TAS5111DADR - 70W Mono Class-D Amplifier | Texas Instruments
MPN: TAS5111DADR ✓ Hoạt độngTAS5111DADR Tóm tắt
A Class-D audio power stage is a switching amplifier topology in which the output transistors operate at high frequency and continuously. Compared with a linear amplifier, this approach can provide higher output power efficiency and lower heat dissipation for the same delivered audio power. Within the power-management hierarchy, the TAS5111DADR converts processed digital audio signals into a bridge-tifferentiated speaker output, requiring careful power-rail and output-filter design.
The primary reported performance feature is 70 W RMS power into a 4-ohm load in bridge-tied-load operation. The device is identified as a one-channel mono Class-D audio amplifier IC, making it appropriate for subwoofers, powered speakers, compact home-theater systems, and single-channel speaker arrangements. Its 32-pin HTSSOP package uses an exposed pad to improve heat transfer from the power stage into the PCB copper area.
The TAS5111 family is intended to work with a digital audio PWM processor rather than accepting conventional analog audio directly. This division of responsibility allows the digital processor to perform filtering, volume control, and modulation before the TAS5111 converts the PWM stream into a high-power analog speaker waveform. The class-D topology also makes efficient use of available supply power, although actual output capability depends on supply voltage, speaker impedance, cooling, and PCB layout.
Typical applications include DVD receivers, home-theater amplifiers, mini and micro component audio systems, and internet music appliances. The monolithic power-stage approach can simplify analog output design compared with a discrete transistor output stage, while its exposed-pad package requires deliberate thermal via and copper-plane implementation to dissipate heat effectively.
For a new design, follow the manufacturer datasheet for power-supply decoupling, LC filter selection, exposed-pad grounding, and speaker-output routing. Treat the published 70 W rating as a controlled test-condition figure rather than a universal continuous-power promise; use the recommended PCB and thermal design to establish the usable power level under the target enclosure temperature.
This product page consolidates the device classification, package information, sourcing options, verified same-package replacement information, application guidance, and design cautions. It also distinguishes documented electrical facts from parameters that require confirmation in the manufacturer datasheet before schematic release or production qualification.
Bộ thay thế dễ dàng lắp đặt cho TAS5111DADR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TAS5111ADADR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TAS5111DADR Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Class-D digital amplifier power stage |
| Channel Configuration | 1 channel (mono) |
| Output Power | 70 W RMS into 4 ohms at BTL |
| Device Description Output Power | 93 W |
| Output Topology | Bridge-tied load (BTL) |
| Minimum Speaker Impedance | 4 ohms |
| Package Type | 32-pin HTSSOP with exposed pad |
| Package Body Width | 6.10 mm |
| Package Pitch | 0.240 inch |
| Kiểu lắp đặt | Surface mount |
| Technology | Digital Class-D switching power stage |
| Required Audio Processing | Compatible digital audio PWM processor |
Hướng dẫn cấu hình chân TAS5111DADR 0.240 inch
Cấu hình chân cho TAS5111DADR (0.240 inch gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5111DADR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5111DADR phù hợp cho 6 Áp dụngs: Home-Theater Subwoofer Power Stage, DVD Receiver Speaker Drive, Compact Internet Music Appliance, Powered Bookshelf Speaker, Mini Audio Component System, Digital Active Speaker.
Home-Theater Subwoofer Power Stage
The TAS5111DADR fits a digitally controlled home-theater subwoofer because it provides a documented 70 W RMS output into a 4-ohm speaker in bridge-tied-load operation. It is paired with a compatible digital audio PWM processor that supplies the required modulation and control signals. The amplifier IC replaces a larger discrete output stage, but its 32-pin HTSSOP exposed pad requires a carefully routed copper area and multiple thermal vias. Actual continuous output in a sealed or compact enclosure will depend on supply voltage, thermal resistance, amplifier efficiency, and speaker tolerance, so the subwoofer enclosure should be validated with the completed PCB rather than relying only on the headline power figure.
Được đề xuất
DVD Receiver Speaker Drive
The TAS5111DADR is suitable for a mono speaker channel in a DVD receiver or compact home-theater amplifier when the signal chain includes a compatible digital audio controller. Its 70 W RMS capability into 4 ohms can serve a powered subwoofer or appropriately rated surround speaker in smaller systems. The class-D topology supports efficient power conversion, while the exposed thermal pad connects the power stage to PCB copper for heat removal. Designers should preserve the manufacturer-recommended output filters and route speaker wiring away from sensitive audio inputs. Before production, compare the continuous-load requirement against the datasheet test conditions and confirm that the receiver enclosure can maintain acceptable junction temperature.
Được đề xuất
Compact Internet Music Appliance
The TAS5111DADR can provide the mono speaker drive stage in a compact internet music appliance that receives digital audio from a network-enabled source. A compatible digital audio processor performs decoding, filtering, and modulation before the TAS5111 supplies the power-amplifier stage. Its documented 70 W RMS output into 4 ohms allows a useful power level for a compact loudspeaker, while integration into a 32-pin HTSSOP reduces board area compared with a discrete output amplifier. Thermal performance remains important because an enclosure can retain heat even when the amplifier topology is efficient. Use the exposed-pad copper and via pattern specified by the manufacturer, and test continuous music playback at the highest expected volume and room temperature.
Được đề xuất
Powered Bookshelf Speaker
The TAS5111DADR is appropriate for a powered bookshelf or compact multimedia speaker that requires more output than a small integrated analog amplifier can deliver efficiently. Its mono Class-D architecture can support a 70 W RMS target into a 4-ohm driver when the test conditions match the application. A digital audio front end allows volume and signal processing to remain separate from the power stage, simplifying analog output design. The principal engineering constraint is heat removal from the 32-pin HTSSOP exposed pad. Lay out a continuous copper region beneath the device, add thermal vias according to the datasheet, and avoid placing heat-generating regulators in the same uninterrupted copper zone. Verify distortion, idle behavior, and protection response in the final enclosure.
Được đề xuất
Mini Audio Component System
The TAS5111DADR can serve as a high-efficiency mono output stage in a mini or micro component audio system. Its class-D power topology is useful when the system must deliver substantial loudspeaker power from a compact enclosure, while the 70 W RMS rating into 4 ohms provides a clear design target. Because the TAS5111 is a digital power stage, it must receive the appropriate PWM audio and control signals rather than a conventional line-level analog waveform. Board partitioning should keep the high-current supply and speaker outputs away from sensitive digital and analog sections. The exposed pad should be tied to the intended thermal and electrical ground structure exactly as specified, and production testing should include sustained output at the intended channel level.
Được đề xuất
Digital Active Speaker
The TAS5111DADR is a practical output stage for a digital active speaker in which a processor controls gain, filtering, and loudspeaker protection ahead of the power converter. The 32-pin HTSSOP device provides a 70 W RMS mono target into a 4-ohm speaker, making it useful for compact powered speakers and subwoofers. The exposed pad allows heat to flow into the board, but a small metal enclosure can raise the junction temperature beyond that of an open test fixture. Validate the output-filter values, speaker impedance, power-supply headroom, and thermal path with the production mechanical design. The same-package TAS5111ADADR may simplify supply planning when a documented, fully qualified replacement is required.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5111DADR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5111ADADR |
|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments |
| Package | 32-pin HTSSOP with exposed pad | 32-pin HTSSOP with exposed pad |
| Channel Configuration | Mono | Mono |
| Amplifier Type | Class-D digital amplifier power stage | Class-D digital amplifier power stage |
| Documented Output Power | 70 W RMS into 4 ohms | 70 W |
| Device Description Rating | 93 W | 93 W |
| Thermal Connection | Exposed pad | Exposed pad |
| Drop-In Status | Baseline device | Direct comparison states consistent terminals and package; complete replacement without package modification |
Bảo phân biệt quan trọng
- Documented same-package replacement route (vsTAS5111ADADR)
- Substantial mono output capability (vsTAS5111ADADR)
- Compact surface-mount integration (vsTAS5111ADADR)
Ghi chú thiết kế
Treat the exposed pad as the primary thermal and electrical connection to the package. Place the TAS5111DADR over a continuous PCB copper region and populate the datasheet-recommended thermal vias, while observing the pad and ground-pin instructions in the pin-description table. Estimated: output dissipation depends on supply voltage, load, efficiency, and signal level, so use the manufacturer’s thermal equations or measured junction temperature rather than assuming that every watt of nominal output becomes heat in the board.
Separate the high-current power loop from the digital audio and control paths. Keep the TAS5111DADR supply bypass capacitors and output-filter components close to their associated pins, use short and appropriately wide copper for speaker outputs, and avoid routing sensitive input traces beneath the power stage or exposed pad. This arrangement reduces switching-node coupling and ground-current-induced noise in the audio path.
Size the power supply and local decoupling for the intended speaker load rather than selecting them from the 70 W RMS headline alone. The class-D output develops a bridge differential voltage across the speaker terminals, and the amplifier requires compatible digital modulation and control signals. Confirm supply limits, startup behavior, output-filter values, and protection functions in the manufacturer datasheet before choosing bulk capacitance or planning system shutdown behavior.
Thông tin tuân thủ
Compliance status was not stated in the cited listing or comparison information. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status against the current manufacturer documentation and the exact ordering code.