TAS5721DCA - 10W Stereo 2.1 Class-D Amplifier | Texas Instruments
MPN: TAS5721DCA ✓ Hoạt độngTAS5721DCA Tóm tắt
A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to deliver speaker output efficiently. It belongs to the amplifier IC hierarchy, specifically the digital-input audio amplifier and power-amplifier classes. Unlike a conventional linear output stage, its switching architecture is intended to reduce amplifier dissipation while supporting compact, high-output audio systems.
The device supports stereo bridge-tied-load speaker configurations, 2.1 systems containing two satellite speakers and one subwoofer, and parallel bridge-tied-load arrangements. Its digital audio input makes it suitable for systems using a digital audio source, while the open-loop architecture provides a distinct integration path for designs that manage gain or feedback externally.
Key features include 10 W stereo output capability, an 8 V to 26.4 V supply range, digital input, support for 2.0 and 2.1 speaker systems, and integrated headphone or line-driver functionality. The 48-pin HTSSOP package provides the required connections for audio inputs, speaker outputs, control signals, power, and ground. The listed operating-temperature range is 0°C to 85°C.
Typical uses include compact stereo speakers, multimedia speaker systems, sound bars, active subwoofer combinations, and other consumer audio products requiring efficient digital amplification. The 2.1 support is particularly useful when a product must combine left and right satellite speakers with a subwoofer in one amplifier solution.
Designers should verify speaker impedance, power dissipation, thermal performance, decoupling, and output routing against the manufacturer datasheet before layout. The HTSSOP exposed-pad package also requires careful PCB thermal design so heat can spread into the board rather than concentrating beneath the device.
This page combines verified manufacturer and distributor facts with explicit data gaps, practical application guidance, parameter comparisons, and sourcing links. It distinguishes confirmed specifications from information that still requires datasheet verification instead of presenting unverified assumptions as guaranteed performance.
Bộ thay thế dễ dàng lắp đặt cho TAS5721DCA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếTAS5721DCA Tỷ lệ tối đa & tính chất điện
| Product Type | Digital-input Class-D audio amplifier |
| Manufacturer | Texas Instruments |
| Rated Output Power | 10 W |
| Channel Configuration | 2-channel stereo |
| Minimum Supply Voltage | 8 V |
| Maximum Supply Voltage | 26.4 V |
| Audio Input Type | Digital input |
| Amplifier Architecture | Open-loop Class-D |
| Speaker Configuration Support | 2.0 stereo, 2.1, and PBTL |
| Headphone or Line-Driver Support | Yes |
| Audio Processing Features | EQ and DRC |
| Hộp | HTSSOP-48 (DCA) |
| Số lượng chân | 48 pins |
| Khoảng nhiệt độ hoạt động | 0°C to 85°C |
| Điện áp cung cấp | 70 mA |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân TAS5721DCA htssop-48 (dca)
Cấu hình chân cho TAS5721DCA (htssop-48 (dca) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5721DCA.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5721DCA phù hợp cho 6 Áp dụngs: Compact Stereo Speaker System, 2.1 Active Speaker With Subwoofer, Headphone and Line-Level Output, Digital Audio Power Amplifier Module, Consumer Multimedia Speaker, Active Soundbar Speaker.
Compact Stereo Speaker System
The TAS5721DCA fits a compact digital-input stereo speaker because it combines a 10 W stereo output rating with an 8 V to 26.4 V supply range in a 48-pin HTSSOP DCA package. It can support a 2.0 bridge-tied-load speaker arrangement when the product uses a digital audio source. Placing the amplifier close to the speaker connection reduces output-routing requirements while retaining a dedicated Class-D stage for efficient audio power delivery. Actual power into a particular speaker impedance must be confirmed in the manufacturer datasheet.
Được đề xuất
2.1 Active Speaker With Subwoofer
The TAS5721DCA is suitable for a 2.1 active-speaker product because the verified manufacturer information explicitly identifies 2.1 support alongside stereo operation. A system can combine two satellite speakers with a subwoofer while using the amplifier's digital-input architecture for the source connection. This can simplify a mixed analog-and-digital audio product by reducing the number of separate amplifier stages. Channel routing, subwoofer crossover requirements, continuous output power, and speaker impedance must be verified before implementation.
Được đề xuất
Headphone and Line-Level Output
The TAS5721DCA's integrated headphone/line-driver capability makes it relevant to audio products that need a local headphone or line output in addition to powered speakers. A digital source can feed the amplifier while the product switches between speaker playback and headphone monitoring according to its control logic. This integration can reduce separate analog-output circuitry and simplify product firmware. Output-level behavior, headphone-impedance support, click suppression, and signal routing should be confirmed from the manufacturer documentation for the final design.
Được đề xuất
Digital Audio Power Amplifier Module
The TAS5721DCA fits a modular digital audio power stage because it accepts digital input and provides stereo Class-D output from an 8 V to 26.4 V supply. A host processor or digital audio source can deliver the appropriate digital stream while the TAS5721DCA handles power amplification and associated audio processing features. The open-loop architecture may support systems with externally managed gain or feedback, but that arrangement must be implemented exactly as described by Texas Instruments. Decoupling, layout, and the exposed-pad thermal path are especially important in a compact module.
Được đề xuất
Consumer Multimedia Speaker
The TAS5721DCA can be used in consumer multimedia speakers that receive digital audio and require stereo amplification in a restricted enclosure. Its 10 W stereo designation is appropriate for compact desktop or lifestyle speaker systems, while the 8 V to 26.4 V supply range supports common internal power architectures after regulation. The 48-pin HTSSOP package supports integrated routing and power connections, although its thermal performance depends strongly on PCB copper and vias. Speaker impedance, distortion, thermal rise, and enclosure temperature require qualification.
Được đề xuất
Active Soundbar Speaker
The TAS5721DCA is relevant to a soundbar architecture that combines left, right, and subwoofer channels with digital source control. Its 2.1 support can align with the speaker topology, and the integrated headphone/line-driver feature can assist development configurations and local monitoring. The device's Class-D output stage can help reduce amplifier heat relative to inefficient linear solutions in compact products. A production design must confirm whether 2.1 operation uses dedicated channels or parallel outputs and must validate every channel's continuous and peak-power requirement.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5721DCA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | HTSSOP-48 (DCA) |
| Brand | Texas Instruments |
| Rated Output Power | 10 W stereo |
| Supply Voltage Range | 8 V to 26.4 V |
| Audio Input | Digital input |
| Amplifier Architecture | Open-loop Class-D |
| Channel Configuration | 2-channel stereo with 2.1 support |
| Headphone or Line Driver | Supported |
| Operating Temperature | 0°C to 85°C |
| Supply Current | 70 mA |
Bảo phân biệt quan trọng
- Integrated 2.1-channel support (vsTAS5711PHP)
- Digital-input Class-D integration (vsTAS5711PHP)
- Headphone and line-driver capability (vsTAS5711PHP)
Ghi chú thiết kế
Treat the DCA exposed pad as part of the electrical and thermal design. Place thermal vias beneath or near the exposed pad according to the manufacturer land pattern, and provide uninterrupted ground-plane copper where the datasheet permits. Verify the estimated junction temperature using the actual enclosure temperature, measured or datasheet-derived dissipation, and the assembled-board thermal resistance. The verified 10 W rating does not by itself guarantee that the device can dissipate 10 W at the selected supply voltage and speaker load.
Keep the digital audio inputs, speaker outputs, supply connections, and exposed-pad structure consistent with the official Texas Instruments layout guidance. Place local input and output capacitors at the pins specified by the reference design, and keep high-current output-current paths short and wide. Because the supplied web snippets do not specify the full pinout or capacitor values, use the manufacturer datasheet and evaluation-board layout rather than values from an unrelated amplifier.
Do not interpret the 10 W stereo headline as a guaranteed output into every speaker impedance. Power depends on supply voltage, load impedance, channel configuration, thermal conditions, and the manufacturer test configuration. Likewise, the supplied distributor references contain both 10 W and 15 W descriptions, so use the official TAS5721 data for the exact operating mode. Verify BTL, PBTL, and 2.1 wiring to avoid invalid channel combinations or speaker damage.
Thông tin tuân thủ
The supplied verified web results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred.
