THS4503CD - 370 MHz Fully Differential Amplifier | Texas Instruments
MPN: THS4503CD ✓ Hoạt độngTHS4503CD Tóm tắt
A fully differential amplifier is an amplifier that accepts or produces differential signals while providing common-mode control and balanced output behavior. This class of device belongs to the operational-amplifier family and is used where signal integrity, linearity, and balanced signal handling are more important than low cost. The differential architecture helps reduce common-mode noise and supports high-speed analog and mixed-signal systems.
The THS4503CD provides 370 MHz bandwidth and 2800 V/us slew rate, enabling rapid signal transitions and accurate reproduction of high-frequency waveforms. The manufacturer data also identifies IMD3 of -95 dBc at 30 MHz and OIP3 of 51 dBm at 30 MHz, indicating strong linearity for demanding RF and IF signal paths. Output common-mode control allows the output voltage to be adjusted to suit downstream circuitry.
The THS4503 is positioned for high-linearity analog-to-digital conversion, communications, instrumentation, and other applications requiring wideband differential amplification. Its performance can help preserve signal integrity when driving sampling systems or converting balanced signals into a suitable common-mode range. The 8-pin SOIC package provides a conventional surface-mount footprint for prototype and production boards.
When designing around the THS4503CD, use short, controlled-impedance traces and keep the feedback network compact to minimize parasitic capacitance and preserve high-frequency stability. Place supply-decoupling capacitors close to the device, observe the specified supply limits, and verify output common-mode and input/output swing against the downstream device.
This page combines the manufacturer product information with practical application guidance, pin and package references, design notes, and comparison information for engineers evaluating the THS4503CD in wideband differential signal-chain designs.
Bộ thay thế dễ dàng lắp đặt cho THS4503CD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với THS4503CD (cùng hình factor và footprint) — khác nhau ở Package.
THS4503ID
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →THS4502ID
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
THS4503CD Tỷ lệ tối đa & tính chất điện
| Product Type | High-speed fully differential amplifier |
| Number of Amplifiers | 1 circuit |
| Differential Gain | 1.02 dB |
| Bandwidth | 370 MHz |
| Slew Rate | 2800 V/us |
| IMD3 | -95 dBc at 30 MHz |
| OIP3 | 51 dBm at 30 MHz |
| Power Supply Range | 15 V |
| Power Supply Configuration | Single supply or plus/minus 7.5 V |
| Input Offset Voltage | -4 mV |
| Output Common-Mode Control | Yes |
| Khoảng nhiệt độ hoạt động | 0 C to 70 C |
| Hộp | 8-pin SOIC (D) |
| Kiểu lắp đặt | Surface Mount |
| Architecture | Fully differential |
| Applications | High-linearity analog-to-digital conversion |
Hướng dẫn cấu hình chân THS4503CD 8-pin soic (d)
Cấu hình chân cho THS4503CD (8-pin soic (d) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho THS4503CD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
THS4503CD phù hợp cho 6 Áp dụngs: High-Linearity ADC Interface, Communications Receiver Signal Chain, Instrumentation and Test Equipment, Balanced Video and Imaging Signal Conditioning, RF and IF Signal Conditioning, High-Speed Mixed-Signal Interface.
High-Linearity ADC Interface
The THS4503CD fits immediately ahead of a high-speed ADC when the source is balanced and the converter requires a controlled output common-mode level. Its 370 MHz bandwidth and 2800 V/us slew rate allow the amplifier to preserve fast edges instead of rounding them before sampling. The -95 dBc IMD3 and 51 dBm OIP3 figures at 30 MHz support low-distortion operation in wideband conversion systems. Use the output common-mode control to align the differential outputs with the ADC input range, then place the amplifier close to the converter and use controlled-impedance routing for both polarities. Verify input amplitude, output swing, ADC settling requirements, and feedback stability against the manufacturer data before finalizing the interface.
Được đề xuất
Communications Receiver Signal Chain
Use the THS4503CD in a wideband communications receiver when differential RF or IF signals require gain and balanced routing into a later conversion stage. The 370 MHz bandwidth and 2800 V/us slew rate provide useful margin for high-speed envelopes, while the cited IMD3 and OIP3 performance supports low-distortion amplification around 30 MHz. The fully differential architecture helps preserve signal balance and reject common-mode disturbances encountered in cable, board, or mixed-signal environments. Set the differential gain with the feedback network, control the output common-mode for the following device, and maintain controlled impedance through the balanced path. Confirm the receiver's noise, gain, isolation, and output-swing requirements before final component selection.
Được đề xuất
Instrumentation and Test Equipment
The THS4503CD is appropriate for instrumentation front ends that need to preserve high-frequency differential signals without adding substantial distortion. Its 370 MHz bandwidth and 2800 V/us slew rate allow the amplifier to process rapidly changing waveforms, while the fully differential architecture supports balanced measurement and conversion paths. The output common-mode control can simplify interface with downstream analog or mixed-signal circuitry, reducing the need for an extra level-shifting stage. In test equipment, low distortion is valuable because harmonic and intermodulation products can limit the accuracy of the measurement chain. Use short feedback loops, adequate supply bypassing, and symmetrical routing, and evaluate the complete system against the required bandwidth, noise, and common-mode limits.
Được đề xuất
Balanced Video and Imaging Signal Conditioning
THS4503CD can condition balanced high-speed signals in imaging, broadcast, and video-adjacent systems where edge rate and channel balance are important. The 370 MHz bandwidth supports wideband analog signals, and the 2800 V/us slew rate helps preserve fast transitions in differential video paths. Its common-mode control provides a mechanism to match downstream balanced circuitry while maintaining a differential output relationship. Because video systems can be sensitive to timing and impedance discontinuities, use matched traces and a symmetrical component layout, and keep the feedback network away from the input and output routing. Confirm the actual video standard, signal amplitude, permissible common-mode range, and output swing before using the device in a new design.
Được đề xuất
RF and IF Signal Conditioning
The THS4503CD is suitable for RF or IF conditioning stages where a 370 MHz bandwidth amplifier must handle differential signals with low intermodulation distortion. The listed -95 dBc IMD3 and 51 dBm OIP3 at 30 MHz give a useful starting point for evaluating linearity in a communications or frequency-conversion design. The fully differential output also helps maintain balance through a controlled-impedance PCB path and can simplify connection to a mixer, filter, or converter. Match the input and output network to the intended impedance, use the shortest practical routing, and account for the amplifier's gain, output common-mode range, and stability requirements. Validate the complete chain with the actual carrier, modulation, and blocker conditions.
Được đề xuất
High-Speed Mixed-Signal Interface
THS4503CD can provide the analog interface between a high-speed mixed-signal block and an external converter or digital subsystem. Its high bandwidth and slew rate reduce the risk of bandwidth-limiting the analog path, while differential operation helps maintain signal integrity over longer board routes. The output common-mode control can establish the voltage required by a downstream sampling device, and the 15 V-class supply specification supports conventional analog power architectures. The main design concerns are supply decoupling, feedback-loop stability, output swing, and controlled-impedance routing. Keep both differential branches geometrically matched, use the manufacturer's recommended capacitor placement, and verify the interface against the converter's input capacitance and acquisition timing.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho THS4503CD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | THS4503ID | THS4502ID |
|---|---|---|---|
| Package | 8-pin SOIC (D) | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Architecture | Fully differential amplifier | Fully differential amplifier | Differential amplifier |
| Power-Down Capability | No | No | Yes |
Bảo phân biệt quan trọng
- Wideband fully differential signal conditioning (vsTHS4502ID)
- Broad environmental alternative in the same family (vsTHS4503ID)
- No power-down feature for simpler control (vsTHS4502ID)
Ghi chú thiết kế
Keep the THS4503CD input, output, feedback, and supply connections short, and route the differential pair with matched geometry and a continuous reference plane. The 370 MHz bandwidth makes trace inductance, capacitance, and impedance discontinuities significant. Place the feedback components close to the device so parasitic capacitance does not destabilize the high-speed loop, and use a ground plane that remains continuous beneath the analog signal path.
Place the required bypass capacitors directly across the supply pins and connect them to the ground reference with minimal loop area. The 2800 V/us slew rate can demand rapid current transitions from the supply network, so inadequate decoupling may add noise or reduce available output swing. Follow the Texas Instruments recommended capacitor values and layout, and check the power-supply impedance across the full operating frequency range.
Do not treat the 15 V supply description as permission to exceed the device's absolute maximum ratings. Verify the minimum and maximum rail voltage, output common-mode range, input/output swing, and thermal conditions in the current manufacturer data. Also account for the difference between THS4503CD and THS4503ID temperature grades when selecting a replacement for industrial equipment.
Thông tin tuân thủ
Compliance declarations were not identified in the manufacturer product page or search snippets. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Texas Instruments product documentation.