TAS5182DCAR - 100W Stereo Class-D Controller | Texas Instruments
MPN: TAS5182DCAR ✗ Cuối đờiTAS5182DCAR Tóm tắt
A Class-D digital amplifier power-stage controller is an integrated signal-processing and gate-control device used in high-power audio systems. Unlike a conventional analog audio amplifier, it does not directly supply the speaker current. Instead, it accepts digital audio information and drives external MOSFET output transistors in a bridge-tied-load arrangement. This controller sits within the broader Class-D amplifier, audio amplifier, integrated-circuit, and power-management hierarchy.
The TAS5182DCAR provides two stereo processing channels and supports an output configuration rated at 100 W × 2 into 6 ohms. Digital inputs suit digital audio sources and digital-to-analog conversion systems, while external MOSFETs allow the power stage to be scaled for the required speaker impedance and output power. Short-circuit and thermal protection functions help the system manage abnormal operating conditions.
The controller incorporates Texas Instruments PurePath technology and is intended to work with discrete bridge-tied-load MOSFET output stages. Its digital control architecture helps reduce the number of external signal-chain components needed around the power stage. The exposed thermal pad provides a direct heat-dissipation path from the controller, although system-level thermal design must also account for the external MOSFETs and their dissipation.
Typical uses include stereo hi-fi audio receivers, powered speakers, home-theater amplifiers, professional audio equipment, and automotive-style multi-zone audio systems. The two-channel architecture allows one controller to manage left and right speaker channels. Designers select external MOSFETs according to rail voltage, output power, switching performance, thermal resistance, and the impedance of the intended speaker network.
PCB layout is critical because high-current MOSFET gates and sensitive digital control signals must be separated. Keep input and power-stage routing compact, provide the datasheet-required local decoupling, connect the exposed pad to the appropriate thermal copper area, and verify gate resistance, dead time, and power-device stability against the reference design. The device is listed as obsolete, so lifecycle planning should account for a qualified redesign path.
This product page combines the confirmed 100 W × 2 Class-D capability, 56-pin HTSSOP construction, protection features, lifecycle status, and verified sourcing references with practical guidance for power-stage layout, thermal management, and obsolete-product replacement planning.
Bộ thay thế dễ dàng lắp đặt cho TAS5182DCAR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5182DCAR (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Product Type, Output Configuration, Typical THD+N.
TAS5182IDCA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5182DCAR Tỷ lệ tối đa & tính chất điện
| Product Type | Digital amplifier power-stage controller |
| Amplifier Class | Class D |
| Channel Count | 2 channels |
| Maximum Output Power | 100 W per channel at 6 ohms |
| Total Rated Output Power | 200 W for stereo operation |
| Speaker Load | 6 ohms |
| Output Topology | Discrete bridge-tied-load MOSFET output stage |
| Input Type | Digital input |
| Kiểu đầu ra | Stereo, 2-channel |
| Protection Features | Short-circuit and thermal protection |
| Shutdown Function | Yes |
| Technology | Texas Instruments PurePath technology |
| Hộp | 56-pin HTSSOP with exposed pad |
| Package Width | 6.10 mm |
| Package Width, Imperial | 0.240 inch |
| Kiểu lắp đặt | Surface-mount SMD |
| Shipping Package | Reel |
| Trạng thái vòng đời | Obsolete |
Hướng dẫn cấu hình chân TAS5182DCAR reel
Cấu hình chân cho TAS5182DCAR (reel gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5182DCAR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5182DCAR phù hợp cho 6 Áp dụngs: Stereo Hi-Fi Speaker Amplifier, Powered Bookshelf Speaker, Home-Theater Multi-Channel Amplifier, Professional Loudspeaker Power Stage, Digital Audio Speaker Module, Automotive Audio Power Amplifier.
Stereo Hi-Fi Speaker Amplifier
The TAS5182DCAR fits a stereo speaker amplifier requiring 100 W × 2 into 6 ohms because each channel controls a discrete bridge-tied-load MOSFET stage. Its digital inputs simplify integration with a digital audio source, while short-circuit and thermal protection support robust operation. The practical benefit is a configurable output stage: MOSFET selection and PCB thermal design determine efficiency and sustained power beyond the controller’s stated 100 W per channel capability. A two-channel topology also reduces the number of separate controllers needed for left and right speakers.
Được đề xuất
Powered Bookshelf Speaker
A compact powered speaker can use the TAS5182DCAR when its two 100 W channels are matched to the speaker network and amplifier enclosure. Placing the controller ahead of external MOSFET bridges preserves digital audio processing close to the power stage and avoids driving speaker current directly through the controller. The 56-pin HTSSOP exposed pad must be connected to a deliberate thermal-copper area. Output power at sustained listening levels should be verified from MOSFET losses, supply voltage, and enclosure temperature rather than relying only on the nominal 100 W per-channel figure.
Được đề xuất
Home-Theater Multi-Channel Amplifier
The TAS5182DCAR can serve as the stereo controller for one amplified channel pair in a home-theater power amplifier. Two-channel control supports conventional left and right speaker outputs, while digital audio inputs suit modern source and decoding architectures. Short-circuit and thermal protection are useful around externally selected MOSFETs, but the protection system must be validated with the actual power devices and load impedances. For multichannel systems, multiple controller sections may be required because each TAS5182DCAR provides two channels.
Được đề xuất
Professional Loudspeaker Power Stage
A professional passive-loudspeaker power stage can use the TAS5182DCAR when the design requires two digitally controlled bridge-tied-load channels at up to 100 W × 2 into 6 ohms. External MOSFETs allow the designer to optimize the output stage for voltage, current, switching loss, and thermal requirements. Digital control reduces the need for a traditional analog input chain, but the amplifier still requires careful grounding and gate-layout isolation. The controller’s thermal and short-circuit protections should be checked against the complete stage rather than treated as a substitute for a correctly rated output network.
Được đề xuất
Digital Audio Speaker Module
The TAS5182DCAR is appropriate for a digital-audio speaker module that accepts processed digital signals and drives discrete speaker transistors. Its two-channel architecture supports stereo operation, and the controller manages the signal path to the bridge-tied-load gates while external MOSFETs handle speaker current. This division of labor is valuable when output power must be adapted through MOSFET selection instead of changing the controller. Module designers must account for digital clock and data integrity, grounding, decoupled supply rails, and the thermal path from the exposed pad.
Được đề xuất
Automotive Audio Power Amplifier
The TAS5182DCAR can form the basis of a two-channel automotive audio amplifier where the system requires digital control and external MOSFET power stages. Its 100 W × 2 into 6 ohms capability can suit high-power speaker loads, while short-circuit and thermal protection functions address critical amplifier fault conditions. Automotive deployment nevertheless requires review of the exact qualification status, temperature range, transient behavior, load-dump protection, and vibration environment. The obsolete lifecycle of TAS5182DCAR makes a new automotive production program particularly dependent on formal sourcing and qualification review.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5182DCAR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5182IDCA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 56-pin HTSSOP with exposed pad | 56-pin HTSSOP with exposed pad |
| Channel Count | 2 channels | 2 channels |
| Amplifier Class | Class D | Class D |
| Maximum Output Power | 100 W per channel at 6 ohms | 100 W per channel at 6 ohms |
| Output Topology | Discrete bridge-tied-load MOSFET output stage | Discrete bridge-tied-load MOSFET output stage |
| Input Type | Digital input | Digital input |
| Protection Features | Short-circuit and thermal protection | Short-circuit and thermal protection |
| Shutdown Function | Yes | Yes |
Bảo phân biệt quan trọng
- Directly supports a 100 W × 2 stereo power-stage configuration (vsTAS5182IDCA)
- Two-channel digital control in one controller (vsTAS5182IDCA)
- Integrated fault-protection functions (vsTAS5182IDCA)
Ghi chú thiết kế
Follow the manufacturer’s recommended layout for the digital inputs, gate-drive outputs, supply connections, and exposed thermal pad. Keep sensitive digital traces away from high-current MOSFET switching nodes, minimize loop area in each bridge-tied-load stage, and place local decoupling at the controller supply pins. The exposed pad is a thermal connection and should be tied to the supply or ground arrangement shown in the manufacturer reference design rather than treated as an unused pin.
Thermal design must cover both the TAS5182DCAR and the external MOSFETs because the controller does not carry the speaker output current directly. Provide continuous copper beneath the 56-pin HTSSOP exposed pad and use the package thermal data to estimate controller dissipation. Separately calculate conduction and switching loss in each MOSFET at the intended rail voltage and load; the combined loss determines enclosure temperature and whether additional heat spreading is required.
Do not infer exact pin behavior from the package name or from the reel suffix. Use the numbered pin-description table in the manufacturer datasheet to verify every signal, power pin, and exposed-pad connection. Also validate the external MOSFET gate resistance, switching-node layout, dead-time behavior, and protection thresholds. A nominally identical controller is not an approved drop-in replacement until electrical, thermal, and qualification checks are complete.
Treat the digital audio interface as a high-speed signal path even though the controller is commonly associated with analog speaker outputs. Use short traces, a continuous reference plane, appropriate source termination where required, and separation from gate-drive and switching-node traces. Confirm clock jitter, data setup and hold requirements, grounding, and power-supply noise margins against the manufacturer timing and layout guidance before releasing the PCB.
Thông tin tuân thủ
The obsolete lifecycle status is confirmed, but no authoritative RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the verified references.