NXP Semiconductors

TJA1055T/3/C - 125 kBd Fault-Tolerant CAN Transceiver | NXP

MPN: TJA1055T/3/C ✗ Cuối đời
330 ohm Rds(on) 14-pin SO (SOIC-14) Package
MOQ: 1 |

TJA1055T/3/C Tóm tắt

The NXP Semiconductors TJA1055T/3/C is an enhanced fault-tolerant Controller Area Network transceiver designed for low-speed passenger-car networks operating up to 125 kBd. It provides differential CAN transmit and receive functions and is intended to interface a CAN protocol controller with the physical CANH and CANL bus wires. The device is offered in a 14-pin SO package for surface-mount PCB assembly.

A CAN transceiver is the physical-layer interface between a digital protocol controller and a differential CAN bus. It converts controller logic levels into balanced bus signals and reconstructs a valid receive signal from the bus. Within the broader hierarchy, the TJA1055T/3/C is a CAN transceiver, a bus interface IC, an interface circuit, and a semiconductor. Its fault-tolerant design is intended to maintain communication when bus faults or unusual bus conditions occur, making it suitable for automotive body, comfort, and other low-speed distributed systems.

The principal documented characteristics include an enhanced fault-tolerant CAN architecture, differential transmission and reception, and operation to 125 kBd. The /3 ordering option is documented in the TJA1055 family as a version with a current source connected to ground for the RTH and RTL pins. Fault-tolerant operation also depends on correctly implementing the resistor network and recessive-state biasing around the transceiver.

NXP describes the TJA1055 family as an interface between the CAN protocol controller and physical bus wires in passenger cars. Its architecture supports low-speed CAN communication while adding fault-tolerance improvements relative to earlier transceivers. The /3 variant provides defined current-source behavior for the RTH and RTL pins, which is important when reproducing the reference termination and bias circuit on an existing PCB.

Typical uses include passenger-car body-control modules, door and window controllers, seat and climate-control electronics, lighting controllers, instrument-cluster peripherals, and other low-speed CAN nodes. Automotive qualification details, exact transceiver timing limits, and the full electrical limits must be checked against the complete NXP data sheet before a new production design is released.

Designers should preserve the established SO-14 footprint and pin assignments when qualifying this device. The termination-bias network, CANH and CANL routing, ground return, and protection components should follow the manufacturer application circuit. Because bus-node behavior depends on both the transceiver and external resistors, changing one network component without checking the complete termination scheme can alter dominant and recessive levels.

This product record combines the verified NXP family description, available ordering-code information, package identification, fault-tolerance characteristics, and practical replacement considerations. It also identifies where complete electrical, environmental, qualification, lifecycle, and pin-function details must be taken directly from the NXP documentation or confirmed with the manufacturer before production release.

Bộ thay thế dễ dàng lắp đặt cho TJA1055T/3/C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TJA1055T/3/C (cùng hình factor và footprint) — khác nhau ở Package, Primary Application.

NXP Semiconductors
Package: Plastic small outline package
Primary Application: Low-speed passenger-car CAN networks
NXP Semiconductors
Package: 14-pin SO

TJA1055T/3/C,512

✅ Drop-In
📦 14-pin SO (SOIC-14)
Same 125 kBd TJA1055T/3 electrical family and 14-pin SO footprint; differs only in the documented manufacturer order suffix, with the ,512 option identified as no longer manufactured

📋 Tham chiếu thay thế (không có trong danh mục)

TJA1055T/3/C,518

✅ Drop-In
📦 14-pin SO (SOIC-14)
Same 125 kBd TJA1055T/3 base device and 14-pin SO footprint; differs in the ,518 order suffix associated with the listed packaging configuration

📋 Tham chiếu thay thế (không có trong danh mục)

TJA1055T/C,518

✅ Drop-In
📦 14-pin SO (SOIC-14)
Same 125 kBd enhanced fault-tolerant TJA1055 family and 14-pin SO footprint; omits the documented /3 current-source ordering identifier, so RTH and RTL bias requirements require schematic verification

📋 Tham chiếu thay thế (không có trong danh mục)

TJA1055T/3/1J

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 14-pin SO (SOIC-14)
Enhanced fault-tolerant CAN transceiver · 125 kBd · 5 V to 28 V · 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, and 28 V · 3 V · Differential · Differential · Up to 125 kBd in passenger cars

Liên hệ để biết giá

Xem tài liệu →

TJA1055T/3/1

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 14-pin SO (SOIC-14)
Enhanced fault-tolerant CAN transceiver · 125 kBd · Supported · 3 V · SSMC wafer fab or ICN8 wafer fab · Plastic small outline package · 14 leads · 3.9 mm

Liên hệ để biết giá

Xem tài liệu →

TJA1055T/3/C Thông số kỹ thuật

Product Type Enhanced fault-tolerant CAN transceiver
Maximum Intended Data Rate 125 kBd
Bus Interface Differential CAN bus
CAN Protocol Controller Area Network (CAN)
Transmit Function Differential CAN transmit
Receive Function Differential CAN receive
Primary Application Low-speed passenger-car networks
Fault Tolerance Enhanced fault-tolerant operation
RTH and RTL Biasing Current source to GND for TJA1055T/3
Hộp 14-pin SO (SOIC-14)
Kiểu lắp đặt Surface mount
Số lượng chân 14 pins
ESD Performance Equal to or better than ±6 kV on CANH, CANL, RTH, and RTL under IEC-61000-4-2 test conditions
IEC-61000-4-2 Test Charge 150 pF
IEC-61000-4-2 Test Resistance 330 ohm
Trạng thái RoHS unknown
REACH Status unknown

Hướng dẫn cấu hình chân TJA1055T/3/C 14-pin so (soic-14)

Cấu hình chân cho TJA1055T/3/C (14-pin so (soic-14) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 14-pin so (soic-14) cho TJA1055T/3/C

Không có dữ liệu chân cụ thể sẵn có cho TJA1055T/3/C.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TJA1055T/3/C phù hợp cho 6 Áp dụngs: Passenger-Car Body Control Module, Door and Window Control ECU, Automotive Lighting Controller, Seat and Climate-Control Module, Instrument-Cluster Peripheral, Legacy Vehicle Communication Retrofit.

🚗

Passenger-Car Body Control Module

The TJA1055T/3/C fits a low-speed passenger-car body-control module that communicates with door, lighting, or climate subsystems over CAN. Its documented 125 kBd maximum intended rate and enhanced fault-tolerant CAN interface suit body networks where wiring faults and node disconnection can occur. The IC handles differential transmission and reception between the controller and CANH/CANL conductors, reducing the number of external bus-driver circuits. Designers should preserve the /3 current-source arrangement around RTH and RTL, because substituting a version with pull-up bias can require different external resistor values.

🚗

Door and Window Control ECU

A door or window controller benefits from the TJA1055T/3/C when its distributed power and signal wiring creates a fault-tolerant low-speed CAN environment. The transceiver's differential bus interface supports communication at the documented 125 kBd ceiling, while the enhanced fault-tolerant family is intended for passenger-car networks. Use the device between the CAN controller and physical bus, and implement the RTH, RTL, CANH, CANL, and ground network exactly as shown in the NXP application circuit. Validate bus timing and fault behavior with the complete module, not only the transceiver test circuit.

💡

Automotive Lighting Controller

The TJA1055T/3/C can serve as the CAN interface for an exterior or interior lighting controller in a passenger vehicle. Lighting modules often occupy distributed positions where harness damage, partial shorts, or unintended bus conditions are relevant concerns. The enhanced fault-tolerant TJA1055 architecture and differential CAN communication are intended to support these low-speed automotive networks up to 125 kBd. The circuit must preserve the manufacturer's termination-bias topology and provide suitable CAN-bus protection; the IC alone does not determine the completed harness's fault tolerance.

🌡️

Seat and Climate-Control Module

Seat-position, HVAC, and climate electronics commonly exchange commands over a low-speed vehicle CAN network, making the TJA1055T/3/C suitable as the controller-to-bus interface. The 125 kBd rating matches the family's stated passenger-car operating focus, while differential reception improves signal integrity across an automotive harness. Keep the CAN bus traces short and controlled where practical, route the pair consistently, and maintain a low-impedance ground return. Confirm module sleep and wake behavior, bus fault responses, and the exact /3 termination network against the complete manufacturer documentation.

📺

Instrument-Cluster Peripheral

A low-speed instrument-cluster peripheral can use the TJA1055T/3/C to connect a CAN controller to the vehicle's differential bus. The component provides the physical transmit and receive functions required by a CAN node, and its fault-tolerant family positioning is appropriate for passenger-car networks operating to 125 kBd. The external RTH and RTL network is essential to the intended operating behavior, especially for the /3 current-source version. Validate propagation delay, wake-up, and bus-off behavior as part of the complete cluster test, because system timing depends on the controller and network configuration.

🔧

Legacy Vehicle Communication Retrofit

The TJA1055T/3/C is relevant when repairing or extending an existing passenger-car CAN network that was designed around the TJA1055 /3 interface. Preserving the established SO-14 footprint and termination circuit reduces PCB modification, provided the source schematic confirms compatible electrical limits and device markings. For a safety-related retrofit, obtain manufacturer traceability and qualification evidence rather than relying only on visual marking comparison. The retrofit should also verify CAN bus speed, node termination, fault behavior, and electromagnetic compatibility under the vehicle's operating environment.

Where can I download the TJA1055T/3/C datasheet PDF?
The official TJA1055 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1055.pdf. It covers the TJA1055 enhanced fault-tolerant CAN transceiver family and is the controlling document for electrical limits, timing, pin functions, application circuits, and ordering information. NXP also provides a product page for TJA1055T. For a new design, use the complete manufacturer document rather than a distributor summary and verify that the selected orderable variant is covered by the documented revision.
What is the TJA1055T/3/C used for?
The TJA1055T/3/C is used as the physical-layer interface between a CAN protocol controller and the CANH and CANL bus conductors. NXP describes the TJA1055 family as an enhanced fault-tolerant transceiver intended primarily for passenger-car networks operating up to 125 kBd. It combines differential CAN transmit and receive functions in a 14-pin SO package, allowing a controller-based module to exchange robust logic-level data with other nodes on a low-speed CAN bus.
How fast is the TJA1055T/3/C CAN transceiver?
The TJA1055T/3/C is primarily intended for CAN communication rates up to 125 kBd. This makes it appropriate for low-speed passenger-car body and comfort networks rather than high-bandwidth vehicle backbone networks. The 125 kBd figure is the maximum intended application rate stated in NXP's TJA1055 family description. Use the complete data sheet for propagation-delay, loop-delay, pulse-width, and maximum-bit-time criteria when validating a specific bus topology and oscillator tolerance.
What is the difference between TJA1055T/3 and TJA1055T?
The principal documented ordering difference is the RTH and RTL bias implementation: TJA1055T/3 uses a current source to ground, while TJA1055T uses a pull-up resistor to VCC. Both belong to the enhanced fault-tolerant TJA1055 family and are associated with the same low-speed CAN use case. The external resistor-network topology must therefore be reviewed before replacing one ordering option with another, even when the IC footprint remains unchanged.
Is the TJA1055T/3/C still manufactured?
The TJA1055 family is a legacy product, and NXP's product information identifies at least the TJA1055T/3/C,512 ordering option as no longer manufactured. This page treats TJA1055T/3/C as obsolete for lifecycle planning. Stock from earlier production runs may still be available through the channel, but new production should not depend on those quantities. Request lifecycle confirmation and traceability information through the Request a Quote form on this page before allocating the part to a new program.
Where can I buy TJA1055T/3/C online?
Use the Request a Quote form on this page to request TJA1055T/3/C availability, legacy sourcing support, and order traceability. The product is an older NXP CAN transceiver, so availability can vary by lot, original order code, and packaging suffix. Include the complete manufacturer ordering code, required package suffix, quantity, and target annual usage in the request. The manufacturer product page can also be used to identify the current family ordering options and lifecycle position.
What is the price of TJA1055T/3/C?
The current commercial price is obtained through the Request a Quote form on this page because legacy transceiver pricing depends on lot availability, order quantity, packaging suffix, and traceability requirements. The structured listing on this page intentionally does not present a static price figure. For a production quotation, provide the exact orderable suffix and expected annual consumption so obsolete-stock sourcing and inspection requirements can be evaluated before an order is placed.
What is the lead time for TJA1055T/3/C?
Lead time for TJA1055T/3/C should be confirmed through the Request a Quote form on this page rather than assumed from generic inventory listings. Because this is a legacy device, lead time depends on the quantity of qualified stock, date-code consistency, traceability documentation, and whether the required order code is still supported. Include production timing, scheduled-build volume, and any inspection requirements in the request to obtain an actionable delivery commitment.
Is TJA1055T/3/C in stock?
Stock for TJA1055T/3/C must be confirmed through the Request a Quote form on this page. The manufacturer product page identifies this family as legacy and includes ordering information that references discontinued configurations. Availability may exist for previously manufactured lots, but quantity and date-code status can change. State the exact suffix, target quantity, acceptable date-code range, and traceability requirement when requesting a current availability response.
What is the best drop-in replacement for TJA1055T/3/C?
The closest documented same-family replacement is another TJA1055 ordering option that preserves the SO-14 footprint and /3 current-source bias arrangement, but every candidate must be checked against the complete pin and termination requirements. The NXP ordering variants TJA1055T/3/C,512 and TJA1055T/3/C,518 are documented references; the latter adds the tape-and-reel order suffix to the same base device. Do not substitute a non-/3 variant without reviewing RTH, RTL, and RTL biasing, because that change can alter the external resistor network.
Can TJA1055T/3/C,518 replace TJA1055T/3/C?
TJA1055T/3/C,518 is the tape-and-reel order suffix associated with the TJA1055T/3/C device and is generally the appropriate choice when the electrical variant is unchanged and only reel packaging differs. The important checks are the base /3 configuration, SO-14 footprint, pin functions, RTH and RTL termination network, and active device markings. Confirm the exact ordering code and package variant on the quotation request before committing an existing PCB design.
When should I choose TJA1055T/3/C instead of a standard CAN transceiver?
Choose TJA1055T/3/C when an existing low-speed automotive CAN design specifically depends on the enhanced fault-tolerant TJA1055 behavior and the /3 current-source arrangement for RTH and RTL. It is most appropriate when preserving a proven SO-14 PCB and its termination network is more important than introducing a newer transceiver architecture. For new platform development, compare the complete family against current fault-tolerant CAN transceivers rather than selecting solely by data rate or package.
Is TJA1055T/3/C suitable for a 125 kBd passenger-car CAN bus?
Yes, TJA1055T/3/C is specifically positioned for low-speed passenger-car CAN networks operating up to 125 kBd. Its suitability depends on using the documented fault-tolerant termination and bias arrangement and meeting the complete data sheet's timing and electrical requirements. Bus length, node count, oscillator tolerance, wiring topology, protective components, and EMC implementation must be evaluated at the system level; transceiver qualification alone does not guarantee network compliance.
What are the key specifications engineers should know about TJA1055T/3/C?
The key TJA1055T/3/C specifications are enhanced fault-tolerant CAN operation, differential transmit and receive, an intended maximum rate of 125 kBd, a 14-pin SO package, and the /3 current-source connection to ground for RTH and RTL. NXP documents ESD performance on CANH, CANL, RTH, and RTL as equal to or better than ±6 kV under IEC-61000-4-2 conditions using a 150 pF charge and 330 ohm resistance. Exact supply, timing, temperature, and qualification limits require the complete data sheet.
What can replace TJA1055T/3/C?
Replacements should begin with the documented TJA1055/3 family ordering options because they preserve the SO-14 footprint and the critical current-source bias behavior. A non-/3 TJA1055 variant may use a pull-up resistor to VCC for RTH and RTL, making it unsuitable without a board or schematic change. No verified cross-brand, pin-compatible replacement is identified in the available sourcing records. For a production migration, submit the schematic, PCB version, termination values, bus speed, and target automotive qualification requirements with the replacement request.

Dữ liệu tham khảo kỹ thuật cho TJA1055T/3/C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TJA1055T/3/C when maintaining an existing passenger-car CAN circuit designed around the enhanced fault-tolerant TJA1055 /3 interface, particularly when preserving the SO-14 footprint and current-source termination arrangement is essential. Use TJA1055T/3/C,512 or TJA1055T/3/C,518 when the exact manufacturer ordering suffix, legacy stock status, and packaging match the approved board documentation. Do not select TJA1055T/C,518 or another non-/3 variant merely because the package is identical; confirm the RTH and RTL bias network because the /3 version uses a current source to ground. For a new vehicle platform rather than a legacy repair, evaluate current NXP fault-tolerant CAN transceivers against all timing, supply, qualification, protection, and lifecycle requirements. If a non-NXP cross-brand replacement is proposed, require evidence of pin compatibility, termination compatibility, ESD behavior, automotive qualification, and lifecycle traceability rather than relying on CAN speed and SOIC-14 package size alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TJA1055T/3/C,512 TJA1055T/3/C,518 TJA1055T/C,518 TJA1055T/3/1J TJA1055T/3/1
Package 14-pin SO (SOIC-14) 14-pin SO (SOIC-14) 14-pin SO (SOIC-14) 14-pin SO (SOIC-14) 14-pin SO (SOIC-14) 14-pin SO (SOIC-14)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Type Enhanced fault-tolerant CAN transceiver Enhanced fault-tolerant CAN transceiver Enhanced fault-tolerant CAN transceiver Enhanced fault-tolerant CAN transceiver TJA1055 family CAN transceiver TJA1055 family CAN transceiver
Maximum Intended Data Rate 125 kBd 125 kBd 125 kBd 125 kBd 125 kBd 125 kBd
Transmit and Receive Function Differential CAN transmit and receive Differential CAN transmit and receive Differential CAN transmit and receive Differential CAN transmit and receive Differential CAN transmit and receive Differential CAN transmit and receive
Primary Application Low-speed passenger-car CAN networks Low-speed passenger-car CAN networks Low-speed passenger-car CAN networks Low-speed passenger-car CAN networks Low-speed passenger-car CAN networks Low-speed passenger-car CAN networks
Fault-Tolerant Positioning Enhanced fault-tolerant Enhanced fault-tolerant Enhanced fault-tolerant Enhanced fault-tolerant Enhanced fault-tolerant Enhanced fault-tolerant

Bảo phân biệt quan trọng

  • Defined current-source biasing for RTH and RTL (vsTJA1055T)
  • Designed for enhanced fault-tolerant passenger-car CAN networks (vsTJA1055T/C,518)
  • Legacy SO-14 footprint preservation (vsTJA1055T/3/C,512)

Ghi chú thiết kế

Do not interchange a TJA1055T/3 ordering option with a non-/3 variant without reviewing the termination network. The documented difference is that the /3 version uses a current source to ground for RTH and RTL, whereas TJA1055T uses a pull-up resistor to VCC. A change in this arrangement can require different external resistor values and may not preserve the intended fault behavior. Make the replacement decision from the original schematic and complete NXP datasheet rather than package marking alone.

Route CANH and CANL as a closely coupled differential pair and provide a continuous ground return to the transceiver. Keep the termination, RTH, RTL, protection, and transceiver connections consistent with the manufacturer application circuit. Avoid long unprotected stubs or routing the bus through areas with unrelated high-current switching paths. PCB-level geometry, connector return paths, and external protection components must be validated together because a compliant transceiver does not by itself guarantee reliable bus operation.

The manufacturer documents ESD testing on CANH, CANL, RTH, and RTL as equal to or better than ±6 kV under IEC-61000-4-2 conditions with C = 150 pF and R = 330 ohm. Treat that performance as one part of the EMC design rather than permission to omit external bus protection. Choose protection devices with suitable capacitance, clamping behavior, and speed, then verify that they do not degrade receiver thresholds, dominant levels, or fault-recovery behavior across the full vehicle harness and operating environment.

Confirm the complete supply and VIO voltage limits, decoupling requirements, and controller interface levels from the current NXP datasheet before reusing the device in a 3.3 V or 5 V logic system. Keep the regulator and decoupling path free of high-current noise sources where possible. Because this is a legacy interface IC, an unseen substitute can differ in startup, supply tolerance, and logic thresholds even when its package and nominal CAN function appear equivalent.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer data sheet documents IEC-61000-4-2 ESD testing for CANH, CANL, RTH, and RTL. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not established by the available product records.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

tja1055t c datasheet TJA1055T/3/C datasheet TJA1055T/3/C pinout TJA1055T/3/C SOIC-14 footprint TJA1055T/3/C equivalent TJA1055T/3/C replacement TJA1055T/3/C drop-in substitute TJA1055T/3/C 125 kBd TJA1055T/3/C CAN transceiver TJA1055T/3/C automotive CAN TJA1055T/3/C price TJA1055T/3/C stock NXP TJA1055T/3/C TJA1055T/3/C RTH RTL circuit

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors TJA1055T/3/C TJA1055T/3/C,512 TJA1055T/3/C,518 TJA1055T/C,518 TJA1055T/3/1J TJA1055T/3/1 Controller Area Network CAN transceiver enhanced fault-tolerant CAN transceiver bus interface IC interface circuit semiconductor 125 kBd differential CAN bus CANH CANL RTH RTL SOIC-14 SO-14 surface mount passenger-car network IEC-61000-4-2 ESD protection
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ