Texas Instruments

THS4503CD - 370 MHz Fully Differential Amplifier | Texas Instruments

MPN: THS4503CD ✓ 啟用中
15 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

THS4503CD 概覽

Texas Instruments THS4503CD is a high-speed fully differential amplifier with 370 MHz bandwidth, 2800 V/us slew rate, and fully differential architecture for high-linearity signal-chain applications. The device is specified for a wide 15 V power-supply range and includes output common-mode control, making it suitable for driving analog-to-digital converters, communications receivers, and other wideband differential circuits. It is packaged in an 8-pin SOIC (D) package.

A fully differential amplifier is an amplifier that accepts or produces differential signals while providing common-mode control and balanced output behavior. This class of device belongs to the operational-amplifier family and is used where signal integrity, linearity, and balanced signal handling are more important than low cost. The differential architecture helps reduce common-mode noise and supports high-speed analog and mixed-signal systems.

The THS4503CD provides 370 MHz bandwidth and 2800 V/us slew rate, enabling rapid signal transitions and accurate reproduction of high-frequency waveforms. The manufacturer data also identifies IMD3 of -95 dBc at 30 MHz and OIP3 of 51 dBm at 30 MHz, indicating strong linearity for demanding RF and IF signal paths. Output common-mode control allows the output voltage to be adjusted to suit downstream circuitry.

The THS4503 is positioned for high-linearity analog-to-digital conversion, communications, instrumentation, and other applications requiring wideband differential amplification. Its performance can help preserve signal integrity when driving sampling systems or converting balanced signals into a suitable common-mode range. The 8-pin SOIC package provides a conventional surface-mount footprint for prototype and production boards.

When designing around the THS4503CD, use short, controlled-impedance traces and keep the feedback network compact to minimize parasitic capacitance and preserve high-frequency stability. Place supply-decoupling capacitors close to the device, observe the specified supply limits, and verify output common-mode and input/output swing against the downstream device.

This page combines the manufacturer product information with practical application guidance, pin and package references, design notes, and comparison information for engineers evaluating the THS4503CD in wideband differential signal-chain designs.

直接替換替代品,適用於 THS4503CD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: THS4503CD (相同外形與佔位) — 差異在於 Package.

Texas Instruments
Package: 8-pin SOIC
比較對象 THS4503CD →

THS4503ID

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Fully differential amplifier · 1 circuit · 1.02 dB · 370 MHz · 2800 V/us · -95 dBc at 30 MHz · 51 dBm at 30 MHz · 14-bit through 40 MHz

聯絡詢價

查看資料表 →

THS4502ID

✅ 直接替換
📦 8-pin SOIC
THS4502 includes power-down capability while THS4503 does not; exact bandwidth, slew-rate, and pin differences require confirmation

📋 參考替代品(不在目錄中)

THS4503CD 最大額定值與電氣特性

Product Type High-speed fully differential amplifier
Number of Amplifiers 1 circuit
Differential Gain 1.02 dB
Bandwidth 370 MHz
Slew Rate 2800 V/us
IMD3 -95 dBc at 30 MHz
OIP3 51 dBm at 30 MHz
Power Supply Range 15 V
Power Supply Configuration Single supply or plus/minus 7.5 V
Input Offset Voltage -4 mV
Output Common-Mode Control Yes
工作溫度範圍 0 C to 70 C
封裝 8-pin SOIC (D)
安裝類型 Surface Mount
Architecture Fully differential
Applications High-linearity analog-to-digital conversion

THS4503CD 8-pin soic (d) 腳位配置指南

THS4503CD(8-pin soic (d) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

THS4503CD 的 8-pin soic (d) 封裝腳位圖

無詳細腳位定義資料: THS4503CD.

請參閱 資料表 以查看完整腳位配置。

典型應用

THS4503CD 適用於 6 應用s: High-Linearity ADC Interface, Communications Receiver Signal Chain, Instrumentation and Test Equipment, Balanced Video and Imaging Signal Conditioning, RF and IF Signal Conditioning, High-Speed Mixed-Signal Interface.

📺

High-Linearity ADC Interface

The THS4503CD fits immediately ahead of a high-speed ADC when the source is balanced and the converter requires a controlled output common-mode level. Its 370 MHz bandwidth and 2800 V/us slew rate allow the amplifier to preserve fast edges instead of rounding them before sampling. The -95 dBc IMD3 and 51 dBm OIP3 figures at 30 MHz support low-distortion operation in wideband conversion systems. Use the output common-mode control to align the differential outputs with the ADC input range, then place the amplifier close to the converter and use controlled-impedance routing for both polarities. Verify input amplitude, output swing, ADC settling requirements, and feedback stability against the manufacturer data before finalizing the interface.

🌐

Communications Receiver Signal Chain

Use the THS4503CD in a wideband communications receiver when differential RF or IF signals require gain and balanced routing into a later conversion stage. The 370 MHz bandwidth and 2800 V/us slew rate provide useful margin for high-speed envelopes, while the cited IMD3 and OIP3 performance supports low-distortion amplification around 30 MHz. The fully differential architecture helps preserve signal balance and reject common-mode disturbances encountered in cable, board, or mixed-signal environments. Set the differential gain with the feedback network, control the output common-mode for the following device, and maintain controlled impedance through the balanced path. Confirm the receiver's noise, gain, isolation, and output-swing requirements before final component selection.

🔧

Instrumentation and Test Equipment

The THS4503CD is appropriate for instrumentation front ends that need to preserve high-frequency differential signals without adding substantial distortion. Its 370 MHz bandwidth and 2800 V/us slew rate allow the amplifier to process rapidly changing waveforms, while the fully differential architecture supports balanced measurement and conversion paths. The output common-mode control can simplify interface with downstream analog or mixed-signal circuitry, reducing the need for an extra level-shifting stage. In test equipment, low distortion is valuable because harmonic and intermodulation products can limit the accuracy of the measurement chain. Use short feedback loops, adequate supply bypassing, and symmetrical routing, and evaluate the complete system against the required bandwidth, noise, and common-mode limits.

📺

Balanced Video and Imaging Signal Conditioning

THS4503CD can condition balanced high-speed signals in imaging, broadcast, and video-adjacent systems where edge rate and channel balance are important. The 370 MHz bandwidth supports wideband analog signals, and the 2800 V/us slew rate helps preserve fast transitions in differential video paths. Its common-mode control provides a mechanism to match downstream balanced circuitry while maintaining a differential output relationship. Because video systems can be sensitive to timing and impedance discontinuities, use matched traces and a symmetrical component layout, and keep the feedback network away from the input and output routing. Confirm the actual video standard, signal amplitude, permissible common-mode range, and output swing before using the device in a new design.

🌐

RF and IF Signal Conditioning

The THS4503CD is suitable for RF or IF conditioning stages where a 370 MHz bandwidth amplifier must handle differential signals with low intermodulation distortion. The listed -95 dBc IMD3 and 51 dBm OIP3 at 30 MHz give a useful starting point for evaluating linearity in a communications or frequency-conversion design. The fully differential output also helps maintain balance through a controlled-impedance PCB path and can simplify connection to a mixer, filter, or converter. Match the input and output network to the intended impedance, use the shortest practical routing, and account for the amplifier's gain, output common-mode range, and stability requirements. Validate the complete chain with the actual carrier, modulation, and blocker conditions.

🖥️

High-Speed Mixed-Signal Interface

THS4503CD can provide the analog interface between a high-speed mixed-signal block and an external converter or digital subsystem. Its high bandwidth and slew rate reduce the risk of bandwidth-limiting the analog path, while differential operation helps maintain signal integrity over longer board routes. The output common-mode control can establish the voltage required by a downstream sampling device, and the 15 V-class supply specification supports conventional analog power architectures. The main design concerns are supply decoupling, feedback-loop stability, output swing, and controlled-impedance routing. Keep both differential branches geometrically matched, use the manufacturer's recommended capacitor placement, and verify the interface against the converter's input capacitance and acquisition timing.

推薦產品摘要

THS4503ID Texas Instruments 用於: High-Linearity ADC Interface, Communications Receiver Signal Chain, Instrumentation and Test Equipment, Balanced Video and Imaging Signal Conditioning, RF and IF Signal Conditioning, High-Speed Mixed-Signal Interface THS4502ID Related Texas Instruments differential amplifier family 用於: High-Linearity ADC Interface, Instrumentation and Test Equipment, RF and IF Signal Conditioning
What is THS4503CD?
The THS4503CD is a Texas Instruments high-speed fully differential amplifier designed for wideband, low-distortion signal conditioning. According to the Texas Instruments THS4503 product information, it provides 370 MHz bandwidth, 2800 V/us slew rate, fully differential architecture, and output common-mode control in an 8-pin SOIC package. Its combination of speed and linearity makes it suitable for high-linearity ADC interfaces, communications receivers, instrumentation, and other wideband differential circuits.
What are the key specifications of THS4503CD that engineers should know?
The THS4503CD provides 370 MHz bandwidth, 2800 V/us slew rate, 1.02 dB differential gain, -95 dBc IMD3 at 30 MHz, and 51 dBm OIP3 at 30 MHz. The manufacturer identifies a wide 15 V power-supply range and output common-mode control. These figures support wideband differential signal conditioning, while the 8-pin SOIC package and 0 C to 70 C operating range define its mechanical and commercial application envelope.
What is the operating voltage of THS4503CD?
The THS4503CD operates from a nominal 15 V power-supply range and is also identified as supporting plus/minus 7.5 V operation. The product listing describes the device as a single, plus/minus 7.5 V/15 V amplifier. Actual design limits, including the permitted supply range for the selected operating conditions, should be confirmed in the Texas Instruments THS4503 datasheet before finalizing the power architecture.
Is THS4503CD suitable for high-linearity ADC applications?
Yes, the THS4503CD is specifically positioned for high-linearity analog-to-digital conversion. Its 370 MHz bandwidth and 2800 V/us slew rate provide the speed needed for wideband sampling interfaces, while the -95 dBc IMD3 and 51 dBm OIP3 figures at 30 MHz indicate low distortion in the cited frequency range. Output common-mode control adds flexibility when matching the ADC input requirements.
What is the difference between THS4503CD and THS4503ID?
The THS4503CD and THS4503ID are both listed as Texas Instruments fully differential amplifiers with the same 370 MHz bandwidth and 2800 V/us slew-rate class, but their ordering information differs. The comparison information identifies THS4503ID as a -40 C to 85 C part, whereas THS4503CD is listed as a 0 C to 70 C part. Confirm the exact SOIC package, pinout, and electrical limits in the current TI data before substitution.
When should I choose THS4503CD over THS4503ID?
Choose THS4503CD when the design operates within its specified 0 C to 70 C temperature range and the required 8-pin SOIC configuration matches the target board. THS4503ID is the more appropriate choice when the application requires the broader -40 C to 85 C industrial temperature range. The distinction is primarily environmental qualification and ordering configuration; verify supply range, package, and pin compatibility before making the selection.
What is the best drop-in replacement for THS4503CD?
THS4503ID is the closest listed same-brand SOIC alternative for THS4503CD because it is the same high-speed fully differential amplifier family and is listed with the same 370 MHz bandwidth and 2800 V/us slew rate. Its temperature range differs, expanding to -40 C to 85 C, so it is a valid candidate when the wider environmental range is acceptable. Pinout and full electrical details must still be checked before calling it a drop-in replacement.
Can THS4503ID replace THS4503CD?
THS4503ID can serve as a candidate replacement for THS4503CD when the board uses the compatible SOIC configuration and the wider -40 C to 85 C temperature range is acceptable. The listed comparison data identifies both parts as Texas Instruments fully differential amplifiers with 370 MHz bandwidth and 2800 V/us slew rate. Because the public comparison snippet does not provide every pin and limit, confirm the manufacturer data for THS4503ID before production use.
Where can I download the THS4503CD datasheet PDF?
The official Texas Instruments THS4503 product page is the primary location for the THS4503 family documentation and ordering information. The product page identifies the device as an 8-pin SOIC high-speed fully differential amplifier. Search the THS4503 product page for the current datasheet and supporting application information, and use the manufacturer document as the controlling reference for pin assignments, absolute maximum ratings, and recommended operating conditions.
Where can I find the THS4503CD pinout?
The THS4503CD pinout is defined by the Texas Instruments THS4503 family data and its 8-pin SOIC package. Use the pin-description table in the manufacturer data when assigning input, output, supply, and common-mode-control connections. The public product result confirms the 8-pin SOIC configuration but does not reproduce every pin name, so the package drawing and pin table should be checked directly in the current manufacturer documentation.
What is the power-supply requirement for THS4503CD?
The THS4503CD is specified as a 15 V-range device and is also described as operating from plus/minus 7.5 V or a single 15 V supply. In practice, the power rails must meet the absolute maximum and recommended operating conditions in the Texas Instruments data. Use the manufacturer specification for exact minimum and maximum voltages, decoupling, and supply sequencing rather than inferring limits from the headline rating.
How should I decouple the THS4503CD power supply?
Place the required supply-bypass capacitors close to the THS4503CD supply pins and keep the high-frequency current path compact. Good decoupling reduces supply impedance and helps preserve the amplifier's 370 MHz bandwidth and low-distortion performance. Follow the capacitor values and layout shown in the manufacturer data or reference design, and use short ground connections to minimize parasitic inductance.
Is THS4503CD suitable for RF or communications signal paths?
The THS4503CD can suit RF and communications signal paths when the required bandwidth and linearity fit the cited specifications. Its 370 MHz bandwidth and 2800 V/us slew rate support wideband signal amplification, and the -95 dBc IMD3 and 51 dBm OIP3 figures at 30 MHz are useful indicators of low-distortion performance. The actual noise, gain, input impedance, and output-swing requirements must also be checked for the specific receiver chain.
What is the lead time for THS4503CD?
Lead time for THS4503CD depends on current inventory, manufacturing status, and the requested quantity. Request the current lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer product page and ordering information should be used to confirm availability and lifecycle status rather than relying on an outdated distributor snapshot.
Is THS4503CD in stock?
Stock levels for THS4503CD can change by package configuration, quantity, and supplier inventory. Request current availability through the Request a Quote form on this page, and use the manufacturer product page for the authoritative ordering status. The presence of a listing from a distributor or a historical stock count should not be treated as a guaranteed current inventory reservation.
Where can I buy THS4503CD online?
Use the Request a Quote form on this page to request THS4503CD pricing, current inventory, and lead time. XAIPART can confirm the exact Texas Instruments MPN, package code, and order quantity before an order is placed. This approach avoids confusion between THS4503CD and other THS4503 package or temperature-grade variants.
How do I compare THS4503CD with THS4502ID?
THS4503CD is a 370 MHz, 2800 V/us fully differential amplifier in an 8-pin SOIC, while the available comparison listing identifies THS4502ID as another differential amplifier in the same Texas Instruments high-speed family. THS4502 is also described as having power-down capability, whereas THS4503 does not, so the two parts are not automatically interchangeable. Compare pinout, supply behavior, power-down logic, bandwidth, and linearity before selecting a substitute.
What is a THS4503CD application circuit?
A typical THS4503CD application uses the fully differential amplifier as the input stage of a balanced high-speed signal chain, with feedback components setting the differential gain and an output common-mode control network biasing the differential outputs for the next stage. The circuit is useful ahead of an ADC or within communications and instrumentation systems. Exact resistor, capacitor, and termination values should follow the Texas Instruments data and reference layouts.

工程參考資料,適用於 THS4503CD — 比較、設計指引及合規資訊。

選型指南

Choose THS4503CD for a wideband, low-distortion fully differential signal path when the design operates from 0 C to 70 C and requires the listed 370 MHz bandwidth, 2800 V/us slew rate, and output common-mode control. Choose THS4503ID when the same high-speed family and 8-pin SOIC configuration are needed but the wider -40 C to 85 C temperature range is important. Consider THS4502ID only when its power-down function is specifically useful and its complete pinout, electrical ratings, and bandwidth have been verified; its different power-down architecture makes it less direct than THS4503ID. In every case, confirm package pins, supply limits, output swing, common-mode range, and stability before releasing a replacement design.

與替代品比較

參數 本產品 THS4503ID THS4502ID
Package 8-pin SOIC (D) 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Architecture Fully differential amplifier Fully differential amplifier Differential amplifier
Power-Down Capability No No Yes

主要差異化特點

  • Wideband fully differential signal conditioning (對比THS4502ID)
  • Broad environmental alternative in the same family (對比THS4503ID)
  • No power-down feature for simpler control (對比THS4502ID)

設計說明

Keep the THS4503CD input, output, feedback, and supply connections short, and route the differential pair with matched geometry and a continuous reference plane. The 370 MHz bandwidth makes trace inductance, capacitance, and impedance discontinuities significant. Place the feedback components close to the device so parasitic capacitance does not destabilize the high-speed loop, and use a ground plane that remains continuous beneath the analog signal path.

Place the required bypass capacitors directly across the supply pins and connect them to the ground reference with minimal loop area. The 2800 V/us slew rate can demand rapid current transitions from the supply network, so inadequate decoupling may add noise or reduce available output swing. Follow the Texas Instruments recommended capacitor values and layout, and check the power-supply impedance across the full operating frequency range.

Do not treat the 15 V supply description as permission to exceed the device's absolute maximum ratings. Verify the minimum and maximum rail voltage, output common-mode range, input/output swing, and thermal conditions in the current manufacturer data. Also account for the difference between THS4503CD and THS4503ID temperature grades when selecting a replacement for industrial equipment.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations were not identified in the manufacturer product page or search snippets. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Texas Instruments product documentation.

相關搜尋

THS4503CD datasheet THS4503CD pinout THS4503CD datasheet pdf THS4503CD equivalent THS4503CD replacement THS4503CD vs THS4503ID THS4503CD vs THS4502ID THS4503CD application circuit THS4503CD ADC interface THS4503CD 370 MHz amplifier Texas Instruments THS4503CD THS4503CD price THS4503CD stock THS4503CD SOIC-8 THS4503CD fully differential amplifier

相關元件與詞彙

Texas Instruments THS4503CD THS4503ID THS4502ID fully differential amplifier operational amplifier differential amplifier amplifier IC high-speed analog signal chain 370 MHz bandwidth 2800 V/us slew rate output common-mode control IMD3 OIP3 high-linearity ADC interface communications receiver RF signal conditioning IF signal conditioning 8-pin SOIC SOIC family surface-mount package controlled-impedance routing supply bypassing feedback stability RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情