TLE6212XUMA1 - ABS/TC/ESC Sensor Interface IC | Infineon
MPN: TLE6212XUMA1 ✗ Cuối đờiTLE6212XUMA1 Tóm tắt
A sensor interface IC is an integrated circuit that connects physical or resistive sensing elements to an automotive control unit. In this product class, the interface device conditions sensor-related signals and supports communication between sensors and a controller. The TLE6212XUMA1 is associated with ABS, TC, and ESC systems, where accurate wheel-speed sensing is important for braking, traction, and vehicle stability control. Its voltage-input and voltage-output classification distinguishes it from purely digital sensor-interface devices.
The verified distributor information confirms the device family and package, including the PG-LQFP-64 designation. Detailed electrical limits, internal architecture, supported sensor resistance, diagnostic behavior, supply range, and timing specifications were not included in the supplied verified data and must therefore be confirmed against the manufacturer datasheet before design release. The product is presented here with an explicit separation between verified facts and unavailable technical parameters.
Typical automotive uses include ABS wheel-speed sensing, traction-control systems, electronic stability control, and vehicle motion-control electronic control units. The relevant design task is to verify that the selected sensor, wiring, connector, grounding, filtering, and diagnostic strategy all match the device requirements. Automotive production designs should also validate environmental, EMC, functional-safety, and supplier-specific requirements using the manufacturer’s official documentation.
The PG-LQFP-64 package requires a PCB footprint, pin-1 orientation, exposed-pad or thermal-land treatment, and assembly process compatible with Infineon’s package drawing and recommended land pattern. Do not infer pin functions from the distributor category text alone; use the official TLE6212 datasheet and package drawing for schematic capture, PCB layout, and production inspection.
This page consolidates the verified product identity, distributor availability references, package information, application context, and data gaps for engineering review. It is intended to support component selection and sourcing while avoiding unsupported claims about electrical performance, lifecycle status, pricing, or drop-in alternatives.
Bộ thay thế dễ dàng lắp đặt cho TLE6212XUMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếTLE6212XUMA1 Tỷ lệ tối đa & tính chất điện
| Product Type | ABS/TC/ESC sensor interface IC |
| Input Function | Voltage input |
| Output Function | Voltage output |
| Application Association | ABS, TC, and ESC systems |
| Package Designation | PG-LQFP-64 |
| Package Type | LQFP |
| Package Pin Count | 64 pins |
| Manufacturer | Infineon Technologies |
| Supplier Classification | Sensor and Detector Interfaces |
Hướng dẫn cấu hình chân TLE6212XUMA1 64 pins
Cấu hình chân cho TLE6212XUMA1 (64 pins gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TLE6212XUMA1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TLE6212XUMA1 phù hợp cho 6 Áp dụngs: ABS wheel-speed sensing, Traction-control sensor interfacing, Electronic stability control, Automotive brake-control electronics, Vehicle sensor signal conditioning, Automotive sensor diagnostic interface.
ABS wheel-speed sensing
The TLE6212XUMA1 is a relevant candidate for an ABS wheel-speed sensing interface because the verified distributor listing identifies it as an IC sensor for ABS systems. In an electronic control unit, the device would be evaluated as the interface between the sensor signal and the vehicle-control circuitry, with attention to sensor excitation, signal conditioning, fault detection, and wiring. The supplied data confirms the application association and voltage-input classification, but it does not provide the sensor resistance, sensitivity, frequency range, or diagnostic thresholds needed to finalize the circuit.
Được đề xuất
Traction-control sensor interfacing
TLE6212XUMA1 can be evaluated for TC applications because the verified product description explicitly associates the device with ABS/TC/ESC sensor interfaces. A practical implementation would place the interface IC in the TC electronic control unit and connect it to the selected wheel-speed or related sensing element through the manufacturer-recommended network. Designers should verify signal polarity, sensor compatibility, diagnostic coverage, startup behavior, and fault response from the official TLE6212 datasheet before layout or software integration.
Được đề xuất
Electronic stability control
The TLE6212XUMA1 is explicitly linked to ESC systems in the verified distributor classification, making it an ESC sensing-interface candidate for vehicle dynamics control. The engineering value of the part depends on how accurately it supports the selected wheel-speed sensing elements and how its diagnostics integrate with the ECU safety strategy. Before approving it for an ESC application, compare the datasheet electrical limits, temperature range, sensor excitation, latency, and fault behavior with the system requirements and qualification plan.
Được đề xuất
Automotive brake-control electronics
TLE6212XUMA1 is associated with ABS, a foundational automotive braking-control function, and may be considered for brake-system sensor signal conditioning. The device must be assessed within the complete ECU signal chain rather than selected from the application label alone. Important checks include sensor topology, voltage levels, electromagnetic compatibility, diagnostic reporting, connector transient protection, and behavior during open, shorted, or implausible sensor conditions. None of those detailed electrical requirements was supplied in the verified snippets.
Được đề xuất
Vehicle sensor signal conditioning
The voltage-input and voltage-output classification makes TLE6212XUMA1 a candidate for automotive sensor signal-conditioning blocks where the ECU must receive or present controlled voltage-domain signals. Its exact suitability depends on the sensor source impedance, signal bandwidth, voltage thresholds, output loading, and diagnostic architecture. Use the official Infineon documentation to determine whether the voltage interface is intended for the specific wheel-speed or resistance-based sensor architecture used by the vehicle.
Được đề xuất
Automotive sensor diagnostic interface
The TLE6212XUMA1 may be relevant to a sensor diagnostic architecture because ABS, TC, and ESC systems require reliable fault indication and sensor supervision. However, the supplied distributor data does not identify diagnostic pins, open-load behavior, short-circuit detection, or fail-safe outputs. Those functions must be confirmed from the manufacturer datasheet and validated at system level with representative sensors, wiring, fault injection, EMC testing, and vehicle diagnostics.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TLE6212XUMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | PG-LQFP-64 |
| Brand | Infineon Technologies |
| Product Category | Sensor and detector interface IC |
| Input Type | Voltage input |
| Output Type | Voltage output |
| Application Association | ABS/TC/ESC |
| Supplier | Infineon Technologies |
Bảo phân biệt quan trọng
- Application-specific association (vsNo verified alternative MPN)
- Voltage-domain interface classification (vsNo verified alternative MPN)
- Package identification (vsNo verified alternative MPN)
Ghi chú thiết kế
Use the official Infineon PG-LQFP-64 package drawing to establish the land pattern, pin-1 orientation, solder-mask clearance, and thermal treatment before routing. The supplied data confirms only the package designation, not body dimensions, lead pitch, or exposed-pad details. Keep the footprint controlled against the manufacturer’s assembly and inspection requirements, especially because a mechanically similar 64-pin package is not automatically pin-compatible.
Route sensor and diagnostic signals according to the Infineon application guidance and the vehicle wiring environment. The verified snippets do not specify sensor resistance, bandwidth, voltage thresholds, or fault behavior, so those values must be established before selecting termination, filtering, shielding, or protection components. Validate the complete sensor-to-ECU path for noise immunity, transient exposure, grounding, and connector behavior.
Do not treat an ABS/TC/ESC application label as proof that the IC is a universal ABS, traction-control, or stability-control replacement. Confirm the exact sensor type, pin functions, supply requirements, diagnostic behavior, temperature grade, and automotive qualification in the official TLE6212 documentation. Also avoid deriving the footprint from a distributor category string; package and pinout must come from the manufacturer drawing.
Thông tin tuân thủ
The supplied verified data confirms manufacturer, product category, application association, voltage-input classification, voltage-output classification, and PG-LQFP-64 package. It does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, conflict-minerals, lifecycle, or temperature-grade statements.
