in common home-cinema source formats. Output-filter design and amplifier thermal performance remain separate engineering considerations.
Được đề xuất
Active Soundbar Speaker Array
A compact soundbar can use the TAS5036BPFC when six distributed speaker channels are driven from a common digital-audio control point. The processor’s 80-pin TQFP package supports the numerous serial-data, clock, control, PWM, and power connections associated with six channels, while its digital slave interface accepts data from a system DSP or ADC. The 44.1 kHz, 48 kHz, and 96 kHz sample rates align with common streaming, optical, and high-resolution sources. Mechanical spacing and thermal separation of the external output stages are critical in a soundbar enclosure.
Được đề xuất
Professional Monitoring Speakers
Professional powered monitors can benefit from the TAS5036BPFC when multiple amplified channels require synchronized digital PWM control. The device accepts serial data from a DSP, S/PDIF receiver, ADC, or other bus master and operates at rates including 44.1 kHz, 48 kHz, 96 kHz, and 192 kHz, supporting both conventional and high-resolution monitoring workflows. Using one six-channel controller can simplify channel coordination, but each external amplifier must satisfy the required PWM waveform, output bandwidth, distortion, and thermal targets.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5036BPFC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5036APFC |
|---|---|---|
| Package | 80-pin TQFP (12 x 12 mm) | 80-pin TQFP (12 x 12 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor |
| Audio Channels | 6 channels | 6 channels |
Bảo phân biệt quan trọng
- Single-device six-channel PWM organization (vsTAS5036APFC)
- Broad digital sample-rate coverage (vsTAS5036APFC)
- Flexible digital-source integration (vsTAS5036APFC)
Ghi chú thiết kế
Route the serial-data and clock nets as controlled-length digital signals and place the processor close to the system source interface. Follow the manufacturer pin table for every power and ground connection. The 80-pin TQFP footprint is dense, so verify pad geometry, solder-mask clearance, paste volume, and exposed-pad assembly requirements against the current package drawing rather than scaling a generic TQFP footprint.
Separate the processor’s supply distribution from downstream amplifier current paths. Follow the datasheet for input, output, and bypass-capacitor values and placement. Keep the digital processor’s return current continuous and route high-current switching returns away from serial-data and clock references. If the external power stage uses PWM switching nodes, constrain those nodes physically and electrically away from the TAS5036BPFC interface.
Do not treat the TAS5036BPFC as a self-contained power amplifier. Its six PWM outputs still require a compatible downstream conversion and output stage, with correct filtering and thermal design. Also avoid assuming that a package suffix change is automatically a drop-in replacement: TAS5036APFC is the documented candidate, while suffix-only ordering variants may differ in temperature, packing, or production history.
Thông tin tuân thủ
No explicit compliance declarations were identified for the exact MPN. The Green Environment-compliant ordering suffix is not treated as proof of RoHS, REACH, halogen-free, or AEC-Q100 status.